Patch: CSCun25809, AnyConnect Password Management Fails with SMS Passcode for ASA 5520

Patch: CSCun25809, AnyConnect Password Management Fails with SMS Passcode for ASA 5520
Will this patch be installed in a version which I can use on ASA5520, if I understand the documentation correct, this patch is only installed in versions which are running on -X models of the ASA. 9.2, 9.3

Once the ASA has dynamic NAT enabled to an outside interface, routing between same security level will not work.
You need to add route exempt the inside interfaces to all private subnet.

Similar Messages

Password Manager failed working with PrivateDisk

i tried to use password manager to manager the password of PrivateDisk, but password manager failed reading password of privatedisk by reading all stars("************"), and if i use Ctrl + Shift + H and enter the right password, everytime after i pushed the OK button on privatedisk the password manager asks that the passwords mismatch, update?
how can i solve the problem? thanks

Same problem here. I just recieved mine (Win 7 pro 64 bit, X201 Multitouch) last week and password manager not working at all in ANY web browser. It recorded my .net password just fine, but i can't get it to work in IE8. Who pays this kind of money for something that doesnt work?
Fix this Lenovo!

Does ThinkVantage Password Manager work with Firefox 3.6. Earlier versions it would not work.

Last time I installed Firefox it would not load Lenovo ThinkVantage Password Manager as a plug in. Since then I have not used Firefox. I would like to again try Firefox but thought I would ask the question first. Can I use ThinkVantage Password Manager with Firefox 3.6?

Lenovo have released a patch that will make the ThinkVantage Password Manager work with Firefox 3.6 and higher. You can download it from:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-75278
I've just installed it and it works perfectly now.

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Clean Install Solaris 10 05/09 - Update Manager Fails with Valid Acct

I have a clean install of Solaris 10 05/09, and Update Manager fails to register using a valid accout which I can login with at the Sun website. Why is this happening? How can this be fixed?

Here's the output from the script....
User: root
Logname: root
Tue Oct 6 15:35:18 EDT 2009
unknown
smpatch settings:
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset - current2
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
smpatch analyze:
Failure: Cannot connect to retrieve current2.zip: This system is currently unreg istered and is unable to retrieve patches from the Sun Update Connection. Please register your system using the Update Manager, /usr/bin/updatemanager or provid e valid Sun Online Account(SOA) credentials.
Entitlement:
cat: cannot open /var/sadm/spool/cache/entitlement/*entitlement_client
Sun UC patch revision:
120336-04
121082-06
121119-16
121454-02
123004-03
123006-07
123631-03
123896-05
123896-15
124187-07
137138-09
Solaris release:
Solaris 10 5/09 s10x_u7wos_08 X86
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 30 March 2009
Solaris Kernel: Generic_141415-10
Machine Type: i86pc
Platform: i86pc
Java versions:
System default:
java version "1.5.0_21"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_21-b01)
Java HotSpot(TM) Client VM (build 1.5.0_21-b01, mixed mode, sharing)
Java 5:
java version "1.5.0_21"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_21-b01)
Java HotSpot(TM) Client VM (build 1.5.0_21-b01, mixed mode, sharing)
Java 6:
Unable to locate JRE meeting specification "1.6*"
Java used by smpatch and updatemanager:
/usr/sbin/pprosvc:JAVACMD="/usr/jdk/latest/bin/java -version:1.5*"
/bin/updatemanager:JAVA_EXEC="/usr/jdk/latest/bin/java -version:1.5*"
Cacao Java version:
java-home=/usr/jdk/jdk1.5.0_21
Cacao Base Directories:
cacao.install.rt.base.dir=/
cacao.install.etc.base.dir=/
Software Cluster:
CLUSTER=SUNWCall
All ccr properties:
18:
Property not defined: 18
cns.assetid:
cns.br.SunUCenabled:
true
cns.ccr.keyGenPath:
/usr/lib/cc-ccr/bin/ccrKeyGen
cns.clientid:
cns.httpproxy.auth:
cns.httpproxy.ipaddr:
cns.httpproxy.port:
cns.regtoken:
cns.security.password:
cns.security.privatekey:
cns.security.publickey:
cns.swup.UMautolaunch:
false
cns.swup.autoAnalysis.enabled:
true
cns.swup.checkinInterval:
2
cns.swup.lastCheckin:
0
cns.swup.patchbaseline:
current
cns.swup.regRequired:
true
cns.transport.serverurl:
patchsvr not installed.
Sun UC package status:
SUNWbreg not installed
SUNWdc not installed
Cacao instances:
online 15:19:45 svc:/application/management/common-agent-container-1:def ault
Services in maintenance/disabled state:
svc:/application/print/server:default (LP print server)
State: disabled since Tue Oct 06 15:15:37 2009
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: man -M /usr/share/man -s 1M lpsched
Impact: 2 dependent services are not running:
svc:/application/print/rfc1179:default
svc:/application/print/ipp-listener:default
Please attach /tmp/unknown-061009-suc-out.Z in your reply to the Sun Update Conn ection Technical Support Team.
#

