Pasting text into a text layer in Photoshop CC 2014

I've been playing around around with Photoshop CC 2014 HTML5/Javascript extensions (CEP5) for a while now and I came across a problem I couldn't solve: how to paste text in an existing text layer when the user is editing the text? Using evalScript and app.activeDocument.paste(); works fine when pasting copied pixels as a new layer, but if the user is on a text layer editing the text (and I want the extension to paste text there), it throws an evalScript error.
Am I doing something terribly wrong or what? The next thing I thought was to invoke paste event and try it that way.

I only see the normal texture filtering. Seems like you have a fundamental misunderstanding here about how 3D works - "pixel perfect" has no meaning for 3D textures since UV space is parametric and has by itself in theory infinite resolution, so any texture will be fit into this range and inevitably a single pixel in the texture can cover more than a pixel on screen or more than a square milimeter on a 3D object. If you want "sharp" textures, you increase the texture resolution, which, if you realyl want that pixely look would be doen using the nearest neighbor method. Regardless, once you zoom in at some point you will see fuzzy edges/ pixels again. It's in the nature of the thing.
Mylenium

Similar Messages

HowDoI copy a phone number from a contact and paste it into a text

Z10 HowDoI copy a phone number from a contact and paste it into a text message?
Help Please. It should be so simple but in the maze of approaches to contacts from the phone or home screen which ever way you get there; how do I select a phone number, copy it and paste it into a text message to another contact so that I can send it on?
The logic of the interface is totally baffling to me most of the time. Can't there just be one contacts interface so that when you enter it from anywhere it presents the same options to edit etc. Cannot the three blobs be called up to allow a proper edit menu - copy/cut/paste/delete.
Can the favourites be held permanently in screen at the top with the rest of the contacts scrolling below them?
Can it be set up so that contact pictures do not show to save screen space?
Any help on any of these - much appreciated.
Solved!
Go to Solution.

Hey jbee,
Welcome to the BlackBerry® Support Community Forums.
How Do I copy a phone number from a contact and paste it into a text message?
The only option would be to to select the edit option on the contact and hold your finger on the number and select the copy option on the left side panel.
Can the favorites be held permanently in screen at the top with the rest of the contacts scrolling below them?
This feature is currently not available.
Can it be set up so that contact pictures do not show to save screen space?
This feature is currently not available.
Let me know if you have any other questions.
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How do I copy a photo from iPhoto and paste it into a text/Pages document?

How do I copy a photo from iPhoto and paste it into a text/Pages document (using iMaC)?

Use the Media browser in Pages and just drag the image over.

Why can't I paste anything into the Text window any more

Hi Laura,
Why cant I paste anything into the text window any more? I am using IE 7.0 (7.0.5730.13C0)
Regards
Ray Farmer

I've seen some weird (temporary) cases, for example when ctrl+v suddenly did not work, but "right-click..paste" was still working. Also, when I was pasting the comment here, notice that the last line containing the date (i.e. the line containing May 27, 2011) moved to the top of the quote, while it was at the botton in the original location (probably soem extra html got dragged along, I have not investigated).
(This was in Chrome.)
LabVIEW Champion . Do more with less code and in less time .

Why can't I create a document in my Facebook group on my iPad? It won't let me input any text into the text box field after I create a new document. Thanks.

Why can't I create a document in my Facebook group on my iPad. It won't let me input any text into the text box field after I create a new document. Thanks.

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Copying a standard text into another text in so10

Hello Gurus,
I have an issue where i need to track offer letter,i have a standard text which is been automatically used in pb40 while generating offer letter and that is ww-offer-contract in which i need to change the code ( in textid palt )but it is read only document. i need to copy the text into another text.So that i can do the changes required in that.
If i go with Utilities-->copy from client then it is allowing me to copy but not allowing me to change into it.it is giving me the dump.Since it is asking for the permission,i went for stop protection.but still it is giving me the dump.
Any one plzz help me out with this.
Thank you all.
Edited by: BHAVANI MADIREDDY on Feb 12, 2008 12:34 PM

There is a selection screen parameter
parameters: par_bi like rfpdo1-f100buch default ' '.
Comment this and declare a variable and pass 'X' or space into that as per the requirement.

