Patch 120011-14 not applied by smpatch

On a T2000 server, `smpatch analyze' showed 38 patches
that would not apply because they required patch 120011-14.
This patch was listed by `smpatch analyze'. However, `smpatch update' never applied this patch. I had to boot the server in single-user mode to first apply this patch, preceeded by 125547-02 that it required. After this, `smpatch update' would apply the rest of the patches. The curious thing was that the disallowed_patch_list file never contained the missing patch 120011-14. Is this another kernel patch that can't be applied with smpatch?

This is extremely annoying. I didn't even see a warning from
`smpatch update'; the patch just disappeared. I thought that Sun
was going to change things so that kernel patches could be
applied by their patch automation tools?

Similar Messages

Not applied Patch 5117016 after 10.2.0.2 patch set.

Hi ,
database has been upgraded to 10gR2 on solaris 64bit. Patch 5117016 has not been applied after 10.2.0.2 patch set applied. but after that DST patches were applied. here my concern is should i rollback DST patches in order to apply Patch 5117016. as per metalink note:394933.1
please advise me.
thanks in advance,
Hussain.

Hi,
I have got problem when I was installing 10.2.0.3.0 Patch Set after succeed installation of Oracle 10.2.0.1 on Windows server 2003.
Server was shut down by a coworker middle of installation of 10.2.0.3.0 Patch Set resulting that Patch 5556081 : was not applied ( see below opatch_history.txt ) .
When I try to apply 10.2.0.3.0 again it fails saying that Patch Set is already installed.
When I run OUI to see what has been installed I see only Interim Patch #5557962.
I didn't create any database between the installations.
So I can't apply OpachSet README.html advice .
Uninstall PathSet :
C:\> sqlplus /NOLOG
SQL> CONNECT SYS/SYS_Password AS SYSDBA
SQL> SHUTDOWN IMMEDIATE
SQL> EXIT
Should I try to Create a Database and after that apply OpachSet README.html advice
C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch_history.txt
Date & Time : Fri Aug 31 10:56:03 CEST 2007
Oracle Home : C:\oracle\product\10.2.0\db_1
OPatch Ver. : 10.2.0.3.0
Current Dir : C:\oracle\product\10.2.0\db_1\sysman\patches
Command : apply -silent -local -oh C:\oracle\product\10.2.0\db_1 C:\oracle\product\10.2.0\db_1/sysman/patches/5557962
Log File : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2007-08-31_10-56-03AM.log
/regards

Windows Server 2012 R2 - ALL HF's Failing to install as "Does Not Apply to this computer"

