Patch for Jahia 3.1 to work WebLogic Server 6.1 with Struts is available!!!
I have a major patch for Jahia 3.1 server to work on WebLogic Server
6.1 (so far I've tested it against WebLogic Server 6.1 sp3 & sp4, I'm
sure it will work on sp1 and sp2 as well though). We do have complete
support for strtus. If interested email me at [email protected]
Regards
What is Jahia BTW?
"Vitaly Veksler" <[email protected]> wrote in message
news:[email protected]..
> I have a major patch for Jahia 3.1 server to work on WebLogic Server
> 6.1 (so far I've tested it against WebLogic Server 6.1 sp3 & sp4, I'm
> sure it will work on sp1 and sp2 as well though). We do have complete
> support for strtus. If interested email me at [email protected]
>
> Regards
Similar Messages
-
WebLogic Server 6.1 with Struts
Hi,
I am trying to put together a prototype using struts for our presentation layer.
The prototype works fine under Tomcat, but got an error related to one of struts
tag lib.
The error message is:
Error in using tag library uri='/WEB-INF/lib/struts-form.tld' prefix='form': The
Tag class 'org.apache.struts.taglib.html.ImageTag' has no setter method corresponding
to TLD declared attribute 'path', (JSP 1.1 spec, 5.4.1)
probably occurred due to an error in /index.jsp line 4:
<%@ taglib uri='/WEB-INF/lib/struts-form.tld' prefix='form' %>
I verified the tag libs are located in the correct directory. I wonder if it is a
known issue or not. If yes, is there any workaround for it?
Thanks a lot in advance
RoyHello Roy,
This was a known problem and was fixed in WLS 5.1 sp10 version.( issue
number : 046233 )
Maybe not in WLS 6.1 ?
I would suggest to open a case in our BEA support to get a fix.
Hope this helps.
Ludovic.
Developer Relations Engineer
BEA Support
"Roy Qian" <[email protected]> a écrit dans le message news:
3cd2abd3$[email protected]..
>
Hi,
I am trying to put together a prototype using struts for our presentationlayer.
>
>
The prototype works fine under Tomcat, but got an error related to one ofstruts
tag lib.
The error message is:
Error in using tag library uri='/WEB-INF/lib/struts-form.tld'prefix='form': The
Tag class 'org.apache.struts.taglib.html.ImageTag' has no setter methodcorresponding
to TLD declared attribute 'path', (JSP 1.1 spec, 5.4.1)
probably occurred due to an error in /index.jsp line 4:
<%@ taglib uri='/WEB-INF/lib/struts-form.tld' prefix='form' %>
I verified the tag libs are located in the correct directory. I wonder ifit is a
known issue or not. If yes, is there any workaround for it?
Thanks a lot in advance
Roy -
Revision: 13207
Revision: 13207
Author: [email protected]
Date: 2009-12-23 13:11:43 -0800 (Wed, 23 Dec 2009)
Log Message:
Accepted patch for UITextField textHeight property to work around an underlying bug in the player.
flash.text.TextField does not take into account the leading on the final line of text when measuring itself, yet will scroll if it is not given this extra height. The player has retired this bug.
Ported componentSmoke test to basicTests. If this fail it means the player has fixed the bug and we need to remove the workaround.
QE notes: components/Text/Properties/Text_Properties_tester Checking_Property_textHeight needs to be updated
Doc notes:
Bugs: SDK-24461
Reviewer:
Tests run: checkintests, mx Label, Panel, TextInput, TextArea and Text
Is noteworthy for integration: no
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24461
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITextField.as
flex/sdk/trunk/frameworks/tests/basicTests/halo/scripts/TextTestScript.mxmlRevision: 13207
Revision: 13207
Author: [email protected]
Date: 2009-12-23 13:11:43 -0800 (Wed, 23 Dec 2009)
Log Message:
Accepted patch for UITextField textHeight property to work around an underlying bug in the player.
flash.text.TextField does not take into account the leading on the final line of text when measuring itself, yet will scroll if it is not given this extra height. The player has retired this bug.
