PAT Limits and monitoring - ACE-20

Hi Guys,
Is anyone able to confirm the PAT limit on the ACE-20s please. I initially read it as 1 million (the NAT limit), however I have since read that for PAT, its 4 million as it uses the connection record information and not xlate.
I've always wondered why the xlate line under 'show resource usage' is zero. If PAT does use the connection record then this would explain why, however its confusing as when running a 'show xlate' command you do see all the current PAT entries.
Thanks for any assistance.

Hi Adnan,
If it helps this is where I first found reference to the 4million PAT entries
http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_(ACE)_Troubleshooting_Guide_--_ACE_Resource_Limits
Its in the table under the 'Security-Related Limits' heading
HTH
Steve

Similar Messages

No screensaver and monitor sleep mode

Hello guys,
I have the following problem with my Mac Pro (Early 08) and MacBook Pro 2.33 GHz. Both are Mac OS X 10.5.4.
I have installed the latest Security Update 2008-005. After installation both computers have similar problem with Screensaver and display sleep mode. Both simple don't start. I mean that my laptop and desktop computer don't start screensaver and after some time they don't turn off attached monitor (respectively built-in display).
I also tried to change time of both things (screensaver time and "monitor sleeping mode" time) to different time. I also restarted both computers few times already.
My laptop seems working after these "changes and restarts", but Mac Pro doesn't. Monitor is always on.
Please, do you have any info regarding this? I am quite possitive it was caused by mentioned security update, since before that update, both worked perfectly.
Thank you for any help.

Welcome to Apple Discussions.
Create a new account, name it "test" and see how your monitor and screensaver work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
If the problem is present in the test account also, then it is systemwide. In this case try repairing this with the 10.5.4 Combo Update . This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
If the problem does not appear in the test account try starting in "Safe Mode" (It will take a bit more time to startup because it runs a directory check first).
If that works go to System Preferences >> Accounts >> Login Items and remove them. Boot normally and test. If there are still problems, go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving /Users/Home)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
Let us know.
-mj
Message was edited by: macjack

SFDM Tool (Shop Floor Dispatching and Monitoring), Technical questions

Hi Everybody,
i am very excited to change knowledge here on the SCN.
Right now I am analyzing the SFDM Tool (Shop Floor Dispatching and Monitoring) and need some more Information, which cannot be found via Internet research. I hope someone, who is familiar with the technical details can support me with answers.
1. Master Data:
- How does the Interchange of master data (such as machine capacities in terms of time/quantities or number of available machines) work between the SFDM and the ERP System?
- Is there a permanent interface between the SFDM and the master data in the ERP System?
- If so, which of the master data are communicated?
- Are there any limitations?
- Do BAPIs (Business Application Programming Interface) play a role?
- Is any further master data maintenance necessary, if the customer wants to implement SFDM?
2. There is a backend component situated in the ERP System called "SFDM on ABAP 1.0". What is the aim of this component?
3. Does the SFDM work with algorithms? If so, why?
4. Does the SFDM consider other machines in the same production plant?
5. Does it work over HANA?
6. Any further functionalities or restrictions?

Hi
i wouldn't recommend SFDM for performance problem solving, if this is the issue you are facing.
If this is because planners are "lost" with CM25 because of problems for Production Orders selection and so-on, then try SFDM.
There is no new functionality compared to CM2x transactions within ERP.
The benefits are clearly focused on design and user-friendliness:
interactive logs
easy configuration of settings and strategy compared to CM2x TCodes
accessible details
Please keep also in mind the fact that this is working for individual capacities (cf. Rough Guide) and related constraints in terms of capacity category (only 0001 is supported).
Best regards.
Pierre-Edouard

Number of connection to this computer limited and all connections are in use right now

I have Lenovo ThinkPad T520 (i7, NVIDIA 4200TM) with dock station and two monitors. Sometimes when I close notebook and undock it from dock station. Then I cannot login to my notebook because of error "Number of connection to this computer limited and
all connections are in use right now". This is screenshot of my laptop http://i.imgur.com/6MXnQKf.jpg
Laptop is not in domain and does not have remote desktop connections. It was just turned in sleep mode and late turned on.
This happen pretty often one from 10..20 times of undock. It did not happen with Windows 7 before.

