Patch for 9ias 1.0.2.2.2a and 9idb R1 also 8.1.7 R3

Could any one give me patch for 9ias 1.0.2.2.2a and 9idb R1 also 8.1.7 R3, because i don't have login at metalink, please send me at [email protected] thank you very much!!!

The only advice that I can tell you is that you have install the softwares in different Oracle Homes and the rest is to check all pre-requisites and directives in manual installations.
Joel Pérez

Similar Messages

My wall charger is showing sign of charge but it's not charging, last three days I charged my iphon to mac book pro, what can do for charge with my wall charger. And I tarted also 3 deferent chargers wich is working with other iPhones but my iphon is not.

My wall charger is showing sign of charge but it's not charging, last three days I charged my iphon to mac book pro, what can do for charge with my wall charger. And I tarted also 3 deferent chargers wich is working with other iPhones but my iphon is not charging it's only showing the sign of charge.

Hi there Zeeshan Saeed Al Barvi,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
-Griff W.

CPU Patch for SOA BPEL -10.1.3.5 and B2B -10.1.2.0.4

We are in DOD -GOVT US marine corps.. WE are on 10.1.3.3.1 .. There is no CPU Patches for 10.1.3.3.1 nor
for 10.1.2.03-B2B
open issues/questions:
Open Issues:
1. What is Oracle's recommendation about upgrading 10.1.3.5 vs 10.1.3.4 (CPU Patch support length). Also CPU Patch support policy for BAM 10.1.3.3.1 and B2B 10.1.2.3.
2. Any MLRs to apply after upgrading SOA/BPEL/WSM/BAM/B2B 10.1.3.5 ?
3. Interoperability of OWSM 10.1.3.4, BAM 10.1.3.3.1, B2B 10.1.2.3 and SOA/BPEL 10.1.3.5. Can they co-exist or must they(one or more) be in same release level?
Thanks & Regards
Sri

Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks.

Patch for 9ias Rel2 for windows 2000

Hi,
Are there any patches to be applied after installing 9iAS Rel2. The installation done is BI+tools.
Software downloaded from OTN 2 weeks ago
OS:windows 2000
Thanks
srinath

No, no patches need to be applied.
Thanks,
Ashesh Parekh
Oracle9iAS Product Management

Patch for 9iAS and JSTL?

