Patch approval error getting from solution manager
Hi,
We are getting error while downloading patch approval from solution manager. As reference below error, I have checked this note 982045 & put valid user id & password of the service market place there but error is getting same. Here following error screen as mentioned below. please suggest us.
Regards
Abhijit
Hi,
Thanks for sharing these note but after using this note 1178684, we are facing this error as follows.
trc file: "dev_rout", trc level: 1, release: "700"
Fri Feb 28 16:37:05 2014
SAP Network Interface Router, Version 38.10
command line arg 0: saprouter
command line arg 1: -r
main: pid = 4072, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
Fri Feb 28 16:37:06 2014
reading routtab: './saprouttab'
*** ERROR => SNC field without SNC active, skip line 2 [nirout.cpp 7767]
*** ERROR => SNC field without SNC active, skip line 3 [nirout.cpp 7767]
*** ERROR => SNC field without SNC active, skip line 4 [nirout.cpp 7767]
*** ERROR => SNC field without SNC active, skip line 5 [nirout.cpp 7767]
*** ERROR => SNC field without SNC active, skip line 6 [nirout.cpp 7767]
Fri Feb 28 16:37:43 2014
*** ERROR => SncPEstablishContext() failed for target='p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE' [sncxxall.c 3379]
*** ERROR => SncPEstablishContext()==SNCERR_GSSAPI [sncxxall.c 3345]
GSS-API(maj): Miscellaneous failure
GSS-API(min): Invalid password (PIN)
Unable to establish the security context
target="p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
<<- SncProcessOutput()==SNCERR_GSSAPI
*** ERROR => NiSncIInitHdlSecurity: SncProcessOutput failed (rc=-4;0206E3B0) [nisnc.c 1098]
*** ERROR => NiSnc2Connect C1/-1, 194.39.131.34 (rc=-17) [nirout.cpp 2816]
*** ERROR => NiRClientHandle: NiRExRouteCon for C1/-1 'solman' failed (rc=-17) [nirout.cpp 2243]
Regards
Abhijit
Similar Messages
-
Hi all,
I want to download in excel file BPML from solution manager, kindly guide me the process, can we do that from solution manager or is there any other similar thing to BPML that we can get from Solution manager.
Thanksthere isn't a true BPML in SolMan.
The closest thing you can get to it, which better in my opinion, is:
1. Go to SOLAR_EVAL
2. Under configuration select the Cross Tab analysis report
3. Select the various reports you wish to merge (I recommend transactions, config, development and testing if you have used those tabs)
4. Click execute
5. Export it to Excel
6. Enjoy!
regards,
Jason -
Error when undate solution manager from 700 to 701(700 enp1)
Hi all,
error when undate solution manager from 700 to 701(700 enp1),error:OCS package SAPKITL428 does not match the current software component vector.
My current supportstack is as follows :
SAP_ABA 700 0016 SAPKA70016
SAP_BASIS 700 0016 SAPKB70016
PI_BASIS 2005_1_700 0016 SAPKIPYM08
ST-PI 2008_1_700 0002 SAPKITLRD1
SAP_BW 700 0018 SAPKW70018
SAP_AP 700 0014 SAPKNA7014
BBPCRM 500 0012 SAPKU50012
CPRXRPM 400 0014 SAPK-40016INCPRXRPM
ST 400 0017 SAPKITL427
ST-A/PI 01L_CRM570 0000 -
ST-ICO 150_700 0017 SAPK-1507KINSTPL
ST-SER 700_2008_1 0005 SAPKITLOO5Hi,
Because prerequisite to apply this package is not met. To apply this package below is the prerequisite which i can see in your package level is not met:
Support Packages
Package Value
SAPKU50012 T
SAPK-70401INBICONT T
SAPK-40013INCPRXRPM T
SAPK-50001INCRMUIF T
SAPKA70102 T
SAPKNA7012 T
SAPKB70101 T
SAPKB70102 T
SAPK-701DHINSAPBASIS T
SAPKITL427
Thanks
Sunny -
SAP GUI 7.10 - Issue reading files from Solution Manager
Hi everyone,
We have just installed SAP GUI 7.10 on our PC and have tried to open documents from Solution Manager.
On both Display and Change mode we are getting "The document cannot be displayed" (SOLAR_DOC021)
Can you suggest anything regarding the source of the problem? Any quick resolution?
