Patch for debug in "log in " programs in solaris 8
Hi, I came across an article on a newspaper website about the above mentioned.If it is true,then kindly let me know the relevant patch for this.
Thanks in advance.
Ajay
It might be related to "Sunsolve.sun.com" "SunAlert"
Similar Messages
-
Is there a 10.1.3.3 patchset or patch for SOA suite10.1.3.1 on Solaris(×86-64)?
On this web http://www.oracle.com/technology/software/products/ias/htdocs/101310.html, I can find 10.1.3.3 patch for SOA suite10.1.3.1 on Microsoft Windows and Linux. But I don't if there is a 10.1.3.3 patchset or patch for SOA suite10.1.3.1 on Solaris(×86-64) on Metalink? What No.?
Thanks,
MelodyIf it is not availble via Metalink, then log a TAR to request this patch for your OS.
Marc -
Steps for debugging the ABAP program
Hi
Im a SAP-BW Consultant. I have a program in R/3-Side. I want to debugg that program.
Please give me the steps for debugging that program .
KumarHi Ravi,
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/d322540c3beb4ba53795784eebb680/content.htm
I give you some usefull Tips.
Type /h in command Bar.
Then press F8 then system will automatically goes to debugging mode.
Then press F5. Then it shows the Each and every line of your program.
or type break-point in your SE38 program. Then press F8. it will goes to the Debugging mode.
Thanks.
Reward If Helpful.
Message was edited by:
Viji -
Standard program for SCript delete logs
Hi experts
Can any one tell me the standardprogram for deleting script logs. i did some modifications for invoice script
but its not fetching the values thats why if delete ( reset ) script log then may be it'll work.
urgent.
Update me ASAP.
Thnak you .Hi,
i don't think there is some thing for this. just log off. and log in again .
why do you think because of logs you are not getting the data. check your program once again.
Regards
vijay -
How to find the patches for perticular concurrent program
HI
How to find the patches for perticular concurrent program. suppose for one concurrent program we create the patch and applied now i want know the which patch applied for perticular concurrent program through back end.
Thank'sQuery the concurrent program in Sysadmin responsibility.
Note the concurrent executable.
Query the concurrent executable in Sysadmin.
Note the file name.
If it is a package, open the package in TOAD and note down the file name.
If it is a report/form, open it in form developer and note down the file name.
Go to patch find screen in metalink. In the advanced search screen, enter the file name and you will see patches that contain it.
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026 -
Looking for automated log watching program
I am looking for a log watching program similar to Logwatch on Linux which can then be automated, for my Xserves. Does anyone know of such a product?
Thanks,
LisaJust pay attention that you should immediately upgrade Snort as the HenWen website says, "The bundled version of Snort will not run in Leopard due to a change in Leopard's iODBC library (and you shouldn't use it in Tiger, either, since it has a security hole)."
-
What is the extension for debug log file name?
Hi,
1) Please let me know what is the extension for debug log file....
is it .dbg or .log ?
in one of the sr the service engineer asked to put .log as the extension is this correct?
here is what he said...
a) Enable the following Profiles at user level:
OM: Debug Level = 5
INV: Debug Trace = YES
INV: Debug Level = 11
INV: Debug File = [directory value from above query]/logfilename.log
(make sure that you have write permission for this file and directory)
WSH: Debug Enabled - Yes
WSH: Debug Level - Statement
2) do the end-user (for whom trace is enabled) need to have read and write permissions on the directory and the log file?
Thanks
Rajuuser652672 wrote:
1) Please let me know what is the extension for debug log file....
is it .dbg or .log ?
INV: Debug File = [directory value from above query]/logfilename.log
(make sure that you have write permission for this file and directory) It is what you set in the value of "INV: Debug File" profile option (according to the above value, it will be logfilename.log).
2) do the end-user (for whom trace is enabled) need to have read and write permissions on the directory and the log file?No, just make sure the directory is writable by the oracle and applmgr users. -
Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7
There is an issue with the 64 bit Vista, Windows 7 and Windows 8 or 8.1 drivers that causes the spooler to crash with the following HP Deskjet printers:
Deskjet 710
Deskjet 712
Deskjet 720
Deskjet 722
Deskjet 810
Deskjet 812
Deskjet 820
Deskjet 822
Deskjet 1000
The attached file contains a patch for this issue for Vista and Windows 7.
[The patch does not currently work for Windows 8 or 8.1 x64 systems. There are some efforts to address this, if a solution is developed it will be posted here. {Edit - I have not made any progress in getting the patch to work in Windows 8 x64.}]
First make sure the driver for the printer is installed. If the driver has not been installed go to Start, Devices and Printers, Add a Printer, Local Printer, choose the proper port (for USB-Parallel converters the port will likely be USB001: or perhaps USB002: ), Next, click Windows Update then choose HP for the manufacturer and select the appropriate printer.
