Patch 10.2.0.1 - 10.2.0.2 on Windows

Hi there,
i try to upgrade an empty 10.2.0.1 (Windows XP 32bit, VMware Server 1.03, Enterprise Edition) to 10.2.0.1. First everything works fine. But when i run catupgrd.sql i find the folowing lines in my Logfile (near the end).
Does anybody know what does this mean? Neither in metalink nor here i found somebody who has the same problem.
Anybody Ideas?
Greetings and Thanks
Torsten
###CUT###
BEGIN cwm2_olap_metadata_refresh.mr_refresh; END;
FEHLER in Zeile 1:
ORA-00600: Interner Fehlercode, Argumente: [qkacon:FJswrwo], [1], [], [], [],
ORA-06512: in "OLAPSYS.CWM2_OLAP_METADATA_REFRESH", Zeile 1859
ORA-06512: in Zeile 1
####cut###

If you not found any thing on metalink , I doubt you find same any where else.
Open a tar/SR on metalink, I think that is only option.
Virag

Similar Messages

  • Latest windows 7 patches and firefoz 18 - firefox not working properly - shows stacked windows and does nothing

    Jan 10 windows 7 patches, plus new firefox update today. Now firefox starts up and shows multiple, stacked window frames and "firefox not responding" messages on top border. after multiple firefox screen flashes (minutes of time), firefox may eventually display normal windows/frames. Selecting new site, firefox goes through same activities. Startup site is www.baynews9.com, then try going to www.cnn.com

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Patch set number for upgrade to 10.2.0.3 Windows 64bit (not itanium)

    Hi,
    i installed 10.2.0.1 64bit on a dell Poweredge 2900 Windows server 2003, 64bit. it went ok.
    then i attempted to upgrade to 10.2.0.3 using patch 5337014.
    i got the following error :
    The image file D:\installers\p5337014_10203_WINNT64\Disk1\setup.exe is valid, but is for a machine type other than the current machine.
    reading the patch note it seems this patch is for itanium. Our server is not itanium.
    Can you please direct me to the correct patch number? i searched metalink over and over but don't find it. it's quite urgent.
    cheers,
    Andreas

    Choose as platform Windows Server 2003 (AMD64/EM64T), that's the correct patch.
    Werner

  • Are there any update or patches for Firefox 4. It works very poorly with Windowa 7 and not at all with Youtube?

    It freezes up all the time..."Firefox not responding". Also it will mot allow me to share YouTube videos and Facebook. i have none of these problems with IE or the old Firefox 3.

    An update was released today. Give it a spin and see whether it helps! (Currently, I believe you would have to download the full install, but hopefully the update button will start working in a few hours.)
    For what it's worth, I haven't noticed any problems running Firefox 4 on Windows 7, but I have not tried posting anything to YouTube or Facebook.

  • Error while applying patch no 9239089

    Hello,
    We are applying patch no 9239089 to EBS version 12.1.1 on WIndows 2003 R2 environment.
    While applying the patch on the application user we are getting the following error (adrelink.log)
    Starting link of product 'ad' on Wed May 22 16:23:16 IST 2013
    Current product is ad
    Current product TOP is  $ADTOP
    Current prodarea is D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0
    Relinking module 'adadmin.exe' in product ad ...
    gnumake -f D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_6832.mk
    D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.exe
    Starting link of ad executable 'adadmin.exe' on Wed May 22 16:23:17 IST 2013
    Done with link of ad executable 'adadmin.exe' on Wed May 22 16:23:17 IST 2013
    Relink of module "adadmin.exe" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure. Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    What is causing this problem?
    I ran: gnumake -f D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_6832.mk
    D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.exe
    and got the error:
    This application has failed to start because libintl-8.ddl was not found. Re-instaaling the application may fix the problem.
    Regards
    Prasad

