Patch for alert 1203/0 IP Fragment Overwrite

I was unable to find the patches for the alert 1203/0 IP Fragment Overwrite.
When i go to the site "Microsoft IP Fragment Reassembly Patches".
I was unable to find patch for the Windows XP. If i go to the Windows NT4.0 Workstation i found out that the page cannot be found as well.
I need patch for Windows XP fof alert 1203/0 IP fragment Overwrite.Kindly assist on this please anyone.

The signature fires because traffic matching what it detects is seen.
The vulnerability was disclosed prior to winXP releasing, winXP is not vulnerable to this.
Why 2 winXP endpoints are sending traffic that triggers the signature - don't know - we'd have to look at the traffic that is being passed and match that to the alert that's firing. If you feel that this there is a false positive, I ask that you capture traffic and provide the alert that fires during that capture and either open a TAC case, or submit it here:
http://tools.cisco.com/security/center/ipshome.x?i=12&shortna=ContactUS#ContactUS

Similar Messages

Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

There is an issue with the 64 bit Vista, Windows 7 and Windows 8 or 8.1 drivers that causes the spooler to crash with the following HP Deskjet printers:
Deskjet 710
Deskjet 712
Deskjet 720
Deskjet 722
Deskjet 810
Deskjet 812
Deskjet 820
Deskjet 822
Deskjet 1000
The attached file contains a patch for this issue for Vista and Windows 7.
[The patch does not currently work for Windows 8 or 8.1 x64 systems. There are some efforts to address this, if a solution is developed it will be posted here. {Edit - I have not made any progress in getting the patch to work in Windows 8 x64.}]
First make sure the driver for the printer is installed. If the driver has not been installed go to Start, Devices and Printers, Add a Printer, Local Printer, choose the proper port (for USB-Parallel converters the port will likely be USB001: or perhaps USB002: ), Next, click Windows Update then choose HP for the manufacturer and select the appropriate printer.
Apply the patch as follows: Log into the computer with an administrative account. Download the patch by clicking on this link or on the paper clip at the end of this post. Save the patch file to your computer, then unzip it. Next copy the three DLL files to the following directory: %windir%\system32\spool\drivers\x64\3
Note that %windir% is a system variable that points to the location of the Windows directory. For most systems this will be C:\Windows. You can click Start, Computer and type %windir%\system32\spool\drivers\x64\3 in the address bar and it will find the right place.
This can be done from a DOS prompt if DOS is opened with the "run as administrator" command, or from explorer with a copy and paste. Depending on your UAC settings you may need to provide confirmation. Also allow the current files to be overwritten if prompted.
This patch is not required and should not applied to a 32 bit version of Vista or Windows 7.
Thanks to extraordinary Microsoft engineer Alan Morris for guidance for the patch.
Update - the following are more detailed installation instructions:
Download the patch from here. Now click on the file and open it, then extract the patch to some directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative DOS prompt by clicking on Start, All Programs, Accessories, then right click on CMD.EXE and select Run as Administrator. Click in the DOS box then type the following:
MD c:\temp
CD \temp
Now extract the patch files into the c:\temp directory (extract all, chose c:\temp as the destination).
[Update - Windows security settings may prevent these files from being used, please open Computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties. If there is a message in Properties indicating the file was downloaded from the internet and may be blocked then unblock the file before proceeding.]
Next click back in the administrative DOS prompt and type the following: (stuff in green is comments, do not type them...)
DIR *.dll (this is just to verify the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others.)
Net stop spooler (makes sure the files are not in use.)
Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
Copy hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000)
Net Start Spooler
Exit
[Edit - note that these DLL files will already be in the directory. You will get a warning asking if it is OK to overwrite the files, say "yes".]
At this point the patch is installed and ready to print.
Note that the printers here do not support USB connections, they have only parallel ports. [Edit - if your printer does have a parallel port use it, this will likely be much less problematic than using a USB-Parallel converter.] If you use a USB-parallel converter make sure it is supported in your operating system. The following posts are flagged with USB-parallel cables that are reported to work in Windows 7.   A driver is required for the USB-parallel converter in addition to the driver for the printer. For supported converters this is typically supplied automatically in Windows 7. Note: the proper port to select for the USB-Parallel converters is often USB001:. I have heard of some cases where the port was USB002: or LPT3: as well. If the port you are using does not succeed (after applying the patch) try changing the port by going to Start, Devices and Printers, right click on your printer and select Printer Properties, then click on the Ports tab.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
This question was solved.
View Solution.
Attachments:
DJ_Patch.zip ‏34 KB

Just want to send a thanks. Purchased a new HP computer with 64 bit Windows 7 and haven't been able to get my 722c to work. This patch worked like a charm!

A problem with Client Security Solution patch for Mozilla Firefox3

After I updated Client Security Solution to 8.20, the password manager cannot work in FF3 again.When I tried to reinstall the patch, it asked me whether to overwrite the files or cancel. Then it indicates 'This patch has already been installed on this computer', but the problem exsits.