Apply the patch as follows: Log into the computer with an administrative account. Download the patch by clicking on this link or on the paper clip at the end of this post. Save the patch file to your computer, then unzip it. Next copy the three DLL files to the following directory: %windir%\system32\spool\drivers\x64\3
Note that %windir% is a system variable that points to the location of the Windows directory. For most systems this will be C:\Windows. You can click Start, Computer and type %windir%\system32\spool\drivers\x64\3 in the address bar and it will find the right place.
This can be done from a DOS prompt if DOS is opened with the "run as administrator" command, or from explorer with a copy and paste. Depending on your UAC settings you may need to provide confirmation. Also allow the current files to be overwritten if prompted.
This patch is not required and should not applied to a 32 bit version of Vista or Windows 7.
Thanks to extraordinary Microsoft engineer Alan Morris for guidance for the patch.
Update - the following are more detailed installation instructions:
Download the patch from here. Now click on the file and open it, then extract the patch to some directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative DOS prompt by clicking on Start, All Programs, Accessories, then right click on CMD.EXE and select Run as Administrator. Click in the DOS box then type the following:
MD c:\temp
CD \temp
Now extract the patch files into the c:\temp directory (extract all, chose c:\temp as the destination).
[Update - Windows security settings may prevent these files from being used, please open Computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties. If there is a message in Properties indicating the file was downloaded from the internet and may be blocked then unblock the file before proceeding.]
Next click back in the administrative DOS prompt and type the following: (stuff in green is comments, do not type them...)
DIR *.dll (this is just to verify the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others.)
Net stop spooler (makes sure the files are not in use.)
Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)
Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)
Copy hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000)
Net Start Spooler
Exit
[Edit - note that these DLL files will already be in the directory. You will get a warning asking if it is OK to overwrite the files, say "yes".]
At this point the patch is installed and ready to print.
Note that the printers here do not support USB connections, they have only parallel ports. [Edit - if your printer does have a parallel port use it, this will likely be much less problematic than using a USB-Parallel converter.] If you use a USB-parallel converter make sure it is supported in your operating system. The following posts are flagged with USB-parallel cables that are reported to work in Windows 7. A driver is required for the USB-parallel converter in addition to the driver for the printer. For supported converters this is typically supplied automatically in Windows 7. Note: the proper port to select for the USB-Parallel converters is often USB001:. I have heard of some cases where the port was USB002: or LPT3: as well. If the port you are using does not succeed (after applying the patch) try changing the port by going to Start, Devices and Printers, right click on your printer and select Printer Properties, then click on the Ports tab.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
This question was solved.
View Solution.
Attachments:
DJ_Patch.zip 34 KBJust want to send a thanks. Purchased a new HP computer with 64 bit Windows 7 and haven't been able to get my 722c to work. This patch worked like a charm!
-
Revision: 4610
Author: [email protected]
Date: 2009-01-21 12:48:01 -0800 (Wed, 21 Jan 2009)
Log Message:
Commit Josh's patch for 3.x to fix bug SDK-17367 which works around an issue with Dictionary that stops ObjectUtil.toString() working with QNames.
QE: Yes, please add a test case to ObjectUtil tests for this scenario.
Doc: No
Checkintests: Pass
Bugs:
SDK-17367 ObjectUtil.toString(QName) causes RTE
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17367
http://bugs.adobe.com/jira/browse/SDK-17367
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/utils/ObjectUtil.asVPN-User,
Ok - I see the list of issues and will ensure our X300 specialist takes a look at it.
Please do understand that while you have put together a very coherent list, I try to ensure priority to threads in which multiple customers are focused on a single issue, as we deliver the most benefit to the community in working on those. This forum is primarly a peer to peer discussion forum rather than a Lenovo chat / tech support where we try to solve each and every issue put forth.
Individuals with a long list of issues on a particular machine may find benefit from either contacting technical support and working through their list, or publishing it as you have done and wait for other users of the same system to share their experiences.
Thanks for your patience
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Jdeveloper patches for jsp?
Hi
Is there a patch for jdeveloper 3.0 that makes the debugging of JSPs possible? Right now the line numbers that are shown are way off.
Where can I find the patches on this site?
ORACLE - Isn't it possible that such a big e-business company could design the site so you don't need to ask where the patch pages are located ?
Regards
/JoachimJDeveloper 3.0 supports JSP (Java Server Pages ) Debugging. No need of any additional patches.
Right now the line numbers that are shown are way off.
(What exactly is the meaning of this , I am not clear, please explain).
In JDeveloper 3.1 it is possible to do the remote debugging of JSP's and Servlets running on another web servers.
One restriction is that
When debugging JSP's (either locally or remotely), any debugging feature which uses expression evaluation will not be available. This includes conditional breakpoints,
expression logging for breakpoint occurrence, and the Run->Evaluate/Modify dialog.