    Hello,
    The following is the error that I am getting while running adpatch on pacth number 9239089:
    Relinking module 'adadmin.exe' in product ad ...
    gnumake -f D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_2112.mk
    D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.exe
    Starting link of ad executable 'adadmin.exe' on Fri May 24 12:59:01 IST 2013
    link.exe -MAP:D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadminnew.map
    -NODEFAULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup
    -OUT:D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadmin.new \
    D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/lib/adadmin.obj \
         D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/lib/adst.lib
    D:/oracle/VIS1/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib
    D:/oracle/VIS1/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib
    D:/oracle/VIS1/apps/tech_st/10.1.2/precomp/lib/msvc/orasqx10.lib
    D:/oracle/VIS1/apps/tech_st/10.1.2/RDBMS/lib/oraclient10.lib
    D:/oracle/VIS1/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
    D:/oracle/VIS1/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib
    D:/oracle/VIS1/apps/tech_st/10.1.2/NETWORK/lib/oran10.lib
    D:/oracle/VIS1/apps/tech_st/10.1.2/NETWORK/lib/oranl10.lib
    D:/oracle/VIS1/apps/tech_st/10.1.2/lib/oranls10.lib
    D:/oracle/VIS1/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB
    /LIB/OLDNAMES.LIB "LIB"/KERNEL32.LIB "LIB"/USER32.LIB "LIB"/ADVAPI32.LIB
    "LIB"/WINSPOOL.LIB "LIB"/COMDLG32.LIB "LIB"/GDI32.LIB "LIB"/VERSION.LIB
    LINK : warning LNK4044: unrecognized option '/LIB/MSVCRT.LIB'; ignored
    LINK : warning LNK4044: unrecognized option '/LIB/OLDNAMES.LIB'; ignored
    LINK : fatal error LNK1181: cannot open input file 'LIB/KERNEL32.LIB'
    D:/oracle/VIS1/apps/apps_st/appl/admin/VIS1/out/link_ad_2112.mk:804: recipe
    for target 'D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadminnew.exe'
    failed
    gnumake: *** [D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin/adadminnew.exe]
    Error 157
    Done with link of ad executable 'adadmin.exe' on Fri May 24 12:59:02 IST 2013
    Relink of module "adadmin.exe" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure. Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory D:/oracle/VIS1/apps/apps_st/appl/ad/12.0.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    This is happening of linking of other files.
    Regards
    Prasad

  • Oracle 11.1.0.7.0 patch 5 for windows 2003 x64.. Please help.