The following message was posted in the OC4J Forum. Our latest thoughts for fixing the problem revolve around hopes of upgrading the OC4J component in 9.0.2.0.1 in Enterprise Edition (Solaris) to 9.0.3. Is this possible?
Thanks
Todd
--------- Original Post ------------
NullPointerException using JSTL
I currently have OAS Enterprise Edition 9.0.2.0.1 on Solaris installed. I have a web application which utilizes Tiles and JSTL. When I run my application through JDeveloper 9.0.3, both Tiles and JSTL tags work. However, when I deploy to Oracle Enterprise Manager and try to run my application, Tiles tags work but JSTL tags do not. Instead, I get the following error:
500 Internal Server Error
OracleJSP:
JSP Error:
Request URI:/edd/helloworld.jsp
Exception:
java.lang.NullPointerException
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:279)
at java.lang.ClassLoader.loadClass(ClassLoader.java:292)
at java.lang.ClassLoader.loadClass(ClassLoader.java:292)
at java.lang.ClassLoader.loadClass(ClassLoader.java:292)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at oracle.jsp.parse.JspUtils.loadClassJDK(JspUtils.java:219)
at oracle.jsp.parse.JspUtils.loadClass(JspUtils.java:209)
at oracle.jsp.parse.JspRTTag.(JspRTTag.java:102)
at oracle.jsp.parse.JspParseState.createTagParser(JspParseState.java:410)
at oracle.jsp.parse.JspParseTag.parseNextTag(JspParseTag.java:538)
at oracle.jsp.parse.JspParseTagFile.parse(JspParseTagFile.java:160)
at oracle.jsp.parse.OracleJsp2Java.transform(OracleJsp2Java.java:40)
at oracle.jsp.runtimev2.JspPageCompiler.attemptCompilePage(JspPageCompiler.java:295)
at oracle.jsp.runtimev2.JspPageCompiler.compilePage(JspPageCompiler.java:171)
at oracle.jsp.runtimev2.JspPageInfo.compileAndLoad(JspPageInfo.java:338)
at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:481)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:255)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
My JSP looks like:
<%@ taglib prefix="c" uri="/jstl-c" %>
<%@ taglib prefix="tiles" uri="/tiles" %>
<html>
<head><title>hello world</title></head>
<body>
<table>
<c:forEach begin="1" end="5">
<tr>
<td>
Hello world!<br><br>
The current time is: <%= System.currentTimeMillis() %>
</td>
</tr>
</c:forEach>
</table>
</body>
</html>
The relevant lines of my web.xml are:
<taglib>
<taglib-uri>/tiles</taglib-uri>
<taglib-location>/WEB-INF/tlds/struts-tiles.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>/jstl-c</taglib-uri>
<taglib-location>/WEB-INF/tlds/c.tld</taglib-location>
</taglib>
The TLD files do exist in /WEB-INF/tlds/
After doing some research into this issue, I haven't found a solution, but I get the feeling this is a bug that has been patched or will be patched soon. Is there a patch out, and if so, where is it?
------- Follow-on Question about upgrading OC4J in 9.0.2.0.1 ---------
Upon further investigation we found bug 2698206 that seems to be the relevant bug. The bug has been fixed in 9.0.3. It is my understanding that the only certified version of Enterprise Edition is 9.0.2.0.1.
1) Is there a newer version of Enterprise Edition (9.0.3 or 9.0.4)?
2) If not, can we upgrade the OC4J in 9.0.2.0.1 to 9.0.3? (our sysadmins need this somewhat certified, otherwise we can't upgrade our production servers).
3) Any other ideas?
Thanks
Todd

http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=179240.1
If you are using Forms and/or Reports, you'll want to install Patch 15 too.

Errors on applying PSU patches for GI (Grid Infrastructure) 11.2.0.3

Need help!
This is all in the version of 11.2.0.3.   We created a single node GI with ASM by the user grid.   Grid home is /grid/product/11.2/grid/   And oracle home created by user oracle at /oracle/product/11g.    I have downloaded the GI PSU patch 16742216 for GI and Oracle DB PSU patch 16619892.   I just want to apply the patch to GI home, then Oracle home with different PSU.   Here is what I did after unzip the patch for GI:
1.   Stopped ASM instance and stopped listener (these are owned by grid)
2. Created a ocm response file at grid home by grid user:   $ORACLE_HOME/OPatch/ocm/bin/emocmrsp   -no_banner
3. Use the root to run grid profile to setup grid GI environment
4. Use the root to run as (as described in Oracle instruction): opatch auto /home/grid/patches -ocmrf /grid/product/11.2/grid/OPatch/ocm/bin/ocm.rsp
But got this error.   For some reason it looks for Oracle home, not grid home, although I do not have any oracle home environment setup in root user:
===================================================================================================
lsildb10p|+ASM|/home/grid/patches $ opatch auto /home/grid/patches -ocmrf /grid/product/11.2/grid/OPatch/ocm/bin/ocm.rsp
Executing /grid/product/11.2/grid/perl/bin/perl /grid/product/11.2/grid/OPatch/crs/patch11203.pl -patchdir /home/grid -patchn patches -ocmrf /grid/product/11.2/grid/OPatch/ocm/bin/ocm.rsp -paramfile /grid/product/11.2/grid/crs/install/crsconfig_params
/grid/product/11.2/grid/crs/install/crsconfig_params
/grid/product/11.2/grid/crs/install/s_crsconfig_defs
This is the main log file: /grid/product/11.2/grid/cfgtoollogs/opatchauto2013-08-10_09-17-36.log
This file will show your detected configuration and all the steps that opatchauto attempted to do on your system: /grid/product/11.2/grid/cfgtoollogs/opatchauto2013-08-10_09-17-36.report.log
2013-08-10 09:17:36: Starting Oracle Restart Patch Setup
Using configuration parameter file: /grid/product/11.2/grid/crs/install/crsconfig_params
The opatch minimum version check for patch /home/grid/patches/16619898/custom/server/16619898 failed for /oracle/product/11g
The opatch minimum version check for patch /home/grid/patches/16619892 failed for /oracle/product/11g
Opatch version check failed for oracle home /oracle/product/11g
Opatch version check failed
update the opatch version for the failed homes and retry
======================================================================================================
Where I did wrong?   Thanks for advice!

