Patch 105591 not installing -11 ?

Hi -
I installed patch 105591 on my Sparc and it doesn't appear to have installed the 11 part which means that bug 4466915 is bothering me. As you can see from the readme that bug is included in 11.
(from 105591-11)
4423447 improvements in <string> implementation
4466915 istream::read() reads the first input character twice
After installing the patch 105591 - If I do the following, I get:
showrev -p | grep 105591
Patch: 105591-05 Obsoletes: 101242-13 Requires: Incompatibles: Packages: SUNWlibC
Patch: 105591-07 Obsoletes: 101242-13 Requires: Incompatibles: Packages: SUNWlibC
Patch: 105591-09 Obsoletes: 101242-13 Requires: Incompatibles: Packages: SUNWlibC
Patch: 105591-14 Obsoletes: 101242-13 Requires: 107733-09 Incompatibles: Packages: SUNWlibC
Patch: 105591-15 Obsoletes: 101242-13 Requires: 107733-09 Incompatibles: Packages: SUNWlibC
As you can see the patch -11 is not there.
Any ideas why or how I can make it install the -11??
Thanks in advance, Phil

The current version for this patch is -16. Would you like to try that?
Please search: sunsolve.sun.com
- Rose

Similar Messages

TS4209 Wi-Fi 1.0 patch will not install on a 10.7.4 Mac OSX even though the Wi-Fi loss bug is still there

Hello all,
The Wi-Fi 1.0 patch will not install on a 10.7.4 Mac OSX even though the Wi-Fi loss bug is still there, every now and then (the iMac does not detect any wi-fi network).
Are there any other solutions regarding this issue ?
kind regards

I figured out the problem.
This is going to sound a little crazy, but I've spent a lot of time on this one.
There's some kind of incompatibility with Lion and Seagate ST31000340AS drives. I was trying to install Lion on these drives and it would consistently fail. I've also tried to use these drives in a RAID volume. No go. I tried three different drives of this model. All of them failed.
I tried to install Lion on a Seagate ST31000528AS and it worked first time and sings beautifully.

Servers showing compliant even patches are not installed in the server

Hi
We are using SCVMM2012 and Patches are not getting downloaded on to the server even though in the report of complaince SCVMM2012 it says compliant, even patches are not instaled in the server.
What should i do for the same.
Thanks

Please post the output of:
dmesg -c
modprobe e1000e
dmesg

Patch showing not installed but it is on the server

I have KB2904266 deployed on all my servers. On my compliance reports it is showing its missing on 17 servers. This patch was release in December 2013 and I can see that it was installed on the servers in January 2014 which lines up to what I have deployed
in my Software Update Group's deployment. I see some posts about similar issues but no resolution.
Any ideas would be helpful.
Thanks,
Matt

The ConfigMgr SDK contains an example (vbs) to re-send all state messages to the server. This might help. Or examine WMI on the client (UpdatesStore) if the state is / is not "installed".
Torsten Meringer | http://www.mssccmfaq.de

Jboss patch is not installed properly

Hi all,
any could explain urgently when ever i try to update Jboss patcs it's not installed and at the same time software updates in eclipse help also not installed. it's showing some error like access denide url like http:\\eclipse.dowlode.org/webroot/updates. pls give ur passitive response.
thanks
venkat637

Hi,
Eclipse update software link is not existing now and you may get correct answer if post same queries in respective forums(Jboss & eclipse).
Jboss Community: http://community.jboss.org/
Eclipse Community: http://www.eclipse.org/forums/index.php
~ Raji
Edited by: Raji Reddy on Oct 19, 2011 11:22 PM

Servers where patches will not install automatically or manually, Live updates are broken and when checking installed updates shows "NO UPDATES ARE INSTALLED ON THIS COMPUTER" SFC \SCANNOW will not run

