Patch Deployment with Grid Control

Hello *,
i tried to move a patch to a 9i database. My grid-control is installed on a laptop with w2k and is running fine. The patch should be deployed to another laptop with an installed 9.2.0.4 database. The job is starting and creates the new directory and subdirectory on the target host but then the job failed with the following message.
java.net.NoRouteToHostException: No route to host: connect
I found nothing in metalink, so where is the problem?
Greetz
Ulli

I think this is a windows related problem. It's not so easy to transfer files to a windows workstation, ftp normally does not work, unless a ftp server is running. The formal explanation of this error says, the target host cannot be reached because of router or firewall problems, but this may be misleading in this case. If you have a support contract (hopefully), you should open a TAR.

Similar Messages

PeopleSoft 8.52 Plug-in Implementation Guide for use with Grid Control

Per the Readme accompanying the download of PeopleSoft 8.52 Plug-in for use with Grid Control (11.1.0.1)-- "For the implementation reference guide, refer to "PeopleSoft Enterprise Environment Management Plug-in 8.52 for Oracle Enterprise Manager Implementation Guide" which you can download from Oracle Technology Network."
I don't seem able to find it.
Can anyone point me in the right direction?
TIA
Jeri

Duh, I was looking on the wrong site.

What are the prerequisites to monitor SAP ENVIROMENT with grid control

anybody know what are the prerequisites to monitor SAP ENVIROMENT with grid control
its necessary another software
thanks

There's currently no way to monitor a whole SAP system through gridcontrol. Of course you can monitor the underlying database.
Werner

Dataguard creation with Grid Control

hi all
i'm trying to create a physical standby database with grid control. (asm to asm)
after setting various properties in the wizard, grid goes on creating a broker config and when it gets to the step "preparing standby database creation" it fails with "ERROR: invalid username and/or password."
no more info on where it fails.
preciate if anyone has any tips on what to check.

Hi jstem,
thank you for your help
The initial status of the DATAGUARD is SUCCESS, and all is working fine with the BROKER.
The"Availability"=>"Dataguard Administration" page is correct, all the indications are right, except :
- Estimate Failover Time : Not available
Here is the output of 'Verify Data Guard Setup'
Initializing
Connected to instance srv-bdd02:PHOENIX
Starting alert log monitor...
Updating Data Guard link on database homepage...
Skipping verification of fast-start failover static services check.
Data Protection Settings:
Protection mode : Maximum Availability
Redo Transport Mode settings:
PHNXFIN: SYNC
PHNXENT: SYNC
Checking standby redo log files.....OK
Checking Data Guard status
PHNXFIN : Normal
PHNXENT : Normal
Checking inconsistent properties
Checking agent status
WARNING: No credentials available for target. srv-bdd01
Attempting agent ping ... OK
WARNING: No credentials available for target. srv-bdd02
Attempting agent ping ... OK
Checking applied log on PHNXENT...OK
Processing completed.
Yes, i've already investigated about credentials ...
ALL the credentials are OK for hosts, instance, agent, .... don't know where to add more credentials ....

How to monitor Oracle Glassfish with Grid Control 11g

Hi,
Could someone tell me how can i monitor Oracle Glassfish with Grid Control 11g ?? i think i need a plug-in but i don't know where could i download it
I guess the information i can monitor depends on the plug-in :)
Regards
Carlos

Hi Carlos,
We do have partners that routinely write plug-ins to extend OEM. If you take a look at the EM Extensibility Exchange below, you will find various extensions that partners such as Blue Medora have written:
http://apex.oracle.com/pls/apex/f?p=34841:1:26399399216901:::::
Please keep in mind though that between SLM and JVM diagnostics, you would have a significant amount of visibility even without the Glassfish target.
Cheers,
Glen

Can Oracle Application Diagnostics for Java used with Grid Control 10.2.0.3

I have installed Grid Control 10.2.0.3 in Solaris 10.
I was asked to install AD4J . Is it necessary to upgrade Grid Control to 10.2.0.4 for installing AD4J or can I use the present 10.2.0.3 version withour upgrading it ?

Hello.
We already have Grid Control 10.2.0.4 and just installed AD4J 10.2.0.4. This version of AD4J is not integrated with Grid Control, and can be setup on any server by unzipping the downloaded file (no installer). I did find the installation/configuration documentation lacking, but worked through it with a little help from Oracle Support.
The AD4J console has the look and feel of Grid Control, but is totally separate app with its own Apache server, etc.
Daren

Do I need license to patch agent through grid control deployment wizard

In grid control, we have license to use database diagnostics pack and database tuning pack.
I know wihtout license for provision pack, I cannot patch database homes using grid control deployment tab. But I'm wondering if I can patch grid control agent through deployment page without license for the prvision pack.
thanks

There is no management pack license needed for patching the agent. You can get clear details what link needs what packs when you click on '+' symbol (Show Management Pack Information) right to the "About Oracle Enterprise Manager" at the extreme down on OEM screen.
When you click on "Show Management Pack Information", it will show what pack needed next to every link in paranthesis. If there is no pack information mentioned next to link means, there is no license needed for that link.

