Pasting from illustrator

Hi there,
I have a problem with pasting a vector from Illustrator to
Fireworks. It is a section of type, set in Akzidenz Grotesk, and
all the top edges of the letters are blurred at the top (like anti
alias), therefore they are not as sharp as they should be. Does
anyone have a workaround for this?
Many thanks,
Tabrez

Hello. Check this settings:
Photoshop
Preferences > Units and Rulers > Screen Resolutions: 72 pixels/Inch, Point/Pica Size: PostScript;
Image > Image size > Resolution: 72 pixels/Inch;
Illustrator
File > Document Setup > Preset > Custom > Line Art and Text Resolution: 72ppi, Gradient and Mesh Resolution: 72ppi;
Effect > Document Raster Effect Settings > Resolution: 72ppi;

Similar Messages

  • Copy & Paste From Illustrator to Photoshop not matching document size

    I just recently reformated my computer and I've been having an issue with copy and paste from Illustrator to Photoshop. Before I could copy a 2"x2" vector box from Illustrator into photoshop making a new document and the size and resolution would match. That is the new document would say 2"x2" at 300 ppi in photoshop and the preset would read "clipboard". I would then hit ok and paste and it would match perfectly. Now since I've reformated, photoshop always creates a new document with the wrong size regardless of the settings I enter in Illustrator or photoshop. I have document raster and effects set at 300 ppi in Illustrator and I have the new document set at 300 in photoshop, but it always transfers the 2"x2" box as some other size no matter what resolution I change it too. Again this used to work before so I'm assuming there is some setting I forgot about. Does anyone know? The main issue is the clipboard preset is not matching the document size, its almost as if Illustartor is telling photoshop it's a different resolution when it's not. Copying to 72 ppi seems to have no issue, which makes me think Illustrator just isn't sending it out at 300 ppi, but I don't know why as I have the document set at 300 ppi.

    Have you found an answer that wasn't posted here yet? I have the same issue.

  • Is it possible to preserve the layer name when I copy and paste from Illustrator into Photoshop?

    Is it possible to preserve the layer name when I copy and paste from Illustrator into Photoshop?
    At the moment it just appears as "Vector Smart Object" in Photoshop and I have to take another step and change the layer name.
    Thank you!

    Not that I know. PS doesn't care for these kinds of things and uses its own naming system.
    Mylenium

  • Copy & Paste from Illustrator to InDesign CS4

    Hi,
    I am aware that there are issues when copying/pasting from Illustrator to InDesign, in particular:
    http://help.adobe.com/en_US/InDesign/6.0/WSa285fff53dea4f8617383751001ea8cb3f-6bdda.html
    I have the following problems:
    1- I copy and paste text from Illustrator to InDesign on the same platform and some (not all) of the text is converted to outline in InDesign. The same font is available to both applications. Why this behaviour?
    2- I copy and paste objects containing text from Illustrator to InDesign and some of the objects appear to have moved respective positions when pasted into InDesign. Is this to be expected?
    Are there solutions to these problems? Note that if I expand everything in Illustrator prior to copying and pasting into InDesign, none of these issues occur, but everything is obviously in outline form, with the limitations it entails.
    My clipboard settings are as indicated in the link above, but I have tried other settings with no more luck.
    (Important: Before pasting a graphic, make sure that Illustrator is configured to copy as AICB (see Illustrator Help). In InDesign, make sure that Prefer PDF When Pasting isn’t selected in the Clipboard Handling preferences. If these options aren’t set properly, the Illustrator graphic cannot be edited in InDesign.)
    It is not practical for me to create an Illustrator file for each of the Illustrator graphics and import those files via Place into InDesign. I must use Copy/Paste.
    I use CS4.
    Thanks.

    You can copy/paste from Illy to ID by selecting the text with the type tool in Illy and then pasting it into ID. You will not be able to maintain the formatting. If you want to maintain the appearance the text will be converted to outlines.
    If you need to get anything other than very simple objects from Illy to ID then you should save as AI and use the file > place command to place those objects as linked graphics into ID.
    Your closing statement is irrelevant. Whether you like it or not, this is the way it is.
    Bob

  • IDSCS5.5 How to determine if a pageitem was copy/pasted from Illustrator

    Hi,
    My flow is as follows:
    - Open document in IndesignServer
    - (XML)Tag every pageitem with our custom IndesignServer plugin (c++ SDK)
    - If pageItem is a group, tag every member separately
    - save/close the document
    My problem is:
    - If pageitem was copy/pasted from Illustrator and pageitem has a gradient fill => IndesignServer crashes while tagging.
    - Copy/pasted illustrator items with plain colorfills work fine.
    Note that:
    - Copy pasted pageitems from illustrator with a gradient fill are considerated as group in Indesign.
    - The gradient fill of Illustrator is not recognized as such in Indesign ( I could only test with Illustrator CS4).
    - The lack of color information in that situation is not enough to consider the object as "from Illustrator".
    My question:
    - How can i determine if the origin of the pageitem is Illustrator? (I have no control on the creation of the document).
    I know this is a hard one...
    Thanks in advance for any usefull input!
    Bart Devos.

