Patch for Business explorer

hai all
please suggest me where i have download patch of business explorer, i am installing SAP gui 7.10 on windows with patches
please help me out
thanxs
deepak

Hello. Try to use search ))
Download it from :
https://service.sap.com/swdc -->
download --> support packages and patches -->Entry by Application Group --> SAP Frontend Components -->
BI ADDON FOR SAP GUI -->
BI 7.0 ADDON FOR SAP GUI 7.10
BW 3.5 ADDON FOR SAP GUI 7.10
Regards.

Similar Messages

Infoobject - Setting for Business Explore and its performace

Hello BW-fans,
I am not sure, whether I am here at the right topic or this is a question for Bex-Topic. However it's something to do with data modelling so I firstly put the question here.
I have an example: the InfoObject 0CUST_HIE01 is from SAP-Standard referenced on 0CUSTOMER - it's ok. By selection at query execution, depending on the general settings for Business Explore, especial at "Query Execution Filter Val. Selectn", the content of 0CUST_HIE01 will be showed as the content of master data 0CUSTOMER or the content of 0CUST_HIE01 itself. In our data model it's two different values, so the general settings should be correctly "Only value in InfoProvider" or "only posted value for Navigation".
The problem is the perfomance when I select the filter value at query executation. With those two settings like above it'll take very long time, the voluminous data is updated in InfoProvider the slower the performance will be. In my example is showing the content of master data 0CUSTOMER due to setting "Value in master data table" is very quick but wrong and showing the "posted value in InfoProvider" is correct but it takes very long time.
My question is: Is there any method to upgrade the performance for this case?
Many thanks for answers!
Van Anh Nguyen

Hi,
To avoid that goto the maintaince of that characterstic infoobject and in the Tab Page: Business Explorer set property Filter Selection in Query Execution property to Only Values in InfoProvider so that variable will not fetch all the data instead it will display only required data.
Its becoz "This field tells you how the selection of filter values is determined when a query is executed.
When queries are executed, the selection of filter values is usually determined by the data that is selected by the query. This means that only the values for which data has been selected in the current navigation status are displayed.
In many cases, however, it can be useful to include additional values. Therefore you can also choose the settings Only Values in InfoProvider and Values in Master Data Table. If you make this selection, however, you may get the message No data found when you select your filter values."
-Vikram

"404 error" for business explorer

Hi Expert,
I installed SAP Business Objects Enterprise 4.0 SP2 for development, test and productive environment and they work fine. Development and Test BOE are installed in a single host instead the productive environment is installed in more hosts, in particular this is the configuration for the productive BOE environment:
host 1: WAS (Tomcat 6)
host 2: WAS (Tomcat 6)
host 3: CMS server 1
host 4: CMS server 2
host 5: CMS DB
After that I installed BOE, I also installed SAP Business Explorer 4.0 in the development, test and productive environment (I installed BE in host 3 and host 4). SAP Business Explorer work fine in development and test system instead is not working in the productive environment. In particular if i go to BI lunch pad (productive environment) and I selected the Business Explorer icon the following error message appear:
404 Missing Page
The page you requested is not available on this web server for one of the
following reasons:
I checked on Central Management console the status of the Business Explorer servers and they are in status "running".
I noted that in the development and test system the file explorer.war has been created from the BE installation program in the following folder :
"D:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjectsEnterprise XI 4.0\wdeploy\workdir\tomcat6\application"
instead in the productive environment the file explorer.war doesn't exist. How can I resolve this critical issue? Must I install some component also in the WAS hosts?
Thank you for your help.
Best regards
gio'

Looks like you need to do a web tier install on your tomcat server or you could copy the war file over. How did you deploy your war files when you did your initial install of BOE? Do you see an explorer folder in your tomcat6\webapps directory?
-Dave
Edited by: David Mau on Nov 7, 2011 10:44 AM

Fix patches for Business Objects Enterprise 3.1

Hi all,
which is the best way to know a new fix patch is available for the release I have installed?
Is FP 2.3 the last one available for BOBJ Enterprise 3.1? Where can I download it?
Many thanks to you all!