Feature Request: overflow text (threading text into another text box) as in InDesign

I would like to see overflow text (threading text into another text box) as in InDesign

Brilliant. Thanks for the reply. The file I'm using is the same one I've been using as a emplate for about 3 years now, but I've recently upgraded to Windows 8 and re-installed my copy of InDesign onto that, so I could have inadvertantly flicked one of these settings on during setup.
I'll look through the properties or something and see if I can find the language settings.
Thanks Steve, I appreciate your help. :-)

Cannot paste text into a text layer in Photoshop

Since a couple of days ago I cannot paste text into a photoshop text layer from any other source, like safari, word etc.
I get an "popup error"-window in swedish (my language) saying something like "Could not complete the paste text command because the clipboard data was invalid or missing."
Anyone having the same issue? Or maybe a fix on the problem? Of course i've tried restarting photoshop and also the computer. Running Mac OS X Yosemite and the latest Photoshop CC 2014.

Well I can't paste any text into any DW document, file, blank, page name, nothing
The paste command does not work in DW
I have deleted corrupted cache
I have tried Restore Preferences
Nothing allows me to paste text in any format from any file format period.

Error when pasting 1K of text into a text area of tabular form

This appears to be a bug to me, put please offer suggestions if you have them....
Using apex with XE, I have created a table with two varchar2(4000) columns in them. The user will paste large blocks of text into one or both of them (e.g paste text copied from e-mail).
I created a tabular form and set the two fileds to display as "text area". Insert and/or update works fine unless I paste more than about 1 to 1.5 kbytes of text into one of these fileds, in which case I get a page not found error with the following URL:
http://127.0.0.1:8080/apex/wwv_flow.accept
After the error page displays, I can hit the back button and then remove just enough text to get it to under the 1 to 1.5 kbytes and then either insert or update works fine.
One more bit of info. If I create a single row form then it works fine, it is only the multi-row tabular form that seems to have this issue.

I don't think the character set is the problem. I used a string of numbers 0123456789 and just copied and pasted it repeatedly to build up the text. The database character set is WE8MSWIN1252.
Regarding the apache log. I have to admit that I don't even know if I'm running apache. I am using a newly installed Oracle XE on a laptop in order to get some experience with application express. This app is the first one I've done. If someone will direct me to the log then I'll be glad to check it and post the relevent contents.
I signed up for an apex workspace and intend to see if I can recreate the error from there so I can see if the problem is just in the free version of apex that comes with the Oracle Express Edition for windows database.

How load text into dynamic text boxes from external file?

hi all,
my animation is very simple - a background image and 2 text boxes. one of the textboxes shows a large word, which crossfades to another word, with a total of about 12 words (showing one at a time in different text boxes fading in & out in the same spot).
i need a way to have the text be imported dynamically via xml or json (xml preferred). this article is a good start, but i noticed he's putting all of the text into one box - i need separate strings put into separate boxes from the xml.
Chris Gannon - Loading XML via AJAX into Adobe Edge
he uses
var outputField = $(this.lookupSelector(“xmlOutput”));
for his text box. what would be the best way to revise this code to include all my individual strings to be loaded into my individual text boxes? thinking an array might work, but my js skills are limited.
any other suggestions or tutorials you could point me to would be appreciated.
thanks!!