The above is mentined in the Release Notes for Oracle JDeveloper 3.1.
null -
I've installed my patch for zen 3.2 on a netware 4.11 server and for
some
reason my console prompt is gone. I can still get to the console
screen buy
alt and esc and see the screen but, this is no prompt. It's like going
to a
command prompt in windows but there is not command prompt. Does
anybody know
what wrong?
thanks
Pat LenahanHere it is!
"Jared L Jennings" <[email protected]> wrote in
message
news:[email protected]...
> Do you know what the last thing is that loaded?
> If you are able to login to the server, do you have a console log?
> sys:\etc\consol.log If so you might post the latter part of it.
> It will prompt you for each thing to be loaded, then you will know
> which is the last.
>
> On, a side note. ZFD 3.2 is not supported on 4.11, I believe it
works,
> but for sure don't be surprised if you get errors.
>
> --
> Jared L Jennings
> Novell Support Forums SysOp
> Using XanaNews 1.15.2.7
> Geek by nature, NetWare by choice.
Loading module NWSNUT.NLM
This module is ALREADY loaded and cannot be loaded more than once.
Loading module JAVA.NLM
Novell JVM Version 1.1.7B Build 01012614
Version 1.17 January 26, 2001
Copyright (c) 1998-2000 Novell, Inc.
Portions Copyright (c) 1998 Sun Microsystems
Debug symbol information for JAVA.NLM loaded
Loading module JAVA.NLM
This module is ALREADY loaded and cannot be loaded more than once.
Loading module DBSRV7.NLM
Sybase Adaptive Server Anywhere 7.0.0.505
Version 7.00 December 14, 2000
Copyright 1989-2000 Sybase, Inc. All rights reserved. All
unpublished
rights
reserved.
Auto-loading module MATHLIB.NLM
NetWare Math Library Auto-Load Stub
Version 4.21 March 31, 2000
Copyright (c) 2000 Novell, Inc. All rights reserved.
Loading module DDCLIENT.NLM
NetWare 4.1 Direct Directory Client
Version 6.56 February 10, 1998
Copyright 1993-1997 Novell, Inc. All rights reserved. Patents
Pending.
Portions (C) Copyright 1986-1990 RSA Data Security, Inc.
Loading module IMGSERV4.NLM
ZENworks Imaging Proxy Server (NetWare 4)
Version 3.01 July 12, 2001
(C) Copyright Novell Inc.
Auto-loading module NETDB.NLM
NETWORK DATABASE ACCESS NLM
Version 4.10a August 14, 2000
(C) Copyright 1998, Novell, Inc. All rights reserved
NDS Context: O=anlin
NetDB Library loaded successfully.
Auto-loading module ZENIMGDS.NLM
ZENworks Imaging DS Library
Version 3.22b March 20, 2003
Copyright (c) 2000, 2001, 2002, 2003, Novell, Inc.
Debug symbol information for ZENIMGDS.NLM loaded
Search 6: [Server Path] SYS:MCAFEE\NETSHLD\
Loading module NETSHLD.NLM
McAfee NetShield for NetWare
Version 4.60 December 17, 2001
Copyright (c) 1995-2001 Networks Associates Technology, Inc. All
Rights
Reserv
ed.
Auto-loading module NAIREG.NLM
McAfee NetShield for NetWare
Version 4.60 December 17, 2001
Copyright (c) 1995-2001 Networks Associates Technology, Inc. All
Rights
Reserv
ed.
Auto-loading module MCSCAN32.NLM
Network Associates Anti-Virus Engine
Version 42.40 February 24, 2003
Copyright (c) 2003 Networks Associates Technology,Inc. All Rights
Reserved.
Loading module DSBACKER.NLM
NetWare 4.11 Directory Services Install
Version 5.50 September 30, 1998
Copyright 1993-1996 Novell, Inc. All rights reserved. Patents
Pending.
Symantec Java! JustInTime Compiler Version 3.10.110(x) for JDK 1.1.x
Copyright (C) 1996-99 Symantec Corporation
Symantec Java! JustInTime Compiler Version 3.10.110(x) for JDK 1.1.x
Copyright (C) 1996-99 Symantec Corporation
java.lang.NoClassDefFoundError: org/omg/CORBA/ORB
Loading module PFTDLBS.NLM.naming.NamingServer.main(Compiled
Code)
Java Class Libraries for NetWare - 4.x Loader Aide
Version 1.10 July 12, 2000
Copyright 1997-1999 Novell, Inc. All Rights Reserved.
