Patch for DST for Enterprise manager Grid on windows.

Hi
All
What is the patch I need to apply for DST for oracle enterprise manager grid control?
plateform: windows server 2003
database: 10.2.0.2
let me know If you need more information.
Thanks,
Vishal

Metalink:
Subject: Enterprise Manager DST Quick Fix Guide
Doc ID: Note:418792.1

Similar Messages

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

Enterprise manager Grid Control for Windows 64 bit

Hi,
I am looking for Enterprise Manager Grid Control 10.2.0.3 for Microsoft Windows Server 2003 R2 64 bit. On OTN and metalink I can only find for 32 bit. Can anyone suggest where I can find the same.
Thanks in Advance.
SK.

The OMS is on Win x86 and supports Agent on Win x64 target.

Deploy agents for Oracle Enterprise Manager Grid 11.1.0.1.0

Hi All,
I have successfully installed Oracle Enterprise Manager Grid 11.1.0.1.0 on Red Hat 5.5 64 bit. It is up and running.
I have started preparing for deployment of the agents. There are quite a lot targets which are Windows machines.
My question is what is the best approach for deploying agent on server running Microsoft Windows? Is it Installing Oracle Management Agent Using Agent Deployment Wizard or silent.
I started with Agent Deployment Wizard but for Windows it requires setting SSH and installing cygwin which is not very comfortable if I have to do this for all Windows targets. If it is the case , should cygwin and ssh daemon be running all the time or just for the phase of installing the agent?
Please advise which is the best approach in this case when most of the targets are running on Microsoft Windows.
Any ideas are appreciated.
Thanks,
Maria
Edited by: 832920 on Feb 1, 2011 5:31 AM
Edited by: 832920 on Feb 1, 2011 5:45 AM

Hi,
I have used the method "agent install in silent mode" and believe that this is a rather simple way to install an agent. You just have to test it
on one host - and if it works there it will work any other hoste as well - you could use the same response file for all other hosts. The command
to install the agent remains the same...
But maybe someone else beliefs that another approach might be better...

Database respository for Enterprise Manager Grid 10.2.0.2.0

Does anyone know if enterprise manager grid 10.2.0.2.0 repository database is able to be run on a 10.2.0.2.0 database.
The documentation states that it is certified to run on 10.1.0.4.0 or higher database, but I think this means only 10.1.x database not 10.2
I have checked the certification page, and it only indicates the 10.2.0.1.0 release of the software is able to run on 10.1.0.4.0, the mention of 10.2 database is planned.

Suggest you recheck the certification page, and click on the link Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.2).
That will tell you 10.2.0.2 database is certified for a 10.2.0.2 grid control
10.2.0.1 IS NOT CERTIFIED!!!!
Cheers,
Bazza

Apply CPU /PSU patches through Enterprise Manager Grid Control.

How to apply PSU patches from 10.2.0.5 GRID Grid Control to my test/development/qa environment.
Are there any step by step documents availible. Did any one applied these patches using Oracle Enterprise Manager Grid control.

Please read
Oracle® Enterprise Manager Administrator's Guide for Software and Server Provisioning and Patching
10g Release 5 (10.2.0.5.0)
3 Infrastructure Requirements
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e14500/infrastructure_setup.htm#BABEIFBC
For the correct setup to do you patching.
Regards
Rob
http://oemgc.wordpress.com