    Hello All
    I have Oracle EE 11.1.0.7.0 running on Windows 2003 x64 server plus ASM, and I want to apply patch 5, so that it becomes 11.1.0.7.5.
    I came to know from Oracle Support Services, Windows patche comes as bundled patchset, but I am not sure which patch to apply, there are 38 of them. Is 11.1.0.7.5P the correct one?.
    Patchset Avaialble:
    11.1.0.7.0 Patch 38 (11.1.0.7.38P) 32-Bit Patch:11741169 64-Bit (x64) Patch:11741170
    11.1.0.7.0 Patch 37 (11.1.0.7.37P) 32-Bit Patch:10636464 64-Bit (x64) Patch:10636465
    11.1.0.7.0 Patch 36 (11.1.0.7.36P) 32-Bit Patch:10350787 64-Bit (x64) Patch:10350788
    11.1.0.7.0 Patch 35 (11.1.0.7.35P) 32-Bit Patch:10245099 64-Bit (x64) Patch:10245101
    11.1.0.7.0 Patch 34 (11.1.0.7.34P) 32-Bit Patch:10168052 64-Bit (x64) Patch:10168056
    11.1.0.7.0 Patch 33 (11.1.0.7.33P) 32-Bit Patch:9773817 64-Bit (x64) Patch:9773825
    11.1.0.7.0 Patch 32 (11.1.0.7.32P) 32-Bit Patch:9930894 64-Bit (x64) Patch:9930895
    11.1.0.7.0 Patch 31 (11.1.0.7.31P) 32-Bit Patch:9846179 64-Bit (x64) Patch:9846180
    11.1.0.7.0 Patch 30 (11.1.0.7.30P) 32-Bit Patch:9869911 64-Bit (x64) Patch:9869912
    11.1.0.7.0 Patch 29 (11.1.0.7.29P) 32-Bit Patch:9718019 64-Bit (x64) Patch:9718020
    11.1.0.7.0 Patch 28 (11.1.0.7.28P) 32-Bit Patch:9707661 64-Bit (x64) Patch:9707665
    11.1.0.7.0 Patch 27 (11.1.0.7.27P) 32-Bit Patch:9604444 64-Bit (x64) Patch:9604446
    11.1.0.7.0 Patch 26 (11.1.0.7.26P) 32-Bit Patch:9523179 64-Bit (x64) Patch:9523181
    11.1.0.7.0 Patch 25 (11.1.0.7.25P) 32-Bit Patch:9392331 64-Bit (x64) Patch:9392335
    11.1.0.7.0 Patch 24 (11.1.0.7.24P) 32-Bit Patch:9384493 64-Bit (x64) Patch:9384497
    11.1.0.7.0 Patch 23 (11.1.0.7.23P) 32-Bit Patch:9264211 64-Bit (x64) Patch:9264214
    11.1.0.7.0 Patch 22 (11.1.0.7.22P) 32-Bit Patch:9166858 64-Bit (x64) Patch:9166861
    11.1.0.7.0 Patch 21 (11.1.0.7.21P) 32-Bit Patch:9082702 64-Bit (x64) Patch:9082709
    11.1.0.7.0 Patch 20 (11.1.0.7.20P) 32-Bit Patch:9025140 64-Bit (x64) Patch:9025144
    11.1.0.7.0 Patch 19 (11.1.0.7.19P) 32-Bit Patch:8928976 64-Bit (x64) Patch:8928977
    11.1.0.7.0 Patch 18 (11.1.0.7.18P) 32-Bit Patch:8832980 64-Bit (x64) Patch:8832986
    11.1.0.7.0 Patch 17 (11.1.0.7.17P) 32-Bit Patch:8783655 64-Bit (x64) Patch:8783657
    11.1.0.7.0 Patch 16 (11.1.0.7.16P) 32-Bit Patch:8689191 64-Bit (x64) Patch:8689199
    11.1.0.7.0 Patch 15 (11.1.0.7.15P) 32-Bit Patch:8655458 64-Bit (x64) Patch:8655460
    11.1.0.7.0 Patch 14 (11.1.0.7.14P) 32-Bit Patch:8603948 64-Bit (x64) Patch:8603952
    11.1.0.7.0 Patch 13 (11.1.0.7.13P) 32-Bit Patch:8553512 64-Bit (x64) Patch:8553515
    11.1.0.7.0 Patch 12 (11.1.0.7.12P) 32-Bit Patch:8508245 64-Bit (x64) Patch:8508247
    11.1.0.7.0 Patch 11 (11.1.0.7.11P) 32-Bit Patch:8451592 64-Bit (x64) Patch:8451598
    11.1.0.7.0 Patch 10 (11.1.0.7.10P) 32-Bit Patch:8416539 64-Bit (x64) Patch:8416540
    11.1.0.7.0 Patch 9 (11.1.0.7.9P) 32-Bit Patch:8343061 64-Bit (x64) Patch:8343070
    11.1.0.7.0 Patch 8 (11.1.0.7.8P) 32-Bit Patch:8297200 64-Bit (x64) Patch:8297201
    11.1.0.7.0 Patch 7 (11.1.0.7.7P) 32-Bit Patch:8260294 64-Bit (x64) Patch:8260301
    11.1.0.7.0 Patch 6 (11.1.0.7.6P) 32-Bit Patch:8219259 64-Bit (x64) Patch:8219268
    *11.1.0.7.0 Patch 5 (11.1.0.7.5P) 32-Bit Patch:7712568 64-Bit (x64) Patch:7712570*
    11.1.0.7.0 Patch 4 (11.1.0.7.4P) 32-Bit Patch:7682184 64-Bit (x64) Patch:7682189
    11.1.0.7.0 Patch 3 (11.1.0.7.3P) 32-Bit Patch:7664953 64-Bit (x64) Patch:7675231
    11.1.0.7.0 Patch 2 (11.1.0.7.2P) 32-Bit Patch:7586190 64-Bit (x64) Patch:7586195
    11.1.0.7.0 Patch 1 (11.1.0.7.1P) Only available in 32-Bit Patch:7540527
    Any help would be great.
    Regards
    Amit

