Patch Details for Jdev10g

Hello,
I have installed Jdev10g, to use it for OAFramework, please let me know the patch needed for R12 customization/extension.
Thanks!

<address>Rakesh,</address>
<address>If your Instance version is R12.0.0, then the patch is correct.</address>
<address>For more details check the metalink note 416708.1.</address>
<address>Thanks.</address>
<address>With Regards,</address>
<address>Kali.</address>
<address>OSSI.</address>

Similar Messages

  • How to chk the patch details for BEx Analyser

    Hello Friends,
    Could you please tell me how to chk the patch details for BEx Analyser
    Thanks,
    Srini

    Hello again,
    Search for a file in your computer named "BExAnalyzer.xla".
    Right-click on it and choose "Properties".
    Go to the third tab named "Custom".
    You'll see below on that tab a place called "properties" with the version.
    There you go.
    Diogo.

  • CPU, Security, One of Patches Details for e-business suite

    Friends -
    Need valuable information for anyone on this below patch details.
    CPUs - Quarterly – one Quarter behind >>> Database 10.2.0.3
    Security Patches – >>>> Database 10.2.0.3 and E-Business Suite 11.5.10.2
    One off patches – >>>> E-Business suite 11.5.10.2
    Please advise on this.
    Regards
    satish

    Hi,
    The recommended patches for Oracle Apps 11i can be found at:
    Note: 123456.1 - Latest 11i Applications Recommended Patch List
    Note: 244040.1 - Oracle E-Business Suite Recommended Performance Patches
    For CPU patches, please refer to:
    Note: 880170.1 - Oracle E-Business Suite Releases 11i and 12 Critical Patch Update Knowledge Document (October 2009)
    Note: 790259.1 - How To Get Guidance on Applying the CPU/Critical Patches on 11.5.10 environment ? Upgrade To Rollup 6?
    Regards,
    Hussein

  • Current Patch Set for Oracle Database Release 11.2

    Hi
    I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
    I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
    Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
    I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
    or
    I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

    Abu Al MAmun,
    I understand from your posts that you recently upgraded to 11.2.0.2.
    I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
    Thanks,
    Siri
    Hello Everyone,
    I did read the post on to how you have to install the current patch set for 11.2.
    But honestly, it pretty much flew over my head.
    I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
    And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
    This is what I have right now:
    1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
    2) Database Patches -->Oracle 11.2.0.2 -->
    All they have here is
    a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
    b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
    c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
    If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
    But I did not find the currrent patch set 11.2.0.2.
    Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
    Thank You!
    Siri

  • Patch 8290549 for oracle 9.2.0.8

    Hi,
    I need to install April patch 8290549 for oracle 9.2.0.8 but have some doubts if it
    is cumulative patch and if it is include Jan patch.
    I will appreciate if someone could help with the two questions below.
    Is April patch 8290549 for oracle 9.2.0.8 is cumulative patch ?
    Is it include January patch 7592365 ?
    Thank You,
    Ronen

    All CPUs released by Oracle are cumulative i.e. they include all the fixes from the first CPU released for a particular release (f.ex. 9.2.0.8) till the current one.
    The Readme for the patch itself has following lines
    <quote>
    Critical patch update (CPU) patches are cumulative, which means fixes from previous Oracle security alerts and critical patch updates are included. It is not required to have previous security patches applied before applying the CPUApr2009 patches. However, you must be on the stated patch set level for a given product home before applying the CPUApr2009 patches for that release.
    <quote>
    Edited by: Satish Kandi on May 27, 2009 8:54 PM
    Added Readme details.

  • Patch List for Self-Service Human Resources (SSHR) in HRMS 11i

    Friends -
    We are planning to implement Self-Service Human Resources in HRMS 11i. I am able to find out information using metalink note : Recommended Patch List for Self-Service Human Resources (SSHR) in HRMS 11i [ID 108897.1].
    As per note : 108897.1 there are bunch of patch details i am not sure which patch i need to apply currently we are on oracle apps 11.5.10.2 with Rup5
    SQL> SELECT
    2 BUG_NUMBER, DECODE(BUG_NUMBER,9062727,'K RUP5' ,7666111,'K RUP4' ,6699770,'K RUP3' ,5337777,'K RUP2',5055050,'K RUP1',3500000,'K',3333633,'J',3140000,'I',3233333,'H', 3116666 ,'G', 2968701, 'F'
    3 ,2803988, 'E','Unknown')
    4 FROM AD_BUGS
    5 WHERE BUG_NUMBER IN ('9062727','7666111','6699770','5337777','5055050','3500000','3333633','3140000','3233333','3116666','2968701', '2803988')
    6 and rownum=1
    7 order by 1 desc
    8 ;
    BUG_NUMBER DECODE(
    5337777 K RUP2
    Please let me know which patches i need to apply for SSHR as per metalink note : 108897.1
    Regards
    VSH