6-20-03 1:33:20 pm: RSPX-4.12-28
Remote console connection granted for 00000001:0007E9F4791A
6-20-03 1:41:10 pm: RSPX-4.12-23
Remote console connection cleared for 00000001:0007E9F4791A
6-21-03 12:38:03 am: SERVER-4.11-930
User ANDY at station 55 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:08:18 am: SERVER-4.11-930
User SHIPPING at station 11 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:08:18 am: SERVER-4.11-930
User MANUEL at station 20 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:08:18 am: SERVER-4.11-930
User GEORGE at station 21 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:08:18 am: SERVER-4.11-930
User PAM at station 71 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:08:18 am: SERVER-4.11-930
User RICHARD at station 134 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 1:38:34 am: SERVER-4.11-930
User ANNA at station 116 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-21-03 5:14:35 pm: RSPX-4.12-28
Remote console connection granted for 00000001:0007E9F4791A
6-21-03 5:15:40 pm: RSPX-4.12-23
Remote console connection cleared for 00000001:0007E9F4791A
6-22-03 12:38:11 am: SERVER-4.11-930
User ANDY at station 18 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-22-03 1:08:27 am: SERVER-4.11-930
User MANUEL at station 2 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-22-03 1:08:27 am: SERVER-4.11-930
User RICHARD at station 14 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-22-03 1:08:27 am: SERVER-4.11-930
User SHIPPING at station 20 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-22-03 1:08:27 am: SERVER-4.11-930
User GEORGE at station 24 connection terminated
User did not log out within 5 minutes after security watchdog
notice
Loading module DSBACKER.NLM
NetWare 4.11 Directory Services Install
Version 5.50 September 30, 1998
Copyright 1993-1996 Novell, Inc. All rights reserved. Patents
Pending.
Module DSBACKER.NLM unloaded
6-23-03 1:07:33 am: SERVER-4.11-930
User SHIPPING at station 14 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-23-03 1:07:33 am: SERVER-4.11-930
User GEORGE at station 17 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-23-03 1:07:33 am: SERVER-4.11-930
User BOBBY at station 18 connection terminated
User did not log out within 5 minutes after security watchdog
notice
6-23-03 9:13:30 am: RSPX-4.12-28
Remote console connection granted for 00000001:00065B9E477E
6-23-03 9:13:55 am: RSPX-4.12-23
Remote console connection cleared for 00000001:00065B9E477E
6-23-03 10:49:04 am: RSPX-4.12-28
Remote console connection granted for 00000001:0007E9F4791A
6-23-03 10:49:39 am: RSPX-4.12-23
Remote console connection cleared for 00000001:0007E9F4791A -
Hi folks at Oracle,
please consider accepting this patch for the Windows Perl module build script into your distribution of Berkeley DB XML:
--- build.bat.orig 2009-12-22 14:17:00.000000000 +0100
+++ build.bat 2010-03-01 02:38:26.859375000 +0100
@@ -6,46 +6,54 @@
:: "noinstall" installation is not done
-call :TryBat "c:\Program Files\Microsoft Visual Studio .NET 2003\Common7\Tools\vsvars32.bat" && goto BATFOUND1
+:: Avoid hard-coded paths like "C:\Program Files\Microsoft ...".
+:: In another locale, the path is different: "C:\Programme\Microsoft ...".
+:: Use the appropriate environment variables instead.
+:: There is %ProgramFiles% for the program folder.
+:: There are dedicated variables for Visual Studio.
+:: These are by far the best bets here.
-call :TryBat "c:\Program Files\Microsoft Visual Studio .NET\Common7\Tools\vsvars32.bat" && goto BATFOUND2
+call :TryBat "%VS90COMNTOOLS%\vsvars32.bat" && goto VS90
-call :TryBat "c:\Program Files\Microsoft Visual Studio.NET\Common7\Tools\vsvars32.bat" && goto BATFOUND3
+call :TryBat "%VS80COMNTOOLS%\vsvars32.bat" && goto VS80
-call :TryBat "c:\Program Files\Microsoft Visual Studio 8\Common7\Tools\vsvars32.bat" && goto BATFOUND4
+call :TryBat "%VS70COMNTOOLS%\vsvars32.bat" && goto VS70
goto BATNOTFOUND
-:BATFOUND1
-echo Using Visual Studio .NET 2003
+:VS90
+echo Using Visual Studio 2008, VS9
goto BATFOUND
-:BATFOUND2
-echo Using Visual Studio .NET
-echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
+:VS80
+echo Using Visual Studio 2005, VS8
goto BATFOUND
-:BATFOUND3
-echo Using Visual Studio.NET
-echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
-goto BATFOUND
-:BATFOUND4
-echo Using Visual Studio 2005
-echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
+:VS70
+echo Using Visual Studio 2003, VS7
goto BATFOUND
:BATFOUND
+echo *********** CHECK: Make sure the binaries are built with the same system libraries that are shipped.
:: Use the correct line, depending on whether you are building
:: release or debug
:: perl Makefile.PL -config config.win32d >> winbld.out
:: perl Makefile.PL prefix=../../../perl -config config.win32 >> winbld.out
-perl Makefile.PL -config config.win32 >> winbld.out
+
+IF EXIST ..\..\..\bin\debug\libdbxml25d.dll (
+ perl Makefile.PL -config config.win32d >> winbld.out
+) ELSE (
+ perl Makefile.PL -config config.win32 >> winbld.out
+)
+
nmake >> winbld.out
nmake ppd >> winbld.out
if /I [%1] NEQ [noinstall] (
+ echo installing modules, info in logfile winbld.out
nmake install >> winbld.out
+) else (
+ echo not installing modules as requested
goto ENDIt'll make installation success more likely for international users, and also for English users. Also, at the end of the process, the user is informed where he can go looking for what the installation process has been doing. Plus, the script tries to figure out on its own whether to use the debug config or the straight config.
