PATCH 1.6.1 PROBLEM!

I've installed the patch 1.6.1.
Now I have a serious problem:
When trying to import an application or to upload an image in the demo application I get the error:
http://orka.zeeland.nl:7778/pls/htmldb/wwv_flow.accept
The page cannot be found
My DAD is as follows
[DAD_htmldb]
connect_string = orka:1521:spro
default_page = htmldb
document_table = wwv_flow_file_objects$
document_path = docs
document_proc = wwv_flow_file_mgr.process_download
reuse = Yes
enablesso = No
statefull = STATELESS_RESET
nls_lang = AMERICAN_AMERICA.WE8MSWIN1252

[Fri Mar 04 10:48:51 2005] [warn] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-404 ORA-00942: table or view does not exist
[Fri Mar 04 10:51:46 2005] [notice] FastCGI: process manager initialized
[Fri Mar 04 10:51:46 2005] [warn] FastCGI: server "d:/oracle/ora9idb/bin/isqlplus" started (pid 1896)
[Fri Mar 04 10:52:25 2005] [warn] mod_plsql: Stale Connection due to Oracle error 942
[Fri Mar 04 10:52:25 2005] [error] mod_plsql: /pls/htmldb/wwv_flow.accept ORA-942
ORA-00942: table or view does not exist
[Fri Mar 04 10:52:25 2005] [warn] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-404 ORA-00942: table or view does not exist
[Fri Mar 04 10:54:46 2005] [warn] mod_plsql: Stale Connection due to Oracle error 942
[Fri Mar 04 10:54:46 2005] [error] mod_plsql: /pls/htmldb/wwv_flow.accept ORA-942
ORA-00942: table or view does not exist
[Fri Mar 04 10:54:46 2005] [warn] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-404 ORA-00942: table or view does not exist
[Fri Mar 04 10:56:31 2005] [notice] FastCGI: process manager initialized
[Fri Mar 04 10:56:31 2005] [warn] FastCGI: server "d:/oracle/ora9idb/bin/isqlplus" started (pid 1952)
[Fri Mar 04 10:57:04 2005] [warn] mod_plsql: Stale Connection due to Oracle error 942
[Fri Mar 04 10:57:04 2005] [error] mod_plsql: /pls/htmldb/wwv_flow.accept ORA-942
ORA-00942: table or view does not exist
[Fri Mar 04 10:57:04 2005] [warn] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-404 ORA-00942: table or view does not exist
[Fri Mar 04 10:58:49 2005] [notice] FastCGI: process manager initialized
[Fri Mar 04 10:58:49 2005] [warn] FastCGI: server "d:/oracle/ora9idb/bin/isqlplus" started (pid 1752)
[Fri Mar 04 10:59:23 2005] [warn] mod_plsql: Stale Connection due to Oracle error 942
[Fri Mar 04 10:59:23 2005] [error] mod_plsql: /pls/htmldb/wwv_flow.accept ORA-942
ORA-00942: table or view does not exist
[Fri Mar 04 10:59:23 2005] [warn] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-404 ORA-00942: table or view does not exist
[Fri Mar 04 11:07:39 2005] [warn] mod_plsql: Stale Connection due to Oracle error 942
[Fri Mar 04 11:07:39 2005] [error] mod_plsql: /pls/htmldb/wwv_flow.accept ORA-942
ORA-00942: table or view does not exist
[Fri Mar 04 11:07:39 2005] [warn] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-404 ORA-00942: table or view does not exist

Similar Messages

  • Looking to get the patch for OC4J MDB problem

    I am looking to get the patch to fix the problem with oc4j 9.0.2.
    The problem can be replicated very easly by forcing MDB to raise the EJBException or
    calling setRollbackOnly() in the onMessage method. At this point the container should send a rollback
    message to the provider. Intead its erroring out. Can I get a definite date when we will be able to
    download the patch and if the 9.0.3 will fix this problem?
    Regards,
    Mark.A

    Hi Mark,
    I recall (I think it was on this forum) someone saying that the
    9.0.3 production version of OC4J should be released by the end
    of August, and that the problem you mention is fixed in that version.
    I don't work for Oracle -- so don't quote me -- I'm just relaying
    information I have picked up.
    I get the impression that Oracle are not going to release a patch
    before releasing the 9.0.3 production version.
    Good Luck,
    Avi.