Thank you
CorinneFound it myself. Tricky indeed.
http://service.sap.com/patches
- Search for Support Packages and Patches
- Enter Search Term "SAP GUI"
- Select SAP GUI FOR WINDOWS
- Select SAP GUI FOR WINDOWS 7.10 CORE
- Select SAP GUI FOR WINDOWS 7.10 CORE, on the next page also
- Select Win 32
- Arrive at avail. downloads
Regards,
Nathan -
How to download support packs from solution manager
Hi Experts ,
Please tel me the process for down loading support packages from solution manager.iam very new to this process
How can get an approval in solution manager to down load support packages in step by step process
RegardsPlease check: http://service.sap.com/solutionmanager -> SAP Solution Manager in Detail -> Maintenance Optimizer -> Links and Downloads.
Kind regards,
Mark -
Early watch alert from Solution manager
Hi ,
I have been receiving the earlywatch alerts from Solution manager to my mailbox.
But this week I didn't receive early watch report . I am getting all other alerts through solution manager to my mailbox.
I checked in the receipients list and my emailID is there and when I checked in SOST in solution manager I can't see that the report in any status there.
What will be the probelm?
Please do reply to this query.
Thanks
Gayathri.Subhash,
Thanks for the reply, I checked that already.
I checked and found that in Early watch report is with status data available , but not send .
Its showing that the job SM:EXEC SERVICES has to run.
This job has failed in Solution manager with the error as follows.
ABAP/4 processor: EXPORT_TABLE_UPDATE_CONFLICT
Job cancelled
Thanks
Gayathri -
Can not send mail from Solution Manager
hi,
We try to send mail from Solution Manager workplace (SBWP). But when we try to send mail we get an error message "Address does not exist" .
Best RegardsHi,
If you have already configured SCOT,this can be an inconsistency. Please try to run the report: 'RSSODIAD'.
I hope it helps.
Regards,
Sam -
SSO from Solution Manager to Wily Enterprise Manager issue
Hi,
We are facing problem in SSO from Solution Manager to Wily Enterprise Manager. We have done the configuration as per the Wily Enterprise Guide- "Introscope Version 8 Installation Guide For SAP" Page 38.
Our Solution Manager system is running on AIX platform and Wily Enterprise Manager is on Windows 2008.
This is what we are trying
SOLMAN Production Client --> SOLMAN_WORKCENTER --> INTROSCOPE WORKSTATION --> this opens a new browser page and from there we click on Start Introscope -->
Result --> SSO doesn't work, still we get login window.
Introscope Enterprise Manager logs says -->
9/12/11 10:47:17 PM BST [WARN] [Manager] Single sign on failed: No SAP single sign on ticket was found in the request header.
Note: Another Solution Manager system in our landscape (on windows 2008 platform) is connected to same Wily Enterprise Manager (windows 2008) and from this solution manager SSO to Wily Enterprise Manager is working.
Please help me with your expertise to solve this problem.
Best Regards
DavinderHello Singh,
Could you check if you have maintained these parameters in instacne profile ?
From SCN post -> http://scn.sap.com/thread/969538
Hi Hector,
To configure SSO as per initial setup guide, please check your profile parameters in your Solution Manager as below:
You have set up SSO, see also:
SAP Note 817529: Checking the SSO Configuration
Installation Guide and Security Guide for SAP Solution Manager
Create the following profile parameters in the instance profile:
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = fully qualified server name
This parameter must be attributed to the fully qualified server name (for example wdfd002568.wdf.sap). The name must contain at least two periods. See also SAP Note 434918.
Hope this helps,
Regards,
-Rohan
BR,
kamil -
ORA-19511: Error received from media manager layer, error text:
Dear Concern,
When I am restoring the oracle 9i database by brtools for SAP ECC 5.0 the following error message appeared. Mention that, this is second time restoration. First time restoration was successfull. After that one of us change some permission in differerent folders and files in the hp-ux server. Now we facing the following problem. Please help me...
BR0449I Restore mode: ALL
BR0419I Files will be restored from backup: bechtawc.fnr 2010-01-08 20.00.06
BR0416I 100 files found to restore, total size 520901.781 MB
BR0424I Files will not be decompressed
BR0421I Restore device type: rman_util
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.21
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0554I Starting restore from full database backup using RMAN...
BR0278E Command output of 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog':
Recovery Manager: Release 9.2.0.1.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
RMAN> connect target /;
connected to target database: PRD (DBID=1654880374)
using target database controlfile instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on sbt_1 channel at 01/19/2010 16:19:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
HP-UX Error: 8324: Unknown system error
Additional information: 7110
ORA-19511: Error received from media manager layer, error text:
SBT error = 7110, errno = 8324, sbtinit: internal error - invalid argument(s)
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0279E Return code from 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance PRD failed
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0556E Restore from full database backup using RMAN failed
Best Regards
WahidHi,
It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
Our syestem info is:
DB: Oracle 9i
OS: HP-UX
Storage: EMC storage
Backup tools: Data protector 5.5
Please help me.
