Patch Fails: 119907-13 Gnome 2.6.0_x86: Virtual File System Framework patch

When I try to use my Sun(TM)Update Manager, I get:
119907-13 Gnome 2.6.0_x86: Virtual File System Framework patch Failed.
Utility used to install the update failed with exit code 997. Patch is not available in the patch directory.
It is the only patch left to be installed and I tried rebooting several times with no luck. There is no 119907-13 directory or 119907-13.jar in my /var/sadm/spool either. Thanks for any hints.
--Bob

Thanks.
I have the free version of Solaris for the x86/x64 platform on my workstation at home. I did register the OS when I installed it, but I do not have a support contract.
I am curious as to why this has never been an issue before with the hundreds of patches I've installed previously.
If I do not wish to purchase a support contract, there ought to be a way to get the patch out of my Sun(TM) Update Manager so that the green indicator in my
systray doesn't drive me nuts.
Thanks for your help and any further suggestions.
--Bob

Similar Messages

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

Disk Utility can't format my external HD - File System Formatter fails

Hi. I have a Freecom 1.5TB external hardrive that is connected by firewire to my Intel iMac. The drive has worked fine for a year and then suddenly the "error 36 code" appeared and nothing else could be saved to the drive.
Disk Utility told me that it could not repair the disk and that I should format it. At this stage the problems start!
DU fails to format the drive with the error "File System Formatter Failed."
I have read various conversations on this error on these forums and followed the instructions but nothing has worked. I have already
1) Partioned the disk making sure it is "GUID" - then formatted and it still fails
2) Used MS DOS to do it but that also fails.
I have noticed that the SMART status is "not recognised".
Is there anything else that I can do or am I just doing this wrong? I am thinking that I might be able to do something using the start-up disks but I don't know how to do that and don't want to jepardise my iMac whichis otherwise working fine!
Any help appreciated.
Rob

I went crazy last night with the same issue trying to format my Toshiba external drive. I could format as MSDOS but not Mac journaled. I tried the guid partition scheme etc... no luck. Then I read somewhere that Leopard has an issue with the partitioning schemes. I hooked it up to my macbook on Tiger and whalla, formatted no problem. Then I was able to hook it up to Time Machine and let it reformat it on my Snow Leopard version of OSX on the iMac. I'm on OSX 10.6.8.

Error message "file system formatter failed"

Hi
I just bought a MyBook 1TB external drive to use as a vault for Aperture. It comes formatted FAT32, however, it appears you can't use FAT32 for vaults. So I have tried to reformat it to MacOS extended, and MacOS extended journaled, however it fails after a few seconds with the message "File system formatter failed".
I am using Leopard, iMac20", 2.33ghz intel core 2 duo, 2gbRam. Any ideas , or is there some other third party software I could try?
thanks

Open up Applications / Utilities / Disk Utility.
In the column on the left there will be several lines for each storage device that presents itself to the system as a "disk". The first such line for any drive names the manufacturer and describes the drive hardware. That's the hardware description line.
Now a hard drive might be partitioned into several "logical volumes", each of which looks like a separate disk to the operating system. Each of those will be listed just under the hardware line for each of your drives -- indented a bit.
For drives that support removable media (such as your DVD drive), there will only be a volume line if there is currently media inserted in the drive.
Your main hard drive, the one you boot from, likely is partitioned into only one volume so there will only be one line following the hardware line and it will bear the name of your boot disk -- most likely "Macintosh HD".
Click on the hardware line to see the partitioning information for that particular physical disk drive at the bottom of the window.
Click on one of the volume lines indented below it (e.g., the "Macintosh HD" line) to see how that particular volume is formatted in its particular partition of the physical disk drive.
Partitioning is how the total physical space on the disk drive is divided and organized into one or more logical volumes. Formatting is how a given logical volume is structured for use by the operating system.
For PowerPC based Macs, the "default" partitioning should be Apple Partition Map (APM). For Intel based Macs the "default" partitioning should be GUID.
In either case, the "default" formatting should be Mac OS X Extended (Journaled).
--Bob

Aperture 3 fails to open Leica D-Lux 6 RAW files

Aperture 3 fails to open Leica D-Lux 6 RAW files. Any patch coming soon?