  • Solaris8+patch display refresh rate problem

    I have installed the 109401-05 video patch for Solaris8 to update the video
    card drivers. But now at 1600x1200 screen resolution the maximum display
    refresh rate is always 60Hz, altough higher settings in kdmconfig. The behaviour is similar at 1280x1024, but the max. rate is 80Hz. I have tryed
    this with the ATI Xpert2000pro and Xpert98 graphic cards.
    Without the patch the refresh rate is OK (with the Xpert98 card). The
    motherboard is Abit KT7.
    Does anybody know what could be the problem?
    Thanks, Albin

    Hmm, if the refresh rate was OK before you installed the 109401-05
    video driver patch, why don't you uninstall that patch? Or do you
    need some other bugfix included in 109401-05?
    Otherwise the 60Hz problem problem with certain old ATI cards is not unknown to me:
    See this Solarisonintel posting for a possible solution.

  • IPhoto editing results in black patches on photos - new problem

    Hello everyone - I am experiencing a brand new problem with iPhoto editing.  Have used the editing feature for four years without incident.  Since upgrading operating software a few weeks ago, I now experience sudden blackout patches on photos as soon as I click on the "Adjust" setting in the "Edit" mode.
    Here are a few details on my set-up and problem:
    iPhoto version: iPhoto'09 - Version 8.1.2
    Operating System: OSX Version 10.9.1
    Details - Black rectangular patches appear in either sections of photos, or completely obscure the photo whenever I click on "Adjust" in the "Edit" mode.  Only way out of this situation is to hit "Escape" key
    Did it every work properly?  Yes, for four years I never had any problems.  Liked the ease of the editing features in iPhoto.  Very recently upgraded operating system to version noted above.  Problem occurring since that time. 
    Error message? No
    What steps taken to date? None yet - Seeking assistance through this forum.  Thanks in advance. 

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

  • ITS 6.20 patch 18 ALV Grid problems

    Hi,
    We are in the midst of testing the ITS 6.20 patch 18 with EP6 SP12 and we have run into some problems that were not evident with 6.10. 
    First.  With IAC PP_MY_REQUIREMENTS (Requirements Profile) and PP_MY_PROFILEMATCHUP (Profile Matchup), there is now a visible horizontal bar that goes across the whole window.  It can be moved up and down.  This is not there in 6.10.
    Second.  With the new PZ31_EWT (Edit Qualifications) transaction, when you select a qualification on the left and it then appears on the right, the dropdown for the ALV grid does not stay droped down when clicked.  You have to hold the mouse button, and then when you drag over top of the choice that you want, it doesn't select it, BUT, if you use your arrow keys on the keyboard, it changes the value.
    Third.  With PV8I (Internal Training), when viewing the Booking Information in the bottom of the screen, the top line/header of the window is only 1/8 visible.
    Has anyone run into any of these problems before?  Does patch 19 or 20 (when it comes out) solve any of these problems?
    Sorry for all the ranting!!
    Cheers,
    Kevin

    May be try this in ITS forum for a better response.
    Internet Transaction Server (ITS)
    Regards
    Raja

  • Latency patches and cdrw multisession problem

    Hi, I had this problem with tv card Pinnacle and cdrw on MSI KT7 pro 2a. Whenever I started using tv card computer frezzes. I found that if I disable cd and cdrw everything works fine. Later I installed latency patches and with IDETool managed to set cdrw from Multiword to Ultra DMA and everything seems fine but I found that my cdrw isn't working in multissesion mode anymore, I couldn't choose last session to continue. I had some advices with aspi layer but not sure about it and where to get it. Thek you for all help