Borntofly, I am glad that you brought this up as I have not been able to successfully use FF3 with CSS 8.1 or 8.2 and have provided feedback in this thread:
http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&thread.id=937&view=by...
As much as I would like to upgrade to FF3, I have not had any success in either using the manual configuration changes noted in the above thread or by using the CSS Patch for FF3 provided by Lenovo on 8/6/08 found here:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70132
This patch appears to duplicate the manual efforts provided by member KTP in message 12 in the above provided link from what I can see.
I have never had an issue using the TV password manager and IE7. It is a very reliable combination.
I have no issues at all using FF 2.0.0.16, CSS 8.1 or 8.2 (now on 8.2), and Thinkvantage (TV) Password Manager 3.00.0106.00 (came with CSS 8.2). I have never had Lenovo Password Manager on my T60. Everything works reliably well with this combination.
In 3 hours of work yesterday, I was able to get TV Password Manager to show up in the FF3 add-ons as TV Password Manager 3.01 and this is the only way I was able to make it work, but only for a single browser session:
1. Tools --> Add-Ons
2. Disable TV Password Manager, then restart FF3
3. Tools --> Add-Ons
4. Enable TV Password Manager, then restart FF3
5. TV Password Manager will work for the duration that I am using the browser session
Once I close FF3 and reopen it, TV Password Manager no longer works. The only method I have found to "reset" everything is to perform the above sequence, but again it only works for the single browser session. It is very consistent. Although in does not show this in the Add-Ons page, it almost appears that the TV Password Manager add-on is disabled after I close the browser and needs to be manually disabled then enabled as noted above. If this is due to a conflict with other software on my laptop, I have not been able to determine this.
In my efforts yesterday, I spent time uninstalling CSS 8.1 or 8.2, FF, and even removed registry entries related to these packages in order to start with a fresh install, all without any success. I tried fresh installations and added the manual changes promoted by KTP and also tried fresh installations using the Lenovo patches, all without success. I made attempts to troubleshoot to root cause by removing all add-ons except TV Password Manager, and also tried preventing certain software from installing at startup via msconfig, as well as multiple settings changes within FF3, all to no avail. Again FF 2.0.0.16 continues to work very well with little effort on my part. I simply install the software and ensure that TV Password Manager 2.0 in installed in the add-ons and that's it.
In the above FF3 thread, it appears that others have had success with KTP's changes so I am a little frustrated that I cannot make FF3 and TV Password Manager work reliably. I have FF2 and IE7 working so I have plenty of good alternatives at this time. I will post this at the FF3 above as well to see if anyone has any feedback.
Moderator(s), do you wish for this thread to be integrated in the original thread for this issue?
T60, 8744-5BU: 2.0 GHz T7200, 4 GB RAM, 15.4" WSXGA+, 1680x1050 ATI Mobility Radeon X1400, Win 7 Ultimate w/SP1 - 64-bit

