Patch for upgrading 10g AS from 10.1.2.0.2 to 10.1.2.1

Hi All,
I am in process of doing 10g AS integration with 11.5.10.2.
here as per documentation i have seen that this 10g AS has to upgrade
My 10g AS version is 10.1.2.0.2
The below msg is as per Oracle Documentation
If you are running Oracle Application Server 10g Release 2 (10.1.2.0.0) or Oracle Application Server 10g Release 2 (10.1.2.0.1) Standard Edition One, then apply the Oracle Application Server 10.1.2.1 patch before applying Oracle Application Server Portal Upgrade.
I have searched a lot in metalink for patch but no luck
So please let me know the right patch to upgrade my 10g AS from 10.1.2.0.2 to 10.1.2.1
Also any supporting document for this upgrade
Thanks in advance
Regards,
Bhanu Chander.

I have downloaded patch p5983622_10123_LINUX.zip
and first tried to upgrade infrastructure home
but while upgrading it says
oracle universal installer has detected that your database is version 10.1.0.4.2 before you can continue you must apply a required database patch set.
But in documentation i have seen
Supported Database Releases
The portal schema may be residing in an OracleAS Metadata Repository, or in a customer database. The database in which the portal schema resides must be one of the following supported releases:
Oracle Database 10g (10.1.0.4.2) or later
Please let me know what should i do now
Thanks in advance
Regards,
Bhanu Chander.yes, because the Infrastructure Database needs to be upgraded. And it is listed in the documentation of the same patch set.
In the Readme file for the patch set 3 (5983622 or p5983622_10123_LINUX) as you mentioned, please see Section 5. Before you begin applying this patch set
It reads the following:
"5.6 Applying the Oracle Database 10g Release 1 (10.1.0.5) Patch Set
The Oracle Database 10g Release 1 (10.1.0.5) patch set must be applied to all database instances (for both the Identity Management and Metadata Repository installation type and Metadata Repository only installation type) before applying OracleAS 10g Release 2 Patch Set 3. If OracleAS 10g Patch Set 2 (10.1.2.2.0) has been applied previously, then you do not have to apply the database patch."
hope that explains what you need to do. i.e, your infra DB version is 10.1.0.4.2 and needs to be upgraded to 10.1.0.5.
AMN

Similar Messages

What's the latest patch for oracle 10g client?

what's the latest patch for oracle 10g client? 6810189?

The same as the patch for the Oracle database of the same version and operating system. Since you didn't specify the operating system or the particular Oracle version (10g could mean 10.1 or 10.2), it's hard to be more specific.
Justin

Latest Oracle patch for DBA 10G.

Hi,
I'm looking for the latest Oracle patch for release 10G.
Is the latest Oracle patch 10.2.0.2 or 10.2.0.4 ?
At the following link https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000332839&_SCENARIO=01100035870000000202&
when I click 10.2.0.4 is an empty folder that doesn't contain any patch.
Best regards

Hello,
regarding to sapnote #871096:
> Release 10.2.0.4 is not available or has not yet been released.
>
>The next Oracle Release 10.2.0.4 has not been made available by Oracle yet. No date has yet been set for the release. As soon as Release 10.2.0.4 is made available by Oracle and has been tested and released for use with SAP, it will be announced in this note.
Regards
Stefan

Do we have a patch for upgrade ADFRuntime from 11.1.1.5 to 11.1.1.6?

Hi,I had installed the WLS 10.3.5.0 and apply the ADF runtime 11.1.1.5.While now i want to upgrade it to 11.1.1.6 .So do we have a patch for it?
If not ,what can i do?

chk this
http://docs.oracle.com/cd/E23943_01/web.1111/e13754/intro.htm#sthref6
https://blogs.oracle.com/onesizedoesntfitall/entry/adf_runtimes_vs_wls_versions

Best Practices for Upgrade UCS firmware from 2.0 to 2.2?