Sorry, but we don't know. This is a "User to User" forum - you are not talking to Apple.
You might consider to import "raw&jpeg" while you are waiting, so you will have the raw available, when the raw support will be released.
Or use the software, that came with your camera, to develope the raw and import tiff to Aperture, while you are waiting.
Regards
Léonie

Zone install file system failed?

On the global zone, my /opt file system is like this:
/dev/dsk/c1t1d0s3 70547482 28931156 40910852 42% /opt
I am trying to install it in NMSZone1 like this config:
fs:
dir: /opt
special: /dev/dsk/c1t1d0s3
raw: /dev/rdsk/c1t1d0s3
type: ufs
options: [nodevices,logging]
But failed like this:
bash-2.05b# zoneadm -z NMSZone1 boot
zoneadm: zone 'NMSZone1': fsck of '/dev/rdsk/c1t1d0s3' failed with exit status 3
3; run fsck manually
zoneadm: zone 'NMSZone1': unable to get zoneid: Invalid argument
zoneadm: zone 'NMSZone1': unable to destroy zone
zoneadm: zone 'NMSZone1': call to zoneadmd failed
Please help me. Thanks.

It appears that the c1t1d0s3 device is already in use as /opt in the
global zone. Is that indeed the case? If so, you need to unmount
it from there (and remove or comment out its entry in the global
zone's /etc/vfstab) file and then try booting the zone again.

Failed to load database information. Error in File temp_

Our environment:
Windows Server 2012 R2 Data-center Edition 64 bit
Visual Studio Pro 2013 Version 12.0.3.30110.00 Update 1
.Net 4.5.51641
Crystal Reports for VS 2013 V13.0.9.1312
Oracle ODAC 11.2.0
We created a winform application to generate a form letter report that runs fine within the IDE. When we build the the exe and copy it from the project folder to a folder on the C:\drive of this same pc and try to execute it we get these error messages (partial list);
CrystalDecisions.CrystalReports.Engine.DataSourceException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information. ---> System.Runtime.InteropServices.COMException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information.
   at CrystalDecisions.ReportAppServer.Controllers.DatabaseControllerClass.ReplaceConnection(Object oldConnection, Object newConnection, Object parameterFields, Object crDBOptionUseDefault)
   at CrystalDecisions.CrystalReports.Engine.Table.SetDataSource(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataSet dataSet)
   at cr3Test.Form1.Form1_Load(Object sender, EventArgs e)
Here is the app:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
        Dim crReportDocument As New CrystalReport3()
        Dim DataSet1 As DataSet
        Dim adoOleDbConnection As OleDbConnection
        Dim adoOleDbDataAdapter As OleDbDataAdapter
        Dim connectionString As String = ""
        connectionString = "Provider=OraOLEDB.Oracle;"
        connectionString += "Data Source=ourdb;"
        connectionString += "User ID=ouruserid;Password=ourpsw"
        adoOleDbConnection = New OleDbConnection(connectionString)
        Dim sqlString As String = "select * from TEMP_FRI_LETTERS"
        adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
        DataSet1 = New DataSet()
        adoOleDbDataAdapter.Fill(DataSet1, "TEMP_FRI_LETTERS")
        'Dim xmlPath As String = "C:\Temp\test.xml" ' use these two statment s to verify dataset works
        'DataSet1.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
        crReportDocument.SetDataSource(DataSet1)
        crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
        crReportDocument.Refresh()
        crReportDocument.PrintToPrinter(1, False, 0, 0)
        DataSet1.Dispose()
        adoOleDbDataAdapter.Dispose()
        adoOleDbConnection.Close()
        adoOleDbConnection.Dispose()
        crReportDocument.Dispose()
        Me.Close()
    End Sub
End Class
Here is the app.config:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
    <startup useLegacyV2RuntimeActivationPolicy="true">
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
    </startup>
    <system.windows.forms jitDebugging="true" />
</configuration>
We have the CPU set to x86 as we are ultimately trying to generate a 32 bit app for XP and Win 7. We only installed the 32 bit run time on this pc because we have no intention of going to 64 bit apps on the clients. Are there additional dlls or something that has to be installed in the same folder as the exe on this development machine.
Bruce

