Patch 137274-01 will not install

Recommended Solaris 10 patch 137274-01 will not install using either updatemanager or patch by itself. It failed on two V210 hosts (01/2006) and on one V480 host (08/2007). patchadd was run and it said:
ERROR: attribute verification of </etc/mnttab> failed
unable to fix attributes
Installation of <SUNWcsr> partially failed
When it is run using "smpatch" or "updatemanager", it also leaves a log message failure under "/var/tmp".
The patch worked on an Ultra-80 running (06/2006) however. It also worked on a Sun Blade 100 probably running (06/2006).

The permissions of the file "/etc/mnttab" are "-r--r--r--". For the two Solaris 10 machines that worked, the ownership was "root:root". For the three machines where the patch 137274-01 failed, the ownership was "root:other".
I tried to change the group ownership for "/etc/mnttab" to have group "root". I got a complaint that the operation was not applicable. These memory based files are unique.
Let me know if you still want the full results of any files. The file under /var/tmp had information in the beginning saying that it was an attempt to install a version of the package that already existed. It still had the final error message of "attribute verification" being wrong.

Similar Messages

Patch 123910-01 will not install

Patch 123910-10 will not install on some old Ultra-10 and Ultra-80 hosts. I suspect that the sun4u architecture does not support the sun4v categories.

I will take back this statement. Patch 123910-01 does install on the SUN sun4u architectures. I apologize.
I think I confused it with download failures due to a very sluggish connections to the Sun Update Connection Center. I have noticed some very sluggish performance. Sometimes it timed out just reading the readme file.
As of 4:00pm EDT, it (web site) is working fine.

Recommended patch 120445-01 will not install with Sol. 9 (09/2005)

Patch 120445-01 will not apply to a Solaris 9 (09/2005) setup. The hardware is an Ultra-80. Although it is recommended, it fails with the "patchadd" message:
Checking installed patches...
One or more patch packages included in 120445-01 are not installed on this system.
The host was installed from scratch and the "smpatch" was run until it had no more patches to apply except this one.
For us, this patch is only an annoyance. When I cursorily read the description, I doubt that these features exists on this hardware.

I had to install the packages:
TSBWvplr.u
TSBWvplu.u
from the DVD media. I could not find these packages from the CD media that I used. I had to use another machine to extract the packages.
I saw another post where it mentioned that patch 120445-01 would not apply. I suspect that the package install of it already has this patch.

Latest patch for Fireworks CS6 will not install

Tries to install latest patch but it will not install, the application manager just hangs and crashes, on OSX 10.6.8

1) Open Control Panel and Navigate to Control Panel\Programs\Programs and Features .
Under Program and Features list, locate the option : Adobe Creative Cloud and uninstall the same.
2) Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
3) Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
4) Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
5) Click on the below link and download Creative Cloud setup file and use the same to install the Creative Cloud Desktop application.
https://creative.adobe.com/products/creative-cloud

TS4209 Wi-Fi 1.0 patch will not install on a 10.7.4 Mac OSX even though the Wi-Fi loss bug is still there

Hello all,
The Wi-Fi 1.0 patch will not install on a 10.7.4 Mac OSX even though the Wi-Fi loss bug is still there, every now and then (the iMac does not detect any wi-fi network).
Are there any other solutions regarding this issue ?
kind regards

I figured out the problem.
This is going to sound a little crazy, but I've spent a lot of time on this one.
There's some kind of incompatibility with Lion and Seagate ST31000340AS drives. I was trying to install Lion on these drives and it would consistently fail. I've also tried to use these drives in a RAID volume. No go. I tried three different drives of this model. All of them failed.
I tried to install Lion on a Seagate ST31000528AS and it worked first time and sings beautifully.