ALL Required Patches for EBS 11i AIX

Hi Everyone,
We have an on-going (UAT) user acceptance test for a new setup EBS 11i on Aix 5L, for FINANCIAL MODULES(GL,AP,AR,CE,FA).
Currently, we still encountered error or bugs and need to apply some patch one by one.
What I want is a proactive way, which is a one time application of all the patches needed to run EBS 11i error free.
Where can I find the recommended list of all patches that should be applied on EBS 11i, and
How do I reconcile it with the output of the following....
The following are the output of
1. opatch lsinventory
2. ad_applied_patches
3. ad_bugs
1>
Installed Patch List:
=====================
1) Patch 2701372 applied on Thu Jul 14 04:25:16 GMT+08:00 2005[ Base Bug(s): 2701372 ]
2) Patch 4081980 applied on Thu Jul 14 04:24:49 GMT+08:00 2005[ Base Bug(s): 4081980 ]
3) Patch 4385803 applied on Thu Jul 14 04:24:20 GMT+08:00 2005[ Base Bug(s): 4385803 ]
4) Patch 4252938 applied on Thu Jul 14 04:23:46 GMT+08:00 2005[ Base Bug(s): 4252938 3787344 3669454 ]
5) Patch 4167403 applied on Thu Jul 14 04:23:08 GMT+08:00 2005[ Base Bug(s): 4167403 ]
6) Patch 3691672 applied on Thu Jul 14 04:22:33 GMT+08:00 2005[ Base Bug(s): 3691672 ]
7) Patch 3682068 applied on Thu Jul 14 04:22:04 GMT+08:00 2005[ Base Bug(s): 3682068 ]
8) Patch 3202151 applied on Thu Jul 14 04:21:29 GMT+08:00 2005[ Base Bug(s): 3202151 ]
9) Patch 4430748 applied on Thu Jul 14 04:20:56 GMT+08:00 2005[ Base Bug(s): 4161400 4193295 3949307 4141415 4161315 4017526 4049345 4430748 4199440 ]
10)Patch 4155285 applied on Thu Jul 14 04:15:56 GMT+08:00 2005[ Base Bug(s): 3900237 ]
11)Patch 4140446 applied on Thu Jul 14 04:15:23 GMT+08:00 2005[ Base Bug(s): 3794402 ]
12)Patch 4145742 applied on Thu Jul 14 04:14:50 GMT+08:00 2005[ Base Bug(s): 3467622 ]
13)Patch 4121240 applied on Thu Jul 14 04:14:16 GMT+08:00 2005[ Base Bug(s): 2785957 ]
2>
3026~~3180164~ONE-OFF~~DRV~13-MAY-07~5~13-MAY-07~5~~~~~
26~~4029076~ONE-OFF~~DRV~13-MAY-07~5~13-MAY-07~5~~~~~
27~~4318672~ONE-OFF~~DRV~13-MAY-07~5~13-MAY-07~5~~~~~Y
28~~4318672~ONE-OFF~~DRV~13-MAY-07~5~13-MAY-07~5~~~~~
29~~3582074~ONE-OFF~~DRV~13-MAY-07~5~13-MAY-07~5~~~~~Y
30~~3582074~ONE-OFF~~DRV~13-MAY-07~5~13-MAY-07~5~~~~~
1026~~3942506~ONE-OFF~~DRV~13-MAY-07~5~13-MAY-07~5~~~~~
2026~~3180164~ONE-OFF~~DRV~13-MAY-07~5~13-MAY-07~5~~~~~Y
4026~~3480000~MAINTENANCE-PACK~11.5.10~DRV~13-MAY-07~5~13-MAY-07~5~~~~~Y
5026~~3480000~MAINTENANCE-PACK~11.5.10~DRV~15-MAY-07~5~15-MAY-07~5~~~~~
6026~~4398340~ONE-OFF~~DRV~10-APR-08~5~10-APR-08~5~~~~~
22~~3993353~ONE-OFF~~TXT~13-MAY-07~5~13-MAY-07~5~~~~~
23~~4712852~PATCH-SET~~TXT~13-MAY-07~5~13-MAY-07~5~~~~~
24~~4709948~ONE-OFF~~DRV~13-MAY-07~5~13-MAY-07~5~~~~~Y
25~~4709948~ONE-OFF~~DRV~13-MAY-07~5~13-MAY-07~5~~~~~
31~~3942506~ONE-OFF~~DRV~13-MAY-07~5~13-MAY-07~5~~~~~Y
16 rows selected.
3>
746~1725990~11i~13-MAY-07~5~13-MAY-07~5
747~1728812~11i~13-MAY-07~5~13-MAY-07~5
748~1731943~11i~13-MAY-07~5~13-MAY-07~5
749~1734372~11i~13-MAY-07~5~13-MAY-07~5
750~1734536~11i~13-MAY-07~5~13-MAY-07~5
751~1735101~11i~13-MAY-07~5~13-MAY-07~5
752~1735322~11i~13-MAY-07~5~13-MAY-07~5
753~1737919~11i~13-MAY-07~5~13-MAY-07~5
754~1738341~11i~13-MAY-07~5~13-MAY-07~5
755~1738507~11i~13-MAY-07~5~13-MAY-07~5
756~1741436~11i~13-MAY-07~5~13-MAY-07~5
757~1741494~11i~13-MAY-07~5~13-MAY-07~5
758~1741503~11i~13-MAY-07~5~13-MAY-07~5
759~1741512~11i~13-MAY-07~5~13-MAY-07~5
760~1741526~11i~13-MAY-07~5~13-MAY-07~5
761~1742248~11i~13-MAY-07~5~13-MAY-07~5
762~1742722~11i~13-MAY-07~5~13-MAY-07~5
763~1745670~11i~13-MAY-07~5~13-MAY-07~5
764~1746630~11i~13-MAY-07~5~13-MAY-07~5
765~1746771~11i~13-MAY-07~5~13-MAY-07~5
766~1748907~11i~13-MAY-07~5~13-MAY-07~5
767~1751739~11i~13-MAY-07~5~13-MAY-07~5
768~1752213~11i~13-MAY-07~5~13-MAY-07~5
769~1753281~11i~13-MAY-07~5~13-MAY-07~5
770~1753319~11i~13-MAY-07~5~13-MAY-07~5
771~1753792~11i~13-MAY-07~5~13-MAY-07~5
772~1755752~11i~13-MAY-07~5~13-MAY-07~5
773~1757936~11i~13-MAY-07~5~13-MAY-07~5
774~1761260~11i~13-MAY-07~5~13-MAY-07~5
775~1763615~11i~13-MAY-07~5~13-MAY-07~5
776~1767456~11i~13-MAY-07~5~13-MAY-07~5
777~1768073~11i~13-MAY-07~5~13-MAY-07~5
778~1768074~11i~13-MAY-07~5~13-MAY-07~5
779~1768103~11i~13-MAY-07~5~13-MAY-07~5
780~1769745~11i~13-MAY-07~5~13-MAY-07~5
781~1770795~11i~13-MAY-07~5~13-MAY-07~5
782~1776996~11i~13-MAY-07~5~13-MAY-07~5
783~1777203~11i~13-MAY-07~5~13-MAY-07~5
784~1778782~11i~13-MAY-07~5~13-MAY-07~5
785~1782567~11i~13-MAY-07~5~13-MAY-07~5
786~1784497~11i~13-MAY-07~5~13-MAY-07~5
787~1785083~11i~13-MAY-07~5~13-MAY-07~5
788~1786880~11i~13-MAY-07~5~13-MAY-07~5
789~1787351~11i~13-MAY-07~5~13-MAY-07~5
790~1787358~11i~13-MAY-07~5~13-MAY-07~5
791~1788190~11i~13-MAY-07~5~13-MAY-07~5
792~1791486~11i~13-MAY-07~5~13-MAY-07~5
793~1794893~11i~13-MAY-07~5~13-MAY-07~5
794~1802003~11i~13-MAY-07~5~13-MAY-07~5
795~1803045~11i~13-MAY-07~5~13-MAY-07~5
796~1805222~11i~13-MAY-07~5~13-MAY-07~5
797~1805830~11i~13-MAY-07~5~13-MAY-07~5
798~1805831~11i~13-MAY-07~5~13-MAY-07~5
799~1806627~11i~13-MAY-07~5~13-MAY-07~5
800~1809750~11i~13-MAY-07~5~13-MAY-07~5
801~1811121~11i~13-MAY-07~5~13-MAY-07~5
802~1811575~11i~13-MAY-07~5~13-MAY-07~5
803~1812244~11i~13-MAY-07~5~13-MAY-07~5
804~1814852~11i~13-MAY-07~5~13-MAY-07~5
805~1815014~11i~13-MAY-07~5~13-MAY-07~5
806~1823234~11i~13-MAY-07~5~13-MAY-07~5
807~1830543~11i~13-MAY-07~5~13-MAY-07~5
808~1831133~11i~13-MAY-07~5~13-MAY-07~5
809~1834093~11i~13-MAY-07~5~13-MAY-07~5
810~1835722~11i~13-MAY-07~5~13-MAY-07~5
811~1836705~11i~13-MAY-07~5~13-MAY-07~5
812~1839924~11i~13-MAY-07~5~13-MAY-07~5
813~1840231~11i~13-MAY-07~5~13-MAY-07~5
814~1854683~11i~13-MAY-07~5~13-MAY-07~5
815~1854718~11i~13-MAY-07~5~13-MAY-07~5
816~1854969~11i~13-MAY-07~5~13-MAY-07~5
817~1855429~11i~13-MAY-07~5~13-MAY-07~5
818~1859637~11i~13-MAY-07~5~13-MAY-07~5
819~1861175~11i~13-MAY-07~5~13-MAY-07~5
820~1862344~11i~13-MAY-07~5~13-MAY-07~5
821~1863390~11i~13-MAY-07~5~13-MAY-07~5
Thanks a lot