    I've a Pinnacle  PCTV PCI card and had similar problems. When I tried to use it,  it worked fine only once. The second time W2K crashed and in some cases I had a memory dump, while in other cases, just a few, some files were also corrupted.
    I think it was an interrupt conflict problem as the Pinnacle card doesn't like to share its interrupt with other devices and if it does, because of APIC, not all the interrupts are equal.
    What I did, aftyer a crash that corrupted the file system,  was to remove all serial ports and the parallel port in the BIOS, thus releasing 3 interrupts.
    I had to install W2K again and, this time, the Pinnacle card got an interrupt that she liked. It is shared with another device that I do not use, a Firewire controller on the SB Audigy board. Previously, the interrupt was shared with the video card and with the RAID controller.
    Now it works fine.
    Good luck
    Ciao
    KT3 Ultra ARU
    ATHLON XP 2100+
    2 x 256MB PC3000 Corsair XSM Modules CAS=2
    SB Audigy Gamer
    VisionTek GF4 Ti4400
    Pinnacle PCTV PCI
    3COM NIC
    1 x Maxtor D740X 60GB IDE1 Master - W2K
    1 x Maxtor D740X 60GB IDE1 Slave - Linux-Mandrake 8.2
    1 x HP9100 CD Writer IDE 2 Master
    1 x Toshiba DVD SD - M1612 IDE 2 Slave
    2 x Maxtor D740X 60GB in RAID 0 configuration  - W2K (2nd instal.)
    Enermax 465W

  • ISE 1.2 Patch 7 ERS API problem updating some endpoints with a new group

    Hi,
    I have a php library that i have implemented most of the ers api functions with curl requests, and it works fine, i can get all endpoints, search for a specific endpoint, delete endpoints and to some degree i can modify endpoints, but not all endpoints it seems. For some reason when i use my function on some endpoints, the static endpoint group assigment does not get updated, and the response from the ers api is just empty, whereas when it goes good, i get a list of the attributes that were updated.
    Is there some specific requirements for which information has to be sent using the update_endpoint function in the ers api ? The examples have all information in every request, however what is actually needed in the request?
    Jan

    Have now tested by sending all parameters, even though i only want to change group or description, and it works.

  • Information: Patches that can Cause problem while Upgrading 10.2.0.4

    Hi ALL
    The Upgrade checklist and know issue for 10.2.0.4 is now available on Web iv .
    Note 464674.1 - Checklist for EM 10g Grid Control 10.2.x to 10.2.0.4 OMS and Repository Upgrades.
    This article is a quick checklist to follow when upgrading EM 10g 10.2.x to EM 10gR4 (10.2.0.4) and to report any Known Issues during Oracle Grid Control 10.2.0.4 Upgrade.
    Please email me your suggestions/comments to improve it. Going forward this note would be updated as and when more information get in. In case you wish to get something added then please send me the details.
    Regards
    Akanksha

    Hello Akanksha
    Thank you for your note.
    Unfortunately, it is rather confusing.
    You are telling 10.2.0.4 is not supported as a DB for the OMS repository
    And then, you describe the procedure to upgrade to this version.
    I have a Cst who followed the Release Notes and upgraded its repository to 10.2.0.4.
    Now, he can read that it is not supported. He just apply an Oracle doc and now he is no longer supported. That is quite amazing, isn't it ?
    What should he do then ?
    - Wait for 10.2.0.4 to be supported (as a terminal release, it is rather surprising it cannot be supported) ?
    - Downgrade to 10.2.0.3 ?
    Would you have some ideas or informations regarding the reasons of this no-support ?
    Best regards
    Gilles

  • Problems with flash update patch

    We are running into a problem with the flash update and a few others.
    Following best practices we have a group policy(Software Restriction
    Policies) that prevents executables from running in the temp directory and a
    few other typical spyware/Trojan start points such as %LocalAppData%. As an
    example patch management extracts the flash update to
    C:\Users\DAU*****\AppData\Local\Temp and then tries to run
    Patch-Smart.AdobeFlashPlayerPlugin.exe which doesn't happen due to the group
    policy. Is there any way I can redirect the patch extractions to a certain
    path in ZCM and then I could exclude the path from the policy. I know I can
    exclude the exe in group policy but I would have to do that for each patch
    that has a problem.
    Thanks,
    Jim Koerner

    What is your operating system & version?
    What is your web browser?
    [topic moved to Flash Player forum]

  • Problems with IE11 on W8.1 pro - after recent patch?

