Patch 121081-06 (sparc) is broke and Patch 121082-06 (x86) too

This patch contains the CACert.pem but it does not get copied to destination directory. After patchadd runs, you are left with the old CACert.pem in the directory, and this breaks cc-transport from signing into the Sun SSL site.

The patches will install without any errors but, as I said, you will not get the new CACert.pem installed to its directory. This cert allows you to have your machine checked for updated patches by communicating with the Sun Update site. The program cc-transport run in the background, and communicates with the site via ssl, unless the CACert.pem is the older version. You can test this with the command:
"/usr/lib/cc-cfw/platform/transport/bin/cctrunner -p"

Similar Messages

  • Saving spot and patch adjustments

    After using spot and patch, the circles delineating my spot and patch work remain. How do I save the image after spotting and patching so that I can view the image as complete without the track marks of my work?
    Thanks very much.
    p.s.
    I think Apple has made a big mistake with their very high fee for support.
    Steve Pariser
    [email protected]

    And it's also worth pointing out that even when the Spot & Patch tool is NOT selected, you can still adjust all of the Spot & Patch parameters on the Adjustments HUD or Panel without seeing the yellow target circles.
    I do this all the time, because it's much easier to make these adjustments without the circles visible. With the Spot & Patch tool selected, click on the particular spot that you want to modify. Then press "A" to switch back to the Selection tool (to hide the circles) and then make your adjustments to Opacity, Softness, etc. with an unobstructed view.
    Same deal works for Red-eye.

  • ISW 6.0 and patch 119214 (NSS/NSPR/JSS) will it ever be solved

    I am just wondering if the problem with ISW 6 and patch 119214-19 and higher will ever be fixed.
    Sun bugid: 6862663
    Synopsis: ISW core install breaks dsadm
    ld.si.1: libnss3.so: version NSS_3.12 not found (require by file /var/mps/serverroot/lib/libss13.so)
    I have al always got over the problem by not install the patch and staying at version -17, but version -19 is installed by default on the latest version of Solaris.
    Setup is:
    Solaris 10 10/09
    DSEE 7.0
    ISW 6
    The who installation completly fails since patch 119214-19 is installed. I guess this software (ISW) must be EOL since it would not pass the default install testers..
    I have fixed the problem by coping files from an older installationed and putting the files back after the ISW installtion finished..
    Come on we need a fix or release ISW 6.3....
    Thanks
    Andrew

    And the corresponding patches for Solaris 9 SPARC, 119211-xx, continue to break DS5.2 :(

  • Patch 121081-03 will prevent updates from appearing

    Patch 121081-03 will prevent updates from appearing in the hosted application. We are going to bad patch the current rev and release a fix ASAP. The associate change request is 6395708.
    Summary:
    Users who manage systems through the SunUC hosted application should not install 121081-03. The patch will prevent updates for the system from appearing in the application
    Work Around:
    # /usr/lib/cc-cfw/framework/lib/cc-client-adm stop
    # /usr/lib/cc-cfw/framework/lib/cc-client-adm disable
    # /usr/lib/cc-cfw/framework/lib/cc-client-adm enable
    # /usr/lib/cc-cfw/framework/lib/cc-client-adm start
    Symptoms
    Error messages in /var/adm/messages like this:
    Mar 8 14:31:54 magrathea IM-CC_ENG-inv cc-invagent: [ID 702911 daemon.warning]Inventory Agent returned error: 1 : /usr/lib/cc-cfw/platform/invagent/bin/cc-invagent: @JAVA_HOME@/bin/java: not found
    When cc-invagent is run on the command line I see errors like this:
    touch: @LOCK_DIR@/lock.14769 cannot create@LOCK_DIR@: No such file or directory