    Hi,
    My flow is as follows:
    - Open document in IndesignServer
    - (XML)Tag every pageitem with our custom IndesignServer plugin (c++ SDK)
    - If pageItem is a group, tag every member separately
    - save/close the document
    My problem is:
    - If pageitem was copy/pasted from Illustrator and pageitem has a gradient fill => IndesignServer crashes while tagging.
    - Copy/pasted illustrator items with plain colorfills work fine.
    Note that:
    - Copy pasted pageitems from illustrator with a gradient fill are considerated as group in Indesign.
    - The gradient fill of Illustrator is not recognized as such in Indesign ( I could only test with Illustrator CS4).
    - The lack of color information in that situation is not enough to consider the object as "from Illustrator".
    My question:
    - How can i determine if the origin of the pageitem is Illustrator? (I have no control on the creation of the document).
    I know this is a hard one...
    Thanks in advance for any usefull input!
    Bart Devos.

  • Unable to copy+paste from Illustrator CC 2014 to Fireworks CS6

    It seems to me like Illustrator CC 2014 is riddled with bugs and compatibility issues. The latest one I have found is that I am unable to copy+paste directly from Illustrator CC 2014 to Fireworks CS6. However it does work when I copy+paste from Illustrator CC 2014 > Illustrator CC (previous version) > Fireworks CS6. Anyone else have this problem?

    View in Illustrator
    Create file in Photoshop CC
    Paste in Photoshop CC
    Create file in Photoshop CS5
    Paste in photoshop CS5
    it's a magic!
    I paste always as Smart Object
    And special for you, create big file in Ps CC
    Paste
    Looking good but
    white 1-Pixel edges are still there, in Cs5 there are no white edges

  • When I copy and paste from illustrator to PS regardless of option choosen the original shape size is lost, instead of true size shape tries to fill entire width. Fix?

    When I copy and paste from illustrator to PS regardless of option chosen the original shape size is lost, instead of true size shape tries to fill entire width. Same happens when using the new library assets.
    Fix?
    Thanks

    Can't always make sense of its effect, but I suspect what your seeing comes under the influence of Photoshop > Preferences > General > Options > Resize Image During Place

  • Paste from Illustrator to Edge Animate (CC 2014) has stopped working.

    Paste from Illustrator to Edge Animate (CC 2014) has stopped working. Gives an 'Error Loading Image!' Any suggestions?

    Hi SujaiS
    I am using both Illustrator and Edge Animate CC 2014.
    Screen shots show a simple test shape in illustrator on the left and the Edge screen when I try to paste.
    Thanks.

  • Pasting from Illustrator to Photoshop is a frustrating experience

    If you paste something from Illustrator to Photoshop, its size won't be at 100%. Why the heck? And why is the "Keep aspect ratio" in Photoshop turned off by default? I have to click that every single time when pasting from Illustrator.
    And why would Photoshop not start ignoring crap outside a mask. I mask stuff in Illustrator for a reason. I want the bounding box to be the mask, not the extent of its contents.
    How hard could it be to finally fix this? How many more versions with more useless new features to be shoved down our throats?

    Hello. Check this settings:
    Photoshop
    Preferences > Units and Rulers > Screen Resolutions: 72 pixels/Inch, Point/Pica Size: PostScript;
    Image > Image size > Resolution: 72 pixels/Inch;
    Illustrator
    File > Document Setup > Preset > Custom > Line Art and Text Resolution: 72ppi, Gradient and Mesh Resolution: 72ppi;
    Effect > Document Raster Effect Settings > Resolution: 72ppi;

  • Is there a reason why I can't copy and paste from Illustrator to Photoshop

    Before the last update, I was able to copy and paste from Illustrator to Photoshop, and now I can't. Which really suck. Is there a new way I would have to do it?

    I'm not privy to what impact the latest update my have had, but I believe Photoshop still has "its own" clipboard, and there may still be a tendency under certain conditions for it to become inaccessible from/to the rest of the system. Reboot everything and try again.

  • Pasting from Illustrator to Photoshop doesn't maintain aspect ratio

    I have vector artwork that is not aligned to a pixel grid in Illustrator. In CS5, I would be able to paste the vector object as a smart object into Photoshop file that was larger than the illustrator image and resize larger while holding shift to keep the ratio the same.
    However with Creative Cloud, if I have a square in Illustrator that happens to be 17.3px by 17.3, then paste to Photoshop in a file that has a larger canvas than the paste, I get uneven horizontal and vertical ratios (width = 18; height = 17). It seems to overestimate the width and make it appear fatter horizontally (which is the wrong aspect ratio). This is very noticeable when vector objects (like perfect circles and small icons) get scaled up in Photoshop.
    I have tried unchecking and checking "Snap Vector Tools and transforms to Pixel Grid" but this doesn't seem to fix it.
    The only way I've been able to get this ratio to be kept is to create a new document with the size automatically changed to clipboard dimensions (which are the desired 17x17). When you paste as smart object, it now uses the correct aspect ratio.

