Patch for editing raw images in pse8 wouldn't download . please help!

I want to edit raw photos in pse, and downloaded the patch from adobe, but when i went to 'unzip' it, the 'unzipper'--not real tech savvy here, sorry-- said not all files could be extracted. What? Do you think it could be what i'm extracting with? Thanks for your help.

me again
i get a message that says
'error loading updater workflow'
i am using the adobe application extractor to unzip files. can i use something esle perhaps?

Similar Messages

  • New lame workaround for editing RAW images in Photoshop

    Instead of re-importing, I open the image in ACR, then jump back to iPhoto and make some inconsequential and quick change (sepia, anyone?), then when saving from Photoshop, I navigate to the same roll in Modified that I came out of in Originals and save as a jpg (over the Enhance/Sepia/Edge Blur/whatever). The edit I made in iPhoto (don't forget to save in iPhoto before saving from Photoshop) tells the library to use the jpg from the Modified folder (instead of just using it temporarily while it parses the RAW file).

    sorry, but I disagree. I don't think it's lame at all. The only thing I would add is that it's important to unselect "Save edited RAW files as 16 bit TIFFs", unless of course you intend to save your Photoshop (or other editor) files as TIFFs.

  • Cant figure out how to edit raw images

    I am using a windows computer and have Photoshop elements 10. I'm trying to edit raw images but every time I try to open a RAW file it says that its the wrong type of file. I tried downloading Camera raw. Elements 10 is compatible according to adobes' site, up to camera raw update 6.7, and that's the first version that my camera (Sony a-57) is compatible with camera raw. I followed the troubleshooting help and ended up deleting and re-installing Photoshop elements but it still says that its the wrong type of file and wont let me open it. 

    Which version of windows are you using?
    This is the camera raw 6.7 updater you tried?
    Adobe - Photoshop Elements : For Windows : Camera Raw 6.7 update for Elements 10
    I'd try running the above 6.7 camera raw plugin updater from the linked page above.

  • Why won't my edited RAW images show after a LR re-install onto a new Hard Drive?

    Hi there. Recently my hard drive took a (hike) and crashed - data may or may not be recoverable (Geeks are working on that), and I needed to reinstall my CS5 and Lightroom software to a new hard drive (I had to buy a new one). All of my RAW photos are stored on an external drive and were not harmed, thankfully.  Here is my dilemma. Most of the presets I used also went crashing with that hard drive, (yes I believe they were backed up but also on that hard drive...stupid I know-trust me I know!!) but most of them were the free ones from the adobe recommended users on this site. I actually found many of my favorites still posted on the Adobe site and re-downloaded and installed the presets I'd been using the past year and a half, and imade sure those presets were housed properly in their folder via Preferences in Lightroom. Great. I can continue on with my work. WRONG! When I went to go import a recent shoot that I had already edited, it imported the RAW files but none of the previous edits I had worked on for these photos were showing up...it was as if I didn't even touch them and they came right from my camera. What in the world is going on? I'm baffled...and freaking out as I have thousands upon thousands of edited shoots in RAW, and I fear that none of the edits and enhancements made to those photos are going to be present and I'll have to start over. Please tell me that all of my last 2 years of editing photos are still with the RAW files?!!!
    I found a deal on a an HP Intell Core i7 processor) 2 TB hard drive tower, so I ended up needing to install the 64 bit versions of CS5 and Lightroom 3.6.
    I did test out the RAW (.NEF) file in Photoshop CS5 and my edited RAW image came up "correctly" - so I know that the information is still with the RAW image...I just need it to work and show in lightroom, as it is easier to export the files to the sizes I need them to be.
    Please be kind in your replies...I appreciate any help/guidance I can get on this. Plus the photos I need are for Seniors graduating in a few months here so you can imagine the panic mode is just a bit higher than normal. Many thanks.