Thanks for the update. I have tried with chmod -R a+rwx on the patch location.   But got the error (different error). Here is long detail message in /grid/product/11.2/grid/cfgtoollogs/opatchauto2013-08-13_06-35-35.log
=====================================
Log file location : /grid/product/11.2/grid/cfgtoollogs/opatch/opatch2013-08-13_05-35-37AM_1.log
Invoking utility "saveconfigurationsnapshot"
UtilSession failed: UtilSession failed to generate configuration xml file [ PRKH-1001 : HASContext Internal Error
PRKH-3013 : An improper buffer argument was supplied to Cluster Synchronization Services ]
====================================
When I run the command as root, the ORACLE_HOME is set to /grid/product/11.2.3/grid/   which is the home for GI.
Then check in the log file: /grid/product/11.2/grid/cfgtoollogs/opatch/opatch2013-08-13_05-35-37AM_1.log
[Aug 13, 2013 5:35:38 AM]
OPatch was not able to create .patch_storage directory
Unable to get Environent variables for Stand Alone home

Patch for ESSBASE 11.1.2.2

Hi All,
I had Applied patch for
1. Shared Servcies 11.1.2.2 (14020629) .300patch
2.EPM Workspace 11.1.2.2 (13936087).300patch
3.Planning 11.1.2.2 (13905088) .300patch
4.FDM & FOR ERPI 11.1.2.2 (14173894).300patch
i want to apply patch for Essbase 11.1.2.2 now can i do that ?. is there any sequence ,because i had applied patchs for shared services, workspace,planning and FDM earlier thats why - ?
i had applied patch for FDM 11.1.2.2 is this same patch applies for ERPI 11.1.2.2 also - ?
i got success message in command prompt when i applied patch for FDM , but once i open webclient and workbech client in help i am not able to find .300 new patch i applied for FDM
where can we check it -?

You can patch Essbase in any sequence, it will say in the readme if there are prereqs
Cheers
John
http://john-goodwin.blogspot..com/

First patch for the non-released 9iAS 9.0.4

Today I mentioned the first patch is released for 9ias 9.0.4 (patch 3089193). Strange that Oracle already releases patches for a product that itself has not been released yet. Is it that difficult to implement that patch into the base version? I heard that we may expect 9iAS 9.0.4 around september/october so there should be time enough.

Well -- to respond to the patches...
9.0.2.1 core patchset breaks my Jdev/BC4J application with an error indicating the BC4J tables couldn't be updated
So, I try 9.0.2.2 patch. Can't get past installation instructions (posted message yesterday about this -- no response yet).
javax.naming.CommunicationException: webdev1.softmatic.esoftmatic.com:4031. Root exception is java.lang.IllegalArgumentException: object is not an instance of declaring class
Patches have definitely not helped here.
To be constructive:
1) Looking for 9.0.4 release to allow clustering of OC4J processes even if installed with reports/forms (i.e. allow me to use EM to cluster, even if EM can't cluster the reports servers). It would be nicer to have EM cluster reports services too, but probably need smart way of updating CGICMD.DAT, for example. I could deal with just clustering the OC4J portions, but to prevent me from doing it because I've installed the "business intelligence" is frustrating because I know the capability is there -- I just can't get there because we use the reports too.
2) Looking for text/xml/configuration files on NT to use Windows CRLF (cgicmd.dat, opmn.xml, etc). Annoying, especially since I have to document the installation procedures for disaster recovery and need to include unix to dos type utilities, etc. Getting a real editor isn't my problem, it's the disaster recovery plan where you can't count on people knowing how to deal with it themselves.
3) Looking for way to deploy 9.0.3 JDeveloper BC4J to 9.0.2 safely (docs say you can't)...As a generalization, allow deployment of newer jdev/bc4j libraries with the applications. The "tightness" of BC4J within 9iAS causes issues. Development environments are updated more regularly than production -- hence the ability to fully deploy newer applications to the older app servers is key.
There are probably others... but those topics seem to not come up in the forums.
Jeff