    Hi All
    I have applied this patch 38 for Oracle 11.1.0.7.0 on Windows 2003 x64 bit server today but the database version from v$version didn't change at all and still its showing 11.1.0.7.0, I expected it to show 11.1.0.7.5.
    Any suggestions.
    Regards
    Amit

  • How to get FM10 patch to repair licensing to install in Windows 8.1

    I recently purchased a new computer with Windows 8.1. When I installed my FrameMaker 10 application on it, I anticipated it would display the "license has expired" error message, so I downloaded the patch. Unfortunately, the patch isn't updating FrameMaker as it did on my Windows 7 computer. What should I do to make it work in Windows 8.1? Thanks.
    Janet

    Never mind.... my brain is a bit fried from working with Windows 8 for the first time (plus three hours on the phone until the wee hours getting the run-around and never all answers from Microsoft help on another issue). Thanks!
    Janet

  • Patches not visible in SCCM 2007 Site server even after approving the patches in WSUS

    Hi,
    The patches are not appearing in SCCM 2007 site server after approving the same patches in WSUS.
    Below are the patches.
    MS14-080: Cumulative Security Update for Internet Explorer - Windows Server 2008 SP2 - IE 7 - KB3008923 [23,186.1]
    MS14-018: Cumulative Security Update for Internet Explorer - IE 11 - KB2929437 - Windows Server 2008 R2 SP1 (x64) [4,32.4]
    MS14-066: Vulnerability in Schannel Could Allow Remote Code Execution - Windows Server 2008 SP2 - KB2992611 (x64) - V2 [1,8.3]
    MS14-038: Vulnerability in Windows Journal Could Allow Remote Code Execution - Windows Server 2008 SP2 - KB2971850 [1,8.1]
    MS09-060: Vulnerabilities in Microsoft Active Template Library (ATL) ActiveX Controls for Microsoft Office Could Allow Remote Code Execution - Visio Viewer 2007 SP1/SP2 [1,8.1]
    MS12-001: Vulnerability in Windows Kernel Could Allow Security Feature Bypass - Windows Server 2008 R2 Gold (x64) [1,8.1]
    MS14-033: Vulnerability in Microsoft XML Core Services Could Allow Information Disclosure - Windows Server 2008 SP2 - KB2939576 [1,8.1]
    MS14-025: Vulnerability in Group Policy Preferences Could Allow Elevation of Privilege - Windows Server 2008 SP2 - KB2928120 (x64) [1,7.8]
    MS13-014: Vulnerability in NFS Server Could Allow Denial of Service - Windows Server 2008 R2 Gold/SP1 (x64) [1,7.7]
    I have approved the above patches in WSUS and ran syncronization. The log wsyncmgr.log show that synchronization is done and even all child sites are syncronized. But I am unable to find the above even in the parent site. Checked all the SUP settings and
    all the 2008 server updates are set and marked to download.
    Please help me out on fixing this.

    So you should NEVER approve anything in WSUS. This will cause problems with your clients. Honestly since you approved things in WSUS, I would uninstall WSUS and reinstall it, reinstall the SUP, this will clear up any issues that now exist.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • FM 8.0.4 patch for 8.0.2 versions released

    From FM product management:
    The EFG (English, French, German) Patch for users who are still on 8.0.2 (p273) is live now. This is also called 8.0.4 (p277) and is available through Adobe Updater as of now.
    These users will directly move from 8.0.2 -> 8.0.4
    Soon, well make the patches available on the web and would release patch for Japanese installation too.