The build has been successful for as much as I can say now:
:: perl -MSleepycat::DbXml -lwe "print $Sleepycat::DbXml::VERSION"
2.0050016
:: perl -MSleepycat::DbXml -lwe "print $Sleepycat::Db::VERSION"
4.008026Michael LudwigHi Michael,
Thanks for the patch! We'll take a look at that and try to improve the Perl installation in the next release.
John -
Adobe Photoshop CS6 provides no engine for debugging
Hello,
I've been trying to diagnose a problem with my wife's copy of CS6 Web and Design premium. Basically it's unable to run any JSX script that requires the Debug engine. I receive the error message 'Adobe Photoshop CS6 provides no engine for debugging' - trying it on Illustrator also gives a similar error. Persisting by clicking the 'play' button brings up a popup error message that says 'Unable to Run Script' or something similar.
Note that if I hack our JSX script to bypass the debug engine it works fine - except certain PSDs will cause CS6 (and my older copy of CS4) to crash, so this is only a stopgap measure. Disabling OpenGL on CS4 seems to prevent crashing but it's not an option on the wife's copy since she's a full-time artist and I'm not.
This is what I've had to change -
$.level = 2; // debug level: 0-2 (0:disable, 1:break on error, 2:break at beginning)
debugger; // launch debugger on next line
Changing the $.level = 0 lets me continue without issue.
This problem does NOT exist on my laptop using the same installer downloaded from Adobe.com. (I use trial version for testing, she uses her serial no.)
Is it possible this problem persists because I uninstalled an old copy of Photoshop CS5 (standalone installation) AFTER installing CS6 Web & Design (multiple programs)?
I've tried uninstalling and reinstalling CS6, but the problem persists.
Please help, our jobs rely on this. >.<
Worst case scenario I'll copy the entire install folder over from my laptop to try and fix the problem but I'd rather not have to since we're currently working in different countries and I can only use Remote Assistance to help.The problem is the SCRIPTS work - the debugging engine is what's missing for some reason. Even if there's a way to just cleanly uninstall everything so I can start from scratch without formatting the hard disk would be a good solution. (since apparently I think I missed some files somewhere on the last uninstall)
-
AAC/MPEG-4 support patch for abcde
I got bored to day and made up this patch for abcde that adds support for AAC using the M4A extension.
It uses FAAC as the encoder and also patches abcde to version 2.2.3
I have not tested it yet so bear with me...i'll post my test results later.
You'll have to manually add the "M4AENCOPTS=" variable to the config
usage is: abcde -o m4a
UPDATED: fixed a plethora of typos
another side note is the fact FAAC must be compiled with mpeg-4 support, the Archlinux package for FAAC isn't, so therefore this could be a problem unless you compile FAAC yourself. I submitted a feature request to get mp4 support added.
the following is the 2.2.0 to 2.2.3 update+AAC patch. I will submit a AAC patch for the newest release to the developers of abcde later on.
--- abcde-old-2.2.0 2005-03-08 12:42:14.000000000 -0500
+++ abcde2 2005-03-08 12:11:07.000000000 -0500
@@ -11,7 +11,7 @@
# Copyright for this work is to expire January 1, 2010, after which it
# shall be public domain.
-VERSION="2.2.0"
+VERSION="2.2.3"
usage ()
@@ -21,7 +21,7 @@
echo "-1 Encode the whole CD in a single file"
echo "-a <action1[,action2]...>"
echo " Actions to perform (cddb,read,normalize,encode,tag,move,playlist,clean)"
-echo "-A Experimental actions (retag, transcode)"
+#echo "-A Experimental actions (retag, transcode)"
echo "-b Batch mode: enable album normalization and nogap encoding"
echo "-c <file>"
echo " Specify a configuration file (overrides system and user config files)"
@@ -366,6 +366,9 @@
mpc)
run_command tagtrack-$1 true
+ m4a)
+ run_command tagtrack-$1 true
+ ;;
esac
done
@@ -489,6 +492,10 @@
## FIXME ## to the encoder ends up empty.
run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
+ m4a)
+ # AAC/MPEG-4 format (.m4a) is done locally, with inline tagging.
