Patch 16388307 Failling For The File xla120balcp.ldt

Hi there,
Please find below error which i have found during applying "Patch 16388307: CLARIFICATION AS PER BUG 15934260 - INVOICE MATCH TO PO FAILS WHEN PROJECT IS CLO" on test instance.
FAILED: file xla120balcp.ldt on worker 1 for product xla username APPS. need help in this regards.
Application: Oracle EbsR12(12.1.2)
DB: 11.1.0.7
OS: Oracle Linux5X86*64
Regards,
Mohsin

920138 wrote:
Hi there,
Please find below error which i have found during applying "Patch 16388307: CLARIFICATION AS PER BUG 15934260 - INVOICE MATCH TO PO FAILS WHEN PROJECT IS CLO" on test instance.
FAILED: file xla120balcp.ldt on worker 1 for product xla username APPS. need help in this regards.
Application: Oracle EbsR12(12.1.2)
DB: 11.1.0.7
OS: Oracle Linux5X86*64
Regards,
MohsinPlease check the failed worker log file for details about the error.
Thanks,
Hussein

Similar Messages

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp b

When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?

Hi Berriedale,
Please try the below steps and check.
Turn off any antivirus or software security program.
Download the update patch 11.0.10 manually from the below link and run it.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
Regards,
Anand

Attachments dont download from Gmail in Safari, They disappear,I even tried re-downloading Safari and that download disappeared, it is not in my downloads folder, I actually searched in finder for the file and it is nowhere on my computer. Please help!

Attachments dont download from Gmail in Safari, They disappear,I even tried re-downloading Safari and that download disappeared, it is not in my downloads folder, I actually searched in finder for the file and it is nowhere on my computer. Please help!