Hi,
To download the latest fixpack for BusinessObjects Enterprise 3.1 please follow the following steps:
a) Click on https://websmp102.sap-ag.de/bosap-downloads
b) Click on Support Software(Support Software and Corrections)
To download service packs, hot fixes, samples, and utilities for supported SAP BusinessObjects software access the SAP Software Distribution Center's Support Packages and Patches area.
c) Then click on SBOP ENTERPRISE -> BOBJ ENTERPRISE XI 3.1
d) Select the OS you want to install on
e) Then select the package from the download bad basket below.
Hope this helps.
Thanks,

User manual or ebook for Business Explorer 7.0

Dear All,
I have recently installed BI7.o server, and found some of the new features in BEx. I want to know the functionality of these new features.
Is any user Manual available which explains all the Features and Functionalities, if yes pl. help me by sending me the necessary link.
This will help me and my user to exploit the same.
Yours Truly
K Sengupto

Hi,
Its all there in SDN.
go to businees intelligence option in the site under information management below there is knlwledge center....and it will give you all the docs related to reporting.
one I am doing it for you.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90bc0c7a-031d-2a10-d7a2-9047b4d1f43f
Thanks
Ajeet

Business Explorer 3.5 compatibility with BI

Our current environment is Windows 2003/SQL Server 2005. We have a existing BW 3.5 system. Now we want to upgrade the existing BW 3.5 to BI 7.0. We don't want to install the BI_JAVA usage type this is a ABAP stack only. Now I have some questions in regards to this and if anybody can help me with this I would appreciate it greatly.
Q1. If we upgrade to BI without the BI_JAVA usage type would we be able to use all of the BW 3.5 functionality without having to install JAVA Stack?
Q2. This BW system connects to ECC 5.0 and SRM 5.0. I would like to know do we have to upgrade the Plugins to a specific support pack level in these source system (ECC5.0 and SRM 5.0)?
Q3. What is the minimum patch level for Business Explorer front end tools with version 3.x to work fine with BI 7.0 system?
If you can awnser any of these questions I would appreciate your help immensly and award you points generously as well.
Thank you,
AA

If it's MiniDV and has a FW port, I can almost guarantee it will work. Both FCE and FCP's "compatibility lists" are for the most part incomplete-- I have seen many devices not listed there work fine.

SAP Business Explorer not working

Dear Moderators,
This is to have some advice regarding the problem in my system for Business Explorer.
I am not able to open SAP Business Explorer's Query Designer, Report Designer and Web Application Designer.
Error Descriptions:
1. SAP BEx Query Designer standalone
    SAP BEx Query Designer standalone has encountered a problem and needs to close. We are sorry for the inconvenience.
2. SAP BEx Report Designer
    SAP BEx Report Designer has encountered a problem and needs to close. We are sorry for the inconvenience.
3. SAP BEx Web Application Designer
    SAP BEx Web Application Designer has encountered a problem and needs to close. We are sorry for the inconvenience.
Please inform SAP about this problem
Please describe in detailed steps how to reproduce this problem.
Attach following traces to your description, too.
4:55:36 PM.504: Info: Web Application Designer Start. Revision: 7100.1.600.466
-EXCEPTION-START- 4:55:36 PM.941: TRACE EXCEPTION startup ---
Exception Name: TypeInitializationException
Exception Message: The type initializer for 'BExUserSettings' threw an exception.
Exception    at com.sap.bi.et.Communication.CommunicationFactory.LogOn(IntPtr iWHND, Boolean iWithGUI, Boolean iKeepStatInfo, Boolean& eBackEndError, BExDebugLevel iDebugLevel)
   at com.sap.bi.et.wad.man.WADConnectionManager.AssureLoggedOn()
   at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
Full Stack:   at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
   at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
   at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----
-CALLING-FROM- 4:55:36 PM.941: TRACE EXCEPTION startup ---
   at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
   at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
   at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
Additional Information
WAD revision 7100.1.600.466
Internal Error ID: E-MAIN
Error Message: TypeInitializationException
       The type initializer for 'BExUserSettings' threw an exception.
Please do suggest some solution to this issue.
Thank you.
Mitul Modi