    The default location for the backups created by Lightroom on exit is in the same folder as the catalog itself (i.e. that would be on the same faulty drive). It is, however, possible to redirect those backups to a different destination, such as a different hard drive.....but only you know if you did that or not. Do you have any other backups, e.g. drive level backups?
    Just to be clear, if you are importing afresh into a new catalog from Raw files that do have XMP sidecar files, you should see the final edited state from the previous catalog, but you won't see the individual history steps that got you there (as that's one of the things that are not included when you write XMP data from within Lightroom). If there is no XMP sidecar, you'll just get the original OOC image.

  • Output jpeg looks different than edited RAW image

    I just got CS6 and have been working on some new images in RAW.  Once I finished the editing I wanted to do in RAW, I saved the image as a jpeg, then clicked "open image" at the bottom of the RAW window.  The image that came up in Photoshop looked nothing like my edited RAW image.  It's as if none of the edits ever occurred.  I've looked on the internet and tried figuring it out on my own.  I'm at a loss and would appreciate the help.

    Noel - first of all, thanks much for taking the time to respond to my question.  You helped me realize (and I should have realized this last night) that my question and problem statement lacked a lot of detail.  I'm new to Photoshop, but I've learned a good lesson.  Here's some more details:  I use a Nikon D700, WIndows XP OS, and CS6.  After taking the images from my memory card directly into Bridge, I can see that the images look "good", meaning they match what I was seeing on my camera display.  The metadata for my photo of interest states that the color profile is RGB, and I assume this is sRGB?  I open the .nef file directly into CS6 RAW.  Once again the image in RAW looks just like it did in Bridge and on my camera display.  I like how it looks in general, but I make the manipulations I want in RAW (removing blemishes, softening skin, etc).  Prior to saving the manipulated image, I click on the Workflow Options link below the image and choose 8-bit, sRGB, then save it as a .jpeg.  Photoshop's color space has also previously been set to sRGB, so the two match.  If I open the image from RAW directly into Photoshop or open the newly created .jpeg from Bridge into Photoshop, the image no longer looks like what I saw in RAW.  The image looks sort of hazy, the black background that was completely black in the RAW image is now visible in the Photoshop image, and the model's skin, which looked nice and smooth in RAW, now looks pixelated. 
    You suggestions about color management make sense, and I bet I'm still making some sort of mistake in that regard.  Any ideas?

  • Confused about editing RAW images on iPad

    I just got a new 3rd generation iPad. I got it primarily to store, view, and edit RAW images captured by my Canon DLSR.
    My camera takes 12 megapixel images. I am able to download them from the camera to the iPad using the Apple Camera Connection Kit. I can later move them from the iPad to my Mac. Everything flows through at the full resolution. This is all good.
    My problems occur when I try to edit the images on my iPad. I have tried both Snapseed and Photogene. Both of these editors save the modified images at 3 megapixels. When I Google the exact dimensions of the saved files, I see they correspond to the size of the embedded JPEG preview stored in my Canon RAW files. So it looks like these editors are reading the embedded preview, and not the full RAW data. I do have Location Services enabled for the iPad and for these apps.
    Is there an iPad image editor that will read RAW image data at full resolution? Maybe Filterstorm? Or do I need to use a RAW converter like PaRAWnah?
    Thanks for the help!

    Thanks for the comments. I do use LR and PS at home, and I do most of my editing there. But since I don't have a laptop, I was hoping to be able to occassionally process a raw image on my iPad when away from home, in order to extract details from highlights or shadows that did not expose well on the jpeg preview.
    Since I originally posted this question, I did purchase PiRawNah just to see what it was like to use. You can see my thoughts on it here: http://forums.dpreview.com/forums/read.asp?forum=1046&message=41066455
    Thanks again for the help!