    I can't get the Windows FM 5.0.4 update to install.
    My initial installation was 8.0.0, standalone version, and I've since installed the 8.01 and 8.02 updates in order, so I'm currently running using FM 8.0.2. My Help > About FrameMaker menu option confirms that my version is Version 8.0p273. When trying to install 8.0.4 it downloads the files and then gives me an error message:
    "You do not have correct version of FM install on your system. This patch installer will work only with Version 8 p273 build. Patch installer will quit now."
    Followed by another message:
    "Adobe FrameMaker 8.0.4 Update failed to install."
    I cant uninstall the updates either (with a view to re-installing them). When I try to remove 8.0.2 (8.0 p273) I get the same error message. I can't go forward, can't go back.

  • How to do in-place-upgrades with the new patch sets (11.2.0.2.0)?

    Hello,
    Oracle has released the new patch set 11.2.0.2.0 for Oracle Database whose installation deviates from the previous patch set instructions. Are there any new deployment procedures available to do an in-place upgrade? We have a lot (about 100) of development databases here, most of them do not have enough hard disk space to do an out-of-place upgrade, so the need for updated deployment procedures is definetely there.
    Best regards,
    Andreas

    Hello Hemss,
    I am trying to do an in-place-upgrade (replacing the old Oracle software completely because our test servers have only very little space). When you want to perform an out-of-place upgrade, things are more simple, but you need the disk space for a new Oracle home (about 6 GB on Linux-x64 in my case). Essentially, the steps are:
    1. You can keep the production database online during the next steps
    2. Install the new 11.2.0.2.0 into a new Oracle Home (an Oracle software directory which does not exist yet). Only install the software.
    3. Apply any post-11.2.0.2.0 patches if available and needed
    4. Schedule a maintenance window with your users
    5. Put the original database(s) in MOUNT mode (SHUTDOWN IMMEDIATE followed by STARTUP MOUNT)
    6. Perform a FULL backup of both database and old Oracle home, just to be on the safe side.
    7. Set your enviromnent: ORACLE_HOME and ORACLE_BASE should point to your NEW installation, ORACLE_SID to your production database.
    8. Start netca to create a new LISTENER for your new software installation (you might want to use a different port than your previous installation in case you need to run both at the same time)
    9. Start dbua from the new Oracle Home and follow the on-screen instructions. You can either create an updated copy of the database (needs more disk space but you can easily switch back to your orginal DB), or you change the database to fit your new Oracle version (needs less space, but you need to run the scripts to downgrade to the old release if you need to go back)
    So, as long as you have plenty of disk space, things are not that difficult at all. Of course, you should always read the release notes and the full installation guides for the new version because there might be new features or behaviours that affect your database. It is also highly advisable to test this on a completely different machine first.
    You can find the complete upgrade guide here: http://download.oracle.com/docs/cd/E11882_01/server.112/e17222/toc.htm
    Best regards,
    Andreas

  • Required patches not showing in SCCM report, its all ways showing need 0 patches.

    Hi,
    Can any only please help me on this issue.
    We have a critical server and it is added in SCCM phase for server patching.
    But now the issue is, In SCCM maintenace window report, its always showing need 0 patches and its no required patches displayed.
    No issue with WMI also, logs shows scan process completed successfully.
    If it is the issue with WSUS client agent, can any only please provide me the steps to rebuild WSUS client agent or please suggest me the solution for to fix this issue.
    Thanks in advance,
    Manivel M

    in addition to checking windowsudpate.log (usually found at c:\windows), you should also check the ConfigMgr client logs (usually found at c:\windows\ccm\logs, or, c:\windows\system32\ccm\logs)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • SCCM report says 17 patches are needed, but they are not needed

    Another weird one. I've had this before with just 1 patch needed but never figured it out. But now I have a Server 2012 box (SCCM 2012 R2 CU4) that report "Compliance 5 - Specific computer" says need 17 patches. Software Center on the box says
    none are needed. Patches are downloaded and installing on other computers. In Windows Update\View Update History, it says all 17 patches successfully installed ON THE SAME DAY. So I think something happened with the patch run on that day and Software Center
    and Update History say they finished but somewhere in the db it thinks they haven't. Cache purges, reboots, and running all actions on the actions tab haven't helped.
    Patches that have come up as needed after that day install and report as completed just fine.
    Any ideas?
    Ben JohnsonWY

    why that works: what can happen is that occasionally, somewhere between a client and the MP, the MP processing, and processing into the database, statemessages might become corrupt or somehow else 'lost'.  normally not a big deal; but for software updates
    to get a client to re-report "current" state of all software updates currently known about at the client, that little snippet needs to be re-run.
    In my environment about 2x a year I have all my clients re-submit their software updates state (enable a deployment for a while, then disable it).  I don't know how many clients "might be" in a misreporting state, but it gives me the warm
    fuzzy that I'm doing my best to reduce the possibility that computers might be listing they are missing an update, when they aren't.
    Standardize. Simplify. Automate.

