Patch Level B1

Which is the last Patch Level for SAP B1 ? PL 39?

Are you using SAP B1 cluster A or B ? the cluster A latest PL is 39 and B is 34.
Rgd,
Steve

Similar Messages

  • Error while updating patch level 11 of HR

    Dear All,
    I am getting following error while updating HR patch level 11.
    Phase OBJECTS_LOCKED_?: Objects Locked in Requests
    Request      Names of Locked Transport Objects
    MRDK900089   LIMU REPS H99_POST_PAYMENT
                 LIMU REPS RPCIPE00
    MRDK900542   R3TR FORM HR_IN_TAXF16000Y
    the above request is in other client, and it is a local request, which is not getting transported; i mean it does not allow to transport. give the following error.
    Object messages: R3TR CINS 01200615322 0000824666
    Transport objects from package PCPO to target MRP only
    Object messages: R3TR NOTE 0000970953
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG DATA_TOP_FILL_TEXT
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG PUT_PERNR_INFO
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU REPS H99_POST_PAYMENT
    Transport objects from package PCPO to target MRP only
    Please help me how to rectify.
    Thanks n regards
    Bhaskar

    Hello Bhaskar,
    is the transport already approved?
    If not approve it and try it again. (also it is a local one)
    If not check the objects and unlock them manually the following way:
    SE03 => Unlock Objects (Expert Tool)
    But if you approve your transport... the objects should be unlocked.
    Regards
    Stefan

  • Error: Current patch level of database is unknown. Use latest dbpatch build

    hi,
    I am applying EP6SP2 CM&COLL patch 5 DBPATCH.
    current portal version: version=6.0.2.29.0
    current C&COLL version: CM_COLL version=60 SP2 Patch 5
    Before applying this patch, i applied CM&COLL patch 4 hotfix 8 and the DBPATCH included in tht. Now, after applying CM&COLL patch 5, i tried to apply DBPATCH which comes with CMOLL patch5 SAR file. My database is oracle database. While applying this patch i encountred following error:
    <i>
    Current database version: SP2.CM.SPs
    ERROR: Error: Current patch level of database is unknown. Use the latest dbpatch build
    java.lang.Exception: Error: Current patch level of database is unknown. Use the latest dbp
    atch build.
            at com.sapportals.wcm.tool.dbpatch.Database.getPatchList(Database.java:48)
            at com.sapportals.wcm.tool.dbpatch.DBPatch.patch(DBPatch.java:66)
            at com.sapportals.wcm.tool.dbpatch.DBPatch.main(DBPatch.java:26)
    </i>
    Now according to SAP Note 761224, they asked us to use updated DBPATCH attached to this note. But currently there are only 3 files attached of MSSQL. I want the updated ORACLE_DBPATCH files.
    rgds,
    Nilz

    Hi,
    i m thru. i raised the question in OSS. They rectified the mistake and attached dbpatch_oracle.zip to SAP note 761224.
    rgds,
    Nilz

  • DB space history not updating in DB02 after upgrading to NW7 patch level 11

    We upgraded our NW04 system to NW7 patch level 11 and now when I go into DB02 and click on DB space history there is no new data since the upgrade.  SAP_Collector_For_PerfMonitor runs every hour without error.  I've checked st22 and there are no shortdumps and I can't find any timeout issues.  Ideas?

    You may need to a newer release of saposcol.  Saposcol comes with your kernel, if you haven't updated your kernel recently that could be a conflict with your saposcol.
    Lee

  • How to find out the IPS and DS Service Pack and patch levels in windows server.

    Hi,
    I have installed the Information Platform Services 4.0 and Data services 4.0 in windows QA system, now we need to install the same version of IPS & DS  in windows PRD system for this how could we find out the exact version of IPS & DS  ( Service pack and patch levels ) and where we can find the same.
    Many Thanks,
    Sudheer

    Hi Sudheer,
    On a Windows Operating Systems you can check the “Programs and Features” in control panel.You can see a list of both the Name and Version number of SAP BusinessObjects that is installed.
    option 2:
    Open CMC go to Settings. In the properties, you will find the Product Version.
    Please check below SAP notes for more information.
    http://service.sap.com/sap/support/notes/1602088
    Regards,
    Pavan

  • List of issues with patch level

    Is there a list of application errors reported for each patch level?
    When working with SAP R/3, there is a SAP note released for each patch level which states the changes delivered in that patch as well as what fixes are delivered. Therefore, it is easy to see what application errors exist in each patch level. Is there something similar for SAP Business One?