Oracle 9iAs documentation and patches for aix 5.3

Hi,
I have Oracle 9i application server release 1.0.2.2.2. I work on aix 5.3 and i've installed oracle server release 3. In Oracle 9iAs i need to work with oracle forms 6i and reports 6i.
I need Oracle Oracle 9i application server release 1.0.2.2.2. documentation and patches for aix 5.3
best regards

What is Oracle server release 3? Application server 1.0.2.2.2 is desupported now, it worked in the past with server release 9.2. Certification matrix on metalink shows a lot of necessary additional steps (OS patches and software patches) to be done. Metalink is also the place for Oracle software patches, OS patches come from IBM.
OS dumps (but for pre-6i versions) are documented in metalink note
DEVELOPER TOOLS CORE DUMP OR OPERATING SYSTEM ERRORS RELATED TO MOTIF
Note:1077772.6
Werner

Jinitiator 1.3.1.9, need upgrade for 9iAS server?

Hi, I am trying to setup a 9iAS test server on Windows 2000. The bundled Jinitiator 1.1.8.? Did not work with my test box but did work on the server. I downloaded Jinitiator 1.3.1.9 and it installs and runs on my client box. I have modifed the needed FORMSWEB.CFG & Jinit files and I go get the correctly configured served out page to my client but I get a java exception:
Oracle.ewtinAWT.lwcomponet'''s signer information does not match signer info...
I can find the referenced .class file. However, I didnt know that the server side needed to be modifed to run Jinitiator 1.3.1.9. Is there a patch for the server side or more docs somewhere.
I'm stuck.
Thanks for any help,
Scott Peterson

Firefox 3.0 and 3.5/6 versions require at least Mac OS X 10.4
http://www.mozilla.com/en-US/firefox/system-requirements.html - Mozilla Firefox 3.6 System Requirements
Firefox 2.0.0.20 is the last release that runs on Mac OS X 10.2 and 10.3
See:
* http://kb.mozillazine.org/Installing_Firefox
* http://kb.mozillazine.org/Unsupported_operating_systems
Mac: https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
Other browsers that you can look at:
http://caminobrowser.org/download/releases/ (#os10.3.8)
[http://en.wikipedia.org/wiki/ICab iCab]: http://www.icab.de/
http://www.seamonkey-project.org/releases/seamonkey1.1.19

Linux update for 9iAS R2

I've been reading all of the posts for 9iAS for Win2K.
Is this a general update of the product which will include
a Linux version update? I waded through all of the install
guides and release notes and managed to get the patched AS to run OK on Linux.
But I'd like to avoid that again ;-)
no problem, it was a pleasure. I may be doing it for 'work' soon
so I need to get up to speed ASAP.
And thanks for all replies!
Pat

Thank you! Do I need to apply any special O/S patches first?

Patch for Apache crashes ?