Hello, (Bit of a long one but please read)
We have 3 servers in same physical location and server OU etc that are exhibiting the exact same behaviors (we have server servers in this location that are not), as above theyt are all W2008 R2 SP1 and all built from the same standard
image we use on hundreds of other computers, they have also been in production for different amounts of time and we started to see this behavior at different times with them: (Its odd they are all in the same site where there are also several other servers
that are not effected, there must be a link ? )
These servers are all missing several patches when checking our internal tool that reports from IBM endpoint management that we use to deliver patches (they are not all missing the exact same patches some ore or less than other), although
SCCM (we used SCCM to deliver patches until around 6 months ago) and IBM EM are both running (some ptches hark back to the SCCM Delievry days) they are not patching and when attempting to patch manually by downloading the exact patch coresponding to the fixlet
ID and the KB , the stanbdalone installer starts and after some time you receive an error message “The update is not applicable to yoru computer”. Windows update returns error 80070006 for all of the servers.
it is worth noting that other applications and products also using the .MSU extension will insatll so it is not a problem with the installer service.
The above led me to think a corrupt patch may have stopped the sequence of patching so I then looked in “Programs and Features” => “Installed updates” and this is blank for all of them returening the message:
“NO UPDATES ARE INSTALLED ON THIS COMPUTER”. (this I believe is a part of the fundamental issues and resolving this may resolve the patching)
Another issue is that if you run “SFC /SCANNOW” It starts the scan and then returns: “Windows Resource Protection could not perform the requested operation” (Also in safe mode and both from an elevated CMD and WMI is started as a service)
The all three are probably related so I think fixing the “SFC and NO UPDATES SHOWN” issues will resolve the first.
The things I have tried so far are:
Running : wmic qfe list full /format:htable > c:\updates.htm Should produce a list of updates but instead returns : No Instance(s) Available (this is not hopeful)
Fix: Ran the “SYSTEM UPDATE REDINESS TOOL” from http://support.microsoft.com/kb/947821
Result : Update Ran successfully but NO CHANGE
Fix: Ran the automated and manual fix “RESET WINDOWS UPDATE COMPONENTS” here :
http://support.microsoft.com/kb/971058/en then undated windows update agent.
Result : All ran successfully and NO CHANGE
Fix: Ran MBSA
Result : Runs successfully and then stays at “Done downloading security update information” (Log gives no obvious information)
Fix: Renamed the software distribution folder/restarted services (Various variations of this fix online, tried a few)
Result: Runs as described in article with new Software distribution folder being created,
NO CHANGE
Fix: Create/Correct the reg key for windows trusted installer located here HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version (several articles relating to this and the above issues)
Result: the existing key was correct as should be from internal system information gathered , required in article.
Fix: Ran the “Windows update trouble-shooter”
as here :
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
Result: It detected and fixed error’s but still no change.
The WMI Repository checks out on them all for both of the methods I know to verify “Get-wmiobject –list |measure” and ensure count is over 900 and also “C:\>winmgmt /verifyrepository” and the repository came back as “WMI Repository is consistent”. I guess
this is not hard evidence the WMI is OK, but these are the only methods I know.
I have also tried removing the server from its OU , running a GP Update and then rebooting and testing but to no avail (Bit of a longshot but tried to link the distinction between the three servers and the OU GP is one of them)
I have tried a few other articles registering .Dll’s etc , but I did not take a note of links as I was at the start of this and didn’t expect it to go so long so please reply with anything you see not above im happy to try again.
I have thought about removing SP1 and reinstalling it but this will require a major downtime and only possible if the backup files of SP1 have not been removed.
Any help is apreciated !

Hi,
Please try to rebuil the WMI repository.
For detailed information, please refer to the blog below,
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
Best Regards.
Steven Lee
TechNet Community Support

Task Sequence not installing patches

Hi,
In order to automate the patching process for servers, I have a task sequence that runs at a specific time which triggers a wuauclt.exe scan to check for updates. I have a software update group created with the patches that we want to install. This time
around the patches were available in software center but were not installed. I just would like to clarify what I found as to what may be the reason for this. The task sequence that is deployed has an assignment schedule of 4/11/15 At 03:00 and will run for
a maximum of 120 minutes. Checking the software update group scheduling properties, the software available time is set to 4/11/15 At 12:00.
Would this be why the patches did not install because the software available time was after the task sequence was finished running?
TIA