    Couple of problems have appeared recently with IE11 on Windows 8.1 Pro - everything was fine, but I am assuming a recent patch has caused the problem.  Problems are not seen on IE11 on Windows 7 Pro or on other browsers.  I'm running on auto-update,
    so should have the latest software versions.
    1) Extra white space is inserted before a table.  It happens on multiple web sites.  Length of the space varies and could make you think the page has failed.  It appears to be consistent for a page but I see no pattern between
    pages.  
    2) Multi level Menus implemented through CSS with drop downs to the side are suddenly inordinately sensitive when moving into the drop down making the menu almost useless. 
    Alex

    Couple of problems have appeared recently with IE11 on Windows 8.1 Pro - everything was fine, but I am assuming a recent patch has caused the problem.  Problems are not seen on IE11 on Windows 7 Pro or on other browsers.  I'm running on auto-update,
    so should have the latest software versions.
    1) Extra white space is inserted before a table.  It happens on multiple web sites.  Length of the space varies and could make you think the page has failed.  It appears to be consistent for a page but I see no pattern between
    pages.  
    2) Multi level Menus implemented through CSS with drop downs to the side are suddenly inordinately sensitive when moving into the drop down making the menu almost useless. 
    Alex
    Do you have any sample for us to reproduce this issue? We are glad test this issue on my side. If this issue really cause by recent patch, you can submit it to IE connect
    https://connect.microsoft.com/ie/.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • MSI K7N2 Delta-ILSR, Mouse problem & Video off problem solved!!!

    I find the following information that I collected very interesting at the very least...
    Here goes...
    The video off problem that I was having was directly linked to the mouse. Here, let me explain the video off problem. In the BIOS Have the Standby mode set to S3. The problem occurred when I started windows, then went into standby, then started back up, then restarted the computer, the monitor would act as if it were in sleep mode, or rather there was no signal being sent to the monitor. Well the odd way I fixed that is by plugging in a standard 2 button PS/2 mouse. Also this fixed the issue with the mouse sometimes not working in windows.
    Here is how I tested.
    Logitech MX700 Cordless Optical Mouse, PS/2 & USB= failed.
    Logitech iFeel Optical Mouse, USB= failed.
    Microsoft Cordless Ball Mouse, PS/2= failed.
    Standard Artec (Cheapy brand) Ball Mouse (With no wheel), PS/2= All issues fixed, and passed.
    When I said failed I do not mean they didn't work, I mean they sometimes didn't work and also caused the Video off problem after restarting the computer.
    Obviously it isn't the ports (PS/2 or USB) that are the problem, it is more like the mouse itself, and the amount of buttons in particular. As you can see above the only mouse that works correctly is the one that only has 2 buttons, the rest has 3 or more buttons along with a Wheel. The MX700 has 8 buttons + wheel, WOW!
    Anyways I figure out it was the mouse, and not the memory.
    Obviously MSI needs to make a patch for this mouse problem.
    I'm still having a hard time believing that the mouse caused the video not to work, but it is true! I spend well over 5 hours testing this crap. Every time with the mice with more then 3 buttons it messed up, and every time with the 2 button old fashion mouse it worked flawlessly!
    MSI, get to work on a new BIOS to fix this mess!!!  :]
    BioHaz

    Quote
    Originally posted by Raven_
    hi
    its possible to use an ps/2 mouse AND a usb mouse at the same time.
    i used the ps/2 mouse in windows and the usb mouse when playing games.
    you can get some trouble if you do it the way i did it.
    i was in windows surfing and the pointer just jumped all over the screen.
    when i looked on the other side under a table a friends little kid played with the usn mouse.  )
    bye
    LOL, that isn't what I'm talking about.
    There seems to be a problem with my motherboard accepting mice with more then 2 buttons. It works the first time, but if you restart the computer, the video goes off. If you have both installed, it still messed up.
    BioHaz