The new ACR 5.5 update will not install in Elements 7.0

Hello All:
This situation is now becoming ridiculous (well, for me that is). I just tried to install the new ACR 5.5 update and it is "unable to install" into Elements 7.0. I downloaded the update several times, unzipped the install file, but when trying to install, it just gives me a message that it is unable to install and to hit the "quit" button.
I have a Vista 64 Bit system with 12 Gigs of RAM. I've installed Elements 7.0 and Lightroom 2.5 on my system - all with no problems. For some reason, I could never get Photoshop CS-4 to install at all and I've been through the mill trying to install Photoshop - but nothing worked and had to eventually give up. Trying to get Adobe support for CS installation on my 64 Bit system has been ridiculous in this regard as each and every time I called, I was connected with some techrep located in India who all they did was "parrot" back what I told them - how frustrating. But as I mentioned, Elements 7.0 and Lightroom installed just fine.
The previous ACR 5.4 installed just fine into Elements, but now...ACR 5.5 will not install. It tells me that I do NOT have CS-4 installed so it cannot install. What's up with that? Has Adobe stopped supporting the latest ACR upgrades for Elements? What gives?
Does anybody just have just the newest ACR 5.5 plug-in by itself that they can send me so I can just put it in my plug-ins folder (or a place where I can download it)? Adobe used to just have the plug-in that you could unzip and copy and paste and put it into your plug-in folders - but not anymore. Now they make it an 82 Meg install program and thus some of my problems.
Can anybody help here? Why does the install program look for CS-4, yet overlook Elements 7.0 completely. Helpppppppppp.
Ben

Hi Benherrmann,
Sorry to listen that you havent been able to install the Camera Raw 5.5 plugin.
But as far as my knowledge goes for PSE, PSE never lists Camera Raw plugin for updates in the Updater Preferences dialog i.e., if you will launch Help->Check for updates, a updater window will open. If you will check the preferences of that updater dialog, it will tell you that it never checks for updates for Camera Raw plugin unlike what happens in Mac. In Mac Camera Raw updates does get installs just by installing PSE(v6 of course as there is no PSE7 for Mac. Hopefully there will be a v8 for Mac by the end of october as seen in the last release).
Dont know exact reason why Adobe had configured it in that way? why there is some difference between Win and Mac.
So it prompts me that somehow you need to install Ps CS4 on the machine to get the patch installation through updater. Although this is not Ps forum, would you mind telling what error/issues are you facing while installing Ps CS4?
Regards,
Ankush

T42 - ThinkPad Hotkey Feature Integration Ver. 3.84.1500.0 will not install

I have a T42 - 2373-TG7 and run the ThinkVatage system update ver. 5 program on a regular base. At the moment it will not install the latest Hotkey Feature ver. 3.84.1500.0.
During the istall I'm getting the Notice: "This proram does not support this system".
Than the system update program tells me to istall the Feature manually. When I do that I get the same message.
When I look to the C:\DRIVERS\HOTKEY directory it seems like that the data are there. When I execute the setup.exe program in this directory I get again the same notice "This proram does not support this system".
Any help is apreciated.
Regards, viathinkpad.