Hi Mitul,
Please apply note 1179647 via tx: SNOTE and also apply the manual corrections from the note.
Thanks,
Michael

Business Explorer 7.1 With Windows Server 2000?

Hi
We are looking to upgrade our SAP GUI from 620 to 710. As part of this due to other system install and upgrades we are looking to upgrade the Business Explorer from the included 3.5 to 7.1.
My issue/question is this......I am reading conflicting information, of sorts, in that in the prerequisites it states that Business Explorer 7.1 is only compatible with Windows XP or Vista. However in the installation guide for Business Explorer 7.1 in Chapter 5 it says "The user with which you are logged in to your workstation (Windows 2000, Windows XP or Windows Vista)"
To add to the confusion we access the SAP GUI, and in turn the business explorer, via Citrix and so there is no SAP software installed locally on the users desktops.
So in case I haven't yet asked the question, Is it possible to have Business Explorer 7.1 working on Windows 2000 Server? And if so is it straightforward or are there workarounds required?
Thanks in advance
Ian Newbury

We have installed the BEx Analyser version 7.1 and it works so the answer to my question is Yes.

Business Explorer 7.10 -- Bex Problem

Hi to all,
we have implemented GUI for Business Explorer 7.10.
Everything (Query Designer, Web Designer) works fine, except Bex Analyser.
When click on any item in Bex Analyser Toolbox (Excel) nothing appears.
Analyser 3.x that comes with GUI 7.10 works fine.
Our Office Version is 2003.
Anybody knows waht we have to do ?
Thanks in advance.
Horst

In continuation....
Some Insights-
The minimum frontend requirements for any backend support pack are available in table: RSFRONTENDINIT
In order to launch new Bex ,the setting has to be made in the new BEx Analyzer, and is called "Launch legacy version from RRMX"
However for some this settng worked for some it didnt ,check below link to tweak settings as needed.
Re: Launch of BEx Analyzer via RRMX, other transaction?
But the important note on FEP for Bex analyzer versions is
Note 970002 - Which BEx Analyzer version is called by RRMX?
it talks the SP level 10 and 12 to be minimum and walks you through different ways to achive the Bex version.
Re: BEx analyzer settings
BEx Query version required
Hope this helps.
Regards,
Anil

Business Explorer Role

Hi
I have assigned a role for Business Explorer : com.sap.ip.bi.business_explorer_showcase.
I got the following links:
My Portfolio | BEx Portfolio | BEx Web Analyzer | BEx Broadcaster | Collaborative BI
What is purpose of this role. Can anyone give me some documentation about the purpose of this role.
Murali.

Hi Murali,
the Business Explorer role is a show case for Information Broadcasting. My Portfolio, BEx Portfolio and Collaboriative BI have different layouts and features for working with a BW report.
Information Broadcasting is a feature of a BW system.
For more information look at
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/a5/359840dfa5a160e10000000a1550b0/frameset.htm">Information Broadcasting</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/821640b7b6dd5fe10000000a155106/frameset.htm">Configuration of the Integration of SAP BW and SAP EP</a>
Regards,
Stephan

Business Explorer Tool for SAP NetWeaver BW

Hi,
I'm not an expert SAP.
I need to know SAP BW and BEx Business Explorer Tools.
I downloaded and installed version of SAP Netweaver trial for Windows 32-bit that I found at this link:
http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/30a6dbb2-a774-2e10-ee83-9f6432973545
I thought I would find among the applications installed the BEx tools, but it is not present.
Can you please help me?
where I can download BEx tool?
There is another link where I can found the SAP Netweaver that contains BEx tool?
Thanks.
Elisa