Hi again hussein,
The metalink note that list all the required patches for 11i which you gave me is not accessible :(
It just pointing be back to the metalink homepage, would you know if there is a right path for this docs?
>>>
Subject: Latest 11i Applications Recommended Patch List
Doc ID: Note:123456.1 Type: ALERT
Last Revision Date: 04-JUN-2008 Status: PUBLISHED
Please Note:
The eBusiness Suite Recommended Patch List ( Metalink Note 123456.1 ) has moved (direct link).
*** The direct link is invalid I guess :(
Thanks again

Has someone applied the one off patch for-ONS bug 5749953 SIGBUS ERROR

Hello all,
Env:: 10g on Soalris
I need to apply the one-off patch for
Bug:5749953 -- ONS SIGBUS ERROR AFTER INSTALL PATCHSET 10.2.0.3 FOR CRS
Usually for any CPU we issue opatch apply from the patch directory.
and its mentioned in the readme.html as well.
But for this one off patch, there isn't anything mentioned in the readme.html.
All it says is
# 6. Patch the Files
#    6.1 Patch the CRS home files
#    After unlocking any protected files and saving configuration settings
#    you are now ready to run opatch using the following command.
#    As the Oracle Clusterware (CRS) software owner;
#    % opatch apply -local -oh <CRS_HOME>
#    Note: In configuration A, invoke this only on one node.
#    6.2 Patch the RDBMS home files.
#    Alert: The RDBMS portion can only be applied to an RDBMS home that
#          has been upgraded to 10.2.0.3.0.
#    For additional information please read Note.363254.1;
#    Applying one-off Oracle Clusterware patches in a mixed version home
#    environment
#    As the RDBMS software owner;
#    % opatch apply custom/server/5749953 -local -oh <RDBMS_HOME>
#    Note: In configuration A, invoke this only on one node.Could someone let me know from where i should give 'opatch apply' if patch.zip files are unzipped in /export/home/oracle/5749953 ? TIA,
JJ

The patch can always be installed in 2 ways.
1. Do a cd and then run opatch
cd <patchlocation>
opatch apply
2. Else specify the patch location as an argument
opatch apply <full path to the patch i.e the one you do cd above> ...
Both the above styles yield same result.
VJ

CPU patches for 12.1.3 application

Hi Experts,
We have 12.1.3 application and 11.1.0.7.0 Database.
I need latest CPU patches for our Application, i dont know how to search.
Can you please tell me which are latest patches for my application.
Waiting for reply.
Thanks.