  • Java API, problem with secondary keys using multi key creator

    Hi,
    I'm developing an application that inserts a few 100k or so records into a Queue DB, then access them using one of four Hash SecondaryDatabases. Three of these secondary dbs use a SecondaryMultiKeyCreator to generate the keys, and one uses a SecondaryKeyCreator. As a test, I'm trying to iterate through each secondary key. When trying to iterate through the keys of any of the secondary databases that use a SecondaryMultiKeyCreator, I have problems. I'm attempting to iterate through the keys by:
    1: creating a StoredMap of the SecondaryDatabase
    2: getting a StoredKeySet from said map
    3: getting a StoredIterator on said StoredKeySet
    4: iterate
    The first call to StoredIterator.next() fails at my key binding (TupleBinding) because it is only receiving 2 bytes of data for the key, when it should be getting more, so an Exception is thrown. I suspected a problem with my SecondaryMultiKeyCreator, so I added some debug code to check the size of the DatabaseEntries it creates immediately before adding them to the results key Set. It checks out right. I also checked my key binding like so:
    1: use binding to convert the key object to a DatabaseEntry
    2: use binding to convert the created DatabaseEntry back to a key object
    3: check to see if the old object contains the same data as the new one
    Everything checked out ok.
    What it boils down to is this: my key creator is adding DatabaseEntries of the correct size to the results set, but when the keys are being read back later on, my key binding is only receiving 2 bytes of data. For the one SecondaryDatabase that doesn't use a SecondaryMultiKeyCreator, but just a SecondaryKeyCreator, there are no issues and I am able to iterate through its secondary keys as expected.
    EDIT: New discovery: if I only add ONE DatabaseEntry to the results set in my SecondaryMultiKeyCreator, I am able to iterate through the keys as I would like to.
    Any ideas or suggestions?
    Thank you for your attention,
    -Justin
    Message was edited by:
    Steamroller

