Patch ABAP and JAVA
Hi,
I´ve a application ABAP netweaver with the EHP1 with the level 701_05, but to I´ve an application JAVA netweaver with the level 7.00_17.
What can i do to have the same level of the kernell and basis?
More thanks
Hi,
There is no generic answer to your question.
This depends a lot of what you are running on ABAP and what on Java.
For example, if you want to run ESS on netweaver JAVA, the necessary SP levels and business packages releases and patch levels will depend from the EHP level, the basis and HR support packages of the ECC 6 back office abap system.
You have to read a lot of documentation and OSS notes to get this information...
Regards,
Olivier
Similar Messages
-
ABAP and JAVA stack together?
Hello Friends,
I wanted to install the ABAP stack SP12 with JAVA stack SP09. I am downloading the last file of the stacks. Is it possible to install them together on one OS(I have W2K Enterprise Edition)?
Can you guys please help me out here ?
Best Regards,
Fatih Koekce.Hi
Basically ABAP and Java patches would be inpendent of each other except the Kernel.
You can apply them together as Java patches are to be applied through JSPM and ABAP patches through SPAM, but it is usual practice to apply ABAP patches first and go ahead with Java stack. Because Applying them together would use considerable amount of system resources.
Hope this is helpful.
Regards
Rahul -
ABAP and JAVA trial together and RFC
Hello, I successfully installed NW ABAP 7.01 and NW JAVA 7.1 in the same machine and both installations work ok, but what I really want to do is to call some RFCs on the abap side from a web dynpro in the java side. I know i have to do something with the SLD, System Landscape Directory but I just don't know how to do the configurations, can anyone help me please?
Hi
Basically ABAP and Java patches would be inpendent of each other except the Kernel.
You can apply them together as Java patches are to be applied through JSPM and ABAP patches through SPAM, but it is usual practice to apply ABAP patches first and go ahead with Java stack. Because Applying them together would use considerable amount of system resources.
Hope this is helpful.
Regards
Rahul -
Hello,
We are having MI 7.0 at SPS15.Am trying to apply add to our system(we created SDA file from NWA as an addon).SDA addon getting deployed but its not getting sync between ABAP and Java stack even if is run reload sever time from NWA->Administrator->Mobile Infrastructure->Mobile Components.I can see add-on when i check from SDM but it cannot see when i search under Mobile component in NWA.Application logs shows below error.
#703543993#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##8e6d577024d511e1a299001635730592#SAPEngine_Ap plication_Thread[impl:3]_10##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592001800000015000030100004B3E6C1311ED1#1323703575929#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##a19424a024d511e18ede001635730592#SAPEngine_Ap plication_Thread[impl:3]_9##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBea n#Plain####
#1.#001635730592000F00000016000030100004B3E6C662CEBE#1323703663073#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_ADMIN#47##n/a##d588777024d511e1c64a001635730592#SAPEngine_A pplication_Thread[impl:3]_18##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerB ean#Plain####
#1.#001635730592002000000015000030100004B3E6CDC2D7E4#1323703786809#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##1f482a9024d611e18dc1001635730592#SAPEngine_Ap plication_Thread[impl:3]_29##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#00163573059200260000000C000030100004B3E6D02A2DDA#1323703827137#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##37527e6024d611e1a43c001635730592#SAPEngine_Ap plication_Thread[impl:3]_39##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#00163573059200350000000B000030100004B3E6D1150767#1323703842528#/Applications #sap.com/tcwddispwda#com.sap.ip.mi.admin.wd.paramset.Details.Method-->wdDoModi fyView()#J2EE_ADMIN#56##uwsvt729.merck.com_VZ1_12609950#J2EE_ADMIN#2e05832024d61 1e1b753001635730592#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#com.sap .ip.mi.admin.wd.paramset.Details#Plain###Specify all parameters#
#1.#00163573059200250000007C000030100004B3E6F8460AEE#1323704500063#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##c86ab33024d711e185b5001635730592#SAPEngine_Ap plication_Thread[impl:3]_22##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592002F00000015000030100004B3E728C1AF02#1323705313486#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##ad1da59024d911e1a138001635730592#SAPEngine_Ap plication_Thread[impl:3]_37##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592000F0000000000002A400004B3E754A629F8#1323706045836#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.serverAPI.CmsOrganizerAdapter#J2E E_GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[im pl:3]_26##0#0#Info#1#com.sap.cms.pcs.serverAPI.CmsOrganizerAdapter#Plain###CMS o rganizer proxy is waiting for requests#