Ported componentSmoke test to basicTests. If this fail it means the player has fixed the bug and we need to remove the workaround.
QE notes: components/Text/Properties/Text_Properties_tester Checking_Property_textHeight needs to be updated
Doc notes:
Bugs: SDK-24461
Reviewer:
Tests run: checkintests, mx Label, Panel, TextInput, TextArea and Text
Is noteworthy for integration: no
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24461
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITextField.as
flex/sdk/trunk/frameworks/tests/basicTests/halo/scripts/TextTestScript.mxml -
Error number 148.3 Licensing for this product has stopped working. I rebooted several times to no avail. Still get the same error message everytime I try to start Photoshop. I'm using Windows 7 -- 64 bit
If you can not use CS4 menu Help>Activate|Deactivate to get the install working again you may need to re-install CS4.
-
Weblogic Server 8.1 with SP6
Currently we are running with BEA Weblogic server 8.1 with service pack upgraded to SP6 lately. I heard that it will require the upgrades of Oracle database to V 9.2.0.4. Is this required? I am wondering if we need to workout this upgrade to our db. Thanks.
I saw that the documentation mentioned Oracle9i RAC (for Oracle 9.2.0.4) supported in SP6. Does it mean those other lower versions are not supported?
http://e-docs.bea.com/platform/suppconfigs/configs81/81_over/overview.html
http://e-docs.bea.com/platform/suppconfigs/configs81/81_over/supported_db.html -
The new Update with the Patch for Camera Raw is not working. Code U44M1P34
Hi there,
i have a problem with the new CC Update - including the patch for Camera Raw 8.7.1
Error Code: U44M1P34
Photoshop CC (2014)
After Effects CC (2014)
Brisge CC
The logfile shows 1 fatal error:
FATAL: Payload 'Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number following.
I have tried to uninstall an reinstall. Did not work at all, because the same Problem is shown.
I did not install in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw Update.
Are there others with the same Problem? Any ideas?
Thanks in advance and Greetings,
JoergHi Jeff,
it seems that i have found a dirty, but working solution for my problem on this site: Getting fatal Exit Code 34 when installing an app
To change these 3 folder names and reinstalling of my Programs worked fine without any errors:
Adobe PCD -> Adobe PCDold
backup -> backupold
caps -> capsold
Now the Programs are on the actual status with all updates included and everythings seems to be fine. -
Weblogic Server 8.1 with Service Pack 6 will support for ALSB?
Hi,
Can any body tell me, whether the ALSB is compatible with Weblogic Server 8.1?
We have requirement to integrate ALDSP and ALESB using Weblogic Server 8.1.
Thanks in advance.
Regards,
VenI'd agree with Mike, go for the latest versions (from wls 10 onwards), we're using ALDSP 3.2, ALSB 3.0 and WLS 10mp1. I think you'd have to go back to ALSB 2.5 to run on WLS 8.1 and this doesn't have the performance or functionality. (we started with ALDSP 2.5/WLS 8.1 and ALSB 2.6/WLS 9.2)
-
Weblogic Server 6.1 with MS Windows 2000 Cluster
Hello everybody,
following situation:
We want to implement a Microsoft Cluster (Failover) with MS Cluster Service and
2 nodes (maybe later we try the Weblogic Software clustering with load balancing
as a part of an documentum and infotehna DMS). On both nodes we made the same
test installation of the Weblogic Server 6.1 and started it with services (instead
of cmd-file).
It's working fine seperate on every node, than we started to implement the MSCS
on these machines and only one node is working. On the other node (after a failover
to this node) the service started but break down only a few seconds later.
Now, my question is: Can we use the Weblogic Server 6.1 in an Windows 2000 Advanced
Server Failover Cluster with 2 nodes? Or do we need a special Add-on to do this???