Hi again;
You can also visit:
http://www.oracle.com/technetwork/topics/security/alerts-086861.html
You need to make search as Oracle Critical Patch Update Advisory - October 2011 which direct you:
http://www.oracle.com/technetwork/topics/security/cpuoct2011-330135.html << from here you can check patch for
Oracle E-Business Suite Release 12, versions 12.0.6, 12.1.2, 12.1.3 E-Business Suite
Oracle Database 11g Release 1, version 11.1.0.7 Database
Regard
Helios

CPU patch for windows

Hi ,
Is the oracle CPU patchs released separately for windows platform (like how they release it for UNIX flavours ).... or is it only Bundle patches for windows . I did some metalink search and google search and my understaing is there is no CPU patches for windows ... we may need to use only Bundle patches for windows platfrom . If so , does Bundle patch include CPU patches ?

Hi;
You need to check below link and you need to find patch number from notes and you need to check patch from metalink. If the patch is not avaliable for Windows platform than you need to rise SR and get patch from support
http://www.oracle.com/technetwork/topics/security/alerts-086861.html
Regard
Helios

AAC/MPEG-4 support patch for abcde

I got bored to day and made up this patch for abcde that adds support for AAC using the M4A extension.
It uses FAAC as the encoder and also patches abcde to version 2.2.3
I have not tested it yet so bear with me...i'll post my test results later.
You'll have to manually add the "M4AENCOPTS=" variable to the config
usage is: abcde -o m4a
UPDATED: fixed a plethora of typos
another side note is the fact FAAC must be compiled with mpeg-4 support, the Archlinux package for FAAC isn't, so therefore this could be a problem unless you compile FAAC yourself. I submitted a feature request to get mp4 support added.
the following is the 2.2.0 to 2.2.3 update+AAC patch. I will submit a AAC patch for the newest release to the developers of abcde later on.
--- abcde-old-2.2.0 2005-03-08 12:42:14.000000000 -0500
+++ abcde2 2005-03-08 12:11:07.000000000 -0500
@@ -11,7 +11,7 @@
# Copyright for this work is to expire January 1, 2010, after which it
# shall be public domain.
-VERSION="2.2.0"
+VERSION="2.2.3"
usage ()
@@ -21,7 +21,7 @@
echo "-1 Encode the whole CD in a single file"
echo "-a <action1[,action2]...>"
echo " Actions to perform (cddb,read,normalize,encode,tag,move,playlist,clean)"
-echo "-A Experimental actions (retag, transcode)"
+#echo "-A Experimental actions (retag, transcode)"
echo "-b Batch mode: enable album normalization and nogap encoding"
echo "-c <file>"
echo " Specify a configuration file (overrides system and user config files)"
@@ -366,6 +366,9 @@
mpc)
run_command tagtrack-$1 true
+ m4a)
+ run_command tagtrack-$1 true
+ ;;
esac
done
@@ -489,6 +492,10 @@
## FIXME ## to the encoder ends up empty.
run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
+ m4a)
+ # AAC/MPEG-4 format (.m4a) is done locally, with inline tagging.
+ run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $M4AENCODER $M4AENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -w "$IN" -o "$OUT"
+ ;;
esac
done
# Only remove .wav if the encoding succeeded
@@ -737,6 +744,9 @@
if [ "$INTERACTIVE" = "y" ]; then
while [ "$DONE" != "y" ]; do
read ERASEPLAYLIST
+ if [ "$ERASEPLAYLIST" = "" ]; then
+ ERASEPLAYLIST=e
+ fi
case $ERASEPLAYLIST in
e|E|a|A|k|K) DONE=y ;;
@@ -764,7 +774,7 @@
ARTISTFILE=$(mungefilename "$TRACKARTIST")
# If we want to start the tracks with a given number, we need to modify the
# TRACKNUM value before evaluation
- if [ -n $STARTTRACKNUMBER ] ; then
+ if [ -n "$STARTTRACKNUMBER" ] ; then
# Get the trackpadding from the current track
CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - 1 ))
@@ -843,7 +853,7 @@
cdparanoia|debug)
if [ "$WEHAVEACD" = "y" ]; then
vecho "Querying the CD for audio tracks..."
- TRACKS=$( $CDROMREADER -Q 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
+ TRACKS=$( $CDROMREADER -d $CDROM -Q --verbose 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
CDPARANOIAAUDIOTRACKS="$TRACKS"
else
if [ -f "$ABCDETEMPDIR/status" ] && checkstatus cdparanoia-audio-tracks ; then
@@ -1354,7 +1364,7 @@
EDITCDDB=n
fi
if [ "$EDITCDDB" = "y" ]; then
- CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
+ CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d" " -f1);
# Use the debian sensible-editor wrapper to pick the editor that the
# user has requested via their $EDITOR environment variable
@@ -1387,7 +1397,7 @@
# Some heuristics first. Look at Disc Title, and if it starts with
# "Various", then we'll assume Various Artists
- if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2 -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
+ if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
echo "Looks like a Multi-Artist CD" >&2
VARIOUSARTISTS=y
else
@@ -1470,7 +1480,7 @@
echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
- if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d " " -f 1) ]; then
+ if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d" " -f1) ]; then
# This works but does not have the necessary error checking
# yet. If you are familiar with the CDDB spec
# (see http://www.freedb.org/src/latest/DBFORMAT)
@@ -1577,7 +1587,7 @@
WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
OUTDATA="$ABCDETEMPDIR/track$UTRACKNUM.$OUTPUTTYPE"
if [ -r "$CDDBDATA" ]; then
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d [:cntrl:])
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d [:cntrl:])
echo "Grabbing track $UTRACKNUM: $TRACKNAME..." >&2
else
echo "Grabbing track $UTRACKNUM..." >&2
@@ -1692,6 +1702,7 @@
SPEEXENCODERSYNTAX=default
MPPENCODERSYNTAX=default
NORMALIZERSYNTAX=default
+M4AENCODERSYNTAX=default
OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
# Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
@@ -1738,6 +1749,7 @@
SPEEXENC=speexenc
# mpp (Musepack)
MPPENC=mppenc
+M4AENC=faac
ID3=id3
ID3V2=id3v2
@@ -1773,6 +1785,7 @@
SPEEXENCOPTS=
# mpc
MPPENCOPTS=
+M4AENCOPTS=
ID3OPTS=
ID3V2OPTS=
@@ -2039,6 +2052,7 @@
spx) [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc ;;
mpc) [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc ;;
+ m4a) [ "$M4AENCODERSYNTAX" = "default" ] && M4AENCODERSYNTAX=faac ;;
*) echo "abcde error: Invalid OUTPUTTYPE defined" >&2
exit 1
@@ -2100,6 +2114,12 @@
MPPENCODER="$MPPENC"
esac
+case "$M4AENCODERSYNTAX" in
+ faac)
+ M4AENCODEROPTS="$M4AENCOPTS"
+ M4AENCODER="$M4AENC"
+ ;;
+esac
# and which tagger
@@ -2144,7 +2164,7 @@
${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC}
${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT}
${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED}
- ${NEEDVORBISGAIN+$VORBISGAIN}
+ ${NEEDVORBISGAIN+$VORBISGAIN} $M4AENCODER
do
# Cut off the command-line options we just added in
X=$(echo $X | cut -d' ' -f2)
@@ -2207,37 +2227,6 @@
esac
fi
-if [ "$STRIPDATATRACKS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
- case "$CDROMREADERSYNTAX" in
- cdparanoia|debug)
- # cdparanoia can query the CD, so let's process the TRACKQUEUE list with the results.
- if checkstatus cdparanoia-audio-tracks; then
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-audio-tracks )
- else
- ## FIXME ##
- vecho "Querying the CD to obtain a list of valid audio tracks..."
- $CDROMREADER -Q > $ABCDETEMPDIR/cdparanoia-query 2>&1
- # Obtain a list of valid audio tracks from the results of the query
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-query | egrep '^[[:space:]]+[[:digit:]]' | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
- fi
- # Obtain the track padding value from the before-processing list and pad the CD list
- TRACKNUMPADDING=$( echo $TRACKQUEUE | awk '{print $1}' | tr -d " n" | wc -c )
- for TRACK in $CDTRACKQUEUE ; do
- TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
- PADNEWTRACKQUEUE=$(echo $PADNEWTRACKQUEUE $TRACKNUM)
- done
- CDTRACKQUEUE=$PADNEWTRACKQUEUE
- # Now, compare if the values in the list are valid tracks in the CD
- for TRACK in $TRACKQUEUE; do
- if echo $CDTRACKQUEUE | grep $TRACK >/dev/null ; then
- NEWTRACKQUEUE="$NEWTRACKQUEUE $TRACK"
- fi
- done
- TRACKQUEUE="$NEWTRACKQUEUE"
- esac
-fi
# Create playlist if needed (backgroundable) and start reading in tracks
@@ -2446,7 +2435,7 @@
# TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${UTRACKNUM} + 0))
TRACKNUM=$UTRACKNUM
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2 -d= | tr -d [:cntrl:] | sed 's/ +$//')
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d [:cntrl:] | sed 's/ +$//')
splitvarious
fi
fi
the patches can also be found here http://www2.rudefyet.com:8080/patch
please post any other issues you have