Error: The AcquireConnection method call to the connection manager failed with error code 0xC0202009 using DB2 connection

I have a SSIS project that I am newly running on the SQL server (2005) . It was previously run on my PC. I am importing data from a DB2 server to the SQL server.
I am in the SA group on the server
My connection to DB2 works
When open the package and run it in preview mode, I can retrieve the data.
When I execute the package I get the below errors:
[MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
What I have already done that has not worked:
The original Protection level was set to EncryptSensitiveWithPassword.
I have reset the Package Password.
I have set the protection level to DontSaveSensitive
I saved the package on the server and set a Package Password.
I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
Error continues

Yes. The Drivers are installed and I have a successfull connection. I am trouble shooting the issue on the server in BIDS. I can connect to the DB2 server via the Connectionmanager. I can also preview the data in the OLE
DB source connection. Therefore I know that I have a proper connection
If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
will enable you to change connection info at runtime.
If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

ThinkVantage Password Manager incompatible with Firefox 7.0.1

I've updated my Firefox to 7.0.1 and have noted the greyed out message within the FFox add-ons that the ThinkVantage Password Manager is incompatible with Firefox 7.0.1 I have search for a fix or patch from Lenovo that address this issue with this version of FFox but have not found any solutions. Does anyone have an ear to a possible solution? Thanks!
Moderator edit: Removed javascript from post.

Hi,
There is a patch for FF support.
Please check the link below,
http://forums.lenovo.com/t5/ThinkVantage-Technologies/Password-Manager-compatibility-issue-with-Fire...
If you are using FF8.0 and it is not working after the patch is installed.
To the following steps:
Disable password manager extension from FF,
And find the file "tvtpwm_jstypes.xpi" and drag it into FF to reinstall the extension.
This file is usually in folder, "c:\swtools\css83_firefox5_patch"

Does Firefox password manager work with Yubikey?

I'm considering using a Yubikey and need to know will it work with Firefox browser and password manager.

What do you mean "will it work with?" In what way? Do you want to use it as the master password, do you want to use it for two-factor, do you want to save keys and then use them later? What are you asking?

Cisco ISE integration with SMS passcode Device

HI Experts,
i have a scenario where the requirement is to integrate the ISE device with SMSpasscode device which will trigger the OTP to the mobile devices
Currently i have my authentication configured to work with the AD
When my VPN users connects its authenticates against AD and the users get the access .
Now as per the new requirement once the user is authenticate against AD , the user should be prompted for the OTP password send to the users using SMS passcode device
Anyone had worked on similar requirement please help me to resolve the issue .
Thanks in advance
Angus

Hi all
I am working exactly for a month on this topic with no success.
I need to integrate VASCO OTP solution. But VASCO do not support any external authentication backend for virtual/SMS token. Only passcode or local authentication.
I need to implement an external authentication against LDAP somewhere...
Gunnar, do CISCO clearly says it is not able to participate to such setup?
So, my need would be to be able to insert in the flow an authentication in ISE against the LDAP.
The flow is:
WebApplication send login+password (LDAP) to ISE
ISE checks the credentials and if it is OK forward the request to VASCO
VASCO does not check for password but generate the OTP and send it via SMS
VASCO replies with a access-challenge
ISE forward the challenge to Web Application
WebApplication send login+OTP response to ISE
ISE forward to VASCO
VASCO checks for OTP and replies to ISE with accept
ISE forward to Web Application
User is logged in...
All the flow is working if the user enters a passcode
I would like to implement a Identity source sequences where the user is checked again all the entries not the first match
First LDAP then VASCO...

OEP install in Eclipse 3.4.2 fails with no repo for groovy bundle

I have Eclipse 3.4.2 on my Ubuntu box, and I tried to install OEP from <http://download.oracle.com/otn_software/oepe/ganymede> in the update manager.
It chugs for a bit, and then fails with:
No repository found containing: org.codehaus.groovy/osgi.bundle/1.5.7.20081120_2330
Any ideas on how to proceed with this?