Hi,
A general question about hot fix installs.
I have multiple servers that are all Windows 2012 R2. They do not have internet connections, so I have to install the Hotfixes manually. I download the HF's from the ISO download page (https://support.microsoft.com/en-us/kb/913086) every month. I collect them and install in a bulk install during a release cycle ( a couple times a year). I just realized that NO HF's have installed since JUNE 2014. Every HF that shows up in WindowsServer2012R2 directory fail to install with a message of "The update is not applicable to your computer". Which is fine if that was true, but.... I get this message for every HF from the ISO's since June 2014. NOT one HF thinks it is applicable to my computer. Could that be the case? No HF's apply to my Server 2012 systems since June of 2014?
This is my system info, and below that is the results from attempting to install 95 HF's.
C:\TEMP>systeminfo
Host Name: MYHOST
OS Name: Microsoft Windows Server 2012 R2 Datacenter
OS Version: 6.3.9600 N/A Build 9600
OS Manufacturer: Microsoft Corporation
OS Configuration: Member Server
OS Build Type: Multiprocessor Free
Registered Owner: Windows User
Registered Organization:
Product ID: 00252-80025-36226-AA727
Original Install Date: 6/13/2014, 8:04:39 AM
System Boot Time: 3/16/2015, 2:34:45 PM
System Manufacturer: Dell Inc.
System Model: PowerEdge R720
System Type: x64-based PC
Processor(s): 2 Processor(s) Installed.
[01]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
el ~2500 Mhz
[02]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
el ~2500 Mhz
BIOS Version: Dell Inc. 2.2.2, 1/16/2014
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume1
System Locale: en-us;English (United States)
Input Locale: en-us;English (United States)
Time Zone: (UTC-07:00) Mountain Time (US & Canada)
Total Physical Memory: 262,099 MB
Available Physical Memory: 249,337 MB
Virtual Memory: Max Size: 301,011 MB
Virtual Memory: Available: 288,015 MB
Virtual Memory: In Use: 12,996 MB
Page File Location(s): C:\pagefile.sys
Domain: mydomain.sgn
Logon Server: \\MYHOST
Hotfix(s): 25 Hotfix(s) Installed.
[01]: KB2862152
[02]: KB2868626
[03]: KB2876331
[04]: KB2888505
[05]: KB2892074
[06]: KB2893294
[07]: KB2893984
[08]: KB2898785
[09]: KB2898868
[10]: KB2898871
[11]: KB2900986
[12]: KB2901125
[13]: KB2901128
[14]: KB2909210
[15]: KB2909921
[16]: KB2912390
[17]: KB2916036
[18]: KB2919442
[19]: KB2922229
[20]: KB2923392
[21]: KB2925418
[22]: KB2930275
[23]: KB2931358
[24]: KB2931366
[25]: KB2936068
Network Card(s): 6 NIC(s) Installed.
[01]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: ISCSI
DHCP Enabled: No
IP address(es)
[01]: 192.168.1.30
[02]: fe80::38c9:e59c:5ac2:e0a1
[02]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
Client)
Connection Name: NIC3
Status: Hardware not present
[03]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
Client)
Connection Name: MGMT
DHCP Enabled: No
IP address(es)
[01]: 7.48.64.32
[02]: 7.48.64.30
[03]: fe80::f14e:9339:9326:c7fd
[04]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: SLOT 5 Port 1_swport_VMRepwan
DHCP Enabled: Yes
DHCP Server: N/A
IP address(es)
[05]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: NIC2
Status: Hardware not present
[06]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: SLOT 5 Port 2_swport_VMOpswan
DHCP Enabled: Yes
DHCP Server: N/A
IP address(es)
Hyper-V Requirements: A hypervisor has been detected. Features required for
Hyper-V will not be displayed.
I have a script that runs each HF install.. If I run them manually without the tool I get the same results so it is not the script..
Installing 95 patches
for Microsoft Windows Server 2012 R2 Datacenter x64
Repository path: U:\Patch Repository_4_1\2012_R2_HFs\
1. Windows8.1-KB2894852-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
2. Windows8.1-KB2894856-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
3. Windows8.1-KB2920189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
4. Windows8.1-KB2926765-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
5. Windows8.1-KB2928120-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
6. Windows8.1-KB2931358-x64.msu patch status: ALREADY INSTALLED - SKIPPING
7. Windows8.1-KB2931366-x64.msu patch status: ALREADY INSTALLED - SKIPPING
8. Windows8.1-KB2933826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
9. Windows8.1-KB2939576-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
10. Windows8.1-KB2953522-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
11. Windows8.1-KB2957151-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
12. Windows8.1-KB2957189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
13. Windows8.1-KB2957689-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
14. Windows8.1-KB2961072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
15. Windows8.1-KB2961887-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
16. Windows8.1-KB2962872-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
17. Windows8.1-KB2964718-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
18. Windows8.1-KB2964736-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
19. Windows8.1-KB2965788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
20. Windows8.1-KB2966072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
21. Windows8.1-KB2966826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
22. Windows8.1-KB2966828-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
23. Windows8.1-KB2971850-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
24. Windows8.1-KB2972213-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
25. Windows8.1-KB2972280-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
26. Windows8.1-KB2973114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
27. Windows8.1-KB2973201-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
28. Windows8.1-KB2973351-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
29. Windows8.1-KB2974008-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
30. Windows8.1-KB2976627-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
31. Windows8.1-KB2976897-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
32. Windows8.1-KB2977292-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
33. Windows8.1-KB2977629-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
34. Windows8.1-KB2978668-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
35. Windows8.1-KB2982794-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
36. Windows8.1-KB2982998-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
37. Windows8.1-KB2987107-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
38. Windows8.1-KB2987114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
39. Windows8.1-KB2988948-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
40. Windows8.1-KB2992611-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
41. Windows8.1-KB2993651-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
42. Windows8.1-KB2993958-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
43. Windows8.1-KB3000061-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
44. Windows8.1-KB3000483-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
45. Windows8.1-KB3000869-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
46. Windows8.1-KB3001237-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
47. Windows8.1-KB3002657-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
48. Windows8.1-KB3002885-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
49. Windows8.1-KB3003057-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
50. Windows8.1-KB3003381-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
51. Windows8.1-KB3003743-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
52. Windows8.1-KB3004150-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
53. Windows8.1-KB3004361-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
54. Windows8.1-KB3004365-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
55. Windows8.1-KB3005607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
56. Windows8.1-KB3006226-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
57. Windows8.1-KB3008923-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
58. Windows8.1-KB3008925-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
59. Windows8.1-KB3010788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
60. Windows8.1-KB3011780-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
61. Windows8.1-KB3013126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
62. Windows8.1-KB3013455-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
63. Windows8.1-KB3014029-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
64. Windows8.1-KB3018943-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
65. Windows8.1-KB3019215-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
66. Windows8.1-KB3019978-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
67. Windows8.1-KB3020393-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
68. Windows8.1-KB3021674-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
69. Windows8.1-KB3021952-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
70. Windows8.1-KB3023607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
71. Windows8.1-KB3036197-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
72. Windows8.1-KB3021953-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
73. Windows8.1-KB3022777-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
74. Windows8.1-KB3023266-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
75. Windows8.1-KB3023562-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
76. Windows8.1-KB3024663-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
77. Windows8.1-KB3029944-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
78. Windows8.1-KB3030377-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
79. Windows8.1-KB3031432-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
80. Windows8.1-KB3032323-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
81. Windows8.1-KB3032359-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
82. Windows8.1-KB3040335-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
83. Windows8.1-KB3033408-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
84. Windows8.1-KB3033889-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
85. Windows8.1-KB3034196-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
86. Windows8.1-KB3034344-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
87. Windows8.1-KB3035017-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
88. Windows8.1-KB3035034-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
89. Windows8.1-KB3035126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
90. Windows8.1-KB3035131-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
91. Windows8.1-KB3035132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
92. Windows8.1-KB3037634-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
93. Windows8.1-KB3039066-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
94. Windows8.1-KB3044132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
95. Windows8.1-KB3046049-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
Thanks,
Dave