    There are also notes for those Lists of issues with each patch level for B1.  What is your B1 version and PL?
    Thanks,
    Gordon

  • What is the latest patch level for SAP CRM 7.0

    Hello Experts,
    I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is.  We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
    Thanks,
    VSK

    > I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is.  We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
    http://service.sap.com/patches
    --> SAP Application Components
    --> SAP CRM
    --> SAP CRM 7.0
    --> Entry by Component
    --> CRM Application Server ABAP
    --> SAP CRM ABAP 7.0
    --> Support Packages
    Scroll down and see the latest patches. If you click on the text you'll see the problems fixed.
    Support packages are by definition a collection of patches and fixes for problems, however, there may be small improvements in certain areas.
    Markus

  • How do I check if I need SAP GUI 7.10 Patch-Level 7?

    Hi,
    I have installed SAP GUI 7.10 client.
    After restarting the PC, I tried to install the Patch-Level 7 but I got the message:
    This SAP Front End Patch cannot be applied. Either this patch is already installed or the components to be patched are not yet installed at all.
    My version for the SAPGUI installer is 2008.0.0.187
    From Windows, I looked at the version for the installed file saplogon.exe, it is 7100.1.0.1027.
    Does anyone know if my SAPGUI would require Patch-Level 7?
    Thanks.
    HY

    Thanks for replying.
    This is my SAP logon info, do it looks alright?
    Release: 710 Final Release
    File Name: saplogon.exe
    File Version 7100.1.0.1027
    Build: 0
    Patch Level: 0
    These are my installed component. Could it be that none of the below components need to be patched?
    1. SAP GUI Suite
    2. R/3 Add-on
    3. General Add-on
    4. Legacy Components
    5. CRM Add-on
    Edited by: Han Yang Lee on Jul 9, 2008 4:39 PM

  • Abap and java patch level

    Hi,
    I have a portal installed on a standalone java based on sp13.  I also have a backend ECC5.0 on a web as abap (sp9).  If I want to connect the portal to the backend ecc, do I need to upgrade the abap to the same patch level as the standalone java (ie. sp13).
    Also, I have installed the portal via rapid installer, which has also created a new sld for me.  If I want to add the abap as a new technical system in the sld, is it required that both the java (of which the sld is based) and the abap be of the same patch level?  thanks!

    Hi,
    If you want to connect to the backend system , both the Portal and ECC (Back end System ) need not be of the same pacth level. And you can also add the techincal system in SLD of diffrent pacth levels.
    Thanks,
    Tanuj

  • Compatibility between MII with different patch levels.

    Hi all,
    I know that the best solution is to have the same MII patch level in MII development environment and in produztion enviroment.
    For many reasons that aren't  under my direct controli, we'll have an MII 12.0.5 in development and MII 12.0.8 in production.
    Are there any point to verify? Can we export from development environment and deploy to production without any changes?
    On the contrary, what about having the development environment at a higher patch level than production enviroment (e.g 12.0.8 in development and deploy the solution on a 12.0.5 prduction enviroment)?
    Thank in advance for your responses/experiences on this subject.
    Best wishes for a nice 2010

    Hi,
    If you transfer from lower patches to higher patches there will not be any problem as such.
    In the otherhand if you trying to export the project from higher to lower patch  there you have the problem. Becuase some bugs might have been fixed in the higher patch those are not avaialble in the lower. For example in some date function of BLS might have been fixed in updated patch,the same you copied then that particulr function will not work in the lower patch and the BLS will come with errors.
    Hope this helps you.
    -Suresh
    Edited by: Suresh Hiremath on Jan 7, 2010 12:11 PM

  • How to determine 640/J2EE Startup Framework Binary Patch Level?

    Hi All,
    We are running BI ABAP with Java Add-in on WAS 640/SUSE/Oracle.
    In the ABAP world, there are many options for determining the current kernel patch level.  Disp+work -v, SYSTEM->STATUS, etc..
    How do I determine the patch level of the J2EE startup framework (ie: jlaunch, jcontrol, etc..)?  If I run these commands with '-version', I get a patch level of 0. From System Information, the Cluster Kernel Version is 6.40 PatchLevel 105424.313. 
    What I am trying to determine is if I have the binaries that map to the latest applied SP (18).  Do I need to download J2EERTOS18.SAR and apply the bits or has that already been done?  Or is the current patch level for the bits fro the J2EERTOS14.SAR file?  Etc...
    Any tips/suggestions?
    Thanks much,
    Greg