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

Outlook - The path specified for the file SharePoint Lists PST is not valid

Some users are connecting via Citrix XenApp to Microsoft Server 2008 R2 and using Microsoft Office 2010 (14.0.7109.5000) SP2 MSO (14.0.7116.5000) - Microsoft Office Profressional Plus 2010 x86 version for their email. Microsoft Exchange Server 2010
SP2 for email.
They are connected to Microsoft SharePoint 2010 SP2 August 2013 CU, via a SharePoint Calender; they have View permissions to the SharePoint calendar using Classic Mode permissions (Not Claims). No permissions have / are changing on this SharePoint
Calendar. They connect to the SharePoint Calender to Outlook.
When they open up their Office Outlook client, they receive an error "Outlook Data File" "The path specified for the file \AppData\Local\Microsoft\Outlook\SharePoint Lists.pst is not valid." OK
They select OK and they get a window popping up with the option to try to find the SharePoint list. "Create/Open Outlook Data File" (File name: 'SharePoint Lists') Open Cancel. They select Cancel.
They are returned to their Outlook client "email."
As an I.T. administrator and SharePoint Administrator, I had a remote session with them, using Bomgar software and I Go to File Menu, Account Settings, SharePoint Lists Tab but there is no list there so go to the Data Files tab and see SharePoint Lists listed.
Selecting it once, and clicking on Settings... button gives error message similar to the one above about PST not valid.
STRANGE in that, when you do that! You can go to Home tab, Calendar (Ctrl+2), and see Other Calendars and now the SharePoint calendar that was supposed to be there before, but was just "empty!" There was only the Other Calendars
option but it didn't have any "sub" calendar item.
A similar issue is when Other Calendars is listed, and has a sub calendar listed, a SharePoint connected calendar. You click on it and get "Microsoft Outlook" "The set of folders cannot be opened. The path specified for the file c:\Users\USERNAMEHERE\AppData\Local\Microsoft\Outlook\SharePoint
Lists.pst is not valid." OK
Click OK and go through the above steps to get the same result. After going into Account Settings, Data Files, checking on the Settings... button, and receiving the error message, again mentioned above, and the prompt to Create/Open Outlook Data File,
thgen I can go back into Account Settings, Data Files, and double click on the SharePoint Lists and instead of an error, the Outlook Data File comes up, with Change Password... Compact Now, Comment, Name, Filename, Format (Outlook Data File) OK Cancel.
Can go back to the Calendar (Ctrl+2) and Other Calendars, and the SharePoint Calendar "Sub calendar" will appear and operate as normal! All was done was go into the Account settings and "check" on the "error."
Tried to delete the SharePoint Lists and close out and add it and then go back in, and it "worked" for a few days. I later turned on Logging and for over 24 hours it was on for the user. The user was not on forever.
In the Outlook Logging folder, from the users profile, I found many *.log files, firstrun, OPMLog, ETL files, one of which is 6MB, and some prof_001_outlook....txt files. I clickedo n the SharePoint Lists.pst.log file 1KB
It is listed here:
Store File Name: SharePoint Lists.pst
Date|Time|Action|Search Owner|NID|Change Action|Change Semantics|URL|Count Of DocIDs|Next NID Index to add to All Msg folder|Next NID Index to push to FTE|Folder Path|Folder Path ID|HRESULT|Result Status
2014/05/23|08:10:22:672|SGD_ScOpenNode(fCreate=FALSE)||||0x80040818|FAIL
2014/05/23|08:10:22:672|SGD_ScOpenNode(fCreate=TRUE)|||||OK
2014/05/23|08:10:22:673|Marking store for re-push: Newly created store|0|||||||||||OK
2014/05/23|08:10:22:673|SGO_ScMarkPushEverythingDone|0|||||||||||OK
firstrun.log
*** Starting First Run (05-23-2014 07:32:08) ***
...HrPreSplashFirstRun called.
...HrPreLogFirstRun called.
...HrPostLogFirstRun called.
...deleting WAB4/UseOutlook because we're using MAPI.
...writing UUID to HKCU.
...setting Primary Client to Outlook.
*** Ending First Run (05-23-2014 07:32:26) ***
OPMLog.log
2014.05.23 07:32:28 <<<< Logging Started (level is LTF_TRACE) >>>>
2014.05.23 07:32:28 HELPER::Initialize called
2014.05.23 07:32:28 Initializing: Finding a Transport
2014.05.23 07:32:28 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:28 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:32:28 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:32:28 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:32:28 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize called
2014.05.23 07:32:28 Initializing: Finding a Transport
2014.05.23 07:32:28 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:28 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:32:28 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:32:28 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:32:28 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:32:28 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:32:28 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:32:28 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:32:45 HELPER::Uninitialize called
2014.05.23 07:32:45 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:45 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: Shutdown, hr = 0x00000000
2014.05.23 07:32:45 HELPER::Uninitialize called
2014.05.23 07:32:45 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:32:45 MAPI XP Call: TransportNotify(END_IN|END_OUT), hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: TransportLogoff in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:32:45 MAPI XP Call: Shutdown, hr = 0x00000000