I think it must be a bug.
please look this SWI.XML setup config
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<?tpi version="0290" ?>
<build id="8JVU31WW" keyname="HOTKEYPACK3">
<title><gd path="/build/data/resolve[@method=LANGUAGE]"></gd></title>
<version>3.84.1500</version>
<os id="9X"></os>
<os id="NT">[XP,]</os>
<data>
    <resolve method="LANGUAGE" default="0009">
      <item id="0009"><data>ThinkPad Hotkey Features Integration Setup</data></item>
      <item id="0011"><data>ThinkPad　ホットキー機能統合　セットアップ</data></item>
    </resolve>
</data>
<tpi id="HOTKEY">
    <xrelease order="XP_THINKSL LH_THINKSL W8_THINKSL XP_THINK LH_THINK W8_THINK" cpu="X86 AMD64">
      <release id="XP_THINKSL">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]">NAME</gd></title>
        <version><gd tpipath="data/resolve[@method=LANGUAGE]">VERSION</gd></version>
        <lastversion id="CRITICAL"></lastversion>
        <setup><gd tpipath="data/resolve[@method=BIOSID]">SETUP.XP</gd></setup>
        <uninstall>@REG\OnScreenDisplay</uninstall>
        <os id="9X"></os>
        <os id="NT">[XP,WS]</os>
        <dependency id="BRANDID">0x0112</dependency>
      </release>
      <release id="LH_THINKSL">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]">NAME</gd></title>
        <version><gd tpipath="data/resolve[@method=LANGUAGE]">VERSION</gd></version>
        <lastversion id="CRITICAL"></lastversion>
        <setup><gd tpipath="data/resolve[@method=BIOSID]">SETUP.LH</gd></setup>
        <uninstall Wow6432Node="no">@REG\OnScreenDisplay</uninstall>
        <os id="9X"></os>
        <os id="NT">[LH,W7]</os>
        <dependency id="BRANDID">0x0112</dependency>
      </release>
      <release id="W8_THINKSL">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]">NAME</gd></title>
        <version><gd tpipath="data/resolve[@method=LANGUAGE]">VERSION</gd></version>
        <lastversion id="CRITICAL"></lastversion>
        <setup><gd tpipath="data/resolve[@method=BIOSID]">SETUP.W8</gd></setup>
        <uninstall Wow6432Node="no">@REG\OnScreenDisplay</uninstall>
        <os id="9X"></os>
        <os id="NT">[W8,]</os>
        <dependency id="BRANDID">0x0112</dependency>
      </release>
      <release id="XP_THINK">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]">NAME</gd></title>
        <version><gd tpipath="data/resolve[@method=LANGUAGE]">VERSION</gd></version>
        <lastversion id="CRITICAL"></lastversion>
        <setup>\OSD\tphk_tp.inf, DefaultInstall.XP</setup>
        <uninstall>@REG\OnScreenDisplay</uninstall>
        <os id="9X"></os>
        <os id="NT">[XP,WS]</os>
      </release>
      <release id="LH_THINK">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]">NAME</gd></title>
        <version><gd tpipath="data/resolve[@method=LANGUAGE]">VERSION</gd></version>
        <lastversion id="CRITICAL"></lastversion>
        <setup>\OSD\tphk_tp.inf, DefaultInstall.LH</setup>
        <uninstall Wow6432Node="no">@REG\OnScreenDisplay</uninstall>
        <os id="9X"></os>
        <os id="NT">[LH,W7]</os>
      </release>
      <release id="W8_THINK">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]">NAME</gd></title>
        <version><gd tpipath="data/resolve[@method=LANGUAGE]">VERSION</gd></version>
        <lastversion id="CRITICAL"></lastversion>
        <setup>\OSD\tphk_tp.inf, DefaultInstall.W8</setup>
        <uninstall Wow6432Node="no">@REG\OnScreenDisplay</uninstall>
        <os id="9X"></os>
        <os id="NT">[W8,]</os>
      </release>
    </xrelease>
    <data>
      <resolve method="LANGUAGE" default="0009">
        <item id="0009">
          <data id="VERSION">6.67.05</data>
          <data id="NAME">On Screen Display</data>
        </item>
        <item id="0011"><data id="NAME">オンスクリーン表示</data></item>
        <item id="0006"><data id="NAME">Vis på skærm</data></item>
        <item id="000B"><data id="NAME">Kuvaruututeksti</data></item>
        <item id="000C"><data id="NAME">Incrustation</data></item>
        <item id="0007"><data id="NAME">Anzeige am Bildschirm</data></item>