    Patch 121081-03 will prevent updates from appearing in the hosted application. We are going to bad patch the current rev and release a fix ASAP. The associate change request is 6395708.
    Summary:
    Users who manage systems through the SunUC hosted application should not install 121081-03. The patch will prevent updates for the system from appearing in the application
    Work Around:
    # /usr/lib/cc-cfw/framework/lib/cc-client-adm stop
    # /usr/lib/cc-cfw/framework/lib/cc-client-adm disable
    # /usr/lib/cc-cfw/framework/lib/cc-client-adm enable
    # /usr/lib/cc-cfw/framework/lib/cc-client-adm start
    Symptoms
    Error messages in /var/adm/messages like this:
    Mar 8 14:31:54 magrathea IM-CC_ENG-inv cc-invagent: [ID 702911 daemon.warning]Inventory Agent returned error: 1 : /usr/lib/cc-cfw/platform/invagent/bin/cc-invagent: @JAVA_HOME@/bin/java: not found
    When cc-invagent is run on the command line I see errors like this:
    touch: @LOCK_DIR@/lock.14769 cannot create@LOCK_DIR@: No such file or directory

  • 11i to R12 upgrade : Unable to merge patch 9179588:R12.AD.B with 9477107:R12.AD.B and patch 7461070:R12.AD.B.1

    Hello Sir,
    As per readme for Patch 9179588, I am trying to merge patch (9179588:R12.AD.B) with 9477107:R12.AD.B and R12.AD.B.1
    (patch 7461070). When I run admrgpch without -admode option, admrgpch completes successfully.
    However, when I just add -admode option in same command, getting error that "invalid option -s". Please see below details and suggest since there is Note: This merge should be a full merge using -admode.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    drix10:/fmstop/patches/R1211AD/merge>ls -lrt
    total 13992
    -rw-r--r-- 1 appltest dba 7035668 Aug 03 10:59 p7461070_R12_AIX64-5L.zip
    -rw-r--r-- 1 appltest dba 79016 Aug 04 03:48 p9179588_R12.AD.B_R12_GENERIC.zip
    -rw-r--r-- 1 appltest dba 38579 Aug 04 05:22 p9477107_R12.AD.B_R12_GENERIC.zip
    -rw-r--r-- 1 appltest dba 94 Aug 04 13:27 manifest.txt
    drix10:/fmstop/patches/R1211AD/merge>cat manifest.txt
    p7461070_R12_AIX64-5L.zip
    p9179588_R12.AD.B_R12_GENERIC.zip
    p9477107_R12.AD.B_R12_GENERIC.zip
    drix10:/fmstop/patches/R1211AD/merge>
    drix10:/fmstop/patches/R1211AD/merge>admrgpch -admode -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
    Error: Invalid option: -s
    usage: admrgpch -help
    admrgpch <source_directory> <destination_directory>
    admrgpch -s <source_directory> -d <destination_directory>
    [-verbose <level>] [-merge_name <pattern>]
    [-manifest <filename>] [-logfile <filename>]
    where
    * -help Print help message.
    * -verbose <level> Can be one of: { 0(SILENT),
    1(QUIET), 2(VERBOSE) or 3(LOUD) }
    Default - 1(QUIET).
    * -merge_name <pattern> The name of the merged patch (max 24 characters).
    Default - "merged".
    * -s <source_directory> Path of source directory where all patches to be
    merged have been unzipped.
    * -d <destination_directory> Path of destination directory where the merged
    patch will be created.
    * -manifest <filename> Full pathname of a file containing the list of
    patch zip files to be merged.
    * -logfile <filename> Admrgpch log file name.
    Default:"<CWD>/admrgpch.log".
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Without option -admode :
    drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
    unzipping p7461070_R12_AIX64-5L.zip..
    unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
    unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
    Executing the merge of the patch drivers
    -- Processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Processing patch: /fmstop/patches/R1211AD/merge/9477107
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
    Copying files...
    5% complete. Copied 44 files of 876...
    10% complete. Copied 88 files of 876...
    15% complete. Copied 132 files of 876...
    20% complete. Copied 176 files of 876...
    25% complete. Copied 219 files of 876...
    30% complete. Copied 263 files of 876...
    35% complete. Copied 307 files of 876...
    40% complete. Copied 351 files of 876...
    45% complete. Copied 395 files of 876...
    50% complete. Copied 438 files of 876...
    55% complete. Copied 482 files of 876...
    60% complete. Copied 526 files of 876...
    65% complete. Copied 570 files of 876...
    70% complete. Copied 614 files of 876...
    75% complete. Copied 657 files of 876...
    80% complete. Copied 701 files of 876...
    85% complete. Copied 745 files of 876...
    90% complete. Copied 789 files of 876...
    95% complete. Copied 833 files of 876...
    100% complete. Copied 876 files of 876...
    Character-set converting files...
    3 unified drivers merged.
    Patch merge completed successfully
    Please check the log file at ./admrgpch.log.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    I am executing admrgpch after sourcing 11i environment and version for admrgpch is :
    drix10:/fmstop/fmstest/fmstestappl/ad/11.5.0/bin>adident Header admerge.pl
    admerge.pl:
    $Header admerge.pl 115.22 2008/09/18 12:12:08 nissubra noship $