Best regards,
RonnyRonny,
I'm don't know the specifics of MS Cluster Service but given that it works like
other common HA frameworks (assumption on my part) you may need to use the MS
cluster framework in isolation from the 'software-based' clustering approach that
WLS 6.x currently provides. For example, in other HA Frameworks there is typically
a heartbeat mechanism that informs the framework that a node is dead and the framework
in turn calls scripts that migrate the failed node 'applications' over to the
healthy node. In WLS, you could mimic the same approach where a single admin
server fails over to a backup server not using the WLS 'software' admin/mgd server
cluster value-add. In others words, you would need to script a heartbeat mechanism
for the single WLS server and also script failover to a backup node when the heartbeat
indicates 'failure'. This technique would be used in isolation (not using the
current WLS software-based cluster configuration).
My 2 cents,
Chuck Nelson
DRE
BEA Technical Support -
Weblogic Server upgrade along with Forms & Reports
Hi Gurus,
I would need some help on upgrading one our Weblogic server from 10.3.2 to 10.3.6. Also, we have forms & reports ( version: 11.1.1.2 ) configured on this server and we would have to upgrade this to version: 11.1.2.1
Can you please help me or point me to a good document to do this.
I am a DBA and my weblogic experience is very little.
Thanks
Prakash
Edited by: 1004698 on May 8, 2013 4:52 AMHi Prakash,
First, very smart decision to move to 11gR2 Forms - performance is much better in 11gR2. Customers i've worked with, are very happy with it compared to 11gR1.
Now, if you want to upgrade from 11gR1 (11.1.1.2) to 11gR2 Forms (11.1.2.1), I would do a new install. Simply because, there is no simple/straight-forward Architecture upgrade path from 11gR1 to 11gR2 Forms. And the installation will also be a clean isntall. Don't worry about your forms/reports source code, you can just recompile no problem in 11gR2 Forms.
If you want to do a re-install heres some things to consider:
1.) Update and/or Install an Oracle certified JDK - you can verify the correct JDK in the certification matrix provided by oracle: http://www.oracle.com/technetwork/developer-tools/forms/oracle-forms-11gr2certmatrix-519680.xls
2.) Verify your OS is certified with Forms 11gR2
3.)Install WLS in a new middleware Home.
4.) At his point, you should install the Oracle Forms 11gR2 Binaries Home in your new 10.3.6 Middleware Home.
5.) Optional: If you want the same exact ports as 11gR1 Forms installation - you'll have to shutdown all the 11gR1 Forms/Reports processes- OPMN Processes, WLS_FORMS, WLS_REPORTS, AdminServer.
5.) Run the Forms 11gR2 Configuration Wizard to install and configure a new Forms 11gr2 domain.
6.) After the configuration wizard completes successfully:
- Migrate over your formsweb.cfg/env settings
- Migrate ORACLE_HOME customizations
- Definitely install/configure webutil components
- Migrate over any other additional customizations
If you run into any weird issues, check out my companies knowledge base, its full of installation knowledge: http://pitss.com/us/knowledgebase/
Hope this helps!
Gavin -
WebLogic Server installation Crashing with a fatal error - SIGSEGV
Hello WLS Gurus,
I am in the process of installing Discoverer 11 and I am facing problems with launching wls1036_generic.jar installer.
I have installed installed Java 7 as follows:
cd /u02/appldisc/11.1.1/Middleware
tar -xvzf jdk-7u25-linux-x64.tar.gz
JAVA_HOME=/u02/appldisc/11.1.1/Middleware/jdk1.7.0_25
I then excuted:
$JAVA_HOME/bin/java -Xmx1024m -jar wls1036_generic.jar
and the installer crashed with this error output:
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x0000003b09e14d70, pid=28328, tid=139864618293008
# JRE version: 7.0_25-b15
# Java VM: Java HotSpot(TM) 64-Bit Server VM (23.25-b01 mixed mode linux-amd64 compressed oops)
# Problematic frame:
# C [ld-linux-x86-64.so.2+0x14d70]
# Failed to write core dump. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again
# If you would like to submit a bug report, please visit:
# http://bugreport.sun.com/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x00007f34d03b9000): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=28346, stack(0x00007f34c4d3d000,0x00007f34c4e3e000)]
siginfo:si_signo=SIGSEGV: si_errno=0, si_code=128 (), si_addr=0x0000000000000000
Registers:
RAX=0x0000000000000001, RBX=0x00007f34d02bea50, RCX=0x000000009e982203, RDX=0x000000001fabfbff
RSP=0x00007f34c4e39ab8, RBP=0x00007f34c4e39c00, RSI=0x0000000000000000, RDI=0x0000000000000058
Can someone help?