Install Enterprise Manager Grid Control 11R1 Failed at OMS Configuration

Hello:
I have installed Oracle 11g (11.2.0.1) and WebLogic Server (WLS) 10.3.6.0 and currently I am in the process of installing Enterprise Manager Grid Control 11R1 on a Linux RedHat 5.8 and it fails at OMS Configuration.
I have read the following thread and they suggested to use WLS 10.3.2:
Trouble installing EM GC -- installer patch 9329357 fails
I was looking for WLS 10.3.2 in Oracle's website and I could not find it.
Any help would be greatly appreciated.
Here is the log regarding the error:
The patch has more than one Archive Action but there is no Make Action.
ApplySession applying interim patch '9367763' to OH '/dbs0/product/fmw/oms11g'
Running prerequisite checks...
You selected -local option, hence OPatch will patch the local system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
(Oracle Home = '/dbs0/product/fmw/oms11g')
Is the local system ready for patching? y
Y (auto-answered by -silent)
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '9367763' for restore. This might take a while...
Backing up files affected by the patch '9367763' for rollback. This might take a while...
Patching component oracle.ldap.rsf, 11.1.1.2.0...
Updating archive file "/dbs0/product/fmw/oms11g/lib/libldapclnt11.a" with "lib/libldapclnt11.a/gslu.o"
ApplySession adding interim patch '9367763' to inventory
Verifying the update...
Inventory check OK: Patch ID 9367763 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 9367763 are present in Oracle Home.
Execution of 'sh /dbs0/product/fmw/oms11g/install/oneoffs/111010/9367763/custom/scripts/post -apply 9367763 ':
Return Code = 0
The local system has been patched and can be restarted.
OPatch succeeded.
This config tool has failed. Please re-run this config tool manually from another terminal as
<ORACLE_HOME>/perl/bin/perl <ORACLE_HOME>/install/oneoffs/apply_NewOneoffs.pl <ORACLE_HOME> <oneoff_numbers>
Eg: /scratch/EM/agent10g/perl/bin/perl /scratch/EM/agent10g/install/oneoffs/apply_NewOneoffs.pl /scratch/EM/agent10g 5632264,5961654
Finished one-offs apply...
Deleting the files...
Finished deleting the above files...
Configuration assistant "OMS Oneoff Patch Application" Succeeded
Running Configuration assistant "Repository Configuration"
Calling the EMSCHEMA MANAGER: CREATE
Please check the Repository Configuration Assistant logs at: /dbs0/product/fmw/oms11g/sysman/log/schemamanager
The create is completed now running the MOS
Configuration assistant "Repository Configuration" Succeeded
Running Configuration assistant "MDS Schema Configuration"
Configuration assistant "MDS Schema Configuration" Succeeded
Running Configuration assistant "OCM EM Repository Instrumentation"
Configuration assistant "OCM EM Repository Instrumentation" Succeeded
Running Configuration assistant "OMS Configuration"
Executing the OMSCA command...
Check the OMS Configuration Assistant logs at: /dbs0/product/fmw/oms11g/cfgtoollogs/omsca
INFO: Required tool's Execution failed
Configuration assistant "OMS Configuration" Failed
INFO: ***Configuration Assistants Action END ***
*** The installation was Successful, but some configuration assistants were failed or cancelled or skipped. ***

Hello:
For some reason after selecting the Retry button it successfully passed the Add-on OMS Side Configuration. Now I am failing at the "Agent Configuration Assistant". Here's the agent log:
log4j:ERROR No appenders could be found for category (oracle.sysman.emas.sdk.discovery.discover.WeblogicTargetDiscovery).
log4j:ERROR Please initialize the log4j system properly.
Total Discovery time is :1675milliseconds.
INFO: oracle.sysman.top.agent:AddingToTargetsXml: WLS targets
INFO: oracle.sysman.top.agent:Adding /oracle/product/agent11g/sysman/install//oraclewls.out file to /oracle/product/agent11g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file= /oracle/product/agent11g/sysman/install//oraclewls.out to /oracle/product/agent11g successfully.
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Starting Agent with startAgent=true
INFO: oracle.sysman.top.agent:Starting the agent
INFO: oracle.sysman.top.agent:Starting the agent...
INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/agent11g/bin/emctl start agent
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2010 Oracle Corporation. Allrights reserved.
INFO: oracle.sysman.top.agent:Agent is already running
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.agent:11.1.0.1.0:common:family=CFM:oh=/oracle/product/agent11g:label=10} failed with an unhandled exception:
java.lang.Exception:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:269)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:243)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:540)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:120)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
Any help would be greatly appreciated.
Thanks,
Orivares

Unable to set up a Patching Setup section in Enterprise manager 11

Hi folks,
I have a problem with setting up a "Patching Setup" section in Enterprise manager. The problem is with a metalink login details. Is it the same as login details to support.orracle.com based on CSI number?
I have CSI number, I'm registered in support.oracle.com but don't have a metalink details. How can I get them, or how to set up that section correctly?
Many thanks,
Tomas

Yes, the credentials for OEM for the patch download section are the same as for MOS (support.oracle.com)
HTH
Srini

11.1.0.1.0 Enterprise Manager Grid Control - Single Sign-on certification

Greetings all,
What are the single sign-on solutions that work with 11.1.0.1.0 enterprise manager grid control?
thanks
Seetharaman

That shouldn't happen normally. Check again the installation guide that you meet all requirements for the repository database. Make sure there's no 'old' SYSMAN user (from standalone database control etc.).
Werner

Can Enterprise Manager Grid Control 10g R4 manages Oracle DB 11g?