  • The new Update with the Patch for Camera Raw is not working. Code U44M1P34

    Hi there,
    i have a problem with the new CC Update - including the patch for Camera Raw 8.7.1
    Error Code: U44M1P34
    Photoshop CC (2014)
    After Effects CC (2014)
    Brisge CC
    The logfile shows 1 fatal error:
    FATAL: Payload 'Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number following.
    I have tried to uninstall an reinstall. Did not work at all, because the same Problem is shown.
    I did not install in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw Update.
    Are there others with the same Problem? Any ideas?
    Thanks in advance and Greetings,
    Joerg

    Hi Jeff,
    it seems that i have found a dirty, but working solution for my problem on this site: Getting fatal Exit Code 34 when installing an app
    To change these 3 folder names and reinstalling of my Programs worked fine without any errors:
    Adobe PCD -> Adobe PCDold
    backup -> backupold
    caps -> capsold
    Now the Programs are on the actual status with all updates included and everythings seems to be fine.

  • Editing RAW Images (NEF file)

    Hi
    I'm having trouble with editing RAW images from my Nikon D3000. This is my first time shooting in RAW so I have no idea what to do.
    I've downloaded the DNG Converter from Adobe and converted all my files to DNG. However, when I opened them on Photoshop Elements 4.0, they turned out VERY grainy! (Even though all the shots are clear when viewed on my camera)
    Also, I could not save my files as JPG (After converting them to DNG). The only options were TIFF, PNG, JPF (?).
    Please help as the photos are quite important.
    Thank you.

    What version of the dng converter did you download?
    What operating system are you using?
    It's hard to judge how much noise are in the photos from the camera LCD screen.
    Also, if you took the photos at high ISO settings or had the auto setting on, the camera may have used a high iso which can produce more noise.
    Do you have a copy of Nikon View NX2 so you can get an idea of what the raw photos should look like?
    (free from nikon: https://support.nikonusa.com/app/answers/detail/a_id/61/session/L3RpbWUvMTM3NDgyODQzMi9zaW QvOHQyQlU5d2w%3D)

  • Can I download Elements plugin for Processing RAW images from Sony ILCE6000?

    Can I download Elements plugin for Processing RAW images from Sony ILCE6000?

    If you are using PSE 12 or 13, just go to Help>Updates in the editor.

  • What is the easiest way or most direct way to convert an edited raw image to jpeg?

    What is the best way to convert an edited raw image to jpeg?

    After you open the edited raw file from the camera raw dialog using Open, then in photoshop elements use File>Save As>Jpeg

  • Raw images in Photoshop CS5 and download of 7.3 plug-in

    I am unable to open my Raw images from a Nikon D600 using CS 5. Also unable to download the 7.3 raw plug-in. Help wou;l be greatly appreciated. Thanks

    Thanks, i will upgrade to CS6, make life easier!
    Date: Wed, 5 Dec 2012 11:33:29 -0700
    From: [email protected]
    To: [email protected]
    Subject: Raw images in Photoshop CS5 and download of 7.3 plug-in
        Re: Raw images in Photoshop CS5 and download of 7.3 plug-in
        created by John Waller in Downloading, Installing, Setting Up - View the full discussion
    Camera Raw 7+ is only compatible with Photoshop CS6+ CS5's compatibility stopped with Raw 6.7 http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applic ations.html If you don't upgrade Photoshop, your next best option is to convert your D600 Raw files to DNG and work on the DNGshttp://www.adobe.com/products/photoshop/extend.displayTab2.htmlhttp://www.adobe.com/suppor t/downloads/detail.jsp?ftpID=5486
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4898876#4898876
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4898876#4898876
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4898876#4898876. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Photoshop won't open Raw images with my new Camera Canon 6D help! I use Photoshop CS5 extended version.