Hi Dave,
Would you please check CBS lg file and other relevant event logs if find more clues? On current situation, please refer to following article and check if can help you.
Update is not applicable to your computer- but it is
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unknown event applying patch 120011-14

When applying patch 120011-14, I have been getting the following message for the last 2-3 hours
/pci@780/pci@0/pci@9/scsi@0 (mpt0):
mpt0: unknown event e received
Is this a cause for concern? Should I let the update continue? Is there something else I should do?
I used the following on the hyperterminal console of a T2000 running Solaris 10 11/06:
# init S
# smpatch update -i 120011-14
Thanks
Manish

I believe the issue you are seeing is where the mpt driver patch is either missing or down rev.
The latest mpt driver patch is:
127127-11 (Sparc)
and
127128-11 (x86)
Please apply the appropriate patch to prevent the errors you are seeing.

OPatch will not apply the patch, exiting...

Hi,
i have 2 Ebs R12 12.0.5 environment.
i just apllied a patch #6116405 on one system and it was fine. the second system (second ebs R12)
seems like it was skipping 2 main components...and i do not know why.
Would someone please give me an advise.
Thanks in advance
here is the command
$opatch apply
SKIPPING_COMPONENT=oracle.developer.reports.core,10.1.2.2.1
SKIPPING_COMPONENT=oracle.developer.reports.core,10.1.2.2.0
here is a logfile
Invoking fuser to check for active processes.
None of the patch actions is applicable to the Oracle Home.
OPatch will not apply the patch, exiting...
OPatch succeeded.
Creating log file "/u01/EBTRN/apps/tech_st/10.1.2/.patch_storage/6863699/Apply_6863699_10-03-2008_15-53-46.log"
Starting OPatch Apply session at 10-03-2008_15-53-46.
Command arguments are: apply
OPatch version is: 1.0.0.0.55
The contents of the file: /etc/oraInst.loc
inventory_loc=/u01/EBTRN/oraInventory
Performing RAC pre-req. check...
Accessing inventory ... (retry 10 times, delay 30 seconds each time)
System Command: /u01/EBTRN/apps/tech_st/10.1.2/jre/1.4.2/bin/java -Doracle.installer.invPtrLoc=/etc/oraInst.loc -Dopatch.retry=10 -Dopatch.delay=30 -classpath "/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/OraInstaller.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/srvm.jar:/u01/EBTRN/apps/tech_st/10.1.2/OPatch/jlib/opatch.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/xmlparserv2.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/share.jar:/u01/EBTRN/apps/tech_st/10.1.2/jlib/srvm.jar" opatch/O2O "/u01/EBTRN/apps/tech_st/10.1.2" "/u01/EBTRN/apps/tech_st/10.1.2/oui" opatch.pl 1.0.0.0.55
Result:
output to OPatch:
NODE_LIST=NULL
NODE_COUNT=0
LOCAL_NODE=NULL
IS_CFS=0
RAC_CODE=0
HOME_INDEX=2
This is not a RAC system
Backing up the rollback script as "/u01/EBTRN/apps/tech_st/10.1.2/.patch_storage/6863699/rollback_6863699.sh_10-03-2008_15-53-47"
Interim Patch ID: 6863699
Checking the patch inventory.
Component Name: oracle.developer.reports.core
Component Version: 10.1.2.2.1
Component Name: oracle.developer.reports.core
Component Version: 10.1.2.2.0
Bugs fixed by this patch 6863699:
6116405 : AS11 CLASSIC - REPORTS MATS RUN HANGS
Reading patch XML files and doing sanity checks.
Read the command to action file map.
Performing initial safety check.
Invoking fuser to check for active processes.
Checking active processes:
Accessing inventory ... (retry 10 times, delay 30 seconds each time)
System Command: /u01/EBTRN/apps/tech_st/10.1.2/jre/1.4.2/bin/java -Doracle.installer.invPtrLoc=/etc/oraInst.loc -Dopatch.retry=10 -Dopatch.delay=30 -classpath "/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/OraInstaller.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/srvm.jar:/u01/EBTRN/apps/tech_st/10.1.2/OPatch/jlib/opatch.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/xmlparserv2.jar:/u01/EBTRN/apps/tech_st/10.1.2/oui/jlib/share.jar" opatch/CheckConflict "/u01/EBTRN/apps/tech_st/10.1.2/oui" "/u01/EBTRN/apps/tech_st/10.1.2" opatch.pl 1.0.0.0.55 6863699 "6116405 " /u01/EBTRN/apps/tech_st/10.1.2/OPatch/6863699/etc/config/actions
Result :
SKIPPING_COMPONENT=oracle.developer.reports.core,10.1.2.2.1
SKIPPING_COMPONENT=oracle.developer.reports.core,10.1.2.2.0
None of the patch actions is applicable to the Oracle Home.
OPatch will not apply the patch, exiting...
OPatch succeeded.

There was a bug. even in readme file was asking for Opatch 1.0.0.0.52 and mine was 1.0.0.0.0.55
tech support had told me that i need to upgrade it at least 1.0.0.0.0.57 ans up.I had a suspect in opatch version from the beginning, but did not expect the version to be incorrect in the patch README file -- which I should NOT do next time :)
no wonder my other instance with version 1.0.0.0.0.57 works fine with this patch.
Thanks everyone.Thanks for sharing the solution.