Deploying oem grid control to e bussiness suites

We have installation of EBS R12, the AMP pack for EBS system is installed on the and already running. Now we want to use oem grid control to manage the EBS suites.
We have installed the eom 11G grid control and installed the application management pack patche (p8333939). How do we now deploy the enterprise manager grid control to EBS.
The documentation says agent needs to installed on the database tier and application tier and then discovered by the oem
Any idea on how to install the agent on the tier?

The platform is solaris 10. I have deploying to the database tier and the following errors is received
The question is there a special procedure to do this?
INFO: AgentPrereq:About to execute plug-in runRemoteCmd
INFO: AgentPrereq:The plug-in runRemoteCmd is running
INFO: AgentPrereq:Internal PlugIn Class: oracle.sysman.prov.deployment.plugins.plugins.RemoteCommandPlugin
INFO: AgentPrereq:Classpath =
SEVERE: AgentPrereq:oracle.sysman.prov.remoteinterfaces.exception.ClusterException: Error while running cmd /d01/oracle/agent/ADATMP_2011-
08-10_13-36-08-PM/ouiSetup -e -b /d01/oracle/agent -s /d01/oracle/agent/ADATMP_2011-08-10_13-36-08-PM/oui -p oui -u ADATMP_2011-08-10_13-3
6-08-PM/unzip -P solaris, on nodes 172.24.xxx.xxx.
SEVERE: AgentPrereq:Error ID : PROV-16011
SEVERE: AgentPrereq:Exception Stacktrace = oracle.sysman.prov.remoteinterfaces.exception.ClusterException: Error while running cmd /d01/or
acle/agent/ADATMP_2011-08-10_13-36-08-PM/ouiSetup -e -b /d01/oracle/agent -s /d01/oracle/agent/ADATMP_2011-08-10_13-36-08-PM/oui -p oui -u
ADATMP_2011-08-10_13-36-08-PM/unzip -P solaris, on nodes 172.24.xxx.xxx
at oracle.sysman.prov.remoteinterfaces.nativesystem.NativeSystem.runCmdOnNodes(NativeSystem.java:1244)
at oracle.sysman.prov.remoteinterfaces.clusterops.ClusterBaseOps.runCmdOnNodes(ClusterBaseOps.java:279)

Help with grid control survey....

I have to follow a grid control project, their company have AD,exchange plugin. I have to make a survey before deploying but i dont know how to ask some necessary questions to collect information, this the first time i have to do this.... I need a help, please help me. thanks
Regards
DzũngTQ.

I went through a similar upgrade from 10.2.0.3GC/10.1.0.4 repository to 10.2.0.5GC/11.1.0.7 repository. What you have to make sure is that your configuration remains certified. So, given that 10.1.0.4 repository is certified against newer versions of GC, you can upgrade from 10.2.0.1 to 10.2.0.5 for GC first. Then upgrade your repository to the latest version, you can go with 10.2.0.4 or 10.2.0.5 or even 11.1.0.7.
HTH

How to use stored script from with Grid Control 10gR2

HI
My backup method uses a stored script in the recovery catalog that is separated from Grid Control's repository database.
In Scheduled Backup, there is no way to connect to recovery catalog; let alone use stored script. Is that true?
Thanks,
Kevin

it works, here is a test case , I use this functionality a lot
$connected from HOST
rman target / catalog <mycatalog>
connected to target database: TOPAZ (DBID=3348250252)
connected to recovery catalog database
RMAN> create script testbackup
2> {backup current controlfile;
3> }
created script testbackup
RMAN> run {execute script testbackup;}
executing script: testbackup
Starting backup at 12-JUN-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=217 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=251 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=200 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=337 devtype=DISK
allocated channel: ORA_DISK_5
channel ORA_DISK_5: sid=182 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
channel ORA_DISK_1: starting piece 1 at 12-JUN-07
channel ORA_DISK_1: finished piece 1 at 12-JUN-07
piece handle=/rman_backup/d_TOPAZ_s_12344_p_1_t_625077001 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
Finished backup at 12-JUN-07
Starting Control File and SPFILE Autobackup at 12-JUN-07
piece handle=/rman_backup/c-3348250252-20070612-06 comment=NONE
Finished Control File and SPFILE Autobackup at 12-JUN-07
NOW in grid control I have configured my Recovery catalog settings, check for OS username , that should be owner of oracle home for recover catalog
I schedule a RMAN backup job with these parameters in script
{execute script testbackup;}
Status          Running
     Step ID          203585
     Targets          topaz.ucas.ac.uk
     Started          12-Jun-2007 16:34:56 (UTC+01:00)
     Step Elapsed Time          1 minutes, 37 seconds
     Management Service          stardb1:4889_Management_Service
     TIP      Management Service from which the job step was dispatched.
Output Log
Recovery Manager: Release 9.2.0.6.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
connected to target database: TOPAZ (DBID=3348250252)
RMAN>
connected to recovery catalog database
RMAN>
echo set on
RMAN> {execute script testbackup;}
2> exit;
executing script: testbackup
Starting backup at 12-JUN-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=164 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=134 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=22 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=198 devtype=DISK
allocated channel: ORA_DISK_5
channel ORA_DISK_5: sid=145 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
channel ORA_DISK_1: starting piece 1 at 12-JUN-07
channel ORA_DISK_1: finished piece 1 at 12-JUN-07
piece handle=/rman_backup/d_TOPAZ_s_12346_p_1_t_625077300 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 12-JUN-07
Starting Control File and SPFILE Autobackup at 12-JUN-07
piece handle=/rman_backup/c-3348250252-20070612-07 comment=NONE
Finished Control File and SPFILE Autobackup at 12-JUN-07
null