Looking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
Failed to load database information. Error in File temp_
From the above we found this:
1. the app.exe.config is all in one package which cannot be separated with the EXE file.
2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
We still need to test on Server 2008 R2 but we are hopeful when that time comes.
Thanks.
Bruce

Crystal Report failed scheduling onto the File System

Hi,
We have set up a Crystal report file for scheduling via file system. This report has been running fine with regards to generation all through last few months, but has started failing to generate the report at the scheduled time onto the file system from the last few days. When I checked the logs of the Instance Manager, it shows an error like this 'Unable to connect: incorrect log on parameters. Details: [Database Vendor Code: 1017 ]'.
Please note, I was able to run the report from InfoView without any issue, so I don't believe there is any issue with stored procedure/report/database connection but something else.
Can someone please provide some insights on this.
Thanks.

Hello Satish,
Is this issue specific to FileSystem location? What about default enterprise location?
When you view the reprt in InfoView, click on Refresh button to get current data. If the repot was published with Saved Data option, then you would see data in the report but it would be old one.
Above step would confirm that there is no issues with database user credentials specified with the report.
Also, open the report in Crystal Reports 2011, refresh it and publish without saved data in BI 4 repository and schedule it.
Regards,
Mahesh

Service for network file system fails to install

Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
Click on the Roles node in the left pane, and then click the
Add Roles link.
On the Add Roles Wizard welcome page, click Next to continue.
From the list of roles to install, select File Services, and click
Next to continue.
On the Introduction to File Services page, click Next to continue.
On the Select Role Services page, keep the File Server box checked and select
Services for Network File System. Click Next to continue.
On the Confirmation page, review the settings and click the Install button.
Click Close when the wizard completes.
ServerManager Log:
From the ServerManager.log file under C:/Windows/Logs I can see the below.
2272: 2013-02-12 16:13:51.479 [CBS]                       IsCacheStillGood: True.
2272: 2013-02-12 16:14:05.534 [Provider]                  System changed since last refresh: False
2272: 2013-02-12 16:15:45.816 [InstallationProgressPage] Loading progress page...
2272: 2013-02-12 16:15:45.831 [InstallationProgressPage] Begining Sync operation...
2272: 2013-02-12 16:15:45.842 [Sync]
Sync Graph of changed nodes
==========
name     : File Services
state    : Changed
rank     : 1
sync tech: CBS
guest[1] : File Server
guest[2] : Distributed File System
guest[3] : File Server Resource Manager
guest[4] : Services for Network File System
guest[5] : Single Instance Storage
guest[6] : Windows Search Service
guest[7] : Windows Server 2003 File Services
guest[8] : BranchCache for network files
provider : FileServerRoleProvider
name     : Services for Network File System
state    : Changed
rank     : 2
sync tech: CBS
provider : FileServerRoleProvider
name     : File Server
state    : Changed
rank     : 2
sync tech: CBS
provider : FileServerRoleProvider
2272: 2013-02-12 16:15:45.842 [Sync]                      Calling sync provider of Services for Network File System ...
2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'Services for Network File System'...
2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'Services for Network File System'.
2272: 2013-02-12 16:15:45.843 [Sync]                      Calling sync provider of File Server ...
2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'File Server', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'File Server'...
2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'File Server', updateElement: 'CoreFileServer'
2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'File Server'.
2272: 2013-02-12 16:15:45.844 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
2272: 2013-02-12 16:15:46.315 [CBS]                       ...parents that will be auto-installed: '<none>'
2272: 2013-02-12 16:15:46.316 [CBS]                       ...default children to turn-off: '<none>'
2272: 2013-02-12 16:15:46.325 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p:
Staged, a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.325 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to
'InstallRequested'
2272: 2013-02-12 16:15:46.335 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.336 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.345 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a:
Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.345 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
2272: 2013-02-12 16:15:46.354 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.354 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.363 [CBS]                       ...current state of 'CoreFileServer': p: Staged, a: Staged,
s: UninstallRequested
2272: 2013-02-12 16:15:46.363 [CBS]                       ...setting state of 'CoreFileServer' to 'InstallRequested'
2272: 2013-02-12 16:15:46.373 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
2272: 2013-02-12 16:15:46.390 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.408 [CBS]                       ...'NFS-Administration' : applicability: Applicable
2272: 2013-02-12 16:15:46.426 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.435 [CBS]                       ...'CoreFileServer' : applicability: Applicable
2272: 2013-02-12 16:15:46.493 [CbsUIHandler]              Initiate:
2272: 2013-02-12 16:15:46.494 [InstallationProgressPage] Installing...
2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Error: -2147021879 :
2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Terminate:
2272: 2013-02-12 16:15:52.035 [InstallationProgressPage] Verifying installation...
2272: 2013-02-12 16:15:52.049 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient
ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
Status: -2147021879 (80070bc9)
2272: 2013-02-12 16:15:52.052 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
2272: 2013-02-12 16:15:52.053 [FileServer]                Skipped configuration of 'File Server' because install operation failed.
2272: 2013-02-12 16:15:52.053 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
          'Services for Network File System',
          'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
[STAT] Configuration(s) took '0.0002143' second(s) total.
[STAT] Total time: '6.206078' second(s).
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Sync operation completed
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Performing post install/uninstall discovery...
2272: 2013-02-12 16:15:52.056 [Provider]                  C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
2272: 2013-02-12 16:15:52.056 [CBS]                       IsCacheStillGood: False.
2272: 2013-02-12 16:15:52.526 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
80070bc9 (-2147021879)
2272: 2013-02-12 16:15:59.342 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.380 [DISCOVERY]                 hr: -2147021879 -> reboot required.
2272: 2013-02-12 16:15:59.390 [InstallationProgressPage] About to load finish page...
2272: 2013-02-12 16:15:59.390 [InstallationFinishPage]    Loading finish page
2272: 2013-02-12 16:15:59.401 [InstallationFinishPage]    Finish page loaded
In Windows Event long I can see the following events logged:
Event 3002, Port Map:
Windows(R) failed a request to register RPC Port Mapper on TCP port 111. RPC Port Mapper cannot start.
Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers. Without RPC Port Mapper, Server for NFS
cannot start and NFS clients cannot access files on this server.
Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
Event 7000, Service Control Manager:
The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
The dependency service or group failed to start.
Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
Dependent Service Status:
During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
“31 (0x1f)”. Please find below the query result.
C:\Users\CMMAdmin>sc query rpcxdr
SERVICE_NAME: rpcxdr
        TYPE               : 1 KERNEL_DRIVER
        STATE              : 4 RUNNING
                                (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\Users\CMMAdmin>sc query msnfsflt
SERVICE_NAME: msnfsflt
        TYPE               : 2 FILE_SYSTEM_DRIVER
        STATE              : 4 RUNNING
                                (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
        WIN32_EXIT_CODE    : 0 (0x0)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\Users\CMMAdmin>sc query portmap
SERVICE_NAME: portmap
        TYPE               : 1 KERNEL_DRIVER
        STATE              : 1 STOPPED
        WIN32_EXIT_CODE    : 31 (0x1f)
        SERVICE_EXIT_CODE : 0 (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0
C:\Users\CMMAdmin>
As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
Please let me know if you have any suggestion on how debug this issue further.
Thanks
-Poopesh