    Hi Srini,
    Thanks a lot !
    Actually, I tried that one as well by running admrgpch from newly installed R12 code tree and I got below error.
    drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>ls -rlt admrgpch
    -rwxr-xr-x    1 appltest dba        14293576 Mar 30 2009  admrgpch
    drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
    exec(): 0509-036 Cannot load program ./admrgpch because of the following errors:
            0509-150   Dependent module libnnz10.so could not be loaded.
            0509-022 Cannot load module libnnz10.so.
            0509-026 System error: A file or directory in the path name does not exist.
    Then I sourced R12 environment file and ran same command. Its completed successfully.
    drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
    unzipping p7461070_R12_AIX64-5L.zip..
    unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
    unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
    Executing the merge of the patch drivers
    -- Processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
    -- Done processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
    -- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
    -- Processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
    -- Done processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
    -- Processing patch: /fmstop/patches/R1211AD/merge/9477107
    -- Processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
    -- Done processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
    -- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
    Copying files...
    5% complete. Copied 45 files of 883...
    10% complete. Copied 89 files of 883...
    15% complete. Copied 133 files of 883...
    20% complete. Copied 177 files of 883...
    25% complete. Copied 221 files of 883...
    30% complete. Copied 265 files of 883...
    35% complete. Copied 310 files of 883...
    40% complete. Copied 354 files of 883...
    45% complete. Copied 398 files of 883...
    50% complete. Copied 442 files of 883...
    55% complete. Copied 486 files of 883...
    60% complete. Copied 530 files of 883...
    65% complete. Copied 574 files of 883...
    70% complete. Copied 619 files of 883...
    75% complete. Copied 663 files of 883...
    80% complete. Copied 707 files of 883...
    85% complete. Copied 751 files of 883...
    90% complete. Copied 795 files of 883...
    95% complete. Copied 839 files of 883...
    100% complete. Copied 883 files of 883...
    Character-set converting files...
      3 unified drivers merged.
    Patch merge completed successfully
    Please check the log file at ./admrgpch.log.

  • 'not compatible with your current codelines' and 'Patch 7461070'

    We are trying to upgrade EBS from 11.5.10.2 to R12.1.1 using Maintenance Wizard v2.15, and we are on "Apply Preinstall Patches" for "Perform the Upgrade". We got some strange errors:
    (1). AutoPatch error for "Task: Apply Preinstall Patches":
    This patch is not compatible with your current codelines.
    This patch is compatible with: entity 'xla' - codeline 'R12.XLA.A'.
    Your current on-site codeline for the entity 'xla' is: 'R12.XLA.B'.
    for "1-Apply patch 6832389 (Required)", "2-Apply patch 6625757 (Required)", "3-Apply patch 6648785 (Required)", "4-Apply patch 6166150 (Required)", "5-Apply patch 6146757 (Required)", "6-Apply patch 6757123 (Required)", "7-Apply patch 6172183 (Required)", "8-Apply patch 6774040 (Required)", "9-Apply patches 6976563 and 7351384 (Conditionally Required)"
    (2). Got patch version mismatch errors when applying patch#7461070 for "10-Apply AD 12.1.1 upgrade driver (Required)":
    ###############################################################################SUMMARY - patchit12.sh - of patch: 7461070, driver: driver=u7461070.drv###############################################################################patchit12.sh - is exiting with no actions. ie. Patch 7461070 not applied.There is a mismatch between the patch version specified and the releaseversion obtained from your Applications environment. In order to applyRelease 12 patches to previous Applications versions, the patch must be applied in preinstall mode.This can be done by passing the appropriate value to the preinstall parameter of eof_patch12.sh.INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
    For first issue:
    Verified first 2 patches:
    Patch 6832389:R12.AP.A R12: Critical Pre-upgrade for R12
    Patch 6625757 6625757:R12.XLA.A
    These patches are for 12.0 upgrade, not for 12.1
    Why MW is trying to apply these R12.0 patches?
    For second issue I found Note 779466.1 Patch 6604842 fails during a R12 Upgrade via Maintenance
    Wizard as DB still reports R11i
    similar but at 12.0 level.
    Shoul all customers follow the workaround and manually apply the patch?