Patch 119578-10 will not apply

This patch would not apply using the updatemanager. When it was applied by itself, the process never completed over the night. I rebooted the machine.
I downloaded the zip patch, extracted and then I shut it down in single-user mode to apply it. That was the only technique I knew.
I did see discussion threads in the past about the "fmd" process. Extract steps/disclaimers would be needed to apply this patch as well. It is not updatemanager compatible.

Yeah, that problem was reported for 119578-9.
It was supposed to be fixed by now.
But here 119578-10 has been released, and its still not fixed.

Acrobat Pro 10 Actions Not Applying Fast Web View

Acrobat Pro 10 actions are pretty useful overall, however they are not applying Fast Web View all the time. In my opinion, all PDFs generated today should be Fast Web View by default, but among the many applications which allow for PDF creation, not all apply Fast Web View for some reason.
I did see http://forums.adobe.com/message/3335827for a potential band-aid fix. Unfortunately, it did not work for me.
Here is the text from my Action sequence file:
<</Commands [/c << /0 [/c << /Config [/c <<   /UIPolicy [/i 3]
>>]
/HandlerName [/a /FlattenOCGs]
/Params [/c <<>>]
/Title [/t ()]
>>]
/1 [/c << /Config [/c <<   /UIPolicy [/i 3]
>>]
/HandlerName [/a /ReduceFileSize]
/Params [/c <<   /RFSCompatibility [/i 6]
>>]
/Title [/t (Reduce File Size)]
>>]
/2 [/c << /Config [/c <<   /UIPolicy [/i 3]
>>]
/HandlerName [/a /ExamineDocCmd]
/Params [/c <<   /RmAnnots [/b false]
   /RmAttachments [/b false]
   /RmBookmarks [/b false]
   /RmDeletedContent [/b true]
   /RmFormFields [/b true]
   /RmHiddenLayers [/b true]
   /RmHiddenText [/b false]
   /RmLinksActionsJS [/b false]
   /RmMetadata [/b false]
   /RmOverlappingObjects [/b false]
   /RmSearchIndex [/b false]
>>]
/Title [/t (Remove Hidden Information)]
>>]
>>]
/Input [/c << /FileVariation [/i 3]
>>]
/Output [/c << /AddToBaseName [/b false]
/DontOverwrite [/b false]
/EmbedIndex [/b false]
/FileVariation [/i 2]
/HandleOutput [/b true]
/NumbericNaming [/b false]
/OptimizePDF [/b true]
/PresetName [/t (test2)]
/RunPDFOptimizer [/b true]
>>]
>>
As you can see, the "/OptimizePDF [/b true]" is set per the instructions in the aforementioned link. It still does not set Fast Web View all the time. I ran a test of the action on a batch of 10 PDFs, some were set to Fast Web View and some were not. While one of the PDFs that was not set to Fast Web View was open in Acrobat, I ran the same Action again and it did apply Fast Web View! I even installed the latest patch hoping that would fix it, but unfortunately it did not. Distiller does in fact set Fast Web View, but it won't work on PDFs. The only way I can find to guarantee the establishment of Fast Web View is to manually do a Save As on every file which I think is asking a bit much when you deal with hundreds of PDFs on any given day. Also that would effectively defeat the purpose of running an Action on hundreds of PDFs in the first place.
Any ideas?

There is a bug because of which fast web view is always disabled. While that is fixed, here the workaround. Save the action and open the .sequ file in Notepad. Change:
                /OptimizePDF [/b false]
to
                /OptimizePDF [/b true]