#1.#001635730592000F0000000100002A400004B3E754A659EE#1323706045848#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.serverAPI.CmsManagerAdapter#J2EE_ GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl :3]_26##0#0#Info#1#com.sap.cms.pcs.serverAPI.CmsManagerAdapter#Plain###CMS manag er proxy is waiting for requests#
#1.#001635730592000F0000000200002A400004B3E754A6715D#1323706045854#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.transport.proxy.CmsLogViewer#J2EE GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngineApplication_Thread[imp l:3]_26##0#0#Info#1#com.sap.cms.pcs.transport.proxy.CmsLogViewer#Plain###CMS Log Viewer is waiting for requests#
#1.#001635730592000F0000000300002A400004B3E754A67B77#1323706045857#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###CMS recovery servlet is wai ting for requests#
#1.#001635730592000F0000000400002A400004B3E754A67CE5#1323706045857#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###start recovery#
#1.#001635730592000F0000000500002A400004B3E754AA7F91#1323706046120#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###CMS recovery found 0 QueueItem(s) wi th state Import running in 0 queue(s). Start check if they are really running or need recovery.#
#1.#001635730592000F0000000600002A400004B3E754AA8344#1323706046121#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###Finished check and recovery for all CMS QueueItems of state Import running. Checked Items: 0; Recovered Items: 0; Re covery Failed Items: 0; Real running Items: 0#
#1.#001635730592000F0000000700002A400004B3E754AAACBA#1323706046132#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###CMS recovery found 0 QueueItem(s) wi th state Assembly running in 0 queue(s). Start check if they are really running or need recovery.#
#1.#001635730592000F0000000800002A400004B3E754AAAEE5#1323706046132#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###Finished check and recovery for all CMS QueueItems of state Assembly running. Checked Items: 0; Recovered Items: 0; Recovery Failed Items: 0; Real running Items: 0#
#1.#001635730592000F0000000900002A400004B3E754AAB68F#1323706046134#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###finished recovery#
#1.#00163573059200140000000300002A400004B3E7AA40154F#1323707482010#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##b9c439d024de11e1a4ee001635730592#SAPEngine_Ap plication_Thread[impl:3]_10##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
ThanksHi,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Ever wondered how and where the XI pipeline gets executed? It happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Take a look at the XI overview doc to understand this better,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a3d3c390-0201-0010-c490-bd85917138c8
Regards,
Bhavesh -
Short dump Error during VM container communication between ABAP and JAVA.
Hello All,
Can anybody please help with resolving the following issue:
Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
When I try to insert ECC migrated material, everything works fine.
Here is the details of dump:
Short text
Error during VM container communication between ABAP and JAVA
Information on where terminated
Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
Thank you!hi Willie,
this is the dump, and i have used the t-code sm52 . the VMC is not active.
|Short Text |
| Error during VM Container communication between ABAP and JAVA. |
|What happened? |
| The current program had to be terminated because of an |
| error when installing the R/3 System. |
| Error in the RFC layer. |
|What can you do? |
| Note which actions and entries caused the error to occur. |
| |
| Consult your SAP administrator. |
| |
| Using transaction ST22 for ABAP dump analysis, you can view, manage, |
| and retain termination messages for longer periods. |
|Error analysis |
| An error has occurred in the RFC layer during communication between |
| JAVA and the ABAP stack. This prevents data from being passed correctly |
| between the two stacks. |
| |
| Message = TH_VMC_SERV_NOT_ACTIVE |
| Return code = -1007 |
| Pointer = "000007DD348F6138" |
|How to correct the error |
| Check whether the VMC is active on your application server. To do this, |
| run transaction SM52. If the VMC is not active, contact your SAP |
| administrator. |
Regards
Charles -
WebDispatcher on ABAP and JAVA on serperate Servers
Hi all,
i read a lot of hours trough post concerning issues about web dispatcher, but i didn't find anything that suits my problem.