Hi
I have Cisco UCS system ( 2 FI, 4 Chassis with 32 Server ) running 2.0 firmware. Now I want upgrade to 2.2. When I check document "Upgrading Cisco UCS from Release 2.0 to Release 2.2", I see have 2 solution:
- 1. Upgrading from Release 2.0 with Auto Install -> Step simple but all server reboot at same time.
- 2. Manually Upgrading from Release 2.0. -> Step more complex but can upgrade server one by one.
My question:
- Can I "Upgrade the infrastructure firmware with Auto Intall but upgrade Server with Manual"?
- What is best for my case?
Thanks

Hi Phamcongtuan,
In UCS you can create host firmware policy that can be used to upgrade the firmware of your blades. Once you upgrade the infrastructure firmware, you can apply the host firmware policy to the service profiles of your blades. If you are using service profiles templates you will need to unbind the service profiles and apply the policy to the individual servers.
Host Firmware Package
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/cli/2-2/b_CLI_Firmware_Management_22/b_CLI_Firmware_Management_22_chapter_01000.html#concept_6982A188474A452CBFDBBDD7DD4921F3

Mandatory Patches for upgrade

We are in process for upgrading 8.1.7.4 (32 bit) to 10.2.0.4 (64 bit) on AIX . We downloaded so far Base 10.2.0.1 and patchset 10.2.0.4 plus latest CPU patch. Does anybody knows if any Oracle recommended Mandatory Patches out there so we could apply before database upgrade.
Thanks.

I end up opening TAR with Oracle and they send me steps on how to find list of Recommended Patches.
Now to find the recommended patches on 10.2.0.4.0 do the following
1. Log into metalink.
2. Click on the tab patches and updates
3. Click on the link "Oracle Database" under "Recommended Patches"
4. Select the release as "10.2.0.4.0" and platform as "IBM AIX Based Systems (64-bit)"
5. Click on GO. This will list you the recommended patches.

Where can I get Patch for upgrade SAP GUI 3.O to 3.5

Hi All,
Could you please let me know the patch to upgrade SAP GUI 3.O to 3.5.
Thanks in Advance.
Sridhar.

Hello Sridhar,
I think you should get the latest SAP GUI Version which is 6.40 from ftp://ftp.sap.com/pub/sapgui/.
Regards
Gregor

Is there any patch for migrating database server from oracle to sql server

we have very large application build using oracle forms 6i
(release 2) & reports 6i & Oracle Database as back-end server.
Now we want to port our application on sql server. Is there any
patch available , so that we don't have to change anything at
application level except connection string.
currently I am using :
oca 6.0.5.35.0
sql server 2000
odbc 3.5xxx
d2k 6i(release 2)
But we have to make lot of changes at application level.
So any one can tell me about any tool, or patch for converting
without changing too much at application level.
Thanks
yogesh

refresh

Where to find 8.1.7 patch for upgrading from 8.1.6?

I need to upgrade my Oracle DB from version 8.1.6.0.0 to 8.1.7 before upgrade to 9i.
However, anyone could tell me where I can get the version 8.1.7 patches or files for 8.1.6.0.0 upgrade?
Many thanks!

You do not have to upgrade to 8.1.7 unless you must use the GUI tool for migration. If you use export/import or something like it, you do not need to follow the 8.1.7 upgrade path.
Kind regards,
Russ

ABAP and Kernel Patches for Upgrade and Conversion in 4.6C

Hi,
We are in a process of upgrade and unicode conversion for the source release 4.6C (Kernel 46D_EXT Patch 2225).
"Combined Upgrade&Unicode Conversion Guide" for "SAP Basis 4.6C u2192 SAP NetWeaver 7.0 application Server ABAP Unicode Including Enhancement Package 1 Support Package 01 - 06" , In Software Requirements step, it says
"3. Import 4.6D Kernel patch 2326 from SAP Service Marketplace according to SAP Note 19466"
We wanted to know whether "IT IS ABSOLUTELY NECCESSARY TO GO FOR THE KERNEL PATCH 2326". We dont have "EBCIDIC code pages" in our MDMP system.
We need to know becauase we are also doing OS migration from AIX to Sun and this step will add to our production downtime.
Please advice what are the other causes we should go for the kernel 2326.
Regards

Hello Mr. Nils Buerckel,
Thanks for the reply.
We wanted to be very sure whether we should used Kernel 46D Kernel patch 2326 (As it is specifically mentioned in the SAP CU&UC guide and in SAP Note 867193, It is mentioned that "This patch contains enhancements that are required to execute the "INDX Analysis" scan)
OR
Can we go for the latest kernel patch avaialable at market place? And Will the latest kernel patch also contains the "enhancements that are required to execute the "INDX Analysis" ?
Please reply
Thanks