Patch 19591087 unable to apply weblogic 12.1.3

I am unable to apply patch 19591087 in weblogic 12.1.3
getting below error logs
Environment:
   OPatch.ORACLE_HOME=/apps/wlserver/12.1.3
   oracle.installer.invPtrLoc=/apps/wlserver/12.1.3/oraInst.loc
   oracle.installer.oui_loc=/apps/wlserver/12.1.3/oui
   oracle.installer.library_loc=/apps/wlserver/12.1.3/oui/lib/linux64
   oracle.installer.startup_location=/apps/wlserver/12.1.3/oui
   OPatch.PLATFORM_ID=
   os.name=Linux
   OPatch.NO_FUSER=
   OPatch.SKIP_VERIFY=null
   OPatch.SKIP_VERIFY_SPACE=null
   oracle.installer.clusterEnabled=false
   TRACING.ENABLED=null
   TRACING.LEVEL=null
   OPatch.DEBUG=false
   OPATCH_VERSION=13.2.0.0.0
   Bundled OPatch Property File=properties
   Minimum OUI version: 10.2
   OPatch.PATH=/opt/boksm/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/opt/novell/zenworks/bin
   OPatch.MW_HOME=/apps/wlserver/12.1.3
   OPatch.WL_HOME=
   OPatch.COMMON_COMPONENTS_HOME=
Oracle Home       : /apps/wlserver/12.1.3
Central Inventory : /opt/home/mwswls/oraInventory
   from           : /apps/wlserver/12.1.3/oraInst.loc
OPatch version    : 13.2.0.0.0
OUI version       : 13.2.0.0.0
Log file location : /apps/wlserver/12.1.3/cfgtoollogs/opatch/opatch2014-12-19_04-35-15AM_1.log
OPatch detects the Middleware Home as "/apps/wlserver/12.1.3"
Dec 19, 2014 4:35:23 AM oracle.sysman.oii.oiii.OiiiInstallAreaControl initAreaControl
INFO: Install area Control created with access level 0
Bugs fixed by this patch 19591087:
   18820382: Fix for Bug 18820382
Applying interim patch '19591087' to OH '/apps/wlserver/12.1.3'
Verifying environment and performing prerequisite checks...
Running prerequisite check "CheckMinimumOPatchVersion" ...
All patches can be applied using this OPatch.
Prerequisite check "CheckMinimumOPatchVersion" passed.
Running prerequisite check "CheckPatchingModel" ...
Prerequisite check "CheckPatchingModel" passed.
Running prerequisite check "CheckForIdenticalPatchInOracleHome" ...
Prerequisite check "CheckForIdenticalPatchInOracleHome" passed.
Patch "19591087" is ignored as it is not a "Fusion Applications patch".
Prerequisite check "CheckFileVersionFormat" passed.
Check if patch "19591087" is a no-op patch.
We have required comps greater than zero, so returning false for no-op patch "19591087"
None of the selected patches are no-op. patches..
There are some (or) all patches that are not no-ops.
Running prerequisite check "CheckFusionAppsCompatible" ...
OPatch is compatible with OUI for Fusion Apps patching.
Running prerequisite check "CheckForInputValues" ...
Input values is present for the all the actions of the given patches.
Running prerequisite check "CheckSystemSpace" ...
Finding the total space needed...
Total space needed for the patches are: 4663474
Checking if enough space is present on the disk...
Required amount of space is availale on the disk.
Enough system space is available.
Running prerequisite check "CheckSystemCommandAvailable" ...
All the required commands are available.
All the required system commands are present.
Running prerequisite check "CheckPatchApplicableOnCurrentPlatform" ...
Genereic Platform ID 0is specified for patch : 19591087
All the given patches are applicable on the current platform.
Running prerequisite check "CheckApplicable" ...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 19591087: Required component(s) missing : [ oracle.jrf.adfrt, 12.1.3.0.0 ] , [ oracle.jrf.adfrt, 12.1.3.0.0 ]
Log file location: /apps/wlserver/12.1.3/cfgtoollogs/opatch/opatch2014-12-19_04-35-15AM_1.log
Recommended actions: This patch requires some components to be installed in the home. Either the Oracle Home doesn't have the components or this patch is not suitable for this Oracle Home.
OPatch failed with error code 39
Package/s not installed. Please verify the patch logs.

Hi Mike,
Could you please guide which one exactly from the below link. I have installed generic Oracle WebLogic Server and Oracle Coherence 12.1.3
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
Thanks

Does Peopletools patches need to be applied to PS_CFG_HOME?

Hello,
I am using Peopletools 8.52 version.
Need help to find out whether Peopletools patches need to be applied on PS_CFG_HOME also along with PS_HOME?
Thanks

The *cfg are not touched by the patches, so PS_CFG_HOME is not directly touched until you reconfigure the domain.
On the other hands, the patch may or may not modify the cfx/ubx (in PS_HOME)... which are used to create/reconfigure the domain configuration files (in your PS_CFG_HOME), in that case only you'll have to reconfigure your domain.
I do not see any reason to apply patch in PS_CFG_HOME, and if it happened, then except it is dirty, it will probably do not harm if and only if you continue to use PS_HOME to run psadmin.
Nicolas.

WSUS GPO not applying on server restart

At first I thought this was limited to a single SBS 2008 server but I have now seen this behavior on another SBS2008 and SBS2011 server. Basically what happens is I patch the server, I restart the server but... somehow the GPO for WSUS does not apply
and leaves the server Windows update settings set on Download automatically and install at 3am when it should be the Standard "Download and Notify for install"
I can open a command prompt and perform a gpupdate /force and the the correct policy immediately applies.
Has anyone seen this behavior? Is it possible a windows patch that has caused this issue. It must be something common amongst all three different instances of SBS. I do not see any errors in event logs regarding group policy.
Please Help

Hi skahlam,
Does this issue always occur when you reboot the server?
If yes, to verify if this issue is related to the updates, please try to remove the updates installed recently.
If issue persists after removing the updates, please try to run the gpresult /h C:\report.html
to check the detailed information about the GPO.
Note: This procedure needs the privilege of the Administrator.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

General authorizations do not apply

estimated in the menu general authorizations, changes do not apply and there is no error message.
Someone who can help me solve this problem.
Thank you.

Hi Jose,
Please advice your SAP Version and Patch Level.
Please check below link.
Unable to change authorization(SAP B1 8.8 PL14
Hope this help
Regards::::
Atul Chakraborty

How can I check the patch I have been apply?