Hi,
In our production environment we use Portal 3.0.9.8.0 and the 9iAS is on a win nt 4.0 server and the 8.1.7.0.0 rdbms is on another
win nt server (3-tier). Other products on the 9iAS are Discoverer and Web Forms and Reports.
The apache webserver is crashing frequently. First we received a WSADuplicateSocket error.
After searching on metalink we found a workaround that described to exclude mod__ose.conf in the oracle%.conf file. (e.g [#] include mod__ose.conf ). After implementing this workaround, the errors concerning the WSADuplicateSocket disappeared.
But now after browsing a few minutes apache still crashes. Now we receive another error message:
[Fri Sep 07 04:30:30 2001] [error] [client 172.16.2.117] File does not exist: d:/data/opauren/icons/afsright.gif
[Fri Sep 07 20:20:24 2001] [notice] FastCGI: process manager initialized
[Fri Sep 07 20:20:37 2001] [warn] OPM: EW: Process soas1:0 (pid:263) died, restarting.
[Fri Sep 07 20:20:40 2001] [warn] OPM: EW: Process soas1:0 (pid:342) died, restarting.
[Fri Sep 07 20:20:43 2001] [warn] OPM: EW: Process soas1:0 (pid:286) died, restarting.
[Fri Sep 07 20:20:46 2001] [warn] OPM: EW: Process soas1:0 (pid:174) died, restarting.
[Fri Sep 07 20:20:49 2001] [warn] OPM: EW: Process soas1:0 (pid:346) died, restarting.
[Fri Sep 07 20:20:52 2001] [warn] OPM: EW: Process soas1:0 (pid:270) died, restarting.
[Fri Sep 07 20:20:55 2001] [warn] OPM: EW: Process soas1:0 (pid:387) died, restarting.
[Fri Sep 07 20:20:58 2001] [warn] OPM: EW: Process soas1:0 (pid:403) died, restarting.
Apache tries to create a new child process but fails.
My question is: If there is a patch for these apache problems ? Who does apache works after the patch is applied ?
Best regards,
Jerome
null

Hi,
Does anybody have a tip or workaround ...
/thanks
null

Oracle Patches for Partners

Hi,
We are an Oracle Certified Partner and we need to download some patches to be applied for our Dev and Testing environments (latest patches for Oracle 9iAS environment). However, I find that you need to have a Metalink Login to perform the same. Unfortunately, we do not have a metalink ID as far as I am aware of. What is the method to obtain the required patches?
Regards,
Uditha

Hi Uditha,
To logon to MetaLink you will need your company CSI number. You can obtain your company CSI number by contacting your OPN Primary Admininstrator.
To locate your OPN Primary Administrator log onto the Oracle Partner Network website at www.partner.oracle.com. Log onto the site and once you are on the front page scroll down to the bottom right 'Update Your Profile' portlet. You will see a link to your Primary Administrator.
Should you require further assistance please contact your local OPN Contact. There is a link at the bottom of the OPN web page called 'Contact OPN'. Click on that link and it will ask you what country and then provide you a phone number to call for more assistance.