David,
It's possible that the error you saw was due to a network glitch.
I just tried with a fresh install of eclipse-jee-ganymede-SR2-win32 with the update site you provided and it worked fine.
if you are interested we do have all-in one installers available with Ganymede SR2 + OEPE 1.1 or just the plugins zip which can be unzipped into the dropins folder at: http://www.oracle.com/technology/software/products/oepe/oepe_11g.html
cheers
Raj

Connecting to EMS fails with No mapping for the Unicode character exists in the target multi-byte code page

I am getting the following error when trying to connect to both my exchange servers.
New-PSSession : [ex2013-002.nafa.ca] Connecting to remote server ex2013-002.nafa.ca failed with the following error
message : No mapping for the Unicode character exists in the target multi-byte code page. For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:12
+ $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri ht ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : 1113,PSSessionOpenFailed
EMS used to connect ok. I am not sure if there is any connection but Outlook was installed recently on the exchange server to enable mailbox level backups.
Any help would be appreciated.
Steve Hurst

Hello Steve,
Firstly, you cannot install Outlook with Exchange because they share certain dll files.
About the EMS question, I suggest we try rebuilding the powershell virtual directory. If it still does not work, check the application log for more referernce.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Idoc failed with status 51 for Warning/Information messages

Hi All,
We are trying to create some Sales Orders with the help of Idocs. We are facing some problem as mentioned below.
1.There are some warning messages/information messages written in standard Sales Order User Exit USEREXIT_SAVE_DOCUMENT_PREPARE
2.As soon as the Idoc processing reaches any of these messages, it considers them as ERROR message and Idoc fails with the status as 51 which is not expected.
3.Also, I see that the Sales Order is saved with the data that has been passed in the Idoc.
Is this the standard behavior ?? (Or) Is there any EDI related configuration setting which can be used to suppress these kind of messages in Idoc Processing ??
Any help on this would be highly appreciated.
Thanks,
Babu Kilari

if your IDOC has status 51 then it is not posted, hence your sales order cannot be created from this IDOC. of course this error behaviour can be originated by the user exit.
please read OSS note Note 747631 - Some tips when testing idoc_input_orders