Thanks
MathiasSee
“Generic WebLogic Server Installer generates a Crash immediately after opening GUI on ld-linux-x86-64.so.2 Library (Doc ID 1570688.1)” which states that
“ This is an issue with AVX support appearing on newer hardware. Default glibc is incompatible with it. This problem happens due to a Red Hat Bug: Segmentation fault in dynamic loader on AVX enabled CPU “
Solution:
1. Set the following Environment Property on your active Shell.
- open a bash terminal and type in:
$ export LD_BIND_NOW=1
2. Re-Run the installer as bellow example.
$JAVA_HOME/bin ./java -jar wls1036_generic.jar
Mathias -
Adding WebLogic Server Domain fails with UnsupportedClassVersionError
Hi all,
I am trying to add a WebLogic Server 10.3 domain to the Grid Control, but receive the following error:
java.lang.UnsupportedClassVersionError: weblogic/jndi/Environment (Unsupported major.minor version 49.0)
The discovery wizards asks for 'Administration Server Home Directory'
The help document states:
If you are adding BEA WebLogic Manager Server Release 9.x or higher, then specify the absolute path to the directory
where wljmxclient.jar and wlclient.jar files are located. For example, <WL-HOME>/server/lib.
The JDK version of BEA WebLogic is 1.6.x
The JDK version of the Grid Agent is 1.4.2
Clearly their is a mismatch here!
Is there any solution to this?
Thanks,
Knut
Edited by: user585799 on Feb 17, 2009 2:13 AMThis is not a supported configuration .10.2.0.4 GC is not certified with WLS 10.3
Edited by: mnazim on Feb 17, 2009 2:56 AM -
List of all Weblogic server version compatible with Oracle BPEL 10.1.3.x
Hi all,
Kindly let me know all the web logic server versions compatible with 10.1.3.x.
I know that WLS 9.2 works fine as i have already installed SOA Suite 10.1.3.4 with WLS 9.2 MP3.
But I am not sure bout the rest of the versions of WLS.
i need en exhaustive list of all the versions of WLS compatible with SOA Suite or standalone BPEL having versions - 10.1.3.3 or 10.1.3.4.Hi Vishal,
11g Certification Matrix on OTN
http://www.oracle.com/technology/software/products/ias/files/oracle%20fusion%20middleware%2011gr1%20(11%201%201%201%200)%20certification%20matrix.xls
10.1.3.4
http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_r3_10.1.3_matrix.xls
10.1.3.3
http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_r3_10.1.3_matrix.xls -
It freezes up all the time..."Firefox not responding". Also it will mot allow me to share YouTube videos and Facebook. i have none of these problems with IE or the old Firefox 3.
An update was released today. Give it a spin and see whether it helps! (Currently, I believe you would have to download the full install, but hopefully the update button will start working in a few hours.)
For what it's worth, I haven't noticed any problems running Firefox 4 on Windows 7, but I have not tried posting anything to YouTube or Facebook. -
Configure Log File for each web application deployed in weblogic server usi
Hi All,
How do I configure Log4J to log separately for each web application? i.e. Assuming, I have a web application "AWeb" and a web application "BWeb". I need a log file to be created for AWeb Separately and BWeb Separately. i.e. All the log information for "AWeb" web application will be stored in AWeb.log and all the "BWeb" web application will be stored in BWeb.log
Do you have any sample code and configuration details for the above-mentioned requirement?