Patch for upgrading OBIEE 11.1.1.5.0 to 11.1.1.6 for OBIA 7.6.9.4

Hi,
We have installed OBIEE 11.1.1.5 and installed OBIA 7.6.9.4.
But when we try to open RPD file it gives error of compatibility.
Can anyone tell me what is the Patch number which can upgrade OBIEE to 11.1.1.6
Thanks In Advacne,
Ankit

It has to be more than 11.1.1.6.4+ for BI apps 7.9.6.4
Check this certification matrix from Oracle.
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fwww.oracle.com%2Ftechnetwork%2Fmiddleware%2Fbi-applications%2Fbiapps7964cert-matrix-1891451.xls&ei=OVucUf7nI9HjrAeAkoGgDQ&usg=AFQjCNFpBX79KDDbfKsXqW3pL5RQgknnfQ&sig2=A7rBJwbMXKXdkJHP7NfFBw&bvm=bv.46751780,d.bmk
Also
Check this note ID from oracle support you will have your answer.
OBIEE 11g: Required and Recommended Patches and Patch Sets [ID 1488475.1]
Mark as correct,
Regards,
Veeresh Rayan

Error while upgrading 10g AS from 10.1.2.0.2 to 10.1.2.3

Hi All,
I am in process of doing 10g AS integration with 11.5.10.2.
As per documentation i have seen that 10g AS has to upgrade
My 10g AS version is 10.1.2.0.2
and my database version is 10.1.0.4.2
I have downloaded patch p5983622_10123_LINUX.zip
and first tried to upgrade infrastructure home
but while upgrading it says
oracle universal installer has detected that your database is version 10.1.0.4.2 before you can continue you must apply a required database patch set.
But in documentation i have seen
Supported Database Releases
The portal schema may be residing in an OracleAS Metadata Repository, or in a customer database. The database in which the portal schema resides must be one of the following supported releases:
Oracle Database 10g (10.1.0.4.2) or later
Please let me know what should i do now
Thanks in advance
Regards,
Bhanu Chander.

Hi ,
$ORACLE_HOME/j2ee/OC4J_Portal/application-deployments/portal/OC4J_Portal_default_island_1/application.log
09/09/24 06:24:21 portal: Max URL _debug value '1'.
09/09/24 06:36:33 portal: [module=PortalServletContextListener, thread=Shutdown] Portal Servlet Context Listener destroy started
09/09/24 06:36:33 portal: [module=PortalServletContextListener, thread=Shutdown] Repository Service destroy started
09/09/24 06:36:33 portal: [module=PortalServletContextListener, thread=Shutdown] Repository Service Config destroy started
09/09/24 06:36:33 portal: [module=PortalServletContextListener, thread=Shutdown] Repository Service Config destroy finished, 0 ms
09/09/24 06:36:34 portal: [module=PortalServletContextListener, thread=Shutdown] Repository Service destroy finished, 1003ms
09/09/24 06:36:34 portal: [module=PortalServletContextListener, thread=Shutdown] Portal Servlet Context Listener destroy finished, 1004ms
09/09/24 06:36:34 portal: Page Servlet destroy started at 1253788594974 millis
09/09/24 06:36:34 portal: Page Servlet destroy ended at 1253788594977 millis, duration was 3 millis
09/09/24 06:36:34 portal: [module=RepositoryServlet, thread=Shutdown] Repository Servlet destroy started
09/09/24 06:36:34 portal: RepositoryServlet: destroy
09/09/24 06:36:34 portal: [module=RepositoryServlet, thread=Shutdown] Repository Servlet destroy finished, 0ms
09/09/24 06:36:34 portal: [module=PortalServlet, thread=Shutdown] Portal Servlet destroy started
09/09/24 06:36:34 portal: PortalServlet: destroy
09/09/24 06:36:34 portal: [module=PortalServlet, thread=Shutdown] Portal Servlet destroy finished, 0ms
09/09/24 06:36:34 portal: Stopped
09/09/24 06:36:34 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost.localdomain))
09/09/24 08:35:53 Started
09/09/24 08:36:13 portal: ServletLogger - Logging level: 2
09/09/24 08:36:13 portal: [module=PortalServletContextListener, thread=Orion Launcher] Initializing Portal Servlet Context Listener
09/09/24 08:36:13 portal: jsp: init
09/09/24 08:36:13 portal: Started
09/09/24 08:38:37 portal: PortalServlet: init
09/09/24 08:38:37 portal: ServletLogger - Logging level: 2
09/09/24 08:38:37 portal: [module=PortalServlet, thread=AJPRequestHandler-ApplicationServerThread-5] Initializing Servlet: PortalServlet
09/09/24 08:38:38 portal: RepositoryServlet: init
09/09/24 08:38:38 portal: ServletLogger - Logging level: 2
09/09/24 08:38:38 portal: [module=RepositoryServlet, thread=AJPRequestHandler-ApplicationServerThread-5] Initializing Servlet: RepositoryServlet
09/09/24 08:38:39 portal: page: init
09/09/24 08:38:39 portal: Cache: Cache is enabled.
09/09/24 08:38:39 portal: Pool: Initialized with the following pools : [oracle.webdb.pool.http.HTTPConnectionKey]
09/09/24 08:38:39 portal: Created mobileXML to HTML stylesheet object
09/09/24 08:38:39 portal: PPE version : 10.1.2.0.2 (11082005)
09/09/24 08:38:39 portal: Tuning parameter values : poolSize(Fetchers)=25[default=25] : minTimeout(MinTimeout)=5s[default=5s] : requesttime(DefaultTimeout)=15s[default=15s] : stall(MaxTimeout)=65s[default=65s] : queueTimeout(QueueTimeout)=10s[default=10s] maxParallelPortlets=20[default=20] maxParallelPagePortlets=10[default=10]
09/09/24 08:38:39 portal: Max URL _debug value '1'.
what do you see when you get the error on trying to login.
Same error
An error occurred while processing the request. Try refreshing your browser. If the problem persists contact the site administrator