  • Error by patching of SAP NetWeaver with Oracle on Windows

    Hi!
    I am about to patch my SAP system (SAP NetWeaver 04S) with Oracle on Windows.
    The following error occurs:
    Import phase 'CHECK_REQUIREMENTS' (05.02.2008, 16:00:39)
    Error during executing the tp command 'tp CONNECT B11   ...'
    tp return code: '0232' , tp message: 'connect failed' , tp output:
      This is tp version 340.16.38 (release 640, unicode enabled)
      ERROR: Connect to B11 failed (20080205160039, probably wrong environment).
      TRACE-INFO: 1: [dev trc ,00000] Tue Feb 05 16:00:39 2008 29426 0.029426
      TRACE-INFO: 2: [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 38 0.029464
      TRACE-INFO: 3: [dev trc ,00000] using "E:\usr\sap\B11\SYS\exe\run\dboraslib.dll" 35 0.029499
      TRACE-INFO: 4: [dbsloci. ,00000] *** ERROR => Cannot connect: dbs/ora/tnsname in Profile missing
      TRACE-INFO: 5:   738 0.030237
      tp returncode summary:
      TOOLS: Highest return code of single steps was: 0
      ERRORS: Highest tp internal error was: 0232
    standard output from tp and from tools called by tp:
    Can some one give some recommendations how to proceed?
    Is something wrong with oracle environment?
    Thank you very much!
    regards
    Thom

    Hi!
    Thank you!
    The problem is my <sapsid> user (B11adm) cannot log in into OS, but I can log in as an other <sid>user (E11adm) or as administrator.
    If I execute the command as other <sid>user (E11adm) >r3trans -d I retrieve:
    2EETW169 no connect possible: "DBMS = ORACLE
    --- ORACLE_SID = 'B11'"
    r3trans finished (0012).
    The result of commando  >set:
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\e11adm\Application Data
    CLIENTNAME=DZEM9001
    ClusterLog=C:\WINDOWS\Cluster\cluster.log
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=OLDA8005
    ComSpec=C:\WINDOWS\system32\cmd.exe
    dbms_type=ORA
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\e11adm
    JAVA_HOME=C:\j2sdk1.4.2_06
    LOGONSERVER=
    OLDA8001
    NUMBER_OF_PROCESSORS=2
    ORACLE_HOME=E:\oracle\B11920
    ORACLE_SID=B11
    OS=Windows_NT
    Path=C:\j2sdk1.4.2_06\bin;E:\usr\sap\B11\sys\exe\run;E:\oracle\B11920\jre\1.4.2\
    bin\client;E:\oracle\B11920\jre\1.4.2\bin;E:\oracle\B11920\bin;C:\Program Files\
    Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;E:\oracle\BWX920\bin;
    C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microso
    ft SQL Server\80\Tools\Binn\;E:\usr\sap\B11\SYS\exe\uc\NtI386
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 8 Stepping 6, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0806
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    RFCEXEC_SEC_FILE_PATH=E:\usr\sap\B11\SYS\exe\uc\NtI386
    SESSIONNAME=RDP-Tcp#22
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME1\e11adm\LOCALS1\Temp\1
    TMP=C:\DOCUME1\e11adm\LOCALS1\Temp\1
    USERDNSDOMAIN=PORTAL.LOCAL
    USERDOMAIN=PORTALGROUP
    The result of >tnsping B11
    TNS Ping Utility for 32-bit Windows: Version 9.2.0.5.0 - Production on 07-FEB-20
    08 10:34:15
    Copyright (c) 1997 Oracle Corporation.  All rights reserved.
    Used parameter files:
    E:\oracle\B11920\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (SDU = 32768) (ADDRESS_LIST = (ADDRESS = (C
    OMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = olda8005) (PORT = 1527))) (CONNEC
    T_DATA = (SID = B11) (GLOBAL_NAME = B11.WORLD)))
    OK (50 msec)
    USERNAME=e11adm
    USERPROFILE=C:\Documents and Settings\e11adm
    windir=C:\WINDOWS
    Is it possible to activate the right sidadm user (B11adm)?
    Thank you!
    regards
    Thom