    Hi Justin,
    Sorry about the delayed response here. I have created a patch that resolves the problem.
    If you apply the patch to your 4.6.21 source tree, and then rebuild Berkeley DB, the improper behavior should be resolved.
    Regards,
    Alex
    diff -rc db/db_am.c db/db_am.c
    *** db/db_am.c     Thu Jun 14 04:21:30 2007
    --- db/db_am.c     Fri Jun 13 11:20:28 2008
    *** 331,338 ****
           F_SET(dbc, DBC_TRANSIENT);
    !      switch (flags) {
    !      case DB_APPEND:
                 * If there is an append callback, the value stored in
                 * data->data may be replaced and then freed.  To avoid
    --- 331,337 ----
           F_SET(dbc, DBC_TRANSIENT);
    !       if (flags == DB_APPEND && LIST_FIRST(&dbp->s_secondaries) == NULL) {
                 * If there is an append callback, the value stored in
                 * data->data may be replaced and then freed.  To avoid
    *** 367,388 ****
    -            * Secondary indices:  since we've returned zero from an append
    -            * function, we've just put a record, and done so outside
    -            * __dbc_put.  We know we're not a secondary-- the interface
    -            * prevents puts on them--but we may be a primary.  If so,
    -            * update our secondary indices appropriately.
    -            * If the application is managing this key's data, we need a
    -            * copy of it here.  It will be freed in __db_put_pp.
    -           DB_ASSERT(dbenv, !F_ISSET(dbp, DB_AM_SECONDARY));
    -           if (LIST_FIRST(&dbp->s_secondaries) != NULL &&
    -               (ret = __dbt_usercopy(dbenv, key)) == 0)
    -                ret = __db_append_primary(dbc, key, &tdata);
                 * The append callback, if one exists, may have allocated
                 * a new tdata.data buffer.  If so, free it.
    --- 366,371 ----
    *** 390,401 ****
                /* No need for a cursor put;  we're done. */
                goto done;
    !      default:
    !           /* Fall through to normal cursor put. */
    !           break;
    !      if (ret == 0)
                ret = __dbc_put(dbc,
                    key, data, flags == 0 ? DB_KEYLAST : flags);
    --- 373,379 ----
                /* No need for a cursor put;  we're done. */
                goto done;
    !      } else
                ret = __dbc_put(dbc,
                    key, data, flags == 0 ? DB_KEYLAST : flags);
    diff -rc db/db_cam.c db/db_cam.c
    *** db/db_cam.c     Tue Jun  5 21:46:24 2007
    --- db/db_cam.c     Thu Jun 12 16:41:29 2008
    *** 899,905 ****
           DB_ENV *dbenv;
           DB dbp, sdbp;
           DBC dbc_n, oldopd, opd, sdbc, *pdbc;
    !      DBT olddata, oldpkey, newdata, pkey, temppkey, tempskey;
           DBT all_skeys, skeyp, *tskeyp;
           db_pgno_t pgno;
           int cmp, have_oldrec, ispartial, nodel, re_pad, ret, s_count, t_ret;
    --- 899,905 ----
           DB_ENV *dbenv;
           DB dbp, sdbp;
           DBC dbc_n, oldopd, opd, sdbc, *pdbc;
    !      DBT olddata, oldpkey, newdata, pkey, temppkey, tempskey, tdata;
           DBT all_skeys, skeyp, *tskeyp;
           db_pgno_t pgno;
           int cmp, have_oldrec, ispartial, nodel, re_pad, ret, s_count, t_ret;
    *** 1019,1026 ****
            * should have been caught by the checking routine, but
            * add a sprinkling of paranoia.
    !      DB_ASSERT(dbenv, flags == DB_CURRENT || flags == DB_KEYFIRST ||
    !            flags == DB_KEYLAST || flags == DB_NOOVERWRITE);
            * We'll want to use DB_RMW in a few places, but it's only legal
    --- 1019,1027 ----
            * should have been caught by the checking routine, but
            * add a sprinkling of paranoia.
    !       DB_ASSERT(dbenv, flags == DB_APPEND || flags == DB_CURRENT ||
    !             flags == DB_KEYFIRST || flags == DB_KEYLAST ||
    !             flags == DB_NOOVERWRITE);
            * We'll want to use DB_RMW in a few places, but it's only legal
    *** 1048,1053 ****
    --- 1049,1107 ----
                     goto err;
                have_oldrec = 1; /* We've looked for the old record. */
    +      } else if (flags == DB_APPEND) {
    +           /*
    +            * With DB_APPEND, we need to do the insert to populate the
    +            * key value. So we swap the 'normal' order of updating
    +            * secondary / verifying foreign databases and inserting.
    +            *
    +            * If there is an append callback, the value stored in
    +            * data->data may be replaced and then freed.  To avoid
    +            * passing a freed pointer back to the user, just operate
    +            * on a copy of the data DBT.
    +            */
    +           tdata = *data;
    +           /*
    +            * If this cursor is going to be closed immediately, we don't
    +            * need to take precautions to clean it up on error.
    +            */
    +           if (F_ISSET(dbc_arg, DBC_TRANSIENT))
    +                dbc_n = dbc_arg;
    +           else if ((ret = __dbc_idup(dbc_arg, &dbc_n, 0)) != 0)
    +                goto err;
    +
    +           pgno = PGNO_INVALID;
    +
    +           /*
    +            * Append isn't a normal put operation;  call the appropriate
    +            * access method's append function.
    +            */
    +           switch (dbp->type) {
    +           case DB_QUEUE:
    +                if ((ret = __qam_append(dbc_n, key, &tdata)) != 0)
    +                     goto err;
    +                break;
    +           case DB_RECNO:
    +                if ((ret = __ram_append(dbc_n, key, &tdata)) != 0)
    +                     goto err;
    +                break;
    +           default:
    +                /* The interface should prevent this. */
    +                DB_ASSERT(dbenv,
    +                    dbp->type == DB_QUEUE || dbp->type == DB_RECNO);
    +
    +                ret = __db_ferr(dbenv, "DBC->put", 0);
    +                goto err;
    +           }
    +           /*
    +            * The append callback, if one exists, may have allocated
    +            * a new tdata.data buffer.  If so, free it.
    +            */
    +           FREE_IF_NEEDED(dbenv, &tdata);
    +           pkey.data = key->data;
    +           pkey.size = key->size;
    +           /* An append cannot be replacing an existing item. */
    +           nodel = 1;
           } else {
                /* Set pkey so we can use &pkey everywhere instead of key.  */
                pkey.data = key->data;
    *** 1400,1405 ****
    --- 1454,1465 ----
      skip_s_update:
    +       * If this is an append operation, the insert was done prior to the
    +       * secondary updates, so we are finished.
    +       */
    +      if (flags == DB_APPEND)
    +           goto done;
    +      /*
            * If we have an off-page duplicates cursor, and the operation applies
            * to it, perform the operation.  Duplicate the cursor and call the
            * underlying function.