Hey,
I had this same problem running MS Server 2008 R2 and server log is as follow:
name     : Services for Network File System
state    : Changed
rank     : 2
sync tech: CBS
ant.     : empty
pred.    : File Services
provider : FileServerRoleProvider
5676: 2014-01-14 14:08:57.474 [Sync]                      Calling sync provider of Services for Network File System ...
5676: 2014-01-14 14:08:57.521 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
5676: 2014-01-14 14:08:57.536 [FileServer]                Begin installation of 'Services for Network File System'...
5676: 2014-01-14 14:08:57.536 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
5676: 2014-01-14 14:08:57.536 [FileServer]                Installation queued for 'Services for Network File System'.
5676: 2014-01-14 14:08:57.536 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure ' ...
5676: 2014-01-14 14:09:00.173 [CBS]                       ...parents that will be auto-installed: '<none>'
5676: 2014-01-14 14:09:00.173 [CBS]                       ...default children to turn-off: '<none>'
5676: 2014-01-14 14:09:00.204 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.204 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
5676: 2014-01-14 14:09:00.235 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.235 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.266 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.266 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
5676: 2014-01-14 14:09:00.282 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.282 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.313 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
5676: 2014-01-14 14:09:00.360 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:00.422 [CBS]                       ...'NFS-Administration' : applicability: Applicable
5676: 2014-01-14 14:09:00.469 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:01.624 [CbsUIHandler]              Initiate:
5676: 2014-01-14 14:09:01.624 [InstallationProgressPage] Installing...
5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Error: -2147021879 :
5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Terminate:
5676: 2014-01-14 14:09:41.170 [InstallationProgressPage] Verifying installation...
5676: 2014-01-14 14:09:41.264 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
5676: 2014-01-14 14:09:41.279 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
5676: 2014-01-14 14:09:41.279 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
          'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
[STAT] Configuration(s) took '0.0062843' second(s) total.
[STAT] Total time: '43.7431429' second(s).
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
made
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Sync operation completed
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Performing post install/uninstall discovery...
5676: 2014-01-14 14:09:41.295 [Provider]                  C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
5676: 2014-01-14 14:09:41.295 [CBS]                       IsCacheStillGood: False.
5676: 2014-01-14 14:09:43.900 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
5676: 2014-01-14 14:09:57.410 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.488 [DISCOVERY]                 hr: -2147021879 -> reboot required.
5676: 2014-01-14 14:09:57.613 [InstallationProgressPage] About to load finish page...
5676: 2014-01-14 14:09:57.628 [InstallationFinishPage]    Loading finish page
5676: 2014-01-14 14:09:57.644 [InstallationFinishPage]    Finish page loaded
My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
Have a good one!