Hi,
The Software update muse be available to install through a TS as well, that is what I have seen in the past as well.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

The upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program

trying to install an update patch for Citrix xendesktop 7.5 and the error when I click on the msi patch is "the upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch
may update a different version of the program"
The application was installed 2 days prior and works fine but the patch will not install.
Any ideas?
Wendy2014

Yes let's see if there is any error occurs in installation log.
Meanwhile from the error message, the possible cause is that a part of the application is missing such as a registry key with app version. In this situation you can first test to reinstall/repair the application though it is still working fine - see if issue
persists after reinstall the app.
Meanwhile you could also contact Citrix about this issue. It may be a common issue and Citrix may provide a quick fix for it.
If you have any feedback on our support, please send to [email protected]

SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try. All of those are Windows 7 PCs, incidentally. On Adobe patches,
one PC fails and the other 3 machines still sit in Unknown status. Certificates are distributed,
Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
Thanks,
Andy Maslin

An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
Jason | http://blog.configmgrftw.com

CSA 6.0 will not install. Crashes on Patch Information.

I have tried to install CSA 6.0 a few times and it crashes on "Unable to load patch information into database. setup will now abort". can anyone tell me why this keeps happening. I have installed 5.2 just fine but I want to use 6.

If you encounter problems with installing or uninstalling the CSA, perform the following tasks:
â¢ Verify that you rebooted the server.
â¢ Verify that the Cisco Security Agent service is not disabled and that its Startup Type value is
Automatic.
â¢ Obtain the installation logs from :\Program Files\Cisco\CSAgent\log. Review the
Cisco Security AgentInstallInfo.txt and driver_install.log files.
â¢ For installations, verify that you installed the Network Shim. The driver_install.log file should state
that csanet2k.inf installed. If the Network Shim is not installed, uninstall the Agent and then install
the Agent again.
â¢ Verify that you did not use Terminal Services.

Office 2013 patches not installing

I am trying to install some updates for office 2013 through Windows update and I keep on getting the error message 80070663 when installing these (8 so far). Other windows patches
install fine. I am running Windows 7 Pro in a Domain environment and am a domain admin running these with full admin privileges.
I have tried just about every fix suggested in every other post
- Rebuilding the Windows Update environment
- Running Sfc (no errors)
- Running the relevant Fixit's (no issues or repairs found)
- Running Chkdsk Scan (no errors)
- Downloading the patches and trying to run them manually (They error out with a applicability test error)
- Running Antimalware and similar scans (nothing)
- Running a repair on Office 2013 (errors out with a 5 error towards the end of the repair - faulting module msvcrt.dll fault offset 35e1
- Downloading and reinstalling the C++ library re-distributables (i.e. msvcrt.dll)
Not this is only on the Office patches and not any other patches which suggests an office problem rather than a Windows update issue.
Anyone got any thoughts - There was a suggestion that this might be caused by missing update packages...

Hi,
Apologize for the late reply.
Regarding Office issue, have you tried Repair Office programs from control panel?
Follow this guide:
Repair Office programs
Change recommended update and diagnostic settings
Further, since this is more related with Office, it is recommended to ask inthe office forum for a better assistance:
Microsoft Office IT Pro
http://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
Best regards
Michael Shao
TechNet Community Support

Error : Patch 9.4.2 not installed. when trying to install AcrobatPatchApplication.exe

All is in the titles.
I'm deploying Acrobat Reader and Pro on several thousand of machines, usually without big troubles.
last month I deployed the 9.4.2 update and everything went fine until we discovered the printing problem.
This month I'm trying to deploy the patch, but it seems to not work as expected.
When i run it on few machines with Adobe Acrobat 9.4.2 and Adobe reader 9.4.2 it returns to me the following message in the log file:
03/09/11 11:14:21   INFO              =~=~=~=~=~=~ Start : Acrobat Patching Application.. =~=~=~=~=~=~=~=~=~
03/09/11 11:14:21   INFO              Silent Mode : 1
03/09/11 11:14:21   INFO              Found product : {AC76BA86-1033-0000-7760-000000000004}, installed on the machine.
03/09/11 11:14:21   ERROR             Error : Patch 9.4.2 not installed. Acrobat 9.4.2 patch should be applied before running this executable.
03/09/11 11:14:21   INFO              =~=~=~=~=~=~ Logging finished... =~=~=~=~=~=~=~=~=~
For info : {AC76BA86-1033-0000-7760-000000000004} is the code for Adobe Acrobat Pro 9.4.2 in the registry key.
What's wrong??