not yet, i'm going to work all the kinks out before i submit it
as of right now I noticed some major typos, on my part, that cause it to fail...i'm working on that right now

Not able to find out the OCT 2012 CPU patch for 11.2.0.3

Hi
I am trying to download the OCT 2012 CPU patch for the 11.2.0.3 to install on Linux x86-64 which is having OS of RHEL 5.7. I am able to get the OCT 2012 PSU patch which include the CPU patch too.
Database 11.2.0.3.4 PSU Patch 14275605, or
GI 11.2.0.3.4 PSU Patch 14275572, or
But I just require only the CPU patch. Can anyone provide me the patch number or some link where I can download the Oracle CPU patch OCT 2012

The given link take to the window where CPU patch for all the quarter available.
The Critical Patch Updates released to date are listed in the following table.
Critical Patch Update Latest Version/Date
Critical Patch Update - October 2012 Rev 1, 16 October 2012
Critical Patch Update - July 2012 Rev 1, 17 July 2012
Critical Patch Update - April 2012 Rev 2, 19 July 2012
If I click on Critical Patch Update - October 2012 its takes to the window for selectin the database version (11.2.0.3). From there it goes to the Patch Set Update and Critical Patch Update October 2012 Availability Document [ID 1477727.1] which I had already checked.
There for the database products it shows the below option.
Table 9 Patch Availability for Oracle Database 11.2.0.3
+*<moderator edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>*+
It doesnt have the sepreate CPU patch. The below CPU patch is for the OC4J. I had a check.
Thanks
SHIYAS M

Notifications not being generated for alerts generated by rules.