The network does not work properly after you resume the computer. This kind of issues are cuased by the network device driver. Download the latess Windows 8 driver from Lenovo website and install it.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Lync Standard Edition Server pairing -- Archiving and monitoring collocated but Single SQL backend

Hi,
I have a scenario where in ---we have Two Standard Edition Servers ( SE1 and SE2) with 1K users each ( Total 2K in one Site) paired to enable High Availability. The Standard Edition Server has archiving and monitoring and mediation server collocated.
For archiving + monitoring database we have a Seperate SQL enterprise edition server.
Quetions:
1. Can we use single SQL Enterprise Edition as backend for (archiving and monitoring ) for both SE1 and SE2 ?
2. If yes, do we need two seperate instances?
3. If not, could you please suggest the best possible solution in such an environment ?
Regards,
Archana Rao

Hi ArchanaVR,
Agree with Michael, and add some more details.
By default, the SQL Server Express back-end database is collocated on the Standard Edition server. You cannot move it to a separate computer. With one exception, you cannot collocate other databases on the Standard Edition server. If you choose to deploy
Persistent Chat Server on a Standard Edition server, you can collocate the Persistent chat database and the Persistent Chat Compliance database on the same Standard Edition server.
You can collocate each of the following databases on a single database server:
Monitoring database
Archiving database
A back-end database for an Enterprise Edition Front End pool
You can collocate any or any or all of these databases in a single SQL instance or use a separate SQL instances for each, with the following limitations:
Each SQL instance can contain only a single back-end database (for an Enterprise Edition Front End pool), single Monitoring database, single Archiving database, single persistent chat database, and single persistent chat compliance database.
The database server cannot support more than one Enterprise Edition Front End pool, one server running Archiving, one server running Monitoring, single Persistent Chat database, and single Persistent Chat compliance database, but it can support one of each,
regardless of whether the databases use the same instance of SQL Server or separate instances of SQL Server.
http://technet.microsoft.com/en-us/library/gg398131.aspx
Best regards,
Eric

Shipping the G4 and monitor

I am curious to know if any one else shipped their G4 and monitor recently and whether they did it by Fed Ex air or ground and how much it cost, even approximately.

As one who buys G4s (to refurbish and resell) shipped from all over the country, I can volunteer a few thoughts.
Fed Ex trucks are smaller than UPS, but they seem to do the job.
The cost I wind up paying for seems to be about $25-30 if the customer does the packing. If you pay to have it done, add $50. If you no longer have the original box, get a large, stout box and use lots of bubble wrap and/or plastic peanuts. Macs travel pretty well.
A CRT monitor is a different story; they DON'T travel well. Back when I bought several and had them shipped, the toll was $50-100 and I tended to lose about half. They are heavy, but mostly, they are unbalanced (front-end heavy), and that means they get dropped, or roll off the top of a six-high stack. They need to be packed sitting on their base, and off-centre in their box, so that their weight is centred within the box. If you have the original box, you might try, but unless you're an expert, give yours away at your end and buy another at the destination.
My limited experience experience with flat screen displays suggest they travel pretty well.
HTH .... Jon

What is the best product for network mapping and monitoring? I am an inexperienced user). Mac 10.9.2 laptop

I have lots of questions, but the gist is that I want to know the best product, preferably from the app store, that I can use for network mapping mapping and monitoring.
I want to get their mac address or other police trackable etc info so I can use my computer safely.
I am also being cyberbullied.
I try just using ethernet but still get intruded on, for instance, messages that "other devices are using my ip address". The only other device I own is an iPod that I keep sahut off plus wifi turned off then.
(NOTE: You can skip the rest of this message if you want. It regards hacking attempts etc, a little out of the scope of discussion, perhaps).
Also a home intrusion where computer was thoroughly hacked with router(s) set up "very very close to me," according to Apple.
Also, hackers get into my Facebook and gmail and yahoo mail, really, no matter what I try to do on my computer and how many times I change passwords it does no good.
Also, The ip addresses for google and the one in syste preferences and the one looking up my ip address on ip chicken always gets three different results.
More worrisome it that hackers got into my Wells Fargo account a week after the intrusion even though I changed all account #'s and pw plus notified bank. They also broke into paypal using my new account numbers.
Also, stuff like Facetime pops up on my computer without my clicking on it even though I'm using ethernet to connect. I've given up on Time Capsule because I'm told that's how the hackers hacked my computer so thoroughly duriung the intrusion.
Thanks.

Aubry,
why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
G.

Create Remote Control and Monitor VI

Hi all,
I have 2 VIs. One is PC Host VI and other is cFP2200 real-time running VI.
Now I can use PC host and cFP shared variable to control and monitor in the same network.
But I have a problem that I need 2 or more cFP in the same network.How can I seprate to control themone by one?
They are using the same program but set with different IP.
Does shared variables are using fix IP and can I type the cFP2000 network IP in PC Host VI to select different cFP?
How to do ?
Thanks.
Robert

Hello Robert,
You will need to use a separate shared variable for each cFP. You can create a Case Structure in your Host VI to select which shared variable to use based on which cFP you select. I think that's the simplest option for you.
There is also a way to programmatically change the data binding for a shared variable, but this requires the DSC Module. Take a look at this article if you want to check out this option: http://digital.ni.com/public.nsf/allkb/2E8BAD0EA218A7558625712E0003F044?OpenDocument
Product Support Engineer
National Instruments