Installation howto you can find on http://www.puschitz.com
Try use "Search" function before you create new topic. This one was discussed many times.

Recommended patch 120445-01 will not install with Sol. 9 (09/2005)

Patch 120445-01 will not apply to a Solaris 9 (09/2005) setup. The hardware is an Ultra-80. Although it is recommended, it fails with the "patchadd" message:
Checking installed patches...
One or more patch packages included in 120445-01 are not installed on this system.
The host was installed from scratch and the "smpatch" was run until it had no more patches to apply except this one.
For us, this patch is only an annoyance. When I cursorily read the description, I doubt that these features exists on this hardware.

I had to install the packages:
TSBWvplr.u
TSBWvplu.u
from the DVD media. I could not find these packages from the CD media that I used. I had to use another machine to extract the packages.
I saw another post where it mentioned that patch 120445-01 would not apply. I suspect that the package install of it already has this patch.

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed.

.RAF files not recognized in bridge but PS ok. Patch 7.1 installed. Anyone know the fix?

To me it seems related to your Adobe Camera Raw (ACR) converter. Clue inhere is you only miss the Raw files and have no problems in seeing other formats like jpeg and tiff.
The screenshot you delivered is from the wrong library, however, this same library (the one on system level) also is the location where you should be able to view the correct version of your ACR plugin. The path: library (same as per your screenshot)/Application support/ Adobe/ Plug ins/ CS6/ File Formats. inhere should be only one version of Camera Raw (called: "Camera Raw.plugin") and this should show version 8.3 (141).
I'm not sure about your bridge version number, Bridge 5 comes with PSCS6 but my most recent version of Bridge is 5.0.2.4.
Anyway, if you have only one ACR (8.3) installed in the above mentioned path then you might want to try to delete the Bridge plist file and Bridge cache file manually.
For this you have to Quit Bridge and find the user library (by default hidden, use menu Go in Finder and press option key to reveal).
Inhere find the plist file (user(your user name) / library / Preferences and inhere find and manually delete the file called: "com.adobe.bridge5.plist"
The in same user library find Bridge Cache. User/Library/Caches/Adobe/Bridge CS6. Inhere are 2 files, the adobe Bridge plug in cache and the folder called Cache. delete (or move outside libray) both items.
The restart Bridge (If needed also again hold option key to reset preferences) and this will create fresh files for the previous deleted items, leaving you with an almost out of the box factory set version of Bridge.

Photoshop Elements 8.01 Patch did not fully install

HI
I checked and it said 8.01 patch available. I selected to install it. It ran, then stopped. I closed PS and then reopened Photoshop and it still says 8.0 but now it does not say any updates are avaialbe. I think it do not install correctly. How to I reinstall or download the patch manully. The system info should say 8.01 but it does not.
Thank You

Hi Rachel,
There isnt any patch released for PSE 8.0 version. The patch released is for PRE 8.0 and its name is Premier Elements 8.0.1 patch.
Since you might be having PSE and PRE both installed on your machine, therefore you are seeing this update. Both PSE, PRE and CS4 application use a shared component Adobe Updater and hence on launching it, it checks for updated for all Adobe products so in your case I think you launched PSE and it showed update available for PRE and you misunderstood it to be of PSE 8.
Since, this is a minor update, there wouldnt be any changes in Splash screen of PRE 8 or inside the Help->About splash screen of PRE 8.0.
But we do maintain a repository of its version update in the patched PSE .exe and inside registry editor.
Regards,
Ankush

Patch 105591 not installing -11 ?

Similar Messages

Maybe you are looking for