  • Patches difference in development, quality & production

    Hi,
    Our Development & Quality environment is on patchlevel
    SAP_ABA 700 0018
    SAP_BASIS 700 0018
    PI_BASIS 2005_1_700 0018
    SAP_BW 700 0020
    Our Production server is on
    SAP_ABA 700 0019
    SAP_BASIS 700 0019
    PI_BASIS 2005_1_700 0019
    SAP_BW 700 0021
    Golive is next week. already developments and configuration are moved to quality and testing is going on.
    Now i want to upgrade the patches in dev & quality to production level.
    After that only i ll move the transports to production.
    Please suggest us whether any problems will come in developments & configurations when the transports are moved to production.
    Regards,
    Raj

    It's difficult to commnet on.
    Best is building a Sandbox by copying production system , moving all those transports there and test. Then if everything is fine, upgrade quality and devlopment.
    But in any case , do you want to downgrade production patch level if any problem occurs after moving the transports to PRD?
    If the answer is NO, then you can upgrade quality first and test new patch level. If you find any problem try to solve that ( may be by applying some notes or rasing a message with SAP)
    I can make sure at least PI_BASIS 2005_1_700 0018 upgrade will not pose any problem.
    Regards
    Anindya

  • Problems with Hotspot after upgrading to OS 10.3.1.1565

    SInce i have upgraded the OS to the lastest version on my Q10, the Hotspot has stopped working. Previously it was was working absolutely perfectly. I have checked other support forums and a lot of users are facing the same problem after upgrading to OS10.3.
    I would like to know how soon a patch to fix this problem will be made available by Blackberyy.

    Known issue. No ETA on a resolution yet, unfortunately.
    http://www.blackberry.com/btsc/KB36801
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Problem using file based JNDI with JMS Bridge, WL 6.1sp3

              I am trying to connect an MQ queue to a Weblogic JMS queue using the JMS bridge,
              WLS6.1sp3. I have the CR081404_61sp3.jar and CR081511_61sp3.jar patches.
              I am having trouble getting the bridge to look up the MQ queue in the file based
              JNDI. According to the log it is trying to use a weblogic.jndi.WLInitialContextFactory
              instead of a com.sun.jndi.fscontext.RefFSContextFactory, which is what it is configured
              to use. I am getting the following error:
              <Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
              Bridge" is getting the connections to the two adapters.>
              <Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
              RUNTIME! Bridge Provd Messaging Bridge In getConnections: isStopped = false>
              <Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
              RUNTIME! Bridge Provd Messaging Bridge Getting source connection: sourceConnSpec
              = weblogic.jms.adapter.JMSConnectionSpec@27166f>
              <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
              <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
              Principal for Container Managed Security Context.>
              <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
              <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
              Principal for Container Managed Security Context.>
              <Sep 29, 2002 12:16:22 PM EDT> <Warning> <Connector> << Weblogic Messaging Bridge
              Adapter (XA) > ResourceAllocationException of javax.resource.ResourceException:
              ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
              url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest on createManagedConnection.>
              <Sep 29, 2002 12:16:22 PM EDT> <Error> <Connector> <Error granting connection
              request.>
              <Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
              Bridge" failed to connect to the source destination and will try again in 25 seconds.
              (javax.resource.spi.ResourceAllocationException: CreateManagedConnection Error:
              ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
              url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest)>
              <
              The configuration of the bridge, printed out in the log, is:
              <Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
              STARTUP! Bridge Provd Messaging Bridge's source properties are:
              AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
              Classpath=null
              ConnectionFactoryJNDIName = PMS.mqQcf
              ConnectionURL = file:/opt/mqm/java/mq-jndi
              InitialConnectionFactory = com.sun.jndi.fscontext.RefFSContextFactory
              DestinationType = Queue
              DestinationJNDIName = PMS.mqProvdRequest>
              <Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
              STARTUP! Bridge Provd Messaging Bridge's target properties are:
              AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
              Classpath=null
              DestinationType = Queue>
              Am I correct in assuming it should be using the fscontext connection factory?
              Why is it using the weblogic one?
              Jason
              