AAC/MPEG-4 support patch for abcde

I got bored to day and made up this patch for abcde that adds support for AAC using the M4A extension.
It uses FAAC as the encoder and also patches abcde to version 2.2.3
I have not tested it yet so bear with me...i'll post my test results later.
You'll have to manually add the "M4AENCOPTS=" variable to the config
usage is: abcde -o m4a
UPDATED: fixed a plethora of typos
another side note is the fact FAAC must be compiled with mpeg-4 support, the Archlinux package for FAAC isn't, so therefore this could be a problem unless you compile FAAC yourself. I submitted a feature request to get mp4 support added.
the following is the 2.2.0 to 2.2.3 update+AAC patch. I will submit a AAC patch for the newest release to the developers of abcde later on.
--- abcde-old-2.2.0 2005-03-08 12:42:14.000000000 -0500
+++ abcde2 2005-03-08 12:11:07.000000000 -0500
@@ -11,7 +11,7 @@
# Copyright for this work is to expire January 1, 2010, after which it
# shall be public domain.
-VERSION="2.2.0"
+VERSION="2.2.3"
usage ()
@@ -21,7 +21,7 @@
echo "-1 Encode the whole CD in a single file"
echo "-a <action1[,action2]...>"
echo " Actions to perform (cddb,read,normalize,encode,tag,move,playlist,clean)"
-echo "-A Experimental actions (retag, transcode)"
+#echo "-A Experimental actions (retag, transcode)"
echo "-b Batch mode: enable album normalization and nogap encoding"
echo "-c <file>"
echo " Specify a configuration file (overrides system and user config files)"
@@ -366,6 +366,9 @@
mpc)
run_command tagtrack-$1 true
+ m4a)
+ run_command tagtrack-$1 true
+ ;;
esac
done
@@ -489,6 +492,10 @@
## FIXME ## to the encoder ends up empty.
run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
+ m4a)
+ # AAC/MPEG-4 format (.m4a) is done locally, with inline tagging.
+ run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $M4AENCODER $M4AENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -w "$IN" -o "$OUT"
+ ;;
esac
done
# Only remove .wav if the encoding succeeded
@@ -737,6 +744,9 @@
if [ "$INTERACTIVE" = "y" ]; then
while [ "$DONE" != "y" ]; do
read ERASEPLAYLIST
+ if [ "$ERASEPLAYLIST" = "" ]; then
+ ERASEPLAYLIST=e
+ fi
case $ERASEPLAYLIST in
e|E|a|A|k|K) DONE=y ;;
@@ -764,7 +774,7 @@
ARTISTFILE=$(mungefilename "$TRACKARTIST")
# If we want to start the tracks with a given number, we need to modify the
# TRACKNUM value before evaluation
- if [ -n $STARTTRACKNUMBER ] ; then
+ if [ -n "$STARTTRACKNUMBER" ] ; then
# Get the trackpadding from the current track
CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - 1 ))
@@ -843,7 +853,7 @@
cdparanoia|debug)
if [ "$WEHAVEACD" = "y" ]; then
vecho "Querying the CD for audio tracks..."
- TRACKS=$( $CDROMREADER -Q 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
+ TRACKS=$( $CDROMREADER -d $CDROM -Q --verbose 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
CDPARANOIAAUDIOTRACKS="$TRACKS"
else
if [ -f "$ABCDETEMPDIR/status" ] && checkstatus cdparanoia-audio-tracks ; then
@@ -1354,7 +1364,7 @@
EDITCDDB=n
fi
if [ "$EDITCDDB" = "y" ]; then
- CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
+ CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d" " -f1);
# Use the debian sensible-editor wrapper to pick the editor that the
# user has requested via their $EDITOR environment variable
@@ -1387,7 +1397,7 @@
# Some heuristics first. Look at Disc Title, and if it starts with
# "Various", then we'll assume Various Artists
- if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2 -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
+ if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
echo "Looks like a Multi-Artist CD" >&2
VARIOUSARTISTS=y
else
@@ -1470,7 +1480,7 @@
echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
- if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d " " -f 1) ]; then
+ if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d" " -f1) ]; then
# This works but does not have the necessary error checking
# yet. If you are familiar with the CDDB spec
# (see http://www.freedb.org/src/latest/DBFORMAT)
@@ -1577,7 +1587,7 @@
WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
OUTDATA="$ABCDETEMPDIR/track$UTRACKNUM.$OUTPUTTYPE"