We have a MSCS-Cluster. One Node has the db which is for ABAP and JAVA (different schemas).
Than we have an SCS for ABAP and one for JAVA.
So the ABAP and JAVA-Instances are physically separated.
Now we want to use a web dispatcher to pass the requests to the right destination.
But i am not sure how to set it up. Do we need 2 dispatcher, or can one handle the requests. How does the dispatcher knows, where to redirect the requests ?
Is that done with the parameter icm/HTTP/redirect_<xx> ?
in hope of any advise to this problem
yours
BjoernTrabesSo, i tested around a little bit.
i am not clear with the function of the dispatcher.
When i bind the ABAP Dispatcher, than all requests to /sap/ are handled by the ABAP-Stack an are working, but when i browse to an Adress like /irj/portal/ the dispatcher says that the Adress is noch reachable.
When i bind the dispatcher to the Java-Stack, than all Java-Adresses work, but the /sap/ not, which is the ABAP Stack.
so, i don't know exactly where my fault is.
How knows the Dispatcher, where the ABAP or JAVA-Stack is.
On an other Machine where the java is an add-in, it works quite well, but on this server the abap and Java Servers are physically separated.
greets
Bjoern
Edited by: Björn Trabes on May 18, 2009 10:59 AM -
Hi friends,
If anybody knows how to refresh an abap and java systems (not abap+java addin)
can you please send the docs?
Thanks.Hi,
Plz check this link for ABAP refresh.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/fb/35c62bc12711d4b2e80050dadfb92b/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/fb/35c62bc12711d4b2e80050dadfb92b/content.htm</a>
Regards,
Subhasha Ranjan -
Whats the use of an ABAP and Java Stacks in XI? What exactly they are doing for XI?
Thanks.Hi,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Ever wondered how and where the XI pipeline gets executed? It happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Take a look at the XI overview doc to understand this better,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a3d3c390-0201-0010-c490-bd85917138c8
Regards,
Bhavesh -
Wanted to confirm my understaing for ABAP and JAVA mapping.
Am I correct in my assumption that these mapping techniques can be used only if input and ouput is in XML format ?
So if XI is receiving a flat comma separated text/non-XML file or an IDOC for that matter and output is NOT in XML format, say again flat text file or IDOC, I cannot use above two techniques?
All the docs I have read suggest that 'Execute' method is called when XML file/data is received, paresed using DOM/SAX/JAXB (for Java mapping) or IXML lib (for ABAP mapping) and then create a output XML file.
-Thanks in advanceHi Bob,
Here you have a code sample for deescaping. I have have written this code a couple of time ago. The incoming file can be any text format. It might be XML, but not necessarily.
The main method is not reqired, but good for testing.
Regards
Stefan
* Created on 28.09.2005
* To change the template for this generated file go to
* Window>Preferences>Java>Code Generation>Code and Comments
package sample;
import com.sap.aii.mapping.api.*;
import java.io.*;
import java.util.Map;
public class Deescaping implements StreamTransformation{
public static void main (String[] args) {
try {
InputStream in = new FileInputStream(new File("in.xml"));
OutputStream out = new FileOutputStream(new File("out.xml"));
Deescaping change = new Deescaping();
change.execute(in, out);
} catch (Exception e) {
e.printStackTrace();
public void setParameter (Map map) {
public void execute (InputStream in, OutputStream out)
throws StreamTransformationException {
try {
int c;
while ((c = in.read()) != -1) {
if (c != '&') {
out.write(c);
} else {
// ampersand
String help = "&";
boolean exit = false;
// check the next 5 chars, if there is a ';'
for (int i = 0; i < 5 && !exit; i++) {
c = in.read();
if (c == -1) {
exit = true;
} else {
// another ampersand?