    Hi,
    I agree. However, I understand that the Patches search in My Oracle Support website mentions that the RUP patch is included in the next RUP patch available.
    Please note that you need to consider also the patches in the following documents on top of RUP 5.
    Note: 1075477.1 - Known Issues on Top of Patch 9062727 11i.HR_PF.K.DELTA.5 (11i HRMS RUP 5)
    Note: 1096417.1 - Applied Patch 9062727 (11i.Hr_pf.K.Delta.5) And Left With FFP<######> Invalid Packages
    Thanks,
    Hussein

  • J2ee system info displays incorrect patch details

    Hello all,
    I did an un-deployment of a few custom applications in visual admin in the deploy node.
    Later I did and re deployment using the visual admin.
    Now when I check in Visual admin it show me the newly deployed applications detail.
    But when I check them in system info it is showing me the old patch details.
    The deployment files were of .ear files.
    Unfortunately, Due to some issues I was not able to deploy using the SDM.
    The J2EE system info is not showing the updated patch details.
    Kindly help me to figure out what could be the issue.
    Thanks.
    Regards,
    Chandru

    Hello Benny,
    I have a query here... If deployment should happen only through SDM then why does an deploy option made available in visual admin.
    I am just curious to know why this option....??
    Thanks for your reply... I have also planned to do the deployment again using SDM.
    Thanks.
    Regards,
    Chandru

  • Database tables holding details for a non - released transport request

    Dear All,
    We are implementing SAP ECC 6.0 u2013 ABAP stack, on IBM iSeries / System i, i5/OS V5R4 -
    SAP kernel release 7.00, kernel patch number 173
    Could someone please guide me to the database tables holding the details for a non u2013 released transport request.
    The problem is the following :
    We encountered some data corruption in the database of our development system, so we did a restore from the previous day's backup (RSTLIB  command) for the database library : R3DEVDATA, without restoring the /usr/sap/trans  directory, then we did an APYJRNCHG command for the journal receiver spanning from the previous day's backup until the corruption time (remote journal on a remote system.)
    We are now facing the following conflict :
    One of our programmers is now un-capable of updating an ABAP program, which he previously added in a transport request, which he did not release.
    ( This was done during the day of the data corruption)
    When the programmer is trying to update the ABAP program through the ABAP workbench, he receives the error :
    'Request lock on non u2013 existent task / request DEVK921426'
    No details for the transport request DEVK921426 exist in either of the two directories :
    /usr/sap/trans/data   , /usr/sap/trans/cofiles
    The way I see to solve this conflict (eliminate this lock) is to delete the different entries related to the un-released transport request from the database tables.
    Any clues would be highly appreciated.
    Thank you in advance for your cooperation.
    Best regards.
    Reda Khalifa

    Dear Volker,
    Thank you very much for your interest.
    The transport request of interest did not appear in transaction code SE03
    Eliminating the record from table TLOCK indeed did solve the problem.
    Thank you again.
    Best regards.
    Reda Khalifa

  • How to find out SAP J2EE Patch Level for 04s

    Hi all
    I want to find out SAP J2EE Patch Level for 2004s installation i tried to get information from SYSTEM INFORMATION link on WAS homepage but it gave only version :7.00 details and PATCH LEVEL was not mentioned .
    I also tried to find out by looking into VERSION.TXT file for server & dispatcher in ....USR\SAP\J2E.....engine installation but again no details about PatchLevel was mentioned can anyone provide some information regarding what is the  PatchLevel  for WAS 7.0 , J2SE used is 1.4.2_09
    Thanks in Advance !!
    Asif

    Thanks Kenny ,
    But as you can see from version.txt  file for Server0 it does not mention PatchLevel it is
    blank
    Specifies the version of the system
    Cluster-Version: 7.00   PatchLevel 
    Build-On:Thursday, March 23, 2006 18:47 GMT
    Perforce-Server:
    Project-Dir:JKernel/645_VAL_REL
    JKernel Change-List:102557
    Build machine:SAPInternal
    Build java version:1.3.1_12-b03 Sun Microsystems Inc.
    SP-Number: 07
    Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
    i also checked version.txt for dispatcher it is as below
    Specifies the version of the system
    Cluster-Version: 7.00   PatchLevel 
    Build-On:Thursday, March 23, 2006 18:47 GMT
    Perforce-Server:
    Project-Dir:JKernel/645_VAL_REL
    JKernel Change-List:102557
    Build machine:SAPInternal
    Build java version:1.3.1_12-b03 Sun Microsystems Inc.
    SP-Number: 07
    Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
    I tried this on different 2004s server but the Patch Level is not mentioned whereas for 2004
    servers it is mentioned
    so can u give some inference based on above descriptions about What should be SAP J2EE Patch
    Level for the 2004s servers
    Regards !!
    Asif