  • Patching Acrobat X to 10.0.1 kills Hummingbird Exceed

    After patching Acrobat X Pro 10 to 10.0.1 on Windows XP SP3 my X-Server Exceed V14.0.2.429 from Open Text (formerly Hummingbird Exceed) refuses to start. I have tried this two times. Uninstalling Acrobat solves the problem.

    Disabling XInputExtension in Exceeds Xconfig->X Server Protocol->Extensions Tab
    eliminates this conflict too.
    Many thanks to Dave Pelletier from OpenText.

  • PATCH TUESDAY SEPT 10 WINDOWS UPDATE CRASHED MY SOFTWARE

    MY WORD, EXCEL DOCUMENTS ARE CORRUPT.
    SYSTEM RESTORES GOING BACK TO SEPT 4TH ARE NOT WORKING. I GET A MESSAGE SAYING THE RESTORE DID NOT WORK. WHEN I LOG BACK ONTO MY LAPTOP, I HAVE A WINDOW SAYING THE RESTORE WAS SUCCESSFUL AND ALL SEEMS TO WORK WELL.
    HOWEVER, WHEN I REBOOT, FILES ARE CORRUPT. I'VE NOTICED THAT DURING THE REBOOT, WINDOWS PERFORMS UPDATES.
    DON'T WANT TO ATTEMPT MANUFACTURER'S RESTORE AS I BELIEVE IT WILL ERASE ALL MY DATA.
    DID ANYONE HAVE THE SAME PROBLEM AND HOW DID YOU FIX IT?
    THINKING OF CONTACTING HP TO REINSTALL SOFTWARE. IF SOMEONE EXPERIENCED AND SUCCESSFULLY SOLVED THE PROBLEM, I WOULD LIKE TO HEAR FROM YOU. THANK YOU.

    Hi
    No Need to panic there some other users who are facing similar issues after doing the windows update.
    What you can do is turn of windows update for some time so that the update does not go through again and Microsoft will have a fix patch or update very soon. You can Turn On windows updates after a week or 15 days by that time Microsoft would have updated a patch on the update.
    http://windows.microsoft.com/en-in/windows/turn-automatic-updating-on-off#turn-automatic-updating-on...
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

Maybe you are looking for

  • Career Help Needed for me and my wife..your suggestion would surely help!

    Hi Guys, I would really appreciate if you can solve our mid career Dilemma. Me and my wife both want to get in to SAP..Kindly suggest which module should we pick.. My Wife's Profile: She is an Economics honors  graduate and an MBA too. she has got 7

  • AP Check

    Hi Guys, It's regarding AP Check which will be printing on pre-printed check. Script has only one page. In the main window multiple line items (Invoices) will print. If there are more line items it will overflow to the next page. Now issue is Client

  • Locking "Clea Form" with signatures

    I've created a fillable form and have inserted 3 sections. At the end of section one an employee is required to add their signature. In that signature box property I have set it so that once the signature is applied all form fields selected become re

  • Stop sign in the start process of process chain

    Hi Team, We are seeing a 'stop sign' in the Start process of a 'Process Chain'.  Normally there's a green tick. Any idea why ?  We did manually post a day's data. Thanks, R T

  • Just Ordered a Mac Pro & 24" LED Display

    Neither item states that it comes with a video cord to hook the two together. One of the options while configuring my Mac Pro was to get a video cable. Do I need to buy one? (Or does one come with either the display or MacPro) If I need to buy one, w