    I got similar error:
    ACTION: execute on node: apps, patch=7461070, driver=u7461070.drv
    patchit12.sh REMOTE SIZE: 53273 LOCAL SIZE: 53273
    OK - no update needed for patchit12.sh, same size as on EOF: 53273 bytes.
    Found release REL=11.5.10.2 from fnd_product_groups.
    WARNING - patchit12.sh has been invoked on a non-R12 Applications system.
    SUMMARY - patchit12.sh - of patch: 7461070, driver: driver=u7461070.drv
    patchit12.sh - is exiting with no actions. ie. Patch 7461070 not applied.
    There is a mismatch between the patch version specified and the release
    version obtained from your Applications environment. In order to apply
    Release 12 patches to previous Applications versions, the patch must be
    applied in preinstall mode.This can be done by passing the appropriate
    value to the preinstall parameter of eof_patch12.sh.
    INFO: Not starting patch alert monitor, to start: Login Engineer, User Admin, Update Profile
    Should patch 7461070 be applied manually?

  • How to find out the IPS and DS Service Pack and patch levels in windows server.

    Hi,
    I have installed the Information Platform Services 4.0 and Data services 4.0 in windows QA system, now we need to install the same version of IPS & DS  in windows PRD system for this how could we find out the exact version of IPS & DS  ( Service pack and patch levels ) and where we can find the same.
    Many Thanks,
    Sudheer

    Hi Sudheer,
    On a Windows Operating Systems you can check the “Programs and Features” in control panel.You can see a list of both the Name and Version number of SAP BusinessObjects that is installed.
    option 2:
    Open CMC go to Settings. In the properties, you will find the Product Version.
    Please check below SAP notes for more information.
    http://service.sap.com/sap/support/notes/1602088
    Regards,
    Pavan

  • How to know the list of patches applied to iAS Oracle home and 8.0.6 Home

    Hi,
    Please help me for the steps to know the list of patches applied to iAS Oracle home
    and 8.0.6 Home;
    as we can use ad_bugs, ad_applied_patches, OAM Applied Patches for Oracle Applications Patches list
    and we can use opatch lsinventory for Oracle Database patches applied list

    Thanks for sharing the answer. BTW, there are some exceptions like, determining Developer 6i patchset applied, and Oracle 9iAS version:
    How to find the developer version
    Re: how to find the developer version
    Note: 186981.1 - Oracle Application Server with Oracle E-Business Suite Release 11i FAQ
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=186981.1

  • Difference between service pack and Patch in XI

    What is the difference between Service Pack(SP) AND Patch ??
    e.g SP12, Patch8.
    Is it like that when there is a major change they will issue SP and
    for a small change they will issue patch ?? or after number of patches
    they will issue SP combining all the patches ??
    Service Pack level can be seen from SAP gui system..>status.
    But Patch level where can we see ?? what is the Tcode for that ?? or just we got
    to go through below links ??
    http://<host>:<j2ee_http_port>/sap/monitoring/ComponentInfo
    also
    http://<host>:<j2ee_http_port>/sap/monitoring/SystemInfo for core system info (J2EE or JVM patch level, etc.)
    thanks
    kumar

    Hello,
    A service pack (in short SP) is a collection of updates, fixes and/or enhancements to a software program delivered in the form of a single installable package. Service packs are usually numbered, and thus shortly referred to as SP1, SP2, etc. It is notable that they may bring, besides bug fixes, entirely new features
    A patch (sometimes called a "fix") is a quick-repair job for a piece of programming. During a software product's beta test distribution or try-out period and later after the product is formally released, problems (called bug) will almost invariably be found. A patch is the immediate solution that is provided to users; it can sometimes be downloaded from the software maker's Web site. The patch is not necessarily the best solution for the problem and the product developers often find a better solution to provide when they package the product for its next release.