        <item id="0010"><data id="NAME">Display su Schermo</data></item>
        <item id="0013"><data id="NAME">Weergave op scherm</data></item>
        <item id="0014"><data id="NAME">Visning på skjermen</data></item>
        <item id="000A"><data id="NAME">En pantalla</data></item>
        <item id="001D"><data id="NAME">Visa på skärmen</data></item>
        <item id="0404"><data id="NAME">On Screen Display</data></item>
        <item id="0804"><data id="NAME">On Screen Display</data></item>
        <item id="0012"><data id="NAME">On Screen Display</data></item>
      </resolve>
      <resolve method="BIOSID" default="*">
        <item id="*">
          <data id="SETUP.XP">\OSD\tphk_tp.inf, DefaultInstall.XP</data>
          <data id="SETUP.LH">\OSD\tphk_tp.inf, DefaultInstall.LH</data>
          <data id="SETUP.W8">\OSD\tphk_tp.inf, DefaultInstall.W8</data>
        </item>
        <item id="6A">
          <data id="SETUP.XP">\OSD\tphk_sl.inf, DefaultInstall.XP</data>
          <data id="SETUP.LH">\OSD\tphk_sl.inf, DefaultInstall.LH</data>
          <data id="SETUP.W8">\OSD\tphk_sl.inf, DefaultInstall.W8</data>
        </item>
        <item id="6B">
          <data id="SETUP.XP">\OSD\tphk_sl.inf, DefaultInstall.XP</data>
          <data id="SETUP.LH">\OSD\tphk_sl.inf, DefaultInstall.LH</data>
          <data id="SETUP.W8">\OSD\tphk_sl.inf, DefaultInstall.W8</data>
        </item>
      </resolve>
    </data>
</tpi>
<tpi id="HOTKEY_1">
    <xrelease order="THINKLEGACY THINKUEFI THINKSL THINKMINI" cpu="X86 AMD64">
      <release id="THINKLEGACY">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]">NAME</gd></title>
        <version>2.40</version>
        <lastversion id="CRITICAL" />
        <setup>\ZOOM\TpScrex.inf, DefaultInstall</setup>
        <uninstall Wow6432Node="no">@REG\ThinkPad FullScreen Magnifier</uninstall>
        <os id="9X"></os>
        <os id="NT">[XP,W7]</os>
        <device><![CDATA[\ACPI\IBM0068]]></device>
        <dependency id="TPI">HOTKEY</dependency>
        <dependency id="BRANDID">0x0012</dependency>
      </release>
      <release id="THINKUEFI">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]">NAME</gd></title>
        <version>2.40</version>
        <lastversion id="CRITICAL" />
        <setup><gd tpipath="data/resolve[@method=BIOSID]">SETUP</gd></setup>
        <uninstall Wow6432Node="no">@REG\ThinkPad FullScreen Magnifier</uninstall>
        <os id="9X"></os>
        <os id="NT">[XP,W7]</os>
        <device><![CDATA[\ACPI\LEN0068]]></device>
        <dependency id="TPI">HOTKEY</dependency>
        <dependency id="BRANDID">0x0012</dependency>
      </release>
      <release id="THINKSL">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]">NAME</gd></title>
        <version>2.40</version>
        <lastversion id="CRITICAL" />
        <setup>\ZOOM\TpScrex.inf, DefaultInstall</setup>
        <uninstall Wow6432Node="no">@REG\ThinkPad FullScreen Magnifier</uninstall>
        <os id="9X"></os>
        <os id="NT">[XP,W7]</os>
        <dependency id="TPI">HOTKEY</dependency>
        <dependency id="BRANDID">0x0112</dependency>
      </release>
      <release id="THINKMINI">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]">NAME</gd></title>
        <version>2.40</version>
        <lastversion id="CRITICAL" />
        <setup>\ZOOM\TpScrex.inf, DefaultInstall</setup>
        <uninstall Wow6432Node="no">@REG\ThinkPad FullScreen Magnifier</uninstall>
        <os id="9X"></os>
        <os id="NT">[XP,W7]</os>
        <dependency id="TPI">HOTKEY</dependency>
        <dependency id="BRANDID">0x0212</dependency>
      </release>
    </xrelease>
    <data>
      <resolve method="LANGUAGE" default="0009">
        <item id="0009"><data id="NAME">ThinkPad FullScreen Magnifier</data></item>
        <item id="0011"><data id="NAME">ThinkPad 全画面拡大機能</data></item>
        <item id="0006"><data id="NAME">ThinkPad FullScreen Magnifier</data></item>
        <item id="000B"><data id="NAME">ThinkPad FullScreen Magnifier -ohjelma</data></item>
        <item id="000C"><data id="NAME">Loupe ThinkPad</data></item>