Hi Elisa:
Please try the following steps (I'm assumming you have an "S" account to access the SAP Marketplace).
SAP GUI FOR WINDOWS.
1. Open the page https://websmp102.sap-ag.de/support
2. Enter the User and Password to access the SAP MarketPlace.
3. Click on the "Software Downloads" tab.
4. Click on the "Installation and Upgrades" sub-section.
5. From the left side menu, click on the "Browse our Download Catalog" option.
6. Click on the "SAP Frontend Components" link.
7. Click on "SAP GUI FOR WINDOWS" link.
8. Click on the "SAP GUI FOR WINDOWS 7.20 CORE" link.
9. Clcik on the "Installation" link to see the u201CSAP GUI FOR WINDOWSu201D installer available to donwload (aprox. 780 MB).
SAP GUI FOR WINDOWS (SUPPORT PACKAGES AND PATCHES).
1. Open the page https://websmp102.sap-ag.de/support
2. Enter the User and Password to access the SAP MarketPlace.
3. Click on the "Software Downloads" tab.
4. Click on the "Support Packages and Patches" sub-section.
5. From the left side menu, click on the "Browse our Download Catalog" option.
6. Click on the "SAP Frontend Components" link.
7. Click on the "SAP GUI FOR WINDOWS" link.
8. Click on the "SAP GUI FOR WINDOWS 7.20 CORE" link.
9. Click on the "Win32" link to display the list of "SAP GUI" patches available to download.
BI ADDON FOR SAP GUI (BEx Tools for BW).
1. Open the pagea https://websmp102.sap-ag.de/support
2. Enter the User and Password to access the SAP MarketPlace.
3. Click on the "Software Downloads" tab.
4. Click on the "Support Packages and Patches" sub-section.
5. From the left side menu, click on the "Browse our Download Catalog" option.
6. Click on the "SAP Frontend Components" link.
7. Click on the "BI ADDON FOR SAP GUI" link.
8. Click on the "BI 7.0 ADDON FOR SAP GUI 7.20" link.
9. Click on the "Win32" link to display the list of u201CSAP BEx Toolsu201D patches available to download.
Regards,
Francisco Milán.

Help! Windows Explorer crashes regularly when using "SharePoint" directory synced with OneDrive for Business

We are using SharePoint 2013 and I want to sync document libraries with
OneDrive for Business with my PC running Windows 7.
In general, it works, but my Windows Explorer crashes very often (after a few minutes) when I navigate in the synced directories and open files there (or copy files into them in Windows Explorer).
How can I find out what happens and how to avoid it?
remark:
We are still using Office 2007, so I installed only OneDrive for Business from the Office 2013 DVD and
deactivated all other components like Office 2013 by hand:
(so for example, the shared office feature or MS Info Path etc. were not installed)
Is there a crash log, where I can find more information about the crash?
Does OneDrive maybe need other components to be installed and can I install them without damaging my existing Office 2007 setup?

Did you check your Event Viewer for any errors during the time when Windows Explorer crashed?
Thanks for this hint!
The Log file says the following, so it seems to be WIDCOMM\Bluetooth Software\btncopy.dll
to be responsible for the crashing Windows Explorer
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Application Error" />
 <EventID Qualifiers="0">1000</EventID>
 <Level>2</Level>
 <Task>100</Task>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2014-06-27T15:06:31.000000000Z" />
 <EventRecordID>50873</EventRecordID>
 <Channel>Application</Channel>
 <Computer>COMPUTERNAME</Computer>
 <Security />
</System>
<EventData>
 <Data>explorer.exe</Data>
 <Data>6.1.7601.17567</Data>
 <Data>4d672ee4</Data>
 <Data>btncopy.dll</Data>
 <Data>6.3.0.9000</Data>
 <Data>4f85fbda</Data>
 <Data>40000015</Data>
 <Data>000000000002e25e</Data>
 <Data>18bc</Data>
 <Data>01cf9215ab79ee98</Data>
 <Data>C:\Windows\explorer.exe</Data>
 <Data>C:\Program Files\WIDCOMM\Bluetooth Software\btncopy.dll</Data>
 <Data>9e5a534a-fe0c-11e3-90e5-fee5c7d69b69</Data>
</EventData>
</Event>

Any way to remove the prompt after Skype for Business patch?