Analysis Services failing to Start . File system error: Error occurred during the creation of directory

Hello All,
Posting this problem here and hoping for a solution from the experts in this forum.
When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
"The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
When Checked the Event Viewer i see the following error -
The service cannot be started: The following system error occurred: The filename, directory name, or volume label syntax is incorrect. File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
Backup'.
I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
Let me know if you need any more details
SG

Is this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
succeed.
http://artisconsulting.com/Blogs/GregGalloway

TS3212 I am trying to download itunes to PC and it downloads but then says Service Apple Mobile Device failed to restart. Verify sufficient privileges to start system services. What do I need to do? I am an Administrator on the PC so what else needs atten

I am trying to download itunes to PC and it downloads but then says Service Apple Mobile Device failed to restart. Verify sufficient privileges to start system services. What do I need to do? I am an Administrator on the PC so what else needs attention?

Hi txatxo
Thanks for using Apple Support Communities. You may need to restart the Apple Mobile Device Service. This article has instructions for doing this:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying a thorough uninstall and reinstall of iTunes as described here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari

CR 2010 Report using "File System Data" as source fails in production

Hello, I've recently upgraded my website from VS 2008 with full CR 2008 to VS 2010 using CR 2010 SP1 runtime (x32). Everything went fine except for one report that uses as a source the "file system data". It points to a share on a samba drive and it worked great before the upgrade. After upgrading my development box the report runs fine, but when I deployed it, it fails with the message:
Failed to load database information. Error in File {report name} {D5D84E7F-54DB-4BCA-B3C3-0A169CDC36D7}.rpt: Failed to load database information.
I made sure the websiteu2019s Application Pool identity was set to use credentials of a user who has access to the share.
The data source has the following properties:
Database DLL: crbd_filesystem.dll
File Mask: .
Include Empty Directories: False
Max Number of Subdirectory Levels: -1
Starting Directory:
{FreeBSD server name}\{share name}
This report uses a sub-report which has the same source. This report works fine from (full) CR 2008 and from the designer inside of VS 2010 works too. I can run it on my development box (in release and debug modes) which is Windows 7 (x64) using IIS 7.
In production, we donu2019t include the runtime in our application deployment, since we run multiple sites and do updates frequently, so we pre-install (one time) the runtime separately on the server. We installed the CR 2010 SP1 x32 runtime on our test and development boxes which both are Windows 2003 with IIS6 and made sure they are setup to use .Net 4 and have the Application Pool identity setup to have access to the share. All my other reports which use ODBC work fine. Just this one report doesnu2019t and Iu2019m at a loss on how to even begin troubleshooting this.
Is CR 2010 still capable of using u201Cfile system datau201D as a source? I couldnu2019t find anything on u201Cfile system datau201D with CR 2010. Though I have seen under Other Sources, it still exist when I created a new report, just to try it out.