Dear all:
How can I check the patch I have been apply in the Financial Management?Does it have the record in the server? or has the SQL to query?
Regards
Terry

Hi Terry;
In addition to Hussein Sawwan great post, please also check those notes-recomendation on
how to check MINIPACK 11I.AD.I.5 ?
Regard
Helios

MDT 2013, D: Wim not applying after update from MDT 2010 to 2013

Updated MDT from MDT 2010 Update 1 to MDT 2012 Update 1, uninstalled WAIK, Installed MDT 2013, and then ADK, Upgraded all Deployment shares along the way, and now the extra drive (D:) Wim will not apply to Drive, i have tried two different ways to handle
the said action, the first was using the Unattend.xml, adding the DataImage Action, the other was using an Imagex command from the MDT task sequence. neither is applying the Wim, before the upgrade this worked. has any one else had this issue?
Thank you,
Dane Zittritsch
Thinix Support Manager

I moved from MDT 2010 to MDT 2013 and its just not working, i have tried a few different methods, the old way we used the
Unattend.xml and placed a install order and that always worked, but now i am trying to use Imagex and its not applying the wim, when i get in the image the D:\ (Second Drive) is missing files. Now here is the weird part, if i re-run the task sequence
the D WIM is applied, but that's counter productive. i will apply my TS.xml information.
Ts.xml
<?xml version="1.0"?>
-<sequence description="A complete task sequence for deploying a client operating system" name="Standard Client Task Sequence" version="3.00"> -<globalVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable>
<variable name="DestinationDisk" property="DestinationDisk">0</variable>
<variable name="DestinationPartition" property="DestinationPartition">2</variable>
<variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable>
<variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
<variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/>
<variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable>
</globalVarList>
-<group description="Initialize the TS environment" name="Initialization" expand="true" continueOnError="false" disable="false">
- <step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly"
property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> </group> -<group description="Test"
name="Validation" expand="true" continueOnError="false" disable="false"> -<condition> -<operator type="or"> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable> <variable
name="Operator">equals</variable> <variable name="Value">VALIDATION</variable> </expression> </operator> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
<variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Check BIOS" continueOnError="false" disable="false"
startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBIOSCheck.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
-<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> </group> -<group description="" name="State Capture" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATECAPTURE</variable> </expression> </condition> -<step description="" name="Next Phase" continueOnError="false"
disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
</group> -<group description="" name="Preinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
<variable name="Operator">equals</variable> <variable name="Value">PREINSTALL</variable> </expression> </condition> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
</step> -<group description="" name="New Computer only" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DeploymentType</variable>
<variable name="Operator">equals</variable> <variable name="Value">NEWCOMPUTER</variable> </expression> </condition> -<step description="" name="Validate" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="BDD_Validate"> -<defaultVarList> <variable name="ImageSize" property="ImageSize">0</variable> <variable name="ImageProcessorSpeed" property="ImageProcessorSpeed">800</variable> <variable name="ImageMemory" property="ImageMemory">768</variable>
<variable name="VerifyOS" property="VerifyOS">CLIENT</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIValidate.wsf"</action> </step> -<step description="" name="Format and Partition Disk" continueOnError="false"
disable="true" successCodeList="0 3010" type="SMS_TaskSequence_PartitionDiskAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="OSDDiskIndex" property="DiskIndex">0</variable> <variable name="DONotCreateExtraPartition"
property="DONotCreateExtraPartition"/> <variable name="OSDPartitions0Type" property="Partitions0Type">Primary</variable> <variable name="OSDPartitions0FileSystem" property="Partitions0FileSystem">NTFS</variable> <variable name="OSDPartitions0Bootable"
property="Partitions0Bootable">True</variable> <variable name="OSDPartitions0QuickFormat" property="Partitions0QuickFormat">True</variable> <variable name="OSDPartitions0VolumeName" property="Partitions0VolumeName">OSDisk</variable>
<variable name="OSDPartitions0Size" property="Partitions0Size">100</variable> <variable name="OSDPartitions0SizeUnits" property="Partitions0SizeUnits">%</variable> <variable name="OSDPartitions0VolumeLetterVariable" property="Partitions0VolumeLetterVariable">OSDisk</variable>
<variable name="OSDPartitions" property="Partitions">1</variable> <variable name="OSDPartitionStyle" property="PartitionStyle">MBR</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDiskpart.wsf"</action>
</step> -<step description="You can change the size of the partition(s) in the \Scripts\WinRE\DiskConfig.txt file. Make sure your partition is large enough to hold the recovery image if you install alot of software. Current configuration is 160GB
for recovery, 60 for OS, 10 for scratch" name="Format and Partition Disk [Custom]" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable
name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010 BETA\Configure-HDD.cmd"</action> </step> -<step
description="" name="Copy scripts" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> </group> -<step description="" name="Configure" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InjectDrivers"
runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DriverSelectionProfile" property="DriverSelectionProfile">Dell OptiPlex 790</variable> <variable name="DriverInjectionMode" property="DriverInjectionMode">ALL</variable>
</defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> </step> -<step description="" name="Apply Patches" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallUpdatesOffline">
<action>cscript.exe "%SCRIPTROOT%\ZTIPatches.wsf"</action> -<defaultVarList> <variable name="PackageSelectionProfile" property="PackageSelectionProfile">All Packages</variable> </defaultVarList> </step> -<step description=""
name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> </group> -<group description="" name="Install" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">INSTALL</variable> </expression> </condition> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description="" name="Install Operating System" continueOnError="false" disable="false" successCodeList="0 3010" type="BDD_InstallOS" runIn="WinPEandFullOS">
-<defaultVarList> <variable name="OSGUID" property="OSGUID">{52bb4035-96e5-46f3-9d17-3d2a363895c3}</variable> <variable name="DestinationDisk" property="DestinationDisk">0</variable> <variable name="DestinationPartition" property="DestinationPartition">2</variable>
<variable name="DestinationOSDriveLetter" property="DestinationOSDriveLetter"/> <variable name="DestinationOSVariable" property="DestinationOSVariable">OSDisk</variable> <variable name="DestinationOSRefresh" property="DestinationOSRefresh"/>
<variable name="DestinationOSInstallType" property="DestinationOSInstallType">ByDiskPartition</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf"</action> </step> -<step description="" name="Restart
computer" continueOnError="false" disable="false" successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="SMSRebootMessage" property="Message"/> <variable name="SMSRebootTimeout"
property="MessageTimeout">60</variable> <variable name="SMSRebootTarget" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Next Phase" continueOnError="false"
disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
</group> -<group description="" name="Postinstall" expand="true" continueOnError="false" disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">PHASE</variable>
<variable name="Operator">equals</variable> <variable name="Value">POSTINSTALL</variable> </expression> </condition> -<step description="" name="Copy Scripts" continueOnError="false" disable="true" startIn="" successCodeList="0
3010"> <action>cscript.exe "%SCRIPTROOT%\LTICopyScripts.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
<variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Configure"
continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIConfigure.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable
name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> -<step description="Applies the D: wim to System " name="Apply Scratch Drive" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS">
-<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"\\thinix-dev1\navyImage$\Tools\x86\imagex.exe" /apply
"\\thinix-dev1\navyImage$\Operating Systems\navycnic-gen_20131226100000\navycnic-gen_20131226100000_ddrive.wim" 1 D:\</action> </step> -<step description="" name="Inject Drivers" continueOnError="false" disable="false" startIn="" successCodeList="0