Download Manager - failing with error 400 Bad Request

Each time I try to download some patches from the download basket I get this error: The request failed: 400. Download Manager says the files are Partially Downloaded but the downloads never complete (they just cycle round one after another attempting each download before failing). The connection to SAP ssems to be made correctly (see trace file extract below)
I'm running JRE version 1.4.2_12; download manager ver 2.1.130. I've tried uninstalling & reinstalling JRE & download manager (numerous times). Does anyone have any suggestions about what might be the cause?
Thanks, Chris
PS - This is the relevant part of the trace file:
24-Aug-2007 09:29:06   Opening connection to 'https://smpdla.sap.com:443/00000084/217/KGPHA68.CAR?object_id=011000358700000405252007E&filepath=00000084\217\KGPHA68.CAR&uid=S0003245349'
24-Aug-2007 09:29:06   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:13   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:13   Response received: 400 Bad Request
24-Aug-2007 09:29:13   Response Http Headers:
24-Aug-2007 09:29:13      Server=AkamaiGHost
24-Aug-2007 09:29:13      Mime-Version=1.0
24-Aug-2007 09:29:13      Content-Type=text/html
24-Aug-2007 09:29:13      Content-Length=340
24-Aug-2007 09:29:13      Expires=Fri, 24 Aug 2007 08:28:49 GMT
24-Aug-2007 09:29:13      Date=Fri, 24 Aug 2007 08:28:49 GMT
24-Aug-2007 09:29:13      Connection=close
24-Aug-2007 09:29:13   Response code: 400
24-Aug-2007 09:29:18   Notifying subscribers of download state ...
24-Aug-2007 09:29:18   The download has terminated ...
24-Aug-2007 09:29:18   getUserProxy: true
24-Aug-2007 09:29:18   getEffectiveProtocol: http
24-Aug-2007 09:29:18   detected: http / https w/o proxy request
24-Aug-2007 09:29:18   SMPResponse::sendRequestNormal
24-Aug-2007 09:29:18   Opening connection to 'http://service.sap.com:80/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'
24-Aug-2007 09:29:18   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25   Redirecting to 'https://WEBSMP108.SAP-AG.DE/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'...
24-Aug-2007 09:29:25   getUserProxy: true
24-Aug-2007 09:29:25   getEffectiveProtocol: https
24-Aug-2007 09:29:25   detected: http / https w/o proxy request
24-Aug-2007 09:29:25   SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25   Opening connection to 'https://WEBSMP108.SAP-AG.DE/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'
24-Aug-2007 09:29:25   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25   Response received: 200 OK
24-Aug-2007 09:29:25   Response Http Headers:
24-Aug-2007 09:29:25      Date=Fri, 24 Aug 2007 08:29:02 GMT
24-Aug-2007 09:29:25      Server=Microsoft-IIS/6.0
24-Aug-2007 09:29:25      Content-Type=text/plain
24-Aug-2007 09:29:25      Content-Length=44
24-Aug-2007 09:29:25   getUserProxy: true
24-Aug-2007 09:29:25   getEffectiveProtocol: http
24-Aug-2007 09:29:25   detected: http / https w/o proxy request
24-Aug-2007 09:29:25   SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25   Opening connection to 'http://service.sap.com:80/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'
24-Aug-2007 09:29:25   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25   Redirecting to 'https://WEBSMP209.SAP-AG.DE/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'...
24-Aug-2007 09:29:25   getUserProxy: true
24-Aug-2007 09:29:25   getEffectiveProtocol: https
24-Aug-2007 09:29:25   detected: http / https w/o proxy request
24-Aug-2007 09:29:25   SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25   Opening connection to 'https://WEBSMP209.SAP-AG.DE/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'
24-Aug-2007 09:29:25   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:26   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:26   Response received: 200 OK
24-Aug-2007 09:29:26   Response Http Headers:
24-Aug-2007 09:29:26      Date=Fri, 24 Aug 2007 08:29:03 GMT
24-Aug-2007 09:29:26      Server=Microsoft-IIS/6.0
24-Aug-2007 09:29:26      Content-Type=text/html
24-Aug-2007 09:29:26      Content-Length=2416
24-Aug-2007 09:29:26   Number of URLs: 1
24-Aug-2007 09:29:26   Description lines: 56
24-Aug-2007 09:29:26   Adding HTTP1/1 Header: Range: bytes=0-*
24-Aug-2007 09:29:26   getUserProxy: true
24-Aug-2007 09:29:26   getEffectiveProtocol: https
24-Aug-2007 09:29:26   detected: http / https w/o proxy request
24-Aug-2007 09:29:26   SMPResponse::sendRequestNormal
24-Aug-2007 09:29:26   Opening connection to 'https://smpdla.sap.com:443/00000085/652/KGPHA69.CAR?object_id=011000358700000485532007E&filepath=00000085\652\KGPHA69.CAR&uid=S0003245349'
24-Aug-2007 09:29:26   Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:33   A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:33   Response received: 400 Bad Request
24-Aug-2007 09:29:33   Response Http Headers:

Yes - I've checked the address w're pointing to & have rechecked several times with our network people re: the proxy.
The trace seems to show that we're certainly making the initial connections to SAP OK - it just gives up after a few redirections.
Chris

VM Manager fails with "hardnofiles should be set to 8192 but was 0" error

Hello,
Running the installer and get
hardnofiles should be set to 8192 but was 0
I ran create oracle sh
./createOracle.sh
Adding group 'oinstall' with gid '54322' ...
groupadd: group oinstall exists
Adding group 'dba'
groupadd: group dba exists
Adding user 'oracle' with user id '54321', initial login group 'dba', supplementary group 'oinstall' and home directory '/home/oracle' ...
User 'oracle' already exists ...
uid=501(oracle) gid=501(dba) groups=501(dba)
Creating user 'oracle' succeeded ...
Verifying user 'oracle' OS prerequisites for Oracle VM Manager ...
oracle soft nofile 8192
oracle hard nofile 8192
oracle soft nproc 4096
oracle hard nproc 4096
oracle soft core unlimited
oracle hard core unlimited
Setting user 'oracle' OS limits for Oracle VM Manager ...
Altered file /etc/security/limits.conf
Original file backed up at /etc/security/limits.conf.orabackup
Verifying & setting of user limits succeeded ...
Modifying iptables
Adding rules to enable access to :
7001 : Oracle VM Manager http
7002 : Oracle VM Manager https
15901 : Oracle VM Manager VM console proxy
54321 : Oracle VM Manager core
Saving old iptables config file to /etc/sysconfig/iptables.ovmm
Here is
cat /etc/security/limits.conf
# /etc/security/limits.conf
* soft nofile 8192
* hard nofile 8192
* soft nproc 4096
* hard nproc 4096
* soft core unlimited
* hard core unlimited
oracle soft nofile 8192
oracle hard nofile 8192
oracle soft nproc 4096
oracle hard nproc 4096
oracle soft core unlimited
oracle hard core unlimited
I even rebooted, but have not been able to get around this. Any suggestions would be helpful...
Thanks!