    Hi
    You can check the patch number like this;
    D:\usr\sap\FT0\SYS\exe\uc\NTI386>jlaunch -version
    Failed to reserve 1610612736 (0x60000000) bytes before loading DLLs (error 8).
    jlaunch information
    kernel release                700
    kernel make variant           700_REL
    compiled on                   NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
    compilation mode              UNICODE
    compile time                  Jan 23 2008 20:42:28
    update level                  0
    patch number                  128                         <<< Here is the patch number>>
    source id                     0.144
    While regarding which file(s) to apply, please notice that the files you are not talking like
    J2EERTOS16_1, is part of the J2EE support package stack, which can be applied with JSPM.
    Regarding the kernel, you can alway refer to note 19466, and downlaod the lastest kernel from:
    http://service.sap.com/swdc
       Support Packages and Patches ->
       Entry by Application Group "
       SAP NetWeaver and complementary products"
       SAP NETWEAVER" SAP NETWEAVER 7.0"
       Entry by Component"
       Application Server Java
       ===> SAP KERNEL 7.00 64-BIT UNICODE
    Regards,
    Thunder

  • PI 7.1 upgrade - PI_BASIS patch level in ECC

    Hello
    We are looking at upgrading our XI 7.0 SP12 to PI 7.1. Our backend ECC system is at PI_BASIS SP11. Most of our interfaces with the backend are through ABAP proxies.
    Will an upgrade to PI 7.1 demand an upgrade to PI_BASIS in the backend ECC system as well?
    If not, what is the minimum SP level the PI_BASIS component in the backend ECC system should be at?
    I don't find this information in upgrade guide; where will this information be normally available?
    Thanks
    KK

    You can use PI 7.1 with any SAP system.
    However, if you want to use Abap proxies based on message interfaces of type "stateless" with WS-RM protocol, the ECC requires SP 14.
    The Abap proxies based on XI 3.0 protocol do not require any special patch level.
    Regards
    Stefan
    Edited by: Stefan Grube on Aug 28, 2008 4:34 PM

  • Kernel patch level

    hello,
    We have 3 system landscape DEV, QAS & PRD on HP-UX,  oracle 9.2, ECC 5.0.
    kerne patch level of DEV system is 196 and QAS system is 347 and PRD system's kernel patch level is 196
    can this is affect on request transporting DEV to QAS and PRD or any issues plz. guide me
    thanks

    Hi,
    No problems for tranports but you're not qualifying what will be running on production....
    The whole point of a quality system is to use exactly the same release, kernel patch levels and SP levels as the prodcution system.
    Regards,
    Olivier

  • How to send patch level program changes from concert level instruments?

    Heya,
    Here's the gist of my setup:
    I have two concert level external instrument channel strips (Nord Electro 3 and Prophet 8 module). I am attempting to change the bank on the Electro 3 on a per patch basis. It seems as if the concert level nature of the channel strip is overriding my ability to change on a per patch basis. I am sending out a program change on a certain patch, and it is being reflected in all of the other patches across the concert (this is expected behaviour from reading the manual).
    I've been looking for a way to manually send the program changes on a per patch basis (for these concert level strips), using some sort variation of the override parent setting, but I've been unsuccessful at finding a method for doing this. Is it even possible?
    The behaviour I'm looking to replicate is easily accomplished by manually creating the external instrument channel strip in each of the patches, and then sending out the appropriate program change message. This isn't a problem to do. It is, however, a tad bit cumbersome and sort of defeates the purpose (in my opinion) of having concert level channel strips.
    Any wisdom would be appreciated.
    Cheers,
    Nick

    As far as I know the only way to send program changes is to create channel strips in every patch. I don't use concert level channel strips for that reason.
    One of the advancements is that you can level your external instrument on patch level.
    Tip: create one patch with the channel strips you need and duplicate that one (CMD-D) to create new patches. Works faster for me.

  • How do I see the Kernel patch level in Java ONLY instance?

    Could someone please tell me How do I see the Kernel patch level in a Java ONLY instance?
    In Abap, it is simple!
    In Java I see in the System Info: Kernel Version:  7.00 PatchLevel 108458.44 
    BUT that doesn't correspond to the real patch level which I can see when I do disp+work which gave me 111

    Hello Yechezkel,
    I am not sure whether the patch number you are looking for is available.
    Typically you can use "-v" to display the patch level of SAP kernel programs. When I run "jcontrol -v" or "jlaunch -v", the patch number is blank (at least on the 6.40 release I checked)
    The SP level should be able to tell how current the Java instance is updated, especially for NetWeaver 7 systems always patched with JSPM stack.
    Best regards,
    Victor

  • Patch level for SAPGUI 7.10 in ECC 6.0

    Hi all,
    we are upgrading our ECC 6.0 SP 13 to SP18. Actually SAPGUI patch level is 4; is there a matrix compatibility or a link in order to check with patch level for SAPGUI is recomended.
    Thank's in advance.
    Best regards.
    Maurizio Ortolani

    Hi Maurizio Ortolani,
    https://websmp205.sap-ag.de/pam
    Regards
    Ashok Dalai

Maybe you are looking for