2014.05.23 07:32:45 Resource manager terminated
2014.05.23 07:34:06 <<<< Logging Started (level is LTF_TRACE) >>>>
2014.05.23 07:34:06 HELPER::Initialize called
2014.05.23 07:34:06 Initializing: Finding a Transport
2014.05.23 07:34:06 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:34:06 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:34:06 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:34:06 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:34:06 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize called
2014.05.23 07:34:06 Initializing: Finding a Transport
2014.05.23 07:34:06 MAPI XP Call: XPProviderInit in EMSMDB.DLL, hr = 0x00000000
2014.05.23 07:34:06 MAPI Status: (-- -- ---/--- -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportLogon, hr = 0x00000000
2014.05.23 07:34:06 Initializing: Found a transport, Error code = 0x00000000
2014.05.23 07:34:06 MAPI XP Call: AddressTypes, hr = 0x00000000, cAddrs = 3, cUids = 1
2014.05.23 07:34:06 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:34:06 MAPI XP Call: TransportNotify(BEGIN_IN|BEGIN_OUT), hr = 0x00000000
2014.05.23 07:34:06 HELPER::Initialize done, Error code = 0x00000000
2014.05.23 07:34:06 HELPER::GetCapabilities called, Error code = 0x00000000
2014.05.23 07:35:12 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:35:12 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:35:12 EXECUTING Put MAPI TASK
2014.05.23 07:35:13 Starting the Spooling Cycle
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:35:13 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:35:13 Sending one message
2014.05.23 07:35:13 Progress: Sending message 'RE: Good Morning!' (size 14.76 KBytes)
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:35:13 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:35:13 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:35:13 FINISHED MAPI TASK
2014.05.23 07:35:13 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:35:13 [email protected]: Synch operation completed
2014.05.23 07:35:13 Sending done, Error code = 0x00000000
2014.05.23 07:35:13 Sending done, Error code = 0x8004010f
2014.05.23 07:35:13 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:35:13 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:37:53 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:37:53 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:37:53 EXECUTING Put MAPI TASK
2014.05.23 07:37:53 Starting the Spooling Cycle
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:37:53 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:37:53 Sending one message
2014.05.23 07:37:53 Progress: Sending message 'RE: Good Morning!' (size 14.03 KBytes)
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:37:53 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:37:53 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:37:53 FINISHED MAPI TASK
2014.05.23 07:37:53 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:37:53 [email protected]: Synch operation completed
2014.05.23 07:37:53 Sending done, Error code = 0x00000000
2014.05.23 07:37:53 Sending done, Error code = 0x8004010f
2014.05.23 07:37:53 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:37:53 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:57:34 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:57:34 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:57:34 EXECUTING Put MAPI TASK
2014.05.23 07:57:34 Starting the Spooling Cycle
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:57:34 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:57:34 Sending one message
2014.05.23 07:57:34 Progress: Sending message 'TP - Hold PE Call ' (size 6.00 KBytes)
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:57:34 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:57:34 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:57:34 FINISHED MAPI TASK
2014.05.23 07:57:34 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:57:34 [email protected]: Synch operation completed
2014.05.23 07:57:34 Sending done, Error code = 0x00000000
2014.05.23 07:57:34 Sending done, Error code = 0x8004010f
2014.05.23 07:57:34 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:57:34 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 07:58:58 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 07:58:58 [email protected]: UploadItems: 1 messages to send
2014.05.23 07:58:58 EXECUTING Put MAPI TASK
2014.05.23 07:58:58 Starting the Spooling Cycle
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:58:58 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 07:58:58 Sending one message
2014.05.23 07:58:58 Progress: Sending message 'TP - Hold PE Call' (size 6.00 KBytes)
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 07:58:58 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 07:58:58 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 07:58:58 FINISHED MAPI TASK
2014.05.23 07:58:58 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 07:58:58 [email protected]: Synch operation completed
2014.05.23 07:58:58 Sending done, Error code = 0x00000000
2014.05.23 07:58:58 Sending done, Error code = 0x8004010f
2014.05.23 07:58:58 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 07:58:58 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:03:12 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 08:03:12 [email protected]: UploadItems: 1 messages to send
2014.05.23 08:03:12 EXECUTING Put MAPI TASK
2014.05.23 08:03:12 Starting the Spooling Cycle
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:12 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 08:03:12 Sending one message
2014.05.23 08:03:12 Progress: Sending message 'Accepted: TP - Hold PE Call' (size 5.70 KBytes)