if (c == '&') {
out.write(help.getBytes());
help = "&";
i = 0; // check the next 5 chars
} else {
help = help + (char) c;
if (c == ';') {
exit = true;
if (help.equals("&")) {
help = "&";
if (help.equals("<")) {
help = "<";
if (help.equals(">")) {
help = ">";
if (help.equals(""")) {
help = """;
if (help.equals("'")) {
help = "'";
} // for
out.write(help.getBytes());
} // while
out.flush();
} catch (Exception e) {
throw new StreamTransformationException(e.getMessage(),e); -
Time out parameters for ABAP and JAVA instance
Hello All,
We are looking for Time out parameters for our ABAP and JAVA instances.
As users are complaining that they are getting time out error
while they are trying to access Cprojects from Portal.
I was able to check/collect the ABAP instance parameters from SMICM Tcode.
Can anybody tell me which parameters we need to look for JAVA instance.
Thanks in advance.
Regards,
Amber Sjstart/shutdownTimeout
(jstartup/shutdown_timeout)
Specifies the shutdown timeout, i.e. the grace period for the AS Java instance to shut down before the Java process terminates itself. Unt is in Seconds. Default is 120
j2ee/ms/connectTimeout
(jstartup/wait_for_scs)
Specifies the timeout for the first connection to the message server. The AS Java instance fails to start if this timeout expires.Unt is in Seconds.Default is 60
j2ee/ms/reconnectTimeout
(jstartup/wait_for_reconnect)
Specifies the timeout for the reconnecting to the message server.The AS Java instance shuts down when this timeout expires.Unt is inSeconds.Default is 3600 (one hour)
Thanks -
Links for ABAP and JAVA Admin + Troubleshooting
Hi Gurus,
Can anyone send me the useful links for Admin + Troubleshooting in SAP BASIS i.e. ABAP and JAVA ?
Also, which are the Routing Maintenance Tasks in SAP BASIS ?
Any / All help is most welcome and would be rewarded with suitable points.
Many Thanks in Advance ,
Regards,
- IshanHello Balaji,
Yes, you can connect the JAVA user adminsitration with the Single CUA.
Make use of the JAVA UME feature for this.
http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/content.htm
Regards,
Ammey Kesarkar -
ABAP and Java HTTP Port same - PI 7.1 EHP1
Hi,
I have installed PI 7.1 EHP1 system.
I realize that both ABAP and Java HTTP Ports are same.
Is there any official note reg this or any info from SAP on the change.
icm/server_port_0 = PROT=HTTP,PORT=51500,TIMEOUT=60,PROCTIMEOUT=600
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
Thanks,
TanujHi,
>>I realize that both ABAP and Java HTTP Ports are same.
the changed happened in 7.1 already as far as I remember
but I don't think it's documented anywhere except maybe the installation guide
Regards,
Michal Krawczyk -
RSPOR_SETUP = Different ABAP and Java support packages.
Hi all,
We have an ECC 6.0 system with abap+java stacks. When we run the RSPOR_SETUP report we get this error:
Different ABAP and Java support packages. Combination of support packages invalid
And with some more clicking we find this:
6. Compare version information of Java support package (com.sap.ip.bi classes) with ABAP support package (SAP BI)
ABAP Support Package: 13
Java Support Package: 0
On the Java stack we see (among others) these components:
sap.com BI-IBC 7.00 SP12 (1000.7.00.12.0.20070509050058)
sap.com BI_MMR 7.00 SP12 (1000.7.00.12.0.20070507084106)
sap.com BI_UDI 7.00 SP12 (1000.7.00.12.0.20070507084125)
sap.com BI-BASE-S 7.00 SP12 (1000.7.00.12.11.20080324092518)
sap.com BI-WDALV 7.00 SP12 (1000.7.00.12.1.20071105133039)
sap.com BI-REPPLAN 7.00 SP12 (1000.7.00.12.3.20080104101916)
So I believe all components are correctly installed.