  • Patch details in Weblogic logs

    We applied weblogic patch HCE9 provided by Oracle, but we are not able to view the details in in the startup logs (usually patch details show up on the startup logs). Its not visible via the admin console also. Does anyone know why?

    Thanks for replying .... We use Weblogic 9.2 MP3
    Also, we used BSU utility fir applying the patch. We can see the patch from BSU tool, but its not written in the logs or neither is it showing up in Admin console

  • Patch Details....

    Gurus...
    Can any one help me in finding all the patch Details which are applied on Oracle through a Query..... /????

    Thanks for the response....
    But please let me know the command for WINDOWS...That IS the command for Windows!
    Please consider looking through the
    Oracle® Universal Installer and OPatch User's Guide
    10g Release 2 (10.2) for Windows and UNIX
    for more information.

  • Error!! Can not find the delivery details for the delivery Id :

    hi all,
    I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
    Error!! Can not find the delivery details for the delivery Id :
    hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
    Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
    I am not sure whats causing the issue and why i am not getting complete bursted files out.
    Please suggest
    Thanks
    Ronny

    I guess, you are in 10.1.3.3.2 :),
    in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
    check th release notes
    can you send me the xml and bursting query you have, i can try simulating in my local.

  • I want to know that if i want to download facebook on my iphone 4 or any other apps then it ask me put my card details for payment. why is that. if they are free then why do i need to give my card details?please help me anyone.

    I want to know that if i want to download facebook on my iphone 4 or any other apps then it ask me put my card details for payment. why is that. if they are free then why do i need to give my card details?please help me anyone.

    Just select no credit card as outlined here:
    http://support.apple.com/kb/ht2534

  • Plant Stock details for a given date

    At present we are using MB52 for latest stock position of a plant. Is there any code for getting stock details for earlier date.
    As we are facing lot of problems while audits....

    Hi
    Please check the following link
    Re: No stock showing in Inventory on date stock report
    Cheers
    Chandra