Are there some articles or documents for that?

I assume you are asking whether it is possible to run Enterprise Manager Grid Control without using the embedded database. The answer is yes. There is a step in the install wizard that ask you whether you want to create an embedded database, or use an existing database environment. Just follow the instructions on the wizard to point your EM server to the database of your choice. You can even run EM on RAC provided that you already have the license for it.

Install Enterprise Manager Grid Control 10.2.0

Hi,
to install Oracle Enterprise Manager Grid Control 10.2.0. should I
1-install 10g Release 1 (10.1)
2-Apply patch nnnn (Which number ) ?
Is it possible to install Enterprise Manager Grid Control 10.2.0. from scratch ? Where can I download the ressource ?
Thank you.

You can check this:
[http://www.oracle.com/technology/software/products/oem/htdocs/gridR3_10203_readme.html]
steps are outlined here:
[http://www.oracle-base.com/articles/10g/Oracle10gR2GridControlInstallationOnRedHatAndCentOS.php]
Edited by: Anantha on Apr 14, 2009 11:23 AM

How to export Oracle 10g Enterprise Manager Grid jobs?

I need to save all current Oracle 10g Enterprise Manager Grid jobs before our migration. We are running Oracle 10.1.0.4 on Solaris 9. How can I save off the jobs to a file and re-import these after our migration into the new Grid server?
Thanks,
Ben Prusinski

Hi!
Have you been able to export your jobs? If you have, I would appreciate it if you could share it with me..
Thanks!!

System copy method for BusinessObjects BI Enterprise XI 3.0 (Windows)

Hi,
We intend to replicate the same existing BOBJ system for use with another project's development.
Does anyone know what is the easiest method of system copy for BusinessObjects BI Enterprise XI 3.0 (Windows)?
Will a blank copy through Window's backup/restore work?
Thank you.

Hi,
the easiest way would be:
- extracting all content from the existing 3.0 to a biar file
- install the new server os
- install all BO componentes on the new server
- import the biar file
You cant make something like an image from the existing server and then put it back on a new one. You have to rename the Server and than you will get problems with your BO installation. You can avoid this by re- deploying the WAR Files and updating the Repository Objects in the CMS.
But the above mentiones solution will be faster.
Regards
-Seb.

ASM without Enterprise Manager Grid Control

Dear Gurus,
Can ASM be configured on Oracle 11g R2 without Enterprise Manager Grid Control ?
If so, how?
/Regards

Thanks Jose,
But it seems asmca is not on my server were I installed Oracle 11g R2. With your input I have been able to search in the right direction though. The following page seems to say that the Oracle grid infrastructure must be installed, as asmca is part of it:
http://download.oracle.com/docs/cd/E11882_01/install.112/e10840/oraclerestart.htm#BABGDFIC
It states this:
If you do not have Automatic Storage Management installed and you want to use Automatic Storage Management as your storage option, then you must complete an Oracle grid infrastructure installation before you start your Oracle Database installation.
To me this seems like overkill (having to install 3GB extra software to test if ASM is what we need, where in Oracle 10g no grid infrastructure was needed).
/Best regards
/9350831
Edited by: user9350831 on 24-jun-2010 21:41

Entreprise manager versus enterprise manager grid control

Hello,
This may seem a dummy question, but wath is the difference between Enterprise Manager and Enterprise manager grid control?
Thanks

And the anwser is:
Check document OEM Concepts page 12-1.
Thanks
Gonçalo Ribeiro

Patch for DST for Enterprise manager Grid on windows.

Similar Messages

Maybe you are looking for