  • Update and Patch download errors (CC 2014)

    Hi all, this was initially meant to be a customer support chat, but it seems to be unavailable currently, so I'll ask on here instead.
    The issue is happening on Creative Cloud (1.7.1.418)
    I am running Mac OSX Mavericks (version 10.9.4), early 2011 model, 2GHz Intel Core i7 Processor, 4 GB 1333 MHz DDR3 Memory
    The Creative Cloud app is showing 6 updates. The updates are as follows...
    Premier Pro CC (2014) : Adobe Premier Pro CC 2014.0.1 Update
    Photoshop CC (2014) : Photoshop Camera Raw 8.5 (CC)
    InDesign CC (2014) : DPS Desktop Tools CC2014 31.0.1 Update
    Flash Professional CC and Mobile Device Packaging (2014) : Flash Professional CC Update - July 2014, as well as Photoshop Camera Raw 8.5(CC)
    Media Encoder CC (2014) : Adobe Media Encoder CC (2014.0.1)
    After Effects CC (2014) : Photoshop Camera Raw 8.5(CC)
    When I click the update button on any of these updates, I almost instantly receive an 'Update Failed' message.
    Upon clicking the 'Learn More' option, it reads 'Update Failed - Download Error. Press Retry to try again or contact customer support.(49).
    When Retrying, the same happens every time.
    It also affects newly installed apps. This morning when installing Bridge CC, the app itself downloaded fine, but an error message saying 'Instillation Succeeded, but a patch failed - Download Error. Press Retry to try again or contact customer support.(49).' appeared.
    It has been doing this for a fair few months now, having hoped upgrading from the CC apps to the new CC 2014 apps would fix it.. These updates themselves are also quite sporadic in their appearance. When I shut down my Mac and restart it, the updates often disappear, with an 'all apps are up to date' message in their place. They only then reappear when downloading a new app, or a more up-to-date update becomes available.
    I have tried uninstalling and reinstalling the apps multiple times, but nothing changes. In the past, I have tried manually downloading and installing the updates and patches through the website, though that too gave me an error message. I have switched off my firewall on occasion, as well as allowed all Adobe apps to be allowed through, though this does not seem to have any effect. I have tried it in multiple locations, being connected to multiple routers, so I do not believe it is a router issue. I am a student, so not connected to any companies that may be blocking access. I have also had a brief look at install logs in the past, though I am not particularly tech savvy when It comes to that sort of thing. I have also seen people recommend trying to update in root user mode, though I am not particularly comfortable with that, as I have been told It's not a good idea to mess about as a root user when you don't really know what you're doing
    Any help would be greatly appreciated
    Cheers
    James

    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Installation and deployment of operating system, applications and patches in Unix environment

    Is it possible to use Configuration Manager 2012 (or 2012 R2) to perform remote installation of operating system, applications and patching in a Unix environment?
    Balaji Kundalam

    ConfigMgr does not support Operating System Deployment for non-Windows OS flavors.
    You can use the ConfigMgr client on a Unix device to install applications and to instruct the device to install patches. Basically, the client will download files and run a script against them.  If there is a patch manager in your flavor of *nix, you
    can run a script to install the patches.
    See the supported operating systems here:
    http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigLnUClientReq
    I hope that helps,
    Nash
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you've found a bug or want the product worked differently,
    share your feedback.
    <-- If this post was helpful, please click "Vote as Helpful".

  • Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches

    Once I connected my new server to my farm's config db, it returned all of the following missing locally. I stripped out any redundancies and Headings, and I'm left with 43. I'm looking for a efficient strategy. Should I start with the lowest version number
    and work my way up? Current DB version is 14.0.7015.1000. IIRC, SP2 is cumulative, so can I ignore the first two (SP1 and Hotfix), install SP2, and then the Language packs and etc on top?
    Sorted by version:
    Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000)
    Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
    Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition (14.0.7015.1000)
    Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition (14.0.7015.1000)
    Microsoft Office Server Proof (English) 2010 (14.0.7015.1000)
    Microsoft Office Server Proof (French) 2010 (14.0.7015.1000)
    Microsoft Office Server Proof (Russian) 2010 (14.0.7015.1000)
    Microsoft Office Server Proof (Spanish) 2010 (14.0.7015.1000)
    Microsoft SharePoint Portal (14.0.7015.1000)
    Microsoft User Profiles (14.0.7015.1000)
    Microsoft SharePoint Portal English Language Pack (14.0.7015.1000)
    Microsoft Shared Components (14.0.7015.1000)
    Microsoft Shared Coms English Language Pack (14.0.7015.1000)
    Microsoft Slide Library (14.0.7015.1000)
    Microsoft InfoPath Forms Services (14.0.7015.1000)
    Microsoft InfoPath Form Services English Language Pack (14.0.7015.1000)
    Microsoft Word Server (14.0.7015.1000)
    Microsoft Word Server English Language Pack (14.0.7015.1000)
    PerformancePoint Services for SharePoint (14.0.7015.1000)
    PerformancePoint Services in SharePoint 1033 Language Pack (14.0.7015.1000)
    Microsoft Visio Services English Language Pack (14.0.7015.1000)
    Microsoft Visio Services Web Front End Components (14.0.7015.1000)
    Microsoft Excel Services Components (14.0.7015.1000)
    Microsoft Document Lifecycle Components (14.0.7015.1000)
    Microsoft Excel Services English Language Pack (14.0.7015.1000)
    Microsoft Search Server 2010 Core (14.0.7015.1000)
    Microsoft Search Server 2010 English Language Pack (14.0.7015.1000)
    Microsoft Document Lifecycle Components English Language Pack (14.0.7015.1000)
    Microsoft Slide Library English Language Pack (14.0.7015.1000)
    Microsoft SharePoint Server 2010 (14.0.7015.1000)
    Microsoft Access Services Server (14.0.7015.1000)
    Microsoft Access Services English Language Pack (14.0.7015.1000)
    Microsoft Web Analytics Web Front End Components (14.0.7015.1000)
    Microsoft Web Analytics English Language Pack (14.0.7015.1000)
    Microsoft Excel Mobile Viewer Components (14.0.7015.1000)
    Recommendations?
    Thanks,
    Scott

    Thanks guys. I was able to get through all of the patches except for
    Language Pack for SharePoint, Project Server and Office Web Apps 2010 - English   missing locally
    Language Pack for SharePoint, Project Server and Office Web Apps 2010 -
    Spanish/Español missing locally
    This was my process:
    Config Wizard:
    Adding Index server to existing farm, "Server Farm Product and Patch Status" returned 34 Missing Locally required products and patches.
    SKIP installing the following two, as SP2 is cumulative
    Microsoft SharePoint 2010 Service Pack 1 (SP1) (14.0.6029.1000) (officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe)
    Hotfix for Microsoft SharePoint Server 2010 (KB2775353) 64-Bit Edition (14.0.6105.5000)
    install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe
    install oslpksp2010-kb2687462-fullfile-x64-en-us.exe
    Got "There are no products affected by this package installed on this system."
    SO!
    Uninstalled Sharepoint 2010 Server
    WIll try to install again, without skipping #2, and reorder installation of oslpksp2010-kb2687462-fullfile-x64-en-us.exe
    Retry (the long way):
    Run SharePointServer.exe, get Missing Locally...
    Install oslpksp2010-kb2687462-fullfile-x64-en-us.exe SUCCESSFUL
    Install officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe SUCCESSFUL
    Reboot
    Install oserversp2010-kb2687453-fullfile-x64-en-us.exe SUCCESSFUL
    Rerun Config
    STILL MISSING
    Download oslpksp2010-kb2687462-fullfile-x64-es-es.exe, run, "there are no products affected..."
    Uninstall.
    Re-retried, only got through the first couple:
    Run SharePointServer.exe, get Missing Locally...
    Install SP1 officeserver2010sp1-kb2460045-x64-fullfile-en-us.exe, SUCCESSFUL
    Install English Lang Pack oslpksp2010-kb2687462-fullfile-x64-en-us.exe, "There are no products affected by this package installed on this system."
    Install Spanish Lang Pack oslpksp2010-kb2687462-fullfile-x64-es-es.exe,
    Install SP2 oserversp2010-kb2687453-fullfile-x64-en-us.exe, run Config Wizard
    I'm now downloading 462150_intl_x64_zip.exe, going to try and install it as step three.
    Any suggestions greatly appreciated.
    Thanks,
    Scott