+ run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $M4AENCODER $M4AENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -w "$IN" -o "$OUT"
+ ;;
esac
done
# Only remove .wav if the encoding succeeded
@@ -737,6 +744,9 @@
if [ "$INTERACTIVE" = "y" ]; then
while [ "$DONE" != "y" ]; do
read ERASEPLAYLIST
+ if [ "$ERASEPLAYLIST" = "" ]; then
+ ERASEPLAYLIST=e
+ fi
case $ERASEPLAYLIST in
e|E|a|A|k|K) DONE=y ;;
@@ -764,7 +774,7 @@
ARTISTFILE=$(mungefilename "$TRACKARTIST")
# If we want to start the tracks with a given number, we need to modify the
# TRACKNUM value before evaluation
- if [ -n $STARTTRACKNUMBER ] ; then
+ if [ -n "$STARTTRACKNUMBER" ] ; then
# Get the trackpadding from the current track
CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - 1 ))
@@ -843,7 +853,7 @@
cdparanoia|debug)
if [ "$WEHAVEACD" = "y" ]; then
vecho "Querying the CD for audio tracks..."
- TRACKS=$( $CDROMREADER -Q 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
+ TRACKS=$( $CDROMREADER -d $CDROM -Q --verbose 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
CDPARANOIAAUDIOTRACKS="$TRACKS"
else
if [ -f "$ABCDETEMPDIR/status" ] && checkstatus cdparanoia-audio-tracks ; then
@@ -1354,7 +1364,7 @@
EDITCDDB=n
fi
if [ "$EDITCDDB" = "y" ]; then
- CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
+ CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d" " -f1);
# Use the debian sensible-editor wrapper to pick the editor that the
# user has requested via their $EDITOR environment variable
@@ -1387,7 +1397,7 @@
# Some heuristics first. Look at Disc Title, and if it starts with
# "Various", then we'll assume Various Artists
- if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2 -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
+ if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
echo "Looks like a Multi-Artist CD" >&2
VARIOUSARTISTS=y
else
@@ -1470,7 +1480,7 @@
echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
- if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d " " -f 1) ]; then
+ if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d" " -f1) ]; then
# This works but does not have the necessary error checking
# yet. If you are familiar with the CDDB spec
# (see http://www.freedb.org/src/latest/DBFORMAT)
@@ -1577,7 +1587,7 @@
WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
OUTDATA="$ABCDETEMPDIR/track$UTRACKNUM.$OUTPUTTYPE"
if [ -r "$CDDBDATA" ]; then
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d [:cntrl:])
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d [:cntrl:])
echo "Grabbing track $UTRACKNUM: $TRACKNAME..." >&2
else
echo "Grabbing track $UTRACKNUM..." >&2
@@ -1692,6 +1702,7 @@
SPEEXENCODERSYNTAX=default
MPPENCODERSYNTAX=default
NORMALIZERSYNTAX=default
+M4AENCODERSYNTAX=default
OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
# Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
@@ -1738,6 +1749,7 @@
SPEEXENC=speexenc
# mpp (Musepack)
MPPENC=mppenc
+M4AENC=faac
ID3=id3
ID3V2=id3v2
@@ -1773,6 +1785,7 @@
SPEEXENCOPTS=
# mpc
MPPENCOPTS=
+M4AENCOPTS=
ID3OPTS=
ID3V2OPTS=
@@ -2039,6 +2052,7 @@
spx) [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc ;;
mpc) [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc ;;
+ m4a) [ "$M4AENCODERSYNTAX" = "default" ] && M4AENCODERSYNTAX=faac ;;
*) echo "abcde error: Invalid OUTPUTTYPE defined" >&2
exit 1
@@ -2100,6 +2114,12 @@
MPPENCODER="$MPPENC"
esac
+case "$M4AENCODERSYNTAX" in
+ faac)
+ M4AENCODEROPTS="$M4AENCOPTS"
+ M4AENCODER="$M4AENC"
+ ;;
+esac
# and which tagger
@@ -2144,7 +2164,7 @@
${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC}
${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT}
${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED}
- ${NEEDVORBISGAIN+$VORBISGAIN}
+ ${NEEDVORBISGAIN+$VORBISGAIN} $M4AENCODER
do
# Cut off the command-line options we just added in
X=$(echo $X | cut -d' ' -f2)
@@ -2207,37 +2227,6 @@
esac
fi
-if [ "$STRIPDATATRACKS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
- case "$CDROMREADERSYNTAX" in
- cdparanoia|debug)
- # cdparanoia can query the CD, so let's process the TRACKQUEUE list with the results.
- if checkstatus cdparanoia-audio-tracks; then
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-audio-tracks )
- else
- ## FIXME ##
- vecho "Querying the CD to obtain a list of valid audio tracks..."