Thanks in Advance,
C R BaradwajYou do not need to do anything strange, just use log4j the usual way with the exception that you do not need to init log4j (this is not necesary when using a log4j.xml.)
A minimal sample of a log4j.xml is
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">
<appender name="ConsoleAppender" class="org.apache.log4j.ConsoleAppender">
<layout class="org.apache.log4j.SimpleLayout"/>
</appender>
<root>
<priority value ="debug" />
<appender-ref ref="ConsoleAppender"/>
</root>
</log4j:configuration>
You just have to be sure that you have different log4j.xml in your classpath for different web applications.
Regards,
LG -
Problems setting up Weblogic Server 9.2 with Oracle AQ
We are in the process of upgrading from WLS81 to WLS92 and I'm currently trying to set up the environment. We have applications communicating with 3 different JMS-servers; Sonic, WMQ and Oracle AQ. For both Sonic and WMQ the connection seem to work fine. We get an active application, and the beans connecting to queues on those servers reports as 'connected'.
For Oracle AQ I must be doing something wrong, but I can't for the life of me figure out what it is.
Our setup is as follows:
We have a domain-scoped startup class that binds the AQ-queues and a custom QueueConnectionFactory to the WL default context. Giving them a name like aqadapter-AQ_ARE_PING.
We have defined a System Resource, within which we have defined AQ as a Foreign Server. Within this foreign server we have each queue mapped to the queue-names bound through the Startup class. Likewise we have a qcf mapped to the qcf bound through the startup class.
The application contains message-driven beans which are supposed to be listening to the AQ-queues. In weblogic-ejb-jar.xml each target queue is mapped within each bean to the same name mapped within the Foreign Server element.
All this results in MDB's that report as 're-connecting' and 'initializing' and the following message in Server1.stdout for each MDB:
<Mar 28, 2007 4:27:58 PM CEST> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: ARE_Ping is unable to connect to the JMS destination: AQ_ARE_PING. The Error was:
javax.jms.InvalidDestinationException: JMS-125: Invalid Queue specified>
Any ideas what I am doing wrong? It seems to me that all the settings are as similar as the way they are set up on WLS81 as we could get them.
Anyone reading this that have done this before? Setting up WLS92 or WLS90 to interact with Oracle AQ?
Regards,
Frode Laukus
Edited by laukus at 03/28/2007 7:53 AMHi Frode
Have you managed to find a solution to this issue?
We are trying to do something very similar and encountering all sorts of issues.
Are you using the DIPSStartup classes to register your queues & qcf with the WL JNDI? I haven't managed to get these classes to work with the AQJmsSession in the latest release of the aqapi13.jar files.
Hopefully we can sort out a workable solution between us :)
Andy
Maybe you are looking for
-
Confirmation Reversal - PO Line Item Edit Issue
As per the business rule, if you reverse/delete the confirmation on a line item on the PO, you should be able to edit that line item. However, in my case, even after deleting confirmation also, PO line item cannot be changed. Generally when you delet
-
Help sought customizing a SP 2010 custom list template
I am forced to use InfoPath 2010 to edit and then publish the form for a custom list, due to problems that SP 2010 has displaying a set of lookup columns on the form. Now that I have made the initial change, there are some other customizations that t
-
Hi all, I am trying to learn ORACLE Real Application Clusters. I have installed 11g clusters on single node and configured oracle 10g database on this cluster, from here can you please give me your valuable suggestion on how to proceed in learning th
-
CS6 Vector Shape not visible in Layers Panel
Anyone have any idea how to get my shape outline back? Adjusting the panel preferences has no effect. Really obnoxious bug, since obviously I can't even see my shape until I select it (and even then, it's pretty hard to find).
-
I have a script that execute some sql.It produces some error and the error message is shown in the page.I want to stop showing error on the page.What should i do?