  • Upgrade Oracle Patch 10.2.0.4.0 and Instant Client instantclient_10204_V1

    Presently we have Oracle Database Release 10.2.0.2.0 and Instant Client is instantclient_10202.
    We would like to upgrade Oracle Patch 10.2.0.4.0 and Instant Client instantclient_10204_V1.
    I would like to know your suggestion, prequations to be taken and feedback.

    > I would like to know your suggestion, prequations to be taken and feedback.
    - take a backup (database + binaries)
    - install the patchset 10.2.0.4 according to the README
    - install all interim patches (see below)
    - read the following notes:
    871735 - Current patch set for Oracle 10.2.0
    1137346 - Oracle Database 10g: Patches for Release 10.2.0.4
    830576 - Parameter recommendations for Oracle 10g
    Markus

  • New patch releases: JE 5.0.48 and 4.1.20

    All,
    Please note that new patch releases for JE 5.0 and 4.1 are now available.
    The JE 5.0.48 update contains a number of critical bug fixes that can cause corruption (data loss) under certain circumstances. We strongly recommend that anyone using JE 5 upgrade immediately to 5.0.48. This update also contains fixes for issues that prevent upgrading to JE 5 from an earlier release, or cause problems after upgrading.
    Note that running the pre-upgrade utility is mandatory before upgrading to JE 5 from an earlier release, and the pre-upgrade utility must be run using JE 4.0.20. The JE 4.0.20 update contains fixes to the pre-upgrade utility as well as one critical bug fix. See the first section in the JE 5.0.48 change log for detailed information on upgrading and running the pre-upgrade utility.
    We'd like to thank all the users who reported problems and especially those who worked with us over email, in some cases for long periods of time, to diagnose problems and test fixes. Some, but not all, of those who helped are mentioned in the change log. Thank you for contributing to the reliability of the product!
    Complete information can be found in the JE documentation. The release is available via the download site or Maven.
    --mark                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Hi,
    the biggest problem is that we are using bought application not made in our company. I have tried out this java application with JRE 1.4 and 1.5 and it just doesn't work. So the only solution is using JRE 1.3 on all intranet computers. This application uses digital certificate so why doesn't Sun allow digital signet java programs to run on older versions of JRE?
    There could also be one more solution. I exactly know md5sum (or sha1sum) of 3 JAR files used by applet needing JRE 1.3. So if this sum would be enabled manualy (or I could send batch file to make this in registry or any other storage this would be good).
    http://en.wikipedia.org/wiki/Md5sum
    http://en.wikipedia.org/wiki/Sha1sum
    Thanks,
    Grofaty

  • Best Practice: SAPGUI Version and Patch Upgrades

    Hello -
    Does anyone have some thoughts/information on best practices relating to SAPGUI version and patch upgrades.
    Obviously, sometimes upgrades are forced upon us (e.g. 7.10 for Vista) and in other cases it may just be considered "nice to have".
    Either way - it always signifies regression test and deployment effort.  How do we balance the benefit and cost?
    Thanks, Steve

    Hi Steve,
    you're right for the first part, yes, we (usually) patch twice a year.
    Now for the rest
    An uninstall will only happen on release changes (6.20->6.40->7.10), i. e. about every 4-5 years as SAP releases them.
    Patches are applied to the installation server and the setup on the client will only update changed program parts. For example, upgrading 6.40->7.10 took about 10 minutes (incl. uninstall), applying patch 1 less than 5 minutes.
    I recommend, you read the "SAP Frontend Installation Guide - 7.10" which you find at SMP alias sapgui. Navigate to  Media Library - Literature. It explains setup of the installation server (sounds like a big thing, but ain't much more than creating a share), creating packages, applying updates etc.
    Peter
    Points always appreciated

Maybe you are looking for