- $CDROMREADER -Q > $ABCDETEMPDIR/cdparanoia-query 2>&1
- # Obtain a list of valid audio tracks from the results of the query
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-query | egrep '^[[:space:]]+[[:digit:]]' | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
- fi
- # Obtain the track padding value from the before-processing list and pad the CD list
- TRACKNUMPADDING=$( echo $TRACKQUEUE | awk '{print $1}' | tr -d " n" | wc -c )
- for TRACK in $CDTRACKQUEUE ; do
- TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
- PADNEWTRACKQUEUE=$(echo $PADNEWTRACKQUEUE $TRACKNUM)
- done
- CDTRACKQUEUE=$PADNEWTRACKQUEUE
- # Now, compare if the values in the list are valid tracks in the CD
- for TRACK in $TRACKQUEUE; do
- if echo $CDTRACKQUEUE | grep $TRACK >/dev/null ; then
- NEWTRACKQUEUE="$NEWTRACKQUEUE $TRACK"
- fi
- done
- TRACKQUEUE="$NEWTRACKQUEUE"
- esac
-fi
# Create playlist if needed (backgroundable) and start reading in tracks
@@ -2446,7 +2435,7 @@
# TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${UTRACKNUM} + 0))
TRACKNUM=$UTRACKNUM
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2 -d= | tr -d [:cntrl:] | sed 's/ +$//')
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d [:cntrl:] | sed 's/ +$//')
splitvarious
fi
fi
the patches can also be found here http://www2.rudefyet.com:8080/patch
please post any other issues you havenot yet, i'm going to work all the kinks out before i submit it
as of right now I noticed some major typos, on my part, that cause it to fail...i'm working on that right now -
Hi mates,
ive decide to make a patch for modbin6 1.00.38 to improve stability and minise risk of modding the BIOS. for users which is reading this post if never heard about MODBIN better avoid reading below. its nice program for basic BIOS mod, simple to use, but very danger in the same time couse mess with BIOS and inproperty using may couse disaster. im not gona advert or to invite persons to use it. just wana make this program to be used normally to bring stability and minise risk of making corrupted BIOSes.. for persons which is already using it and have experience with him or with person Enthu which is wana try it and they dont worry if mobo may caouse for trash. there is 2 reasons to making this patch.
1. couse sometimes im using it there is features on it wchich gives basic stuffs, unlocking hidden features locked by manifacturer(sometimes really usefull especially for DIMM Vcore..). so there is a nasty bug on it which gona explain later. most of persons who is using MODBIN know about it. so that patch will spend me alot of time and minimise risk of mistake during avoiding bug couse operation need several procedure and automatised will risk free and much fastern.
2. to bring ability for most stable operations to persons which is already using it when need.
but lets talk about the patch. everyone know that nasty issue with MODBIN(made it by Borg N1,part from his collection). bug is program wont safe BIOS file and quiting with Abnormal program termination.... gives this one message: !!!File
2MBIOS.BIN can't open!Thanks for using ModBin6 1.00.38 how nice ...
here is Borg N1 advices:
Quote from: Borg Number One on 16-July-05, 05:24:51
Hi.
It is a kind of sad fact that many users just know how to use the mouse and keyboard.
Well, you have to configure your config.sys (Win9x/ME) or config.nt to run MODBIN6
(e.g. MODBIN6 2.01.01 (06/25))
in Windows prompt/console without problems.
The " FILES " & " BUFFERS " values are the important values.
http://www.xtremesystems.org/forums/showthread.php?t=45538
http://www.xtremesystems.org/forums/showthread.php?t=63210&highlight=config.nt
+++ BNOBTC & BNOBLG +++
http://bnobtc.pix-art.com
Borg advices is good but unfortuanly doesnt fix that bug... seems author dont have much idea why this is happend...error is constant ... Pure DOS also can't help... i wana add few more tips to the Borg's ones to improve stability when using modbin, after that will talking about patch.
TIP: navigate to this folder and open config.nt file: %SystemRoot%\system32\config.nt
at the end of file add this ones:
dos=high, umb
device=%SystemRoot%\system32\himem.sys /CPUCLOCK:ON /HMAMIN=64
FILES=40
BUFFERS=40
STACKS=9,256 -----> Preserving 039A-045Eh 3,152 Sys 039Ah Stacks, 0552h DOSX
Also MODBIN doesnt work well with long filenames.... etc "document and settings\my profile\desktp\modblabla" if not gona work property and there is a big chance of failure will load but after saving will have problems to update BIOS "core"(original.tmp) so always use 8.3 syntax standart .... best way from root directory make subdir whcih name to no NOT exceed 8 symbols... etc C:\123,C:\MYFLASH,C:\ROFL
without TIPs it is really big gamble with BIOS....
Aslo that will prevent Stack Overflow error when BIOS is loading....
NOTE: To activate changes just quit from any DOS interpretators like(4nt,command.com,cmd and so on). and re-run it. Reboot OS is not requred.
here how to do:
Also when executing MODBIN put below executable file this ones without quotes "loadfix forcedos modbin6-1.00.38.exe"
and ofcourse nasty error is waiting us... "2MBIOS.BIN can't open!Thanks for using ModBin6 1.00.38"
Patch which iv maked gona RIP this error forever.