3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIdrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
<variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<group description="" name="Custom
Tasks" expand="true" continueOnError="false" disable="false"> -<step description="Makes sure there is no Boot Config files on C drive and changes them to R drive:" name="Recovery Partition" continueOnError="false" disable="false" startIn="" successCodeList="0
3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\Re-assign
DriveLetter.cmd"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false" disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList>
<variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> -<step description=""
name="[Custom] TDRBCD" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable
name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\TDRBCD.exe"</action> </step> -<step description="" name="[Custom] Apply D Wim " continueOnError="false"
disable="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_RunCommandLineAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="PackageID" property="PackageID"/> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> <action>"%SCRIPTROOT%\Dell_Optiplex_7010\DWim.exe"</action> </step> </group> -<step description="" name="Next Phase" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\ZTINextPhase.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Set Phase" continueOnError="false" disable="false" successCodeList="0
3010" type="SMS_TaskSequence_SetVariableAction"> -<defaultVarList> <variable name="VariableName" property="VariableName">PHASE</variable> <variable name="VariableValue" property="VariableValue">STATERESTORE</variable> </defaultVarList>
<action>cscript.exe "%SCRIPTROOT%\ZTISetVariable.wsf"</action> </step> </group> -<group description="" name="State Restore" expand="false" continueOnError="false" disable="true"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression">
<variable name="Variable">PHASE</variable> <variable name="Operator">equals</variable> <variable name="Value">STATERESTORE</variable> </expression> </condition> -<step description="" name="Gather local only"
continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/>
</defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action> </step> -<step description="" name="Post-Apply Cleanup" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\LTIApply.wsf" /post</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Recover From Domain " continueOnError="false" disable="false"
successCodeList="0 3010" type="BDD_RecoverDomainJoin" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="DomainErrorRecovery" property="DomainErrorRecovery">Auto</variable> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIDomainJoin.wsf"
</action> </step> -<step description="" name="Tattoo" continueOnError="true" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTITatoo.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Opt In to CEIP and WER" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIOptIn.wsf"
/CEIP:YES /WER:YES</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Windows Update (Pre-Application Installation)" continueOnError="true"
disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName"
property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step>
-<step description="" name="Install Applications" continueOnError="false" disable="false" startIn="" successCodeList="0 3010" type="BDD_InstallApplication"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplications.wsf"</action> -<defaultVarList>
<variable name="ApplicationGUID" property="ApplicationGUID"/> <variable name="ApplicationSuccessCodes" property="ApplicationSuccessCodes">0 3010</variable> </defaultVarList> </step> -<step description="" name="Windows Update
(Post-Application Installation)" continueOnError="true" disable="true" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIWindowsUpdate.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> <group description="" name="Custom Tasks" expand="true" continueOnError="false" disable="false"/> -<step description="" name="Enable BitLocker" continueOnError="true" startIn="" successCodeList="0 3010" type="SMS_TaskSequence_EnableBitLockerAction">
<action>cscript.exe "%SCRIPTROOT%\ZTIBde.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">BdeInstallSuppress</variable> <variable name="Operator">notEquals</variable>
<variable name="Value">YES</variable> </expression> </condition> -<defaultVarList> <variable name="OSDBitLockerTargetDrive" property="BdeTargetDriveLetter"/> <variable name="OSDBitLockerMode" property="BdeInstall">TPM</variable>
<variable name="OSDBitLockerStartupKeyDrive" property="BdeKeyLocation"/> <variable name="OSDBitLockerCreateRecoveryPassword" property="BdeRecoveryPassword">AD</variable> <variable name="OSDBitLockerWaitForEncryption" property="WaitForEncryption">false</variable>
</defaultVarList> </step> -<step description="" name="Restore User State" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIUserState.wsf" /restore</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restore Groups" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\ZTIGroups.wsf" /restore</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable
name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Apply Local GPO Package"
continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIApplyGPOPack.wsf"</action> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable
name="Variable">ApplyGPOPack</variable> <variable name="Operator">notEquals</variable> <variable name="Value">NO</variable> </expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> -<group description="" name="Imaging" expand="false" continueOnError="false" disable="false"> <action/> -<group description="" name="Prepare Only" expand="false" continueOnError="false" disable="false">
-<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">PREPARE</variable>
</expression> </condition> -<step description="" name="Copy Sysprep files" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Sysprep Only" expand="false" continueOnError="false" disable="false"> -<condition>
-<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">SYSPREP</variable> </expression>
</condition> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action>
-<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe
"%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> </group> -<group description="" name="Capture Image" expand="false" continueOnError="false"
disable="false"> -<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">DoCapture</variable> <variable name="Operator">equals</variable> <variable name="Value">YES</variable>
</expression> </condition> -<step description="" name="Apply Windows PE" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTIApply.wsf" /PE /STAGE</action> -<defaultVarList>
<variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/>
<variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Add mass storage drivers to sysprep.inf for XP and 2003" continueOnError="false" disable="false" startIn=""
successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIDrivers.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/>
<variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Execute
Sysprep" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\LTISysprep.wsf"</action> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable>
<variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable>
</defaultVarList> </step> -<step description="" name="Apply Windows PE (BCD)" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%_SMSTSMDataPath%\Scripts\LTIApply.wsf" /PE /BCD</action>
-<condition> -<expression type="SMS_TaskSequence_VariableConditionExpression"> <variable name="Variable">ImageBuild</variable> <variable name="Operator">greaterEqual</variable> <variable name="Value">6</variable>
</expression> </condition> -<defaultVarList> <variable name="RunAsUser" property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword"
property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile" property="LoadProfile">false</variable> </defaultVarList> </step> -<step description="" name="Restart computer" continueOnError="false" disable="false"
successCodeList="0 3010" type="SMS_TaskSequence_RebootAction" runIn="WinPEandFullOS"> -<defaultVarList> <variable name="Message" property="Message"/> <variable name="MessageTimeout" property="MessageTimeout">60</variable> <variable
name="Target" property="Target"/> </defaultVarList> <action>smsboot.exe /target:WinPE</action> </step> -<step description="" name="Gather local only" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"
type="BDD_Gather"> -<defaultVarList> <variable name="GatherLocalOnly" property="GatherLocalOnly">true</variable> <variable name="RulesFile" property="RulesFile"/> </defaultVarList> <action>cscript.exe "%SCRIPTROOT%\ZTIGather.wsf"</action>
</step> -<step description="" name="Create WIM" continueOnError="false" disable="false" startIn="" successCodeList="0 3010"> <action>cscript.exe "%SCRIPTROOT%\ZTIBackup.wsf"</action> -<defaultVarList> <variable name="RunAsUser"
property="RunAsUser">false</variable> <variable name="SMSTSRunCommandLineUserName" property="SMSTSRunCommandLineUserName"/> <variable name="SMSTSRunCommandLineUserPassword" property="SMSTSRunCommandLineUserPassword"/> <variable name="LoadProfile"
property="LoadProfile">false</variable> </defaultVarList> </step> </group> </group> </group> </sequence>