What are we doing wrong?Hello.
Please be aware, that report RSPOR_SETUP should NOT be used with a Netweaver 04s system. This report has been replaced by the support desk tool. I request you to run the support desk tool as per note 937697 to check if there are any configuration issues in your system.You can resolve any red traffic lights that might be reported by the tool by following the corresponding actions suggested.
I hope I can be helpful.
Thanks,
Walter Oliveira. -
How to connect separated ABAP and Java stacks ?
Hi,
I have installed two separate ABAP and Java Stacks and trying to connect both the stacks together.
As per my understanding, only JCO RFC is the mean of communication between ABAP and Java stacks.
But still even after configuring the JCO RFC successfully, I am unable to view, configure or control
J2EE stack's status from smicm (ABAP).
Would you please suggest me, if there is any more configuration to be done on abap or Java stack side.
Thanks,
Cheers !!!
AshishHi Sunny,
JCO RFC is tested and it is working fine. So no issues from JCO RFC side. Hope you would have read carefully.
>
Ashish Mishra wrote:
> But still even after configuring the JCO RFC successfully, I am unable to view, configure or control
> J2EE stack's status from smicm (ABAP).
>
========================================================
Hi Anil ,
Thanks for your reply. but
>
Ashish Mishra wrote:
>
> I have installed two separate ABAP and Java Stacks and trying to connect both the stacks together.
>
Hope I am able to clear your doubt. Java is completely separated stack and not add-on.
Suggest me how can I proceed further on this connectivity.
=========================================================
Hi Olivier,
I am grateful to you for your reply. I understood your point but now except a successful JCO RFC test,
is there any mean to check and ensure that both the stacks are connected properly and ready to use.
Regards,
Ashish -
Individual business system for ABAP and Java Stack
Hi All,
I need to send message from a system to XI via ABAP proxy and Java proxy. The sender's ABAP and Java proxy use the same message interface to communicate with XI. Should I create one business system for the ABAP stack and one for Java stack of the sender system?
Thanks + Best Regards
JeromeAre you sending same message type from ABAP proxy and Java Proxy to XI?
If you have ABAP proxy, why do you need Java Proxy? Actually you cannot create any Java proxies on ABAP bases systems. What kind of system sender is? Java proxies are created for pure Java based applications.
Let me know if I didnt understand your question correctly. If so, please explain in detail why you need both proxies and what is your sender application.
--Archana
Maybe you are looking for
-
Integration of a web application running on tomcat
Hi all experts, I want to integrate a web application running Apache Tomcat/5.5.20. it's login page(jsp page) have two input box uid and pwd.Login Application calls a servlet in Apache Tomcat/5.5.20 web.xml. For Accessing the loging page url is http
-
Large Aperture 2 Library Migration to Aperture 3, on a new Mac Pro
Hello, I am upgrading from a PowerMac G5 to a Mac Pro and so I am going to also upgrade Aperture to version 3 at the same time. I am currently using a managed library on a 1.5TB RAID-1 array in my PowerMac. I am hoping to convert that to a referenced
-
Why Can't I use BT when I am using the wireless Network?????
Why Can't I use BT when I am using the wireless Network????? I am using airport extreme.....
-
Always no response for video/audio chat
neophyte here; and i cannot gasp ichat yet; i tried once with a Mac friend, but everytime I add her to my buddy list, she goes offline and I couldn't reply to any of her messages as there is no message line for me to type in. Also, everytime I invite
-
Paragraph Style to control paragraph breaks?
Hi All, How do you add paragraph breaks using Paragraph Styles? I'm sure the answer is pretty obvious, but I don't have the vocabulary that comes with a layout/print background so I'm probably looking at the setting but not knowing it. What I'd like