  • Displaying/Printing Sub-group Details for Each Parent Group

    My question is based on the example code provided under the "Creating an RTF Template" chapter of the Oracle Business Intelligence Publisher Report Designer's Guide, Release 10.1.3.4, Part Number E12187-01. I modified that example as follows:
    <?xml version="1.0" encoding="WINDOWS-1252" ?>
    - <VENDOR_REPORT> -
    - <LIST_G_VENDOR_NAME>
    - <G_VENDOR_NAME>
    <VENDOR_NAME>COMPANY A</VENDOR_NAME>
    - <LIST_G_INVOICE_NUM>
    - <G_INVOICE_NUM> --TRANS_TYPE
    <SET_OF_BOOKS_ID>124</SET_OF_BOOKS_ID>
    <GL_DATE>10-NOV-03</GL_DATE>
    <INV_TYPE>Standard</INV_TYPE>
    <INVOICE_NUM>031110</INVOICE_NUM>
    <INVOICE_DATE>10-NOV-03</INVOICE_DATE>
    <INVOICE_CURRENCY_CODE>EUR</INVOICE_CURRENCY_CODE>
    <LIST_G_LINE_ITEM>
    - <G_LINE_ITEM>
    <LINE_ITEM_NUM>01</LINE_ITEM_NUM>
    <LINE_ITEM_DESC>WIDGETS</LINE_ITEM_DESC>
    <DATE>10-NOV-03</DATE>
    <PROD_ID>882P</PROD_ID>
    <QTY>50</QTY>
    <UNIT PRICE>3.0</UNIT_PRICE>
    <TOT_AMT>150</TOT_AMT>
    </G_LINE_ITEM>
    - <G_LINE_ITEM>
    <LINE_ITEM_NUM>01</LINE_ITEM_NUM>
    <LINE_ITEM_DESC>STUFF</LINE_ITEM_DESC>
    <DATE>10-NOV-05</DATE>
    <PROD_ID>725P</PROD_ID>
    <QTY>20</QTY>
    <UNIT PRICE>5.0</UNIT_PRICE>
    <TOT_AMT>100</TOT_AMT>
    </G_LINE_ITEM>
    - <G_LINE_ITEM>
    <LINE_ITEM_NUM>01</LINE_ITEM_NUM>
    <LINE_ITEM_DESC>WIDGETS</LINE_ITEM_DESC>
    <DATE>10-DEC-05</DATE>
    <PROD_ID>882P</PROD_ID>
    <QTY>5</QTY>
    <UNIT PRICE>4.0</UNIT_PRICE>
    <TOT_AMT>20</TOT_AMT>
    </G_LINE_ITEM> </LIST_G_LINE_ITEM>
    <ENT_AMT>122</ENT_AMT>
    <ACCTD_AMT>122</ACCTD_AMT>
    <VAT_CODE>VAT22%</VAT_CODE>
    </G_INVOICE_NUM>
    <G_INVOICE_NUM> --TRANS_TYPE
    <SET_OF_BOOKS_ID>124</SET_OF_BOOKS_ID>
    <GL_DATE>10-NOV-03</GL_DATE>
    <INV_TYPE>Standard</INV_TYPE>
    <INVOICE_NUM>031110</INVOICE_NUM>
    <INVOICE_DATE>10-NOV-03</INVOICE_DATE>
    <INVOICE_CURRENCY_CODE>EUR</INVOICE_CURRENCY_CODE>
    <ENT_AMT>122</ENT_AMT>
    <ACCTD_AMT>122</ACCTD_AMT>
    <VAT_CODE>VAT22%</VAT_CODE>
    </G_INVOICE_NUM>
    </LIST_G_INVOICE_NUM>
    <ENT_SUM_VENDOR>1000.00</ENT_SUM_VENDOR>
    <ACCTD_SUM_VENDOR>1000.00</ACCTD_SUM_VENDOR>
    </G_VENDOR_NAME>
    </LIST_G_VENDOR_NAME>
    <ACCTD_SUM_REP>108763.68</ACCTD_SUM_REP>
    <ENT_SUM_REP>122039</ENT_SUM_REP>
    </VENDOR_REPORT>
    In my XML file example there are multiple invoices for each vendor as subgroups under the <G_VENDOR_NAME> group. So that multiple <G_INVOICE_NUM> subgroups maybe embedded under the <G_VENDOR_NAME> group element. I would like to create a schedule (table) displaying line item details for each vendor and invoice number. Using the simplified syntax, I'm having problems displaying the line item details for each invoice. Instead I’m only able to display a single line item for each invoice. Unfortunately my example report cannot be uploaded and "Thread" text does not seem to accurately retain blank spaces. So descriptively the report would have a line for vendor name, separate line for group number, and lne item details displaying consectively by line to the right
    COMPANY A: Vendor Number: ##
    Invoice Number LINE_ITEM_DETAILS
    LINE_ITEM_DETAILS
    LINE_ITEM_DETAILS
    Invoice Number LINE_ITEM_DETAILS
    LINE_ITEM_DETAILS
    LINE_ITEM_DETAILS
    Please ignore the data details of my example report. The values do not exactly match the XML data example above. Based on my XML example, please provide a RTF template marked with the XLS or simplified syntax approach to get my results.
    Thanks.

    Make 2 contacts with an email address each rather than 1 contact with 2 addresses.

Maybe you are looking for

  • How can I print a html table and preview it?

    Hi there! Please help me. I spent a lot of time to find how to print a html table and preview it. I tried use code of the book http://www.manning.com/sbe/ Chapter 22. But this book consists only code for rtf and they change size of JtextPane before p

  • TS4147 How do I resolve duplicates resulting from contacts created from different accounts?

    I have duplicate contacts in my address book. I discovered by merging that the duplicate contacts were created from different accounts. How do I ID the account the contact was created from? Note: the duplicates are in my address book only. I do not h

  • Meet The Expert Session 2 with Joe Ambeault only 15 minutes left

    Hi, Everybody, Just wanted you to know Joe will be here on our Meet The Expert session live for 15 more minutes. Thank you for the great participation!

  • .Tiff files show as RAW files

    I have an Olympus C-770 Ultra Zoom and have just shot some .Tiff files and loaded them into my 5th G. iPod via the Apple camera connector. They have shown up as RAW files for some unknown reason so I can't view them on the iPod. What is going on and

  • IPod Shuffle Won't Switch Playlists

    When I hold down the center button and try to select a new playlist I don't get a tone before each playlist is announced so therefore when I select the playlist I want to hear, it doesn't do anything. Has anyone had this problem before? I am soooooo