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:12 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 08:03:12 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 08:03:12 FINISHED MAPI TASK
2014.05.23 08:03:12 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:03:12 [email protected]: Synch operation completed
2014.05.23 08:03:12 Sending done, Error code = 0x00000000
2014.05.23 08:03:12 Sending done, Error code = 0x8004010f
2014.05.23 08:03:12 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:03:12 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:03:16 [email protected]: Synch operation started (flags = 00000001)
2014.05.23 08:03:16 [email protected]: UploadItems: 1 messages to send
2014.05.23 08:03:16 EXECUTING Put MAPI TASK
2014.05.23 08:03:17 Starting the Spooling Cycle
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:17 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001a
2014.05.23 08:03:17 Sending one message
2014.05.23 08:03:17 Progress: Sending message 'Accepted: TP - Hold PE Call ' (size 5.70 KBytes)
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl act)
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT fl ---)
2014.05.23 08:03:17 MAPI XP Call: SubmitMessage, hr = 0x00000000
2014.05.23 08:03:17 MAPI XP Call: EndMessage, hr = 0x00000000
2014.05.23 08:03:17 FINISHED MAPI TASK
2014.05.23 08:03:17 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:03:17 [email protected]: Synch operation completed
2014.05.23 08:03:17 Sending done, Error code = 0x00000000
2014.05.23 08:03:17 Sending done, Error code = 0x8004010f
2014.05.23 08:03:17 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:03:17 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 [email protected]: Synch operation started (flags = 00000031)
2014.05.23 08:04:08 [email protected]: StartImport(flags = 00000000, max msg = ffffffff): full items
2014.05.23 08:04:08 [email protected]: UploadItems: 0 messages to send
2014.05.23 08:04:08 [email protected]: Synch operation started (flags = 00000031)
2014.05.23 08:04:08 [email protected]: StartImport(flags = 00000000, max msg = ffffffff): full items
2014.05.23 08:04:08 [email protected]: UploadItems: 0 messages to send
2014.05.23 08:04:08 Starting the Spooling Cycle
2014.05.23 08:04:08 MAPI Status: (IN fl ---/OUT -- ---)
2014.05.23 08:04:08 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c
2014.05.23 08:04:08 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 636
2014.05.23 08:04:08 Progress: Receiving message (message 1 out of 637, size unknown)
2014.05.23 08:04:08 Downloading one message
2014.05.23 08:04:08 Transport tightly coupled with store, download is NOOP
2014.05.23 08:04:08 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:08 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:08 FINISHED MAPI TASK
2014.05.23 08:04:08 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:08 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 Starting the Spooling Cycle
2014.05.23 08:04:08 MAPI Status: (IN fl ---/OUT -- ---)
2014.05.23 08:04:08 MAPI XP Call: FlushQueues, hr = 0x00000000, ulFlushFlags = 0x0000001c
2014.05.23 08:04:08 MAPI XP Call: Poll, hr = 0x00000000, cPollCount = 706
2014.05.23 08:04:08 Progress: Receiving message (message 1 out of 707, size unknown)
2014.05.23 08:04:08 Downloading one message
2014.05.23 08:04:08 Transport tightly coupled with store, download is NOOP
2014.05.23 08:04:08 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:08 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:08 FINISHED MAPI TASK
2014.05.23 08:04:08 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:08 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:08 EXECUTING EndSession MAPI TASK
2014.05.23 08:04:09 Starting the Simplified Transfer Cycle
2014.05.23 08:04:09 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 636
2014.05.23 08:04:09 Progress: Receiving message (message 1 out of 637, size unknown)
2014.05.23 08:04:09 Downloading one message
2014.05.23 08:04:09 MAPI Status: (IN -- act/OUT -- ---)
2014.05.23 08:04:09 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:09 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:09 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:09 FINISHED MAPI TASK
2014.05.23 08:04:09 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:09 [email protected]: Synch operation completed
2014.05.23 08:04:09 EXECUTING EndSession MAPI TASK
2014.05.23 08:04:09 Starting the Simplified Transfer Cycle
2014.05.23 08:04:09 MAPI XP Call: Poll, hr = 0x00000000, iMsgsReceived = 0, cPollCount = 706
2014.05.23 08:04:09 Progress: Receiving message (message 1 out of 707, size unknown)
2014.05.23 08:04:09 Downloading one message
2014.05.23 08:04:09 MAPI Status: (IN -- act/OUT -- ---)
2014.05.23 08:04:09 MAPI Status: (IN -- ---/OUT -- ---)
2014.05.23 08:04:09 Downloading done, Error code = 0x8004010f
2014.05.23 08:04:09 Finishing the Spooling Cycle, Error code = 0x00000000
2014.05.23 08:04:09 FINISHED MAPI TASK
2014.05.23 08:04:09 [email protected]: ReportStatus: RSF_COMPLETED, hr = 0x00000000
2014.05.23 08:04:09 [email protected]: Synch operation completed
They are using a CRM client 2011 (Server is CRM 2011 - on premise) as well as having other connected email accounts - managed accounts, like Accounting or HR, etc.
What can I look for / provide for you all to assist? I am almost ready to open a ticket with Microsoft to resolve this as it has been happening for multiple users for multiple weeks.
When "I" go in, logged on as myself, I do NOT have this problem, however my account is not "old" in that I just logged onto the account domain\matthew.carter, where these users use their accounts day in and day out for weeks / months
/ (some years).
Thank you!