    CR081511_61sp3.jar patch should fix the problem. Make sure that the
              jar file is picked up. It should be put before other weblogic jar files.
              You should be able to tell if it is picked up by looking at the first
              couple of lines of your server log file.
              Dongbo
              Jason Kriese wrote:
              >
              > I am trying to connect an MQ queue to a Weblogic JMS queue using the JMS bridge,
              > WLS6.1sp3. I have the CR081404_61sp3.jar and CR081511_61sp3.jar patches.
              >
              > I am having trouble getting the bridge to look up the MQ queue in the file based
              > JNDI. According to the log it is trying to use a weblogic.jndi.WLInitialContextFactory
              > instead of a com.sun.jndi.fscontext.RefFSContextFactory, which is what it is configured
              > to use. I am getting the following error:
              >
              > <Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
              > Bridge" is getting the connections to the two adapters.>
              > <Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
              > RUNTIME! Bridge Provd Messaging Bridge In getConnections: isStopped = false>
              > <Sep 29, 2002 12:16:22 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
              > RUNTIME! Bridge Provd Messaging Bridge Getting source connection: sourceConnSpec
              > = weblogic.jms.adapter.JMSConnectionSpec@27166f>
              > <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
              >
              > <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
              > Principal for Container Managed Security Context.>
              > <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to locate context: java:/comp/env/wls-connector-resref>
              >
              > <Sep 29, 2002 12:16:22 PM EDT> <Info> <Connector> <Unable to determine Resource
              > Principal for Container Managed Security Context.>
              > <Sep 29, 2002 12:16:22 PM EDT> <Warning> <Connector> << Weblogic Messaging Bridge
              > Adapter (XA) > ResourceAllocationException of javax.resource.ResourceException:
              > ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
              > url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest on createManagedConnection.>
              >
              > <Sep 29, 2002 12:16:22 PM EDT> <Error> <Connector> <Error granting connection
              > request.>
              > <Sep 29, 2002 12:16:22 PM EDT> <Info> <MessagingBridge> <Bridge "Provd Messaging
              > Bridge" failed to connect to the source destination and will try again in 25 seconds.
              > (javax.resource.spi.ResourceAllocationException: CreateManagedConnection Error:
              > ConnectionFactory: failed to get initial context (InitialContextFactory =weblogic.jndi.WLInitialContextFactory,
              > url = file:/opt/mqm/java/mq-jndi, user name = guest, password = guest)>
              > <
              >
              > The configuration of the bridge, printed out in the log, is:
              >
              > <Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
              > STARTUP! Bridge Provd Messaging Bridge's source properties are:
              > AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
              > Classpath=null
              > ConnectionFactoryJNDIName = PMS.mqQcf
              > ConnectionURL = file:/opt/mqm/java/mq-jndi
              > InitialConnectionFactory = com.sun.jndi.fscontext.RefFSContextFactory
              > DestinationType = Queue
              > DestinationJNDIName = PMS.mqProvdRequest>
              > <Sep 29, 2002 12:16:00 PM EDT> <Debug> <MessagingBridge> <Messaging Bridge Debugging
              > STARTUP! Bridge Provd Messaging Bridge's target properties are:
              > AdapterJNDIName=eis.jms.WLSConnectionFactoryJNDIXA
              > Classpath=null
              > DestinationType = Queue>
              >
              > Am I correct in assuming it should be using the fscontext connection factory?
              > Why is it using the weblogic one?
              >
              > Jason
              

Maybe you are looking for

  • PI 7.11 sp6 system copy causes target sys to register with source

    Experts, We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g. I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT). I used the most recenty PI system copy guide that is specific for PI 7

  • How to generate a XML file from a XML schema...?

    Hi guys...! I have a XML schema and I want to write a XML file based on that schema. I have heard about this feature that eclipse has, which given a XML schema, can generate a XML file for you. Does anyone of you know about this feature? or is there

  • Connection issue while installing.

    I have installed Oracle 11g on my machine. No startup database is created at that time. Now I am creating database by Create Database command. After that I m executing following scripts: SET TERMOUT ON spool ./initdb.log SET TERMOUT OFF START &&1/rdb

  • Bad performance on global race-nokia 5800

    Ive updated my flashlite, and all, but the performance of global race game on my nokia 5800 (just bought a few days ago) is quite bad(framerate wise) compared to my cousins' 5800. what could be the problem?

  • How to transfer images from my iPad air  to my mac?

    How to transfer images from my iPad air  to my mac? If I use iphoto software, I can't see the ipad air on the browser...