    Hello,
    I got a new camera and Photoshop and Lightroom won't open Raw images with my new Camera Canon 6D help! I use Photoshop CS5 extended version. and Lightroom 3

    Good news and bad news:
    The bad news is that you need CS6 or higher to open 6D RAWs. (The 6D didn't get support until Camera Raw 7.3; 7.0 premiered in CS6.) You can choose to upgrade (I'd recommend skipping CS6 and go straight for CC 2014 for $10/month) *OR*...
    ...the good news is that the DNG Converter can help you convert your RAWs into DNGs for use in CS5 and Lightroom 3.

  • How do I open RAW images from DSC_RX100M3?  I downloaded Adobe DNG converter 8.4, but could not convert the images?

    How do I open RAW images from DSC_RX100M3?  I downloaded Adobe DNG converter 8.4, but could not convert the images?

    Small correction to what SSprengel wrote...
    The RX100M3 is supported only by version 8.5.  It sounds like you need a newer version.
    Photoshop Help | Digital Negative (DNG)
    -Noel

  • Your content titled OB52 access for edit has been removed by SCN moderators. Please check your email inbox for more information.

    Hello Team,
    I am getting this error when I am trying to put some discussion.
    Your content titled OB52 access for edit has been removed by SCN moderators. Please check your email inbox for more information.

    True, normally it is not working and the guru does not know why. Your question is special as it does work yet you dont know why.
    Bottom line is that you must provide more information and have tried to analyze it yourself...
    Raghav Raghav asked originally:
    Hello Gurus,
    I am facing issue when one user is accessing OB52 and he can edit it.Can you please help me to restrict this access.
    That is not enough. But please analyze it and try again with more infos provided. 9 times out of 10 the user has some other role... (and we cannot see that...)
    Cheers,
    Julius

  • A previous and unrelated text always appears when I need to send a new text. This prevents forwarding texts also, which I need to do all the time for my business. How can I fix? Please help!

    A previous and unrelated text always appears when I need to send a new text. This prevens forwarding texts also, which I need to do all the time for my businss. How can I fix? Please help?

    Hi,
    This sounds like it is about Window positions.
    iChat has Default places for Incoming Invites.
    Video is always top Center of your Screen
    Audio and Text chats are Upper right with the Audio slightly lower than Text Chats.
    Secondary invites are sort of Stacked like when you open multiple files from the same App.
    Your outgoing Windows are "Remembered" as to where the last one was when you used it.
    This can be an issue if you use your Mac with a second display and turn Off Mirroring.
    You windows can get "left" on the other screen.
    Go to System Preferences > Displays and turn On Mirroring and the windows should come back to one Screen/display.
    If this does not help go to your Home Folder/Library/Preferences and delete (Drag to Trash) com.apple.ichat.plist and restart iChat.
    Unfortunately you will need to reset any iChat Preferences you have changed from defaults.
    10:42 PM      Tuesday; April 26, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
    , Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for

  • How to make a calc script on a dense dimension ?

    Dears, I want to make a calculation script on a dense dimension where : - I want to get an input from a member, then make a mathematical calculation , then populate the result in another member at the same dimension . For More Clarification : I have

  • Usb 2.0 to usb 2.0 drive transfer rates

    hi everyone. this may be obvious but i wanted to ask anyway. one of my external HD's drives died (well, the electronics died, the drives were fine). luckily i had everything backed up on a USB 2.0 OWC USB drive. i bought a new interface to plug the d

  • Control Mandatory fields on custom screen in Module pool program

    Hello all, I have developed a custom screen on which I have a table control with 5 fields. I wanted to make the first three fields mandatory. So instead of selecting the entry as "required" from the screen attributes for these input fields, I have lo

  • Crash on wakeup

    I have a Macbook Pro Retina, Mid 2012. As of today my computer crashes and reboots on wakeup.. Anyone else having this problem? Can i fix it?

  • Prob. viewing subreport on Web when navigating pgs., printing, or exporting

    I have a Crystal Report that returns various subreports depending on which report type is chosen when the end user is entering his/her parameters.  Every one of these subreports uses the same stored procedure to pull the data.  The only difference is