Did you post this in the SharePoint Section? Did you find a resolution for this?
We are experiencing the same issue and have yet to find anything to resolve this issue.
Regards, Daniel
I ended up scouring his old posts looking for the other thread, and he did open one in the SharePoint forum:
https://social.technet.microsoft.com/Forums/office/en-US/3dded85b-73ee-47dc-9609-6ee65f329983/outlook-the-path-specified-for-the-file-sharepoint-lists-pst-is-not-valid?forum=sharepointadminprevious#3dded85b-73ee-47dc-9609-6ee65f329983
Unfortunately, what was marked as an "answer" by the moderators isn't really an answer at all to the problem. We are experiencing pretty much an identical issue with a calendar people are adding to Outlook 2010 from SharePoint 2010 within a XenApp
server (using roaming profiles). However, we have not had the issue occur outside of XenApp yet.

Database does not contain a URL for the file

How do I find out what file/update this is:
The file digest/hash does not exist in the SUSDB, but I have no idea looking at the windowsupdate or softwaredistribution.log what file it is referring to.
SELECT [FileDigest]
      ,[DigestAlgorithm]
      ,[AdditionalHash]
FROM [SUSDB].[dbo].[tbFileHash] fh
WHERE fh.FileDigest =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
or fh.AdditionalHash =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
0 rows found
Softwaredistribution.log
2014-10-07 23:07:04.319 UTC   Error   w3wp.5   ClientImplementation.GetExtendedUpdateInfo   System.ArgumentException: The database does not contain a URL for the file 15B82F101E79C1E2181E43CC8A3CC137CBFDC91D.
Parameter name: fileDigests
   at Microsoft.UpdateServices.Internal.DataAccess.ExecuteSpGetFileLocations(Byte[][] fileDigests)
   at Microsoft.UpdateServices.Internal.DataAccessCache.GetFileLocations(Byte[][] fileDigests, DataAccess da)
   at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
   at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
   at System.Web.Services.Protocols.WebServiceHandler.Invoke()
   at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()
   at System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context)
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
   at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
   at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
   at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
   at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)

How do I find out what file/update this is:
Hows about.. rather than chasing a rabbit down the hole doing whatever you think you're doing...
We start with this: What problem is it that you're actually trying to solve?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

How do i change the backgound color for the "file edit view history bookmark tools help" bar in Firefox 29.0

how do i change the backgound color for the "file edit view history bookmark tools help" bar in Firefox 29.0

You can add a solid color theme to change the color of the top of the browser window, which includes the Menu Bar.
https://addons.mozilla.org/en-US/firefox/themes/solid

"Message Rejection Handler" for the file/ftp adapter using fault policy

Hi guys,
We are trying to implement "Message Rejection Handler" for the file/ftp adapter using following fault policy configuration.
Fault Policy:
`````````````
<?xml version='1.0' encoding='UTF-8'?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="2.0.1" id="ProcessNameGenericPolicy"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-rethrow-fault"/>
</retry>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
<faultPolicy version="2.0.1" id="ProcessNameHumanInterventionPolicy"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults"
name="medns:mediatorFault">
<condition>
<test>contains($fault.mediatorErrorCode, "TYPE_TRANSIENT")</test>
<action ref="ora-retry-with-intervention"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry-with-intervention"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>

</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry-with-intervention">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-human-intervention"/>
</retry>
</Action>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-rethrow-fault"/>
</retry>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
<faultPolicy version="2.0.1" id="RejectedMessages">
<Conditions> 
<faultName xmlns:rjm="http://schemas.oracle.com/sca/rejectedmessages" name="rjm:PartnerLinkName">

<condition>
<action ref="writeToFile"/> 
</condition>
</faultName>
</Conditions>
<Actions> 
<Action id="writeToFile">
<fileAction>
<location>Server/Loc/path</location>
<fileName>Rejected_AJBFile_%ID%_%TIMESTAMP%.xml</fileName>
</fileAction>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
Fault Binding:
``````````````
<?xml version='1.0' encoding='UTF-8'?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<composite faultPolicy="ProcessNameGenericPolicy"/>
<service faultPolicy="RejectedMessages">
<name>PartnerLinkName</name>
</service>
<reference faultPolicy="RejectedMessages">
<name>PartnerLinkName</name>
</reference>
</faultPolicyBindings>
We have SyncFileRead partner link.
The expectation is: when the message read by SyncFileRead partner link is rejected,
that rejected message should come to particular directory in the server.
Could you please help us fixing this.
TIA.

HI..
Have a look at this blog :
3) Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Description: The request requires user authentication
Possible Tips:
u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
u2022 If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
u2022 If the error is in Adapter Engine
u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
u2022 May be wrong password for user XIISUSER
u2022 May be wrong password for user XIAFUSER
u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Http* Errors in XI
Thanks,
Pooja

F4 for the file path

Hello Everybody,
Can someone tell me how to do the F4 for the file which is to be loaded from the presentation server,like v have for UPLOAD Function Module.
I have a Parameter for the file path in the selection,I want to know how do v take the file path by searching thru F4??
Thanks,
Anushka.