It seems to look at 8192 and see 0?
[root@s08 oracle]# more /tmp/ovmm-installer.selfextract_wN8838/install-2011-08-31-155452.log
Traceback (most recent call last):
File "setup.py", line 31, in ?
installer.install(cfgFile, installersDir, uuid, installType, assumeYes)
File "/tmp/ovmm-installer.selfextract_wN8838/ovm/installer/installer.py", line 180, in install
self._verify_prerequisites()
File "/tmp/ovmm-installer.selfextract_wN8838/ovm/installer/installer.py", line 302, in verifyprerequisites
self.prerequisites.verifyGeneral()
File "/tmp/ovmm-installer.selfextract_wN8838/ovm/installer/prerequisites.py", line 64, in verifyGeneral
raise Exception("Prerequisite check failed ...")
Exception: Prerequisite check failed ...
ler INFO
08-31 15:54 ovm.installer.prerequisites INFO
08-31 15:54 ovm.installer.prerequisites INFO Verifying installation prerequisites ...
08-31 15:54 ovm.installer.prerequisites DEBUG * Checking if run by root user
08-31 15:54 ovm.installer.prerequisites DEBUG * Checking if OS is at least Oracle Linux version 5.5
08-31 15:54 system.process DEBUG system.process.start
08-31 15:54 system.process DEBUG system.process.run ended, exitcode was 0
08-31 15:54 system.process DEBUG system.process.run stdout:
unzip-5.52-3.el5
08-31 15:54 system.process DEBUG system.process.run stderr:
08-31 15:54 ovm.installer.prerequisites DEBUG * Checking if hostname is pingable
08-31 15:54 system.net DEBUG pingMachine s08.first4db.local, timeout=5, recheck=False
08-31 15:54 system.process DEBUG system.process.start
08-31 15:54 system.process DEBUG system.process.run ended, exitcode was 0
08-31 15:54 system.process DEBUG system.process.run stdout:
PING s08.first4db.local (127.0.0.1) 56(84) bytes of data.
64 bytes from s08.first4db.local (127.0.0.1): icmp_seq=1 ttl=64 time=0.020 ms
--- s08.first4db.local ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.020/0.020/0.020/0.000 ms
08-31 15:54 system.process DEBUG system.process.run stderr:
08-31 15:54 system.net DEBUG Machine with ip:[s08.first4db.local] is pingable
08-31 15:54 ovm.installer.prerequisites DEBUG * Checking if system has enough memory
08-31 15:54 system.fs DEBUG Opened file /proc/meminfo for reading
08-31 15:54 system.fs DEBUG Reading file /proc/meminfo
08-31 15:54 system.fs DEBUG File /proc/meminfo is closed after reading
08-31 15:54 system.fs DEBUG Opened file /proc/cpuinfo for reading
08-31 15:54 system.fs DEBUG Reading file /proc/cpuinfo
08-31 15:54 system.fs DEBUG File /proc/cpuinfo is closed after reading
08-31 15:54 ovm.installer.prerequisites DEBUG * Checking if the 'oracle' user and group exist
08-31 15:54 ovm.installer.prerequisites DEBUG * Verifying hardnofiles for user 'oracle'
08-31 15:54 system.process DEBUG system.process.start
08-31 15:54 system.process DEBUG system.process.run ended, exitcode was 0
08-31 15:54 system.process DEBUG system.process.run stdout:
open files (-n) 8192
08-31 15:54 system.process DEBUG system.process.run stderr:
08-31 15:54 ovm.installer.prerequisites INFO hardnofiles should be set to 8192 but was 0
08-31 15:54 ovm.installer.prerequisites DEBUG * Verifying /u01
08-31 15:54 ovm.installer.prerequisites INFO Configuration verification failed ...

Patch: CSCun25809, AnyConnect Password Management Fails with SMS Passcode for ASA 5520

Similar Messages

Maybe you are looking for