thanks joel_pau !
this is helpful in seeing how the array is created, but after giving it a go I became a little confused.
i wound up trying it again based on the example i linked out to previously, but it's not adding the text from my xml file when previewing.
here's the code i'm using in edge animate on my stage. something must be wrong somewhere. let me know if you have any suggestions on this.
// insert code to be run when the composition is fully loaded here
// here i'm assigning a variable to each one of my textboxes at they're named in my edge animate comp
var outputField1 = $(this.lookupSelector("helps2"));
var outputField2 = $(this.lookupSelector("communicate"));
var outputField3 = $(this.lookupSelector("experience"));
var outputField4 = $(this.lookupSelector("interact"));
var outputField5 = $(this.lookupSelector("understand"));
var outputField6 = $(this.lookupSelector("overcome"));
var outputField7 = $(this.lookupSelector("flourish"));
var outputField8 = $(this.lookupSelector("collab"));
var outputField9 = $(this.lookupSelector("trust"));
var outputField10 = $(this.lookupSelector("grow"));
var outputField11 = $(this.lookupSelector("engage"));
var outputField12 = $(this.lookupSelector("survive"));
var outputField13 = $(this.lookupSelector("thrive"));
var outputField14 = $(this.lookupSelector("evolve"));
var outputField15 = $(this.lookupSelector("connect"));
var outputField16 = $(this.lookupSelector("achieve"));
$.ajax({
    type: "GET",
    url: "myxmlfile.xml",
    dataType: "xml",
    success: function(xml) {
//here i'm trying to load the the text in my xml file into my textboxes in edge animate. 'txt1, txt2, txt3' are the tags in my xml file
        outputField1 = $(xml).find('txt1').text();
        outputField2 = $(xml).find('txt2').text();
        outputField3 = $(xml).find('txt3').text();
        outputField4 = $(xml).find('txt4').text();
        outputField5 = $(xml).find('txt5').text();
        outputField6 = $(xml).find('txt6').text();
        outputField7 = $(xml).find('txt7').text();
        outputField8 = $(xml).find('txt8').text();
        outputField9 = $(xml).find('txt9').text();
        outputField10 = $(xml).find('txt10').text();
        outputField11 = $(xml).find('txt11').text();
        outputField12 = $(xml).find('txt12').text();
        outputField13 = $(xml).find('txt13').text();
        outputField14 = $(xml).find('txt14').text();
        outputField15 = $(xml).find('txt15').text();
        outputField16 = $(xml).find('txt16').text();
but nothing happens on preview. my textboxes still contain the original text that lives in my comp.

Defaulting Standard Text into Vendor Text

Hello,
We have been asked if we can add functionality similar to the S010 standard texts in R/3, so that a SRM user can select from a list of standard texts. The text would default into the Vendor Text on the Shopping Cart, the user would be able to amend the text if required.
Does anyone know if this is achievable? I assume it would have to be done via a BADI?
Thank you.
Kind Regards,
Jackie Jones

Hello Jackie,
Use text schema to achieve your request: you can define fixed values for texts.
In SRM 7.0 release, it is in IMG:
SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Text Schema
I think path is the same for lower releases.
If you use fixed values, this means vendor text coming from your catalog has to make part of your fixed values.
Regards.
Laurent.

Is there a software for InDesign that will translate my english text into spanish text

I have InDesign files in English text. Is there a software that will translate text into Spanish?
Thanks,
Sharon

It's well worth paying someone who knows both languages well to do the translating.
With software translation, at best, you get a rough translation. At worst, (especially when you can't read the language you are translating to), you could get something like this:

Copy Header texte into Item text, trasactions FB60-FB50-FB70

Hi,
using the transactions FB50, FB60 and FB70 I need to copy automatically the Header text into the Items text.
Can someone tell me how to do that?
Thank you and best regards,
Giorgia

In the enjoy transaction like FB60-FB50-FB70, header and line items fields are quite mixed up. When you are mentioning Header text, please confirm that you meant "Header text" field in the "Details" tab screen and not the "Text" field in the basic data tab screen.
Normally when you want to copy the "text" field content in the Basic Data screen to all the G/L line items text fields, you do it through "editing option" in the FB60-FB50-FB70 transaction screen itself. Here in the General entry options you activate the check box "Copy text for GL account enter".
But if you want to copy really the header text in the Details screen to Vendor and Gl items for example, then you have to create substitution rule
Thanks
Ranjit