        <item id="0007"><data id="NAME">ThinkPad-Funktion "FullScreen Magnifier"</data></item>
        <item id="0010"><data id="NAME">ThinkPad FullScreen Magnifier</data></item>
        <item id="0013"><data id="NAME">ThinkPad FullScreen Magnifier</data></item>
        <item id="0014"><data id="NAME">ThinkPad FullScreen Magnifier</data></item>
        <item id="000A"><data id="NAME">Ampliación a pantalla completa de ThinkPad</data></item>
        <item id="001D"><data id="NAME">ThinkPad FullScreen Magnifier</data></item>
      </resolve>
      <resolve method="BIOSID" default="*">
        <item id="*">
          <data id="SETUP"></data>
        </item>
        <item id="83">
          <data id="SETUP">\ZOOM\TpScrex.inf, DefaultInstall</data>
        </item>
        <item id="89">
          <data id="SETUP">\ZOOM\TpScrex.inf, DefaultInstall</data>
        </item>
        <item id="8A">
          <data id="SETUP">\ZOOM\TpScrex.inf, DefaultInstall</data>
        </item>
        <item id="8B">
          <data id="SETUP">\ZOOM\TpScrex.inf, DefaultInstall</data>
        </item>
        <item id="8C">
          <data id="SETUP">\ZOOM\TpScrex.inf, DefaultInstall</data>
        </item>
        <item id="8D">
          <data id="SETUP">\ZOOM\TpScrex.inf, DefaultInstall</data>
        </item>
        <item id="8F">
          <data id="SETUP">\ZOOM\TpScrex.inf, DefaultInstall</data>
        </item>
        <item id="8G">
          <data id="SETUP">\ZOOM\TpScrex.inf, DefaultInstall</data>
        </item>
      </resolve>
    </data>
</tpi>
<tpi id="DISPLAY">
    <xrelease order="THINK" cpu="X86 AMD64">
      <release id="THINK">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]">NAME</gd></title>
        <version>1.00.02</version>
        <lastversion id="CRITICAL" />
        <setup><gd tpipath="data/resolve[@method=BIOSID]">SETUP</gd></setup>
        <uninstall Wow6432Node="no">@REG\ThinkPadDisplayUtility</uninstall>
        <os id="9X"></os>
        <os id="NT">[XP,W7]</os>
      </release>
    </xrelease>
    <data>
      <resolve method="BIOSID" default="*">
        <item id="*">
        </item>
        <item id="6K">
          <data id="SETUP">\DISPUTIL\tpdu_tp.inf, DefaultInstall</data>
        </item>
      </resolve>
      <resolve method="LANGUAGE" default="0009">
        <item id="0009"><data id="NAME">ThinkPad Display Utilities</data></item>
      </resolve>
    </data>
</tpi>
<tpi id="SMIIF">
    <xrelease order="RELEASE" cpu="X86 AMD64">
      <release id="RELEASE">
        <title><gd tpipath="data/resolve[@method=LANGUAGE]"></gd></title>
        <version>1.05</version>
        <lastversion id="CRITICAL"></lastversion>
        <setup>\smiif\lnvsmi.inf, DefaultInstall</setup>
        <uninstall Wow6432Node="no">@REG\LENOVO.SMIIF</uninstall>
        <os id="9X"></os>
        <os id="NT">[XP,W7]</os>
      </release>
    </xrelease>
    <data>
      <resolve method="LANGUAGE" default="0009">
        <item id="0009"><data>Lenovo System Interface Driver</data></item>
        <item id="0011"><data>Lenovo システム制御ドライバ</data></item>
      </resolve>
    </data>
</tpi>
<tpi id="LPU">
    <xrelease order="ANY" cpu="X86">
      <release id="ANY">
        <title>Lenovo Patch Utility</title>
        <version>1.3.1.1</version>
        <lastversion id="CRITICAL" />
        <setup>\LPU\lpusetup.exe {AD32F5E9-6BDD-480A-8B7B-95571D04691C}</setup>
        <uninstall Wow6432Node="no">@REG\{AD32F5E9-6BDD-480A-8B7B-95571D04691C}</uninstall>
        <os id="9X"></os>
        <os id="NT">[XP,]</os>
      </release>
    </xrelease>
    <xrelease order="ANY" cpu="AMD64">
      <release id="ANY">
        <title>Lenovo Patch Utility</title>
        <version>1.3.1.1</version>
        <lastversion id="CRITICAL" />
        <setup>\LPU\lpusetup.exe {AD32F5E9-6BDD-480A-8B7B-95571D04691C} {ABE4638D-D208-4061-9F26-E3E11E3A1E0C}</setup>
        <uninstall Wow6432Node="no">@REG\{ABE4638D-D208-4061-9F26-E3E11E3A1E0C}</uninstall>
        <os id="9X"></os>
        <os id="NT">[XP,]</os>
      </release>
    </xrelease>
</tpi>
</build>