Download: modbin6_1.00.38
Download: MODBINPATCH
What patch need? and how to use it? I named patch "Dynamic Patch for modbin" Couse isnt make modification on MODBIN program but momory his parent process when is loaded into memory.
tips suggested below is recommended but not nesecery for the patch.. patch need MODBIN and your BIOS file (modbin6-1.00.38.exe and mybios.bin) to be copied to systemroot drive(usually C) in folder MSI etc put modbin6-1.00.38.exe and mybios.bin(BIOS which you gona mod) to C:\MSI
Patch make checking if folder doesnt match will not continue....
How to use it..... Copy modbin6-1.00.38.exe and mybios.bin to C:\MSI, then from command prompt navigate to C:\MSI and execute "loadfix forcedos modbin6-1.00.38.exe" after that load your BIOS file... when loading is complete navigate to your patch folder and execute patchMSI.exe.... takes 10 seconds to complete after that make active "white" window and enter "Q" then hit ENTER key both windows will be closed, after that return to your modbin window, make what you gona make and save BIOS file like normal procedure... Method is founded and tested by me from years below never let me down(never brings corrupted BIOS), but just today ive made patch couse was too lazy... also Borg's MODBIN can work with most of all chipsets which is using AWARD Modular based... NOTE: K9 isnt tested. the most of here you can view how exacly to do it and differents with and without patch:
here is one more think some time maybe usefull from me:D
Here is 1st little short trick:(no analog anywhere, like patch only here can be found if accepted):
How to reset BIOS if you have nothink? Examples if you are administrator/PC-support or any and must fix same PC but the BIOS has an password?! And you dont have permision to open Case to reset CMOS(couse PC has an sticker with Warantly (and removing that sticker couse lost pc warrantly) You need access to BIOS to re-check,configure somethink there but its password protected. anyway there could be many situation. what we need? nothink special just bootable DOS(or analog- PC-DOS or whatever,doesnt matter where will boot(cd,flash disk,hdd)), no extended commands.[io.sys(jo.sys),command.com] - files requred to boot Here we go:
boot from desired device.when you see command prompt etc.: "A:\,C:\"
We will write a program without any languich..directly in PC code..(without compilator), direct in machine code.
write this:
copy con ffs.com|ffs *comment None
176.230p144144230q195 *comment Hold "ALT" and write number
^Z *comment "CTRL+Z" then hit "Enter"
Explain:
copy(internal command)
con (command line switch)
^Z (CTRL+Z)
NOTE: Numbers in second line must be written with holdon "ALT" key and specified numbers.(ASCI Code). Non numbers symbols is normal keyboard selection. on input display should look like:
copy con ffs.com|ffs
░.цpРРцq├
^Z
Program is 9 bytes long... (simple but high effective)
Thats it.Reboot Computer... password is gone. CMOS is reseted to default values. Tested on Award 4.0,6.0, AMI BIOS. Break all..
and finaly again:
**To All readers of this thread: Please note that this thread is with regards to Self-Modding BIOS and are of NO Official Testings from MSI. MSI will not be responsible for ANY Damage caused from requesting these self modded BIOSes! Please mind that you'll ONLY request and flash AT YOUR OWN RISK!!!** also MODBIN Author(Borg N1) and me is dont are NOT responsible for ANY Damage caused by MODBIN or Add On Patch. (i didnt think there is risk exit must must said that warning....couse playing with BIOS is always risky). Happy Tweaking.Well, I was wondering if the system not allowing the tty to change ownership -- but root also has the problem.
You might try checking which shell is set for your users in /etc/passwd, and then check that the shell really exists at the specified path, and that it is executable. You might also check that the home directory for you users (also specified in /etc/passwd) is mounted and your user has the appropriate rights to that directory.
Other than that, I am running out of altitude, airspeed and ideas all at the same time. There was one thing in your trace I did not understand. Why is your system looking to the floppy drive? I wonder if that is contributing to the problem.
Maybe you are looking for
-
Weird: Signed in = no post, not signed in = post is there
I just posted my reply to this discussion using Firefox on my PC: https://discussions.apple.com/message/23203419#5383748 When I'm signed in, I cannot see my post, but when I'm signed out, I can see my post! This is happening on my PC in Firefox and a
-
How to activate fields under origin tab in the asset master data
Hello Gururs, While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new. 2.) Purchase used. I want to check one of these two check boxes.
-
Lens Model label not showing up in Lightroom 5: Pentax HD DA 55-300mm f/4-5.8 ED WR
How can I get this resolved? Thanks!
-
IMac to PC video chats - Yahoo or MSN?
Has anyone successfully used either Yahoo or MSN instant messaging for video chats, iMac to PC? If so, what are the specifics for making it work? Thanks for any help you can provide. NJZ
-
Please forgive me but I'm 49 years old and don't know much about the internet regarding uploads. My basic question is...how come some websites can sustain high quality videos that can be over 5 minutes long? Is it a memory issue? I use iweb for my we