Export Text into Infotype text cluster

Hi,
I am trying to insert some text into the infotype text (Edit -> Maintain Text) for infotype 40 programmatically.
I have written the sample code below but the text is not inserted into the infotype. Can someone advise me what could be wrong with the code ?
Many thanks in advance.
Regards
KC
=============================================
REPORT ZTEXTO .
TABLES : PERNR, PCL1, pcl2.
INFOTYPES : 0040.
INCLUDE RPPPXD00.
DATA : BEGIN OF COMMON PART BUFFER.
       INCLUDE RPPPXD10.
DATA : END OF COMMON PART BUFFER.
INCLUDE RPC1TX00.
GET PERNR.
   LOOP AT P0040.
     MOVE-CORRESPONDING P0040 TO TX-KEY.
     REFRESH PTEXT.
     PTEXT-LINE = 'THIS IS A TRAIL INSERT INSERT INTO INFOTYPE TEXT'.
     APPEND PTEXT.
     RP-EXP-C1-TX.
   ENDLOOP.
   PERFORM PREPARE_UPDATE USING 'V'.
BUFFER ADMINISTRATION ROUTINE.
INCLUDE RPPPXM00.

Hi,
I have this same issue. I have the infotype field ITEXT is set to 'X'. I am trying to update the record in infotype 0672. I am using the following code, it executes well. But it is not updating the infotype with the text.
REPORT zven_insert_text_infotpe                .
TABLES : pernr, pcl1, pcl2.
INFOTYPES : 0672.
Data: gs_0672 TYPE STANDARD TABLE of pskey with header line.
INCLUDE rpppxd00.
DATA : BEGIN OF COMMON PART buffer.
INCLUDE rpppxd10.
DATA : END OF COMMON PART buffer.
INCLUDE rpc1tx00.
gs_0672-pernr = '00010053'.
gs_0672-infty = '0672'.
gs_0672-subty = '0001'.
gs_0672-endda = '04042005'.
gs_0672-begda = '04042005'.
append gs_0672.
clear gs_0672.
*GET pernr.
LOOP AT gs_0672.
    MOVE-CORRESPONDING gs_0672 TO tx-key.
    REFRESH ptext.
    ptext-line = 'THIS IS A TRAIL INSERT INSERT INTO INFOTYPE TEXT'.
    APPEND ptext.
    rp-exp-c1-tx.
ENDLOOP.
perform prepare_update using 'V'.
include RPPPXM00.
Please let me know ASAP.
Appreciate.
Thanks.
vgoy

'Inserting' text into a Text Field on event trigger in a static form

Sorry if this seems like a silly question, but I've been struggling with it for a bit and I'm new to Adobe/JavaScript.
I am building a static form (it must be static), and I want to have text appear/disapear based on an event trigger (mouseclick). I tried creating a floating text object inside of a static text object, but I'm not sure how I can make the string value for this change based on the event trigger. The only advice in the Adobe help was purely regarding FormCalc, which I can't use as this must be a static form. I tried using this code in the <script>, but it obviously didn't work as it was written from FormCalc code versus JaveScript;
TextField.rawvalue = variable.value;
What do you suggest in terms of being able to script this, so my static form will work? Thanks a billion if you can help!
PS: I'm using Adobe 9, LiveCycle ES 8.2
PPS: Also tried inserting the following into my trigger script;
xfa.resolveNode("form1.subform.TestField").rawValue= "Please Work";
xfa.layout.relayout("form1.subform.TestField");
It also did not work.

Hi,
If the button and the textfield are on in the same subform then this code should work in the click event of the button
(This is JavaScript code so make sure the code is set to JavaScript and Client on the drop downs in the script window)
(assuming the name of the textfield is TextField1)
TextField1.rawValue = "some value";
If they are in different subforms then you have 2 options
Please note in both these options it is easier if the subforms have names ( I am assuming this to keep samples simple)
option 1 -
use the parent object to move up the tree till you are at the same level as that of the subform that contains the textfield
e.g.
(Click Event of the button)
this.parent.subformname.TextField1.rawValue = "some value";
option 2 -
Use the resolve node to make your way down from the top level of the form
xfa.resolveNode ("form1.subformname.TextField1").rawValue = "some value";
Hope this helps
Malcolm
p.s. I am making assumptions as the image/file you attached did not appear for me.

Pasting text into a text layer in Photoshop CC 2014

Similar Messages

Maybe you are looking for