if [ -r "$CDDBDATA" ]; then
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d [:cntrl:])
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d [:cntrl:])
echo "Grabbing track $UTRACKNUM: $TRACKNAME..." >&2
else
echo "Grabbing track $UTRACKNUM..." >&2
@@ -1692,6 +1702,7 @@
SPEEXENCODERSYNTAX=default
MPPENCODERSYNTAX=default
NORMALIZERSYNTAX=default
+M4AENCODERSYNTAX=default
OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
# Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
@@ -1738,6 +1749,7 @@
SPEEXENC=speexenc
# mpp (Musepack)
MPPENC=mppenc
+M4AENC=faac
ID3=id3
ID3V2=id3v2
@@ -1773,6 +1785,7 @@
SPEEXENCOPTS=
# mpc
MPPENCOPTS=
+M4AENCOPTS=
ID3OPTS=
ID3V2OPTS=
@@ -2039,6 +2052,7 @@
spx) [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc ;;
mpc) [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc ;;
+ m4a) [ "$M4AENCODERSYNTAX" = "default" ] && M4AENCODERSYNTAX=faac ;;
*) echo "abcde error: Invalid OUTPUTTYPE defined" >&2
exit 1
@@ -2100,6 +2114,12 @@
MPPENCODER="$MPPENC"
esac
+case "$M4AENCODERSYNTAX" in
+ faac)
+ M4AENCODEROPTS="$M4AENCOPTS"
+ M4AENCODER="$M4AENC"
+ ;;
+esac
# and which tagger
@@ -2144,7 +2164,7 @@
${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC}
${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT}
${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED}
- ${NEEDVORBISGAIN+$VORBISGAIN}
+ ${NEEDVORBISGAIN+$VORBISGAIN} $M4AENCODER
do
# Cut off the command-line options we just added in
X=$(echo $X | cut -d' ' -f2)
@@ -2207,37 +2227,6 @@
esac
fi
-if [ "$STRIPDATATRACKS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
- case "$CDROMREADERSYNTAX" in
- cdparanoia|debug)
- # cdparanoia can query the CD, so let's process the TRACKQUEUE list with the results.
- if checkstatus cdparanoia-audio-tracks; then
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-audio-tracks )
- else
- ## FIXME ##
- vecho "Querying the CD to obtain a list of valid audio tracks..."
- $CDROMREADER -Q > $ABCDETEMPDIR/cdparanoia-query 2>&1
- # Obtain a list of valid audio tracks from the results of the query
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-query | egrep '^[[:space:]]+[[:digit:]]' | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
- fi
- # Obtain the track padding value from the before-processing list and pad the CD list
- TRACKNUMPADDING=$( echo $TRACKQUEUE | awk '{print $1}' | tr -d " n" | wc -c )
- for TRACK in $CDTRACKQUEUE ; do
- TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
- PADNEWTRACKQUEUE=$(echo $PADNEWTRACKQUEUE $TRACKNUM)
- done
- CDTRACKQUEUE=$PADNEWTRACKQUEUE
- # Now, compare if the values in the list are valid tracks in the CD
- for TRACK in $TRACKQUEUE; do
- if echo $CDTRACKQUEUE | grep $TRACK >/dev/null ; then
- NEWTRACKQUEUE="$NEWTRACKQUEUE $TRACK"
- fi
- done
- TRACKQUEUE="$NEWTRACKQUEUE"
- esac
-fi
# Create playlist if needed (backgroundable) and start reading in tracks
@@ -2446,7 +2435,7 @@
# TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${UTRACKNUM} + 0))
TRACKNUM=$UTRACKNUM
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2 -d= | tr -d [:cntrl:] | sed 's/ +$//')
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d [:cntrl:] | sed 's/ +$//')
splitvarious
fi
fi
the patches can also be found here http://www2.rudefyet.com:8080/patch
please post any other issues you have

not yet, i'm going to work all the kinks out before i submit it
as of right now I noticed some major typos, on my part, that cause it to fail...i'm working on that right now

Installation guide for 9ias on RedHat Advanced Server 3

Hi
Does anyone has the installation guide for 9ias on RedHat Advanced Server 3 please? Thank you!

there is an installation guide for oracle applic server 9 and above on red hat advanced server 3 in pdf format on the linux technology center page on oracle. here is the file link.
"Install Guide: Oracle Application Server on Red Hat Enterprise Linux AS (PDF) May 2003"
you may wanna check the following link for that page.
http://otn.oracle.com/tech/linux/index.html
is this what you are looking for?
asif

Patch for 9ias 1.0.2.2.2a and 9idb R1 also 8.1.7 R3

Similar Messages

Maybe you are looking for