    When you paste an object into Photoshop take a look at your options bar to see if the Maintain Aspect Ratio button is checked. I'm guessing that it isn't which is why Illustrator objects are being pasted at different heights and widths. As you can see in the image below, a perfect circle from Illustrator is being placed in Photoshop at 100.05% and 99.44%. By checking the link button between the two percentages the numbers get locked to the same percentage so that the object is pasted in at the correct dimensions.

  • Image editing in InDesign (copy and paste from Illustrator)

    Hi
    I have a scenario and I hope someone can clarify:
    I work on a Mac using Adobe Illustrator & Indesign CS4. Whenever I copy and paste/drag an image from illustrator to Indesign, that particular graphic is uneditable in InDesign, and that is ok.  I want it like that for the clerk/typists to use in their InDesign files.
    However, on a PC with Vista, when the graphic is copied and pasted/dragged from illustrator to indesign, that graphic becomes editable using the direct selection tool in InDesign.  What I want to know is if there is way to turn this off on the PC version like on a mac?
    thank you in advance
    Dee

    Hi,
    maybe the difference lies with the way Illustrator pastes the images.
    Here with my trusty CS3 in the "File and clipboard preferences" (translated from the french) I have a choice of exporting the clipboard in PDF or AICB.
    If I understand your message I would guess that the Mac exports as PDF and Vista exports as AICB.
    A check of the preferences could help with that,
    good luck.

  • Why can't I copy and paste from Illustrator to Flash?

    I have this silly but frustrating problem. I've drawn a
    series of objects in Illustrator and have copied and pasted many of
    them into separate frames in Flash and all of a sudden they won't
    paste. There are 3 objects I'm trying to paste onto each frame and
    2 of them will paste, but 1 won't. I don't have anything locked and
    I have no clipping masks in Illustrator. They will copy and paste
    in Illustrator. I've tried copy and pasting them separately, I've
    tried opening a new Flash document and pasting, I've tried
    restarting my computer. Does this sound like just another freak
    thing or does anyone have any ideas? Is there some keyboard
    shortcut I might have bumped in Flash to change some hidden
    setting...? But then why is it just 1 of the 3 objects that won't
    paste?
    Any ideas would be appreciated.

    I think I tried all the options and none worked. Even so, the clipboard options say "Clipboard on Quit". That sounds like it has nothing to do with between active programs.
    I'm able to paste from CS5 TO CC though.

  • Copy paste from Illustrator

    Would be also very nice to be able to do Copy-Paste from vector element in Illustrator. The workflow of creating .svg file from every elements is very long.
    Wish to be able to do a copy-paste with an automatic .svg conversion in Edge Animate....

    Hi Jonathan,
    This feature is now available in the latest Edge Animate CC 2014 release. You can try it out.
    Find more information @ Edge Animate Help | New features summary
    Regards,
    Dharmendra

  • Color changes when pasting from Illustrator to Photoshop

    I have set both PS and Illustrator (both latest versions) to "North America Web/Internet".
    Both documents are RGB and have the sRGB IEC61966-1 profile.
    When I copy a square in Illustrator and paste it into PS
    RGB 19,78,110 (the color in Illustrator) changes to RGB 18,78,109.
    It doesn't matter whether I paste it as pixel, smart object or shape layer. The sampled color differs from that in Illustrator.
    Doesn't anyone have a solution to this?
    It's really unnerving when you do web mockups in Illustrator and then copy/paste to PS for image creation.

    This topic is similar to a post today in Mac Photoshop forum. When you copy+paste an Illustrator object with 3D effect from a RGB Illustrator file into an RGB Photoshop document, you get a quite an extreme color de-saturation (looked like a bright blue going dull from RGB to CMYK). Only occurs with active 3D effect. If you Expand Appearance, Flatten Transparency or Rasterize, then the original color is maintained.
    http://forums.adobe.com/thread/863273?tstart=0

  • Copy/Paste From Illustrator CS6 to Photoshop CS6 Issues

    Hi.
    When copying a gradient filled shape from illustrator CS6 to photoshop CS6 an outline "halo" appears in the photoshop image although the shape has no outline to begin with. Is this a clipboard issue? Is it an anti-aliasing setting I can change? Apparently it isn't as noticeable when I drag the shape from illustrator to photoshop as it is when using the copy/paste command. But in both situations there seem to be issues in the border when gradient filled shapes touch other shapes. Please help if you know how.
    Thank you.

    gd2012 wrote:
    Hi.
    When copying a gradient filled shape from illustrator CS6 to photoshop CS6 an outline "halo" appears in the photoshop image although the shape has no outline to begin with. Is this a clipboard issue? Is it an anti-aliasing setting I can change? Apparently it isn't as noticeable when I drag the shape from illustrator to photoshop as it is when using the copy/paste command. But in both situations there seem to be issues in the border when gradient filled shapes touch other shapes. Please help if you know how.
    Thank you.
    In Illustrator, try a blue shape underneath the butted-together rotated rectangles so seams do not become apparent when rasterized.

Maybe you are looking for