So we rolled out the latest patches to our test machines and everyone got the new Skype for Business upgrade. When each person logged in they were greeted with a window that said something like:
"Your administrator is set for you to use the Lync User Interface."
We then had to click the Restart Now button which caused Lync to close and open up again and it looked like Lync instead of like Skype.
Is there any way to not have that pop up open and to just have everyone get the old Lync interface as if nothing happened? GPO, Registry, etc?
We want to minimize any confusion people are sure to have the first time they use it.
Thanks!

You can enable the SkypeUI (Set-CsClientPolicy -Identity Global -EnableSkypeUI $true) with the backend still being Lync Server 2013 to get the new client look and feeling.
The Skype for Business 2015 RTM Server bits should be out in May, but the current new functionality can be taken from:
https://technet.microsoft.com/en-us/library/dn933785.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.
Can I just enable it for individual users for testing? I tried doing a get-csclientpolicy and replacing -identity global with -identity <user ID> but it said it didn't exist since it seems it's looking for policies. Not sure if there's
some other way to do that.
Do I need to setup a new policy and just add certain people to it or is there any other way to do that for specific users?
Thanks!

Patch for HTMLB Handling of Internet Explorer 7

Hi,
My project is using Portal NW04s SP9. When I logon to Portal using Internet Explorer (IE 7), javascript error "_htmlMessageBar is undefined" came out and all the function links such as Help, Personalize, Logout are not function at all.
I read the SAP Note 990763 - HTMLB Handling of Internet Explorer 7, and glad to see that, this issue can be fixed by applying Patch 4 for NW04s SP9.
However, I am not able to get Patch 4 for NW04s SP9 in SAP Service Marketplace! I downloaded and deployed the Patch for PORTAL 7.00 SP09 (Patch Level 10 - which I think is the most relevent patch) to my Portal Server. Bad luck, same problem still exists.
Is there anyone has downloaded and applied the Patch 4 for NW04s SP9 before? Can you please tell me where can i get this patch?
Thanks a lot,
HauChee

Hi Nitin,
Thanks for your reply.
Finally, I found the correct patch file under SAP Support Portal -> Download -> SAP Support Packages -> Entry by Application Group -> Support Packages and Patches -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 2004S -> Entry by Component -> Enterprise Portal -> PORTAL FRAMEWORK 7.00 -> #OS independent -> Patch for PORTAL FRAMEWORK 7.00 SP09. Click on the info link, you can check out the patch info, and you will find out that, it included the HTMLB Supports IE7 in patch level 4.
Anyway, thank for your suggestion and I appreciate that.
Thanks,
HauChee

Business Explorer Error after installation of SAP GUI 7.10

Hi Experts
we have installed SAP GUI 7.10 successfully and there seems to be an error on Business Explorer.. while processing some of the queries in designer it gives out an error message " critical program error occured.The program has to close.Please refer to the trace for further information" this caused the entire application to close.
Trace : Error(08.11.07 15:19:10.965): mode completion failed, rc=-1 (error=6 UI ThreadHdl=1436)
please advise on this
thanks
lasitha

Hi ,
I have updated the GUI for the latest patch , that is 5. and still at sometimes when using query designer "critical Error" msg used to appear.. i have checked the logs but it doesnt give out any clue why this error occurs.. if ya have any suggestion please let me inform as well..
Thanks !

Patch for Business explorer

Similar Messages

Maybe you are looking for