Hi Anushka,
refer sample code:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : rb_pc RADIOBUTTON GROUP r1 DEFAULT 'X'
                      USER-COMMAND ucomm,    "For Presen
             p_f1   LIKE rlgrap-filename
                                      MODIF ID rb1,    "Input File
             rb_srv RADIOBUTTON GROUP r1,
                                                       "For Application
             p_f2   LIKE rlgrap-filename
                                     MODIF ID rb2,
                                                       "Input File
             p_direct   TYPE char128 MODIF ID abc DEFAULT c_path
                                                       "File Directory
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-020.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_f1.
*-- Browse Presentation Server
PERFORM f1000_browse_presentation_file.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_f2.
*-- Browse Application Server
PERFORM f1001_browse_appl_file.
*&      Form f1000_browse_presentation_file
      Pick up the file path in the presentation server
FORM f1000_browse_presentation_file .
CONSTANTS: lcl_path TYPE char20 VALUE 'C:\'.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_path         = lcl_path
      mask             = c_mask "',.,..'
      mode             = c_mode
      title            = text-006
    IMPORTING
      filename         = p_f1
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
IF sy-subrc <> 0.
   MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
           WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    flg_pre = c_x.
ENDIF.
ENDFORM.                    " f1000_browse_presentation_file
*&      Form f1001_browse_appl_file
      Pick up the file path in the application server
FORM f1001_browse_appl_file .
DATA: lcl_directory TYPE char128.
lcl_directory = p_direct.
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
    EXPORTING
      directory        = lcl_directory
      filemask         = c_mask
    IMPORTING
      serverfile       = p_f2
    EXCEPTIONS
      canceled_by_user = 1
      OTHERS           = 2.
IF sy-subrc <> 0.
   MESSAGE e000(zmm) WITH text-039.
   flg_app = 'X'.
ENDIF.
ENDFORM.                    " f1001_browse_appl_file
Reward points if this Helps.
Manish

This is an error from my HP scanner. How can I fix the problem? An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

I recently uploaded the Maverick operating system. I wanted to scan some things on my HP Printer/Scanner and could not . This is the error message I received: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. I am a novice with the computer and have no one to help. I hope someone knows an easy fix.
Thank you

This worked for me:
"Although it is not a 'fix' for the HP issue, I did find a workaround that helped me. In the Preferences Panel in MacOS X you can pull up the Printer/Scanner preferences and scan directly from OS X. I'd not known of this prior to posting here and it worked like a charm."
"Of course, HP should still update their software, but it's good to know that Apple has it covered for them."
I found it here:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/MAVERICKS-WONT-SCAN-HP-C3 09A/td-p/3052105

I have Maverick 10.9.1 installed I scanned a photo on my HA D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

I have Maverick 10.9.1 installed I scanned a photo on my HP D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

Please choose a different name for the file

How can I stop this message appearning ?

By choosing a different name for the file?
You will need to provide a lot more information.
What are you trying to do when you see the message?
What version of Sqldeveloper are you using?
What operating system are you running on?

Sender file adapter - Can I use *.xml for the file name

Hi Gurus,
I have some interfaces where I need to pick the file from a directory. The name of the file will have Data<i>time stamp</i> as the naming convention. Can I use *.xml to pick up my files from this directory?
The help.sap.com documentation says that we can use this naming convention.
<b>
● File Name
Specify the name of the file that you want to process. The name can contain placeholders (*, ? (placeholders for exactly one character)) so that you can select a list of files for processing.
</b>
I tried using *.xml for my file name in the communication channel, XI is not picking up this file.
Please let me know if you have the solution.
Thanks
Kalyan

Murthy,
Thanks for the reply.
I am using GuildFTP tool as my FTP server. In this tool, all the permissions were given for the file to pick up.
The status of the file is good.
Where in the file adapter configuration I have to select 'Read-only'?
The file adapter is working perfect with the exact name of the file.
Thanks
Kalyan

File Adapter going into infinite mode while polling for the file

Hi,
I am facing an issue while the file adapter is reading the data from the file.
If the file from which it is reading has been deleted it keeps on polling for it infinite number of times and also doesn't pops out with any error message. Is there any method that after polling for some time period we can pop out a message that the particular file is not available and then the file adapter should stop polling for the file.Anyone has some ideas about this. Any pointers will be of great help.
Thanks
Vinay
Message was edited by:
soachd

Hi soachd,
As far as I understand polling is infinite process. You need to adopt this strategy if you are expecting some thing to happen all the time or may be when you want to be ready when ever an expected event happens. This provides a real time solution but with the downside of infinite execution.
Hope it helps.
Kalyan.

When I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.''

Patch 16388307 Failling For The File xla120balcp.ldt

Similar Messages

Maybe you are looking for