How to connect an external hard drive and monitor a single port thuderbolt

how to connect an external hard drive and monitor a single port thuderbolt

Yu connect the HDD to your Mac and then the monitor to the HDD.
The HDD should have TWO T-Bird ports on the enclosure.
Its called daisy chaining and up to five devices can be connected in this fashion.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture. The Apple icon, usually at top left corner, appears in to

have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

How to install the windows7 agent and monitor the same machine

Hi ,
I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
Can you please guide me how to install the agent on windows and monitor the same?
OEM version: 11.1.0.1
Thanks in advance
Regards,
Kishore Tummeti

If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
Eric

Performance analysis and monitoring of a Forteapplication

Hello,
It would be good if one could do some performance analysis and monitoring of
a Forte application at production time.
By performance analysis I mean measure the time some selected methods take
to return. In a CS application such a method would be some selected method
of a key remote service representative of the application's activity.
One would like to mesure the min, max, average time, and also give a
threshhold which when reached will automatically generate an alarm or some
pre-defined processing.
The most powerful way would be to use a SNMP application through a Forte -
SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
in the 96' Forte Forum proceedings).
But before going that far some simple means accessible through EConsole
would already be great.
A collegue of mine when to that Forum and reported that Puterbaugh said that
such an agent is currently missing, but that its implementation is not
difficult.
I looked at all the agents and their instruments. I came to the following
conclusions :
1) instrumented data are available at the granularity level of a partition,
not at a smaller granularity. For example, the DistObjectMgr agent gives you
very useful information : the number of events (sent/received) and the
number of (remote) methods (called/invoked), but this for the entire
partition. Thus it prevents making tuned observations (unless you partition
in a special way your application to put in a dedicated partition the thing
you want to observe and only this thing).
2) there is no instrumented data related to processing time.
This leads me to the point that no information observed by the standard
agents help me figuring out my performances. Thus I have to add at
development time some lines of code to the methods I potentially want to
observe later at production time to generate the appropriate information a
custom agent will then display (process) with the appropriate instruments.
Does someone share this position ?
Has someone implemented such an agent and assotiated means ?
PS: I will probably implement my own one if no other way around.
best regards,
Pierre Gelli
ADP GSI
Payroll and Human Resources Management
72-78, Grande Rue, F-92310 SEVRES
phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
fax : +33 1 41 14 85 99

Hello,
It would be good if one could do some performance analysis and monitoring of
a Forte application at production time.
By performance analysis I mean measure the time some selected methods take
to return. In a CS application such a method would be some selected method
of a key remote service representative of the application's activity.
One would like to mesure the min, max, average time, and also give a
threshhold which when reached will automatically generate an alarm or some
pre-defined processing.
The most powerful way would be to use a SNMP application through a Forte -
SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
in the 96' Forte Forum proceedings).
But before going that far some simple means accessible through EConsole
would already be great.
A collegue of mine when to that Forum and reported that Puterbaugh said that
such an agent is currently missing, but that its implementation is not
difficult.
I looked at all the agents and their instruments. I came to the following
conclusions :
1) instrumented data are available at the granularity level of a partition,
not at a smaller granularity. For example, the DistObjectMgr agent gives you
very useful information : the number of events (sent/received) and the
number of (remote) methods (called/invoked), but this for the entire
partition. Thus it prevents making tuned observations (unless you partition
in a special way your application to put in a dedicated partition the thing
you want to observe and only this thing).
2) there is no instrumented data related to processing time.
This leads me to the point that no information observed by the standard
agents help me figuring out my performances. Thus I have to add at
development time some lines of code to the methods I potentially want to
observe later at production time to generate the appropriate information a
custom agent will then display (process) with the appropriate instruments.
Does someone share this position ?
Has someone implemented such an agent and assotiated means ?
PS: I will probably implement my own one if no other way around.
best regards,
Pierre Gelli
ADP GSI
Payroll and Human Resources Management
72-78, Grande Rue, F-92310 SEVRES
phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
fax : +33 1 41 14 85 99

How to give browse and monitor only options of an ICM script to a certain group?

I am looking for an option in the Feature Control Set, how to give "Browse and Monitor" only options for a certain group in our contact centre. If someone give me some clue, it would be appreciatable.

Hello Praveen,
This work at some point. But it's not resolving what I intend to do. When I give "Read Only" previledge, to the certain group, it won't be able to do other tasks what they do day to day. I am looking specifically to give read only previledge in the scripting level. Not at the configuration level.
Thanks.

Mapping and Monitoring all the User and the Field exits

Hello Dears,
Are possible, with the Solution Manager to map and monitor all the user and the field exists existing in my ECC6 Productivity Environment?
Anyone has some documentation?
Regards to all.
FS.

Hello Gurus,
Someone has any information about this question?
Regards to all.
FS.

PAT Limits and monitoring - ACE-20

Similar Messages

Maybe you are looking for