I'm using SCOM 2012 R2 and have configured an alert generating rule to create alerts when specific events occur in a windows event log.
The rule works fine, alerts are generated as expected.
I have also configured subscriptions/subscribers/channels to send notifications via email and SMS (via script in command channel) however even with the criteria set to send on all alerts, I only receive notifications for alerts generated by monitors (so
I know the subs and channels do function)
It seems like some sort of workflow issue where alerts generated by a rule fail to create a notification.
Is there any logging I can enable to see what's happening here?
Any other ideas?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

Patch for modbin6-1.00.38.exe is out.. "2MBIOS.BIN can't open!" Solved.

Hi mates,
ive decide to make a patch for modbin6 1.00.38 to improve stability and minise risk of modding the BIOS. for users which is reading this post if never heard about MODBIN better avoid reading below. its nice program for basic BIOS mod, simple to use, but very danger in the same time couse mess with BIOS and inproperty using may couse disaster. im not gona advert or to invite persons to use it. just wana make this program to be used normally to bring stability and minise risk of making corrupted BIOSes.. for persons which is already using it and have experience with him or with person Enthu which is wana try it and they dont worry if mobo may caouse for trash. there is 2 reasons to making this patch.
1. couse sometimes im using it there is features on it wchich gives basic stuffs, unlocking hidden features locked by manifacturer(sometimes really usefull especially for DIMM Vcore..). so there is a nasty bug on it which gona explain later. most of persons who is using MODBIN know about it. so that patch will spend me alot of time and minimise risk of mistake during avoiding bug couse operation need several procedure and automatised will risk free and much fastern.
2. to bring ability for most stable operations to persons which is already using it when need.
but lets talk about the patch. everyone know that nasty issue with MODBIN(made it by Borg N1,part from his collection). bug is program wont safe BIOS file and quiting with Abnormal program termination.... gives this one message: !!!File
2MBIOS.BIN can't open!Thanks for using ModBin6 1.00.38 how nice ...
here is Borg N1 advices:
Quote from: Borg Number One on 16-July-05, 05:24:51
Hi.
It is a kind of sad fact that many users just know how to use the mouse and keyboard.
Well, you have to configure your config.sys (Win9x/ME) or config.nt to run MODBIN6
(e.g. MODBIN6 2.01.01 (06/25))
in Windows prompt/console without problems.
The " FILES " & " BUFFERS " values are the important values.
http://www.xtremesystems.org/forums/showthread.php?t=45538
http://www.xtremesystems.org/forums/showthread.php?t=63210&highlight=config.nt
+++ BNOBTC & BNOBLG +++
http://bnobtc.pix-art.com
Borg advices is good but unfortuanly doesnt fix that bug... seems author dont have much idea why this is happend...error is constant ... Pure DOS also can't help... i wana add few more tips to the Borg's ones to improve stability when using modbin, after that will talking about patch.
TIP: navigate to this folder and open config.nt file: %SystemRoot%\system32\config.nt
at the end of file add this ones:
dos=high, umb
device=%SystemRoot%\system32\himem.sys /CPUCLOCK:ON /HMAMIN=64
FILES=40
BUFFERS=40
STACKS=9,256 -----> Preserving 039A-045Eh 3,152 Sys 039Ah Stacks, 0552h DOSX
Also MODBIN doesnt work well with long filenames.... etc "document and settings\my profile\desktp\modblabla" if not gona work property and there is a big chance of failure will load but after saving will have problems to update BIOS "core"(original.tmp) so always use 8.3 syntax standart .... best way from root directory make subdir whcih name to no NOT exceed 8 symbols... etc C:\123,C:\MYFLASH,C:\ROFL
without TIPs it is really big gamble with BIOS....
Aslo that will prevent Stack Overflow error when BIOS is loading....
NOTE: To activate changes just quit from any DOS interpretators like(4nt,command.com,cmd and so on). and re-run it. Reboot OS is not requred.
here how to do:
Also when executing MODBIN put below executable file this ones without quotes "loadfix forcedos modbin6-1.00.38.exe"
and ofcourse nasty error is waiting us... "2MBIOS.BIN can't open!Thanks for using ModBin6 1.00.38"
Patch which iv maked gona RIP this error forever.
Download: modbin6_1.00.38
Download: MODBINPATCH
What patch need? and how to use it? I named patch "Dynamic Patch for modbin" Couse isnt make modification on MODBIN program but momory his parent process when is loaded into memory.
tips suggested below is recommended but not nesecery for the patch.. patch need MODBIN and your BIOS file (modbin6-1.00.38.exe and mybios.bin) to be copied to systemroot drive(usually C) in folder MSI etc put modbin6-1.00.38.exe and mybios.bin(BIOS which you gona mod) to C:\MSI
Patch make checking if folder doesnt match will not continue....
How to use it..... Copy modbin6-1.00.38.exe and mybios.bin to C:\MSI, then from command prompt navigate to C:\MSI and execute "loadfix forcedos modbin6-1.00.38.exe" after that load your BIOS file... when loading is complete navigate to your patch folder and execute patchMSI.exe.... takes 10 seconds to complete after that make active "white" window and enter "Q" then hit ENTER key both windows will be closed, after that return to your modbin window, make what you gona make and save BIOS file like normal procedure... Method is founded and tested by me from years below never let me down(never brings corrupted BIOS), but just today ive made patch couse was too lazy... also Borg's MODBIN can work with most of all chipsets which is using AWARD Modular based... NOTE: K9 isnt tested. the most of here you can view how exacly to do it and differents with and without patch:
here is one more think some time maybe usefull from me:D
Here is 1st little short trick:(no analog anywhere, like patch only here can be found if accepted):
How to reset BIOS if you have nothink? Examples if you are administrator/PC-support or any and must fix same PC but the BIOS has an password?! And you dont have permision to open Case to reset CMOS(couse PC has an sticker with Warantly (and removing that sticker couse lost pc warrantly) You need access to BIOS to re-check,configure somethink there but its password protected. anyway there could be many situation. what we need? nothink special just bootable DOS(or analog- PC-DOS or whatever,doesnt matter where will boot(cd,flash disk,hdd)), no extended commands.[io.sys(jo.sys),command.com] - files requred to boot Here we go:
boot from desired device.when you see command prompt etc.: "A:\,C:\"
We will write a program without any languich..directly in PC code..(without compilator), direct in machine code.
write this:
copy con ffs.com|ffs *comment None
176.230p144144230q195 *comment Hold "ALT" and write number
^Z *comment "CTRL+Z" then hit "Enter"
Explain:
copy(internal command)
con (command line switch)
^Z (CTRL+Z)
NOTE: Numbers in second line must be written with holdon "ALT" key and specified numbers.(ASCI Code). Non numbers symbols is normal keyboard selection. on input display should look like:
copy con ffs.com|ffs
░.цpРРцq├
^Z
Program is 9 bytes long... (simple but high effective)
Thats it.Reboot Computer... password is gone. CMOS is reseted to default values. Tested on Award 4.0,6.0, AMI BIOS. Break all..
and finaly again:
**To All readers of this thread: Please note that this thread is with regards to Self-Modding BIOS and are of NO Official Testings from MSI. MSI will not be responsible for ANY Damage caused from requesting these self modded BIOSes! Please mind that you'll ONLY request and flash AT YOUR OWN RISK!!!** also MODBIN Author(Borg N1) and me is dont are NOT responsible for ANY Damage caused by MODBIN or Add On Patch. (i didnt think there is risk exit must must said that warning....couse playing with BIOS is always risky). Happy Tweaking.