Updates not applying to 2012 servers

Hi guys,
Our ConfigMgr server is 2012R2 with SUP.
I have noticed that our 2012 servers are not applying updates.
Checking in the WindowsUpdate.log for these servers I can see the following:
WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
Checking online and most are suggesting installing a WSUS update – KB2734608 But our WSUS is v6.2 and I do not believe this update is applicable.
The UpdatesDeployment.log shows this (but no actual errors): No current service window available to run updates assignment with time required = 1 Attempting to install 0 updates
I have confirmed the maintenance windows for the servers via the built in report.
Any help getting these servers patched would be greatly appreciated.
Edit: SCEP updates are being applied ok.
Regards,
Locust12

The errors are spread through the file, I have copied a few repeating ones here and linked the full file via Dropbox.
WARNING: WU client failed Searching for update with error 0x80248014
WARNING: Exit code = 0x00000000, Result code = 0x80248014
COMAPI   WARNING: Operation failed due to earlier error, hr=80248014
REPORT EVENT: {32898FA6-A6CE-4B10-ABA0-8D43666E9B3A}   2015-01-11 13:04:34:392+1100   1   148 [AGENT_DETECTION_FAILED]   101   {00000000-0000-0000-0000-000000000000}
0   80248014   System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)   Failure   Software Synchronization   Windows Update Client failed to detect with
error 0x80248014.
WARNING: Failed to get service object: 80248014
WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
WARNING:     IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 1, GetLastError=2250
https://dl.dropboxusercontent.com/u/32055319/WindowsUpdateEdited.log
Regards,
Locust12

Determine which security patch or Critical patch update has been applied

Hi,
Anyone know how to determine which security patch or Critical patch update has been applied to the database? For Unix and also Win 2000k database server..
Thank You

Use the lsinventory command of opatch (Oracle's patch
installation tool) to list the patches installed.
If you have Perl and opatch installed, this is simply
a matter of typing:
opatch lsinventory
from the command line.
For further information on opatch, see metalink note
293369.1
Hope this helps.
Kailash.

Patch 120011-14 not applied by smpatch

Similar Messages

Maybe you are looking for