Urgent help needed while applying patch for upgrade with conflicts

I try to upgrade 11.2.0.2 to 11.2.0.3 on LInux environment.
I have to apply patch P1253900 before the upgrade per oracle doc.
however I got following conflict:
Verifying environment and performing prerequisite checks...
Checking skip_duplicate
Checking skip_subset
Conflicts/Supersets for each patch are:
Patch : 12539000
Conflict with 12827726
Conflict details:
/u01/app/grid/product/11.2.0/grid/lib/libserver11.a:/ksxp.o
Following patches have conflicts: [ 12827726 12539000 ]
Refer to My Oracle Support Note 1299688.1 for instructions on resolving patch conflicts.
I checked above oracle note, and did not say any resolution.
If anybody had the same issue before, please help me with the resolution.
Thanks in advance.

Follow the steps in this MOS Doc
Database Patch conflict resolution [ID 1321267.1]
This MOS Doc is referenced in 1299688.1
HTH
Srini

Advice for upgrading to iCloud from MobileMe

I am about to ugrade my 20" Intel iMac (2 GB RAM). I will also enable iCloud on our iPhone 4S (2 devices in the house) to iCloud and I am seeking advice. BTW, we are running iOS 5.1.1 on both iPhones.
First off, I have backed-up and cleaned up my iDisk, so that's done. I have also deleted my MobileMe Photo Albums and Movies (all are backed-up) from my MobileMe Gallery.
Next, I have updated my iWeb site and published it to a folder on my hard drive. I may/may not have a third party host it ... that is a future decision, but for now, it is "preserved".
Now my question - What advice do you have for me before I embark upon this "upgrade". Am I missing anything? Any tips, tricks or pointers you have to offer would be greatly appreciated.
Thanks in advance.

My first observation is that your profile states that you are using OSX 10.6.8, iCloud is only included with OSX10.7.2 or better. Perhaps you should consider updating your operating system before moving to iCloud.
Secondly, although you would have had to do them eventually, migrating to iCloud will not stop you using your iDisk, gallery or iWeb hosting space. You can continue to use the services until June 30, 2012.
Finally before making the migration to iCloud from MobileMe, you may wish to back up your MobileMe mail, your contacts and your calendars.

File Need for Oracle 10g AS from Oracle 10g Jdeveloper

Dear All,
I have completed my application for running on Oracle 10g AS.
What files and the structure that I should maintenace/ keep
without having all file and structure like what we have in oracle
10g J developer on Mywork folder?
Help me ..please...
regards
erie

Erie,
if you are deploying to Oracle Application Server 10g (9.0.4) or higher, then you don't need to deploy the ADF runtime libraries because they are already there.
If you create a deployment profile for the application you want to deploy - e.g. a WAR file or EAR file deployment - then you can select the files you want to deploy. The default settings typically include all teh necessary files.
Frank

Patch for upgrading 10g AS from 10.1.2.0.2 to 10.1.2.1

Similar Messages

Maybe you are looking for