Well, I was wondering if the system not allowing the tty to change ownership -- but root also has the problem.
You might try checking which shell is set for your users in /etc/passwd, and then check that the shell really exists at the specified path, and that it is executable. You might also check that the home directory for you users (also specified in /etc/passwd) is mounted and your user has the appropriate rights to that directory.
Other than that, I am running out of altitude, airspeed and ideas all at the same time. There was one thing in your trace I did not understand. Why is your system looking to the floppy drive? I wonder if that is contributing to the problem.

Can someonoe please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra softw

Can someonee please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra software. My software other than that problem works fine.

Couldn't complete what request? Way more information please.
What operating system?

Patch for Dreamweaver CS5 or 6 from Poodle Vulnerability

GoDaddy ran a security patch for Poodle and now Dreamweaver can't connect. FTP over SSL/TLS explicit encryption is used. Is there a patch from Adobe for Dreamweaver?

The perpetual license of CS6 is essentially Adobe's response to those folks who absolutely refuse to switch to the Creative Cloud Subscription plans. It's actually 3 versions (4 if you count Cloud CS6) removed from "current". Even though it's still available for purchase, it hasn't been receiving any updates and is getting further and further behind DWCC as time goes by.
Adobe has a phone number, you just need to dig...
Contact Customer Care
Click Dreamweaver > How-to's and troubleshooting > Troubleshoot > click the big blue Still Need Help button
That will give you Chat (if available) Phone (region specific) and Forums links

Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

hello,
After installing the Adobe reader, I got the following error message:
Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

The latest iTunes wiped out my apps for my 2G iPod Touch by overwriting updates which are no longer compatible with iOS 4.2. I tried to restore to an earlier version with no success. Is there any way to download the older versions of apps which are comp

The latest iTunes software wiped out my apps for my 2G iPod Touch by overwriting newer releases of the apps which are not compatible with iOS 4.2.1. I tried to restore the iPod to an earlier version without success. Is there any way to download older versions of my apps which are compatible with my older iPod?

Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

Patch for alert 1203/0 IP Fragment Overwrite

Similar Messages

Maybe you are looking for