Regards
Wahid -
Connection from Solution manager to SapNet
Hi,
I want connect from solution manager to sapnet for downloading support packages. What i need to do ?
I think that i need to:
1. official IP address for solution manager host ? Could this ip address be one in all network and routed to solution manager host ?
2. Install sap router on solution manager host ?Hi Mindaugas,
For getting SAP Solution manager connected to SAP Net the following where mandatory
We Should have a official IP address of the computer on which SAP router can be configured. Its not necessary that you should have it in solution manager server. You can have it in any of the computer within your network and configure SAP router in that machine. This should be an official and registered IP address. You cannot use address such as
10.0.0.0 to 10.255.255.255
172.16.0.0 to 172.31.255.255
192.168.0.0 to 192.168.255.255
Later solution manager can be connected to SAP net using three RFC connections SAPOSS, SAP-OSS, SAP-OSS-LIST-O01. But before starting this make sure that you have configured SAP router correctly. Only then these RFC connections will work.
Also refer Note: 28976
regards,
Anandh -
How to find ECC users from solution manager
All,
I want to know is it possible to get the list of ECC users from different clients and environments within Solution manager. Also how can I see from solution manager what are the ECC clients it had connections with.
ThanksHi,
try the report AI_SDK_USER_BP_GEN within Solman. You can check the users of all connected systems there and additionally generate business partners for them.
To get an overwiev over the system landscape try transaction SMSY.
Best regards,
Martin -
Email alert from Solution Manager
Hi
I have configured both System and Business Process Monitoring in SAP Solution Manager.
I can catch all the errors and display them in the graphical view, I can see details and so on.
Unfortunately I don't receive any email alert from Solution Manager.
Could somebody provide me a check list to verify where's the problem and why I can't receive email alert?
Thank you
AlessiaHi Alessia,
I´d like to help you, but could you plz provide me some more information about your configuration: auto reaction methods, scot, type of monitors etc.
Dom -
An advanced solution for sending email from Solution Manager (or CRM)
Hi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
AndyHi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
Andy -
Business Process Procedure from SOlution Manager
Hello Gurus,
I am working on technical upgradation from 4.7 E to ECC 6.0. We will have to create Business Process Procedures for each module. Could you please tell me how we need to extract the BPPS from solution manager.
Thanks and Regards,
Pavan P.Hi Pavan,
The way to extract from BPS may be a long drawn one. The shorter way is to attempt the following:
Go to http://service.sap.com/solutionmanager, supply your OSS ID and password.
a) On the left hand panel, go to SAP Solution Manager in Detail -> Implementation -> Implementation Content
OR
b) Downloads -> view screen on the right hand side and then click on "overview of the current implementation content".
I'll try to figure out any other way and get back to you.
Best regards,
Srini -
Error message in solution manager while importing transport using CHARM.
Hi All,
I am gettting below message while i am trying to import a change request using CHARM from solution manager
"You are not allowed to work on a CR for UNITEOPS"
"Data type-specifc customizing missinge for a data type"
But other user in our team able to do the import of change request. I checked all roles and authorization are same for both the user but still it is not working for my user-id and it is working for my team member user-id
Can you please guide? Is there any customizing missing for my userid?
ThanksHi,
Perhaps the info in this thread could be useful:
ChaRM roles or profile missing for Developer and Change Manager
Regards,
Srikishan
Maybe you are looking for
-
Video no longer plays from sites on comedy central. Site says browser must be updated, but I have installed all updates and restarted the computer..twice.
-
Why not perform the ${attribute} syntax in the jsp context with weblogic?
In the action an attribute has been put in request object, example request.setAttribute("userName","Xue Chen"). in the forward jsp , use the syntax ${userName}, can not get the attribute "Xue Chen" from request, but the "${userName}" be printed in th
-
Service Requests stuck In Progress
I have about 20-30 service requests that are stuck in the In Progress state. The activities on the Service Request have been completed. I have tried restarting the services below and deleted the HealthServiceStore.edb file in the folder C:\Program Fi
-
Iphoto upgrade - now app won't open!
Why cant I get iphoto working even though Ive done the upgrade and installation? Every time I open iphoto gives me a Learn more or quit option. Tried restarting, reloading upgrade
-
How to edit etc/apache2/httpd.conf? Pica won't take my password. I can navigate to the pico prompt in terminal ... but when it asks for pw, I try to type, the cursor just blinks, doesn't move, nothing. But if there's another way to edit this file, I'