Monitoring with Grid Control : Default thresholds

Hi,
I have installed Grid Control 10GR2, and have been struggling with the monitoring the health of Enterprise databases. Previously, any critical health problem seemed to have been reported promptly..
The default time interval in Grid Control is too long for certain health issues.. like
database up-down, tablespace full...
I just wanted to get idea from others, what have they done with the time intervals?
Any suggestions/experiences??
- Jayant

I've kept the defaults on most things, I have changed a few things, notably a metric on the agent itself. But all databases self manage their space anyway. tablespace full you can just change to 5 minutes or something if you are concerned about it.Just experiment, everybodys requirements are different.
And for the other chap to change a time interval on grid control 10.2:
Go to Targets-->All Targets
Click on the name of the target you want to change (be it host/database or agent etc)
Scroll down the page and click on 'Metric and Policy Settings'
There you will see the collection schedule for each metric, this a clickable link from where you can then edit.
Alternatively use a monitoring template and do it that way, especially if you got lots to change.
Bazza

Patch deployment with status "Enforcement state unknown"

Hi All
I am pretty new to the patch deployment.
I generated a report and see there is Last State column with "Enforcement state unknown", not sure if it means failed for those hostnames or will be retried for the installation.
Kindly clarify.
Regards
Ramesh
Regards Ram

They will only start to install updates automatically when there is an active update deployment with a scheduled deadline that has past. See for a lot more information:
http://technet.microsoft.com/en-us/library/gg682168.aspx#BKMK_SUMCompliance
Also, when Days since last communication is more than 0, that's usually an indication that the client is not communicating any more. That can be caused by a lot of things including something simple as that the device is turned of, or not
connected with the network.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Version of agents that can be deployed for grid control 10.1.0.2 on Win2k

We have the 10.1.0.2 grid control installed on a AIX 5.2 server.
We would like to manage targets residing on windows 2000 platforms with this grid control installation.
I would like to understand which version of agent should we be installing on the windows platforms, for them to be managed by the grid control. Does the version of the agent have to be the same as the grid control installation?

Thanks for the update. I checked the other thread, but my question was more about exact 10g versions of the agent and the grid console.
I want to know if a 10.1.0.4 or 10.1.0.3 agent will be able to talk to a 10.1.0.2 grid console.
I had one more question about the downloadable 10g agent for Windows 2000. As of now under http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html
I see the downloadable agent only for Windows NT. Does this work for Windows 2000 as well.
I would appreciate if anyone could throw a light on this.

Emca -config dbcontrol db fails with grid control error

hi friends
i am using oracle 11.2.0.2.0 in windows xp 32 bit
while i was trying to config the EM with the command
emca -config dbcontrol db
i am getting the following error
The existing database you have specified has Grid Control repository.This operation is not supported.
what should i do as i tried everything like i stopped the gridcontrol services already
with regards
saugat

Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : accessdba
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: accessdba
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Jul 28, 2011 6:23:23 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: D:\app\saugat\product\11.2.0\dbhome_1, and user: SYS
Jul 28, 2011 6:23:27 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Jul 28, 2011 6:23:27 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: Spooling to D:\app\saugat\cfgtoollogs\emca\orcl\emca_repos_create_2011_07_28_18_23_27.log
Jul 28, 2011 6:23:27 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMReposConfig createRepository
WARNING: ORA-25153: Temporary Tablespace is Empty
ORA-06512: at line 37
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at D:\app\saugat\cfgtoollogs\emca\orcl\emca_repos_create_<date>.log for more details.
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at D:\app\saugat\cfgtoollogs\emca\orcl\emca_2011_07_28_18_15_19.log for more details.
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error creating the repository
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:252)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:160)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
     at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:599)
     at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1482)
     at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:583)
     at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:529)
Jul 28, 2011 6:34:32 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to D:\app\saugat\product\11.2.0\dbhome_1\oui
it shows thaat temp tablespace is empty

Manualy onfigure database with grid control

Hi All,
I am using EM grid control 10g r4 to monitor many of the 9i and 10g databases in the environment.
Need help in this scenario.
On a db server (10.2.0.2) I have grid control agent (10.2.0.4) installed and able to monitor databases on it.
Recently my colleague created a new database with ’local EM database control’ instead of using centralized grid control. In this case how can I manually configure this new database to point to EM grid control.
Please let me know
~Thanks

You can attempt a rediscovery from within Grid Control.
On the server where you want to discover the target database set the ORACLE_HOME to the agent home and then execute:
agentca -d
This should rediscover and find your database.

Patch Deployment with Grid Control

Similar Messages

Maybe you are looking for