Envy5530E will not install drivers win7

I have an ENVY 5530E that will not install the driver on a gateway computer that was upgraded to Windows 7 32bit from Vista. I have applied tha patch, but it still fails at almost the very end, then rolls back the entire installation. There are no error messages or codes displayed . Need a push in some direction.
This question was solved.
View Solution.

Hey Rwstalzer,
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing again.
Let me know.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I am trying to use an education program that needs Java applets to install and use and it will not use Safari. When I download IE from the web it will not install. How can I get a browser that will work on my MacAir for travel use of this program?

I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.

Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

ITunes will not install, I get an error message: Could not open key:HKEY_LOCAL_MACHINE_software_classes_CLSID

I tried to reinstall iTunes 10.5 on an older PC using Windows XP. iTunes will not install. Tthis is the full error message. Could not open key: HKEY_LOCAL_MACHINE\software\classes\CLSID\{063D34A4-BF84-488D-B699-E8CA04DDE}
Please Help

I was able to solve this problem using the utility explained in this post:
http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
Thanks!
Dell Windows XP

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

Quicktime will not install on my PC - also stopping iTunes from working

Quicktime and iTunes will not install on my Vista SP 1 PC, Whenever I try to install either I get the following error message;
Quicktime - "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
iTunes - "The installation of Quicktime did not complete successfully. iTunes requires Quicktime."
From my iTunes error message I hope that by correcting the Quicktime error the iTunes should in turn be fixed.
I am using the latest installers for each and I can't understand why this is happening,
I have tried completely removing my old version of Quicktime and tried to copy my other PC's Quicktime folder into this one however that has not worked. I have also tried using the latest installers multiple times however I always get the same error message.
Please help me fix this error where Quicktime can't install,
Thanks
James

Says windows install package does not operate yet I can install other programs.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

Java applet will not install in browser

My VI will not install a JAva Applet. I jsut keeps saying "Installing Java Applet" and it never prompts for an install or anything. Any ideas? Is there something extra that I need to do that I am not realizing? I attached a screenshot of the window where is says installing.
Solved!
Go to Solution.
Attachments:
Capture.PNG ‏54 KB

How are you trying to install the java applet? Through a website? Calling an installer?
Could it be that the applet already installed on the computer?
Has it ever worked?
Applications Engineer
National Instruments
CLD Certified

Patch 137274-01 will not install

Similar Messages

Maybe you are looking for