Looks like you've found a bug with the CRVS2010 runtime. I looked for the crbd_filesystem.dll in the CRVS2010 install directory (C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86) and it is there. I then opened up the 32 bit MSI and MSM with the MS Orca utility to see if the file is included and it is not.
Two things we can do:
1) Add the crdb_filesystem.dll to your install and make sure it installs to the above directory on the runtime computer
2) I will created a fix request for the issue, however next fix will be Service Pack 2 (ETA, sometime after October) and I doubt this will make it there. So we'd be looking at SP 3 - if there will be one (ETA would be in 2012).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Failed to load database information. Error in File ReportName {E420E88A-5947-4925-844E-75E6311D3EB3}.rpt: Failed to load database information.

Hi All,
We've been running CR for VS2010 for a number of years in our web app without any issues. Using the same code we recently upgraded our application to support x64 and we have run into this error on our QA servers:
Failed to load database information. Error in File ReportName{Guid}.rpt. Failed to load database information.
Here's are server setup:
Windows Server 2012 Datacenter x64
SAP Crystal Reports Runtime Engine for .Net Framework (64-bit)
IIS 8
Database Server
Oracle 12c
Interestingly, Crystal Reports works fine on our dev machines and it also works on our dev machines if I connect to the QA Database server directly. So I've ruled out any Oracle issues.
I believe the permissions are set up correctly for CR to run, but I'd like to know what permission CR needs to run. I can't find a definite answer reading the forum posts or on the WIKI.
I've used Process Monitor and there seems to be some permission issues with the uf12manager.DLL. See attached document.
I'm really stuck here and any help is appreciated.
Thanks!

Nothing to do with UFL manager, that may be a missing dependency.
Search on a kbase on how to enable crlogger, that may tell you what is failing.
Typical Oracle issues on a 64 bit app is I believe you need to install the Oracle 64 bit Client and then 32 bit client.
Do we support Oracle 12? No we don't...
See this PAM for more info:
SAP Crystal Reports 2011 Product Availability Matrix (PAM)
Open the link for the Database connectivity....
Don

'SERVERNAME' failed to perform the operation. The virtual machine is not in a valid state to perform the operation. (Virtual machine ID "GUID")

DPM 2012 R2
Server 2012 R2 and Server 2012 (R1). Both CSV volumes and Hyper-V hosts with non clustered volumes.
ISCSI Attached Storage. (Nimble SAN)
Every time a VM backup is made this error message occurs:
"'SERVERNAME' failed to perform the operation. The virtual machine is not in a valid state to perform the operation. (Virtual machine ID "GUID")"
The backup seems to finish fine most of the time, but it also seems to be causing some VM's to be in a hung/frozen state when this happens.

Hi Nordland,
So it seems that there are some non-backup operation that is trying to occur on the Virtual machine while the backup is in progress. Does this VM have replication enabled on it. Is there a Hyper-V replica server to which this machine get's replicated?
Regards,
Siddharth Jha

AnyConnect 3.1.01065 error - Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established.

I've got a user running:
AnyConnect 3.1.01065
on
Windows 7 64bit.
Several weeks ago she started encountering the following error:
-after logging into Windows and launching the AnyConnect client, she enters her username and password and successfully authenticates.
-the connection is not established and she's presented with the following message: "Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established."
After doing some troubleshooting, inlcuding uninstalling/reinstalling the anyconnect client, it seems the culprit is the following file:
C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\<filename>.xml. When the problem occurs (which is not regularly, sometimes it occurs daily, sometimes just once a week) examining that file indicates it has no security or permissions set. Quitting the AnyConnect software, modifying the file so that the user has full control of it, then relaunching AnyConnect fixes the problem (until it happens again). Uninstalling, and making sure to move C:\ProgramData\Cisco to the trash, then reinstalling did not seem to help.
The closest match in these forums is the following thread, https://supportforums.cisco.com/message/3760446 - though no clear resolution was given.
Has anyone else encountered this, and been able to fix it?
Thanks much.

Just FYI, it seems at least in this case, purging all the previous system restore points seems to have resolved this issue...

Patch Fails: 119907-13 Gnome 2.6.0_x86: Virtual File System Framework patch

Similar Messages

Maybe you are looking for