Patch level for Excel 2007 (Release 640)

Hi!!!
Do you know which patch level is necessary for the interaction between SAP and Excel 2007??
We have pach level 22 and when we try to download some ALV using the button "Microsoft Excel", SAP opens a page of Excel without information.
Thanks a lot!
Lluís i Montse

Hello
Check your macro settings in Excel 2007.
1)  Open Excel
2)  Click on the round office button at the top left of the window
3)  Click Excel Options at the bottom
4)  Choose Trust Center on the left
5)  Click the Trust Center Settings button
6)  Click Macro Settings on the left
7)  Choose "Disable all macros with notification"
8)  Click OK, then Click OK again
When you try your ALV again, it should ask you if you want to Enable the macro, click Enable then it should work.
Hope this works for you
Reid Maulsby

Similar Messages

  • Recommended Patch Level for ACS 4.2

    Hi,
    Is there a recommended patch level for ACS 4.2? I see a patch 4 and 5 can be downloaded. Any gotchas with either?
    thanks
    Bob

    Bob,
    I haven't had any issues with patch 5 for ACS 4.2. If you have any concerns please see the release notes for the patch.
    HTH,
    Mark

  • Kernel Patch Level for Linux RHEL 4

    Hi every one,
    Can any one pls tell me the latest Kernel patch level for OS Linux RHEL 4 .
    or ls tell me whr can i find it .
    Thanks,
    Praveen

    http://service.sap.com/patches
    --> Entry by Application Group
    --> Additional Components
    --> SAP Kernel
              o SAP KERNEL 32-BIT
              o SAP KERNEL 32-BIT UNICODE
              o SAP KERNEL 64-BIT
              o SAP KERNEL 64-BIT UNICODE
    Choose your platform here.
    SAP KERNEL 4.6D 32-BIT
    SAP KERNEL 4.6D_EXT 32-BIT
    SAP KERNEL 6.40 32-BIT
    SAP KERNEL 7.00 32-BIT
    Choose your release
    Download the independent and the database dependent part.
    Markus

  • Current Patch Set for Oracle Database Release 11.2

    Hi
    I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
    I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
    Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
    I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
    or
    I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

    Abu Al MAmun,
    I understand from your posts that you recently upgraded to 11.2.0.2.
    I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
    Thanks,
    Siri
    Hello Everyone,
    I did read the post on to how you have to install the current patch set for 11.2.
    But honestly, it pretty much flew over my head.
    I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
    And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
    This is what I have right now:
    1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
    2) Database Patches -->Oracle 11.2.0.2 -->
    All they have here is
    a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
    b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
    c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
    If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
    But I did not find the currrent patch set 11.2.0.2.
    Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
    Thank You!
    Siri

  • Patch level for SAPGUI 7.10 in ECC 6.0

    Hi all,
    we are upgrading our ECC 6.0 SP 13 to SP18. Actually SAPGUI patch level is 4; is there a matrix compatibility or a link in order to check with patch level for SAPGUI is recomended.
    Thank's in advance.
    Best regards.
    Maurizio Ortolani

    Hi Maurizio Ortolani,
    https://websmp205.sap-ag.de/pam
    Regards
    Ashok Dalai

  • Does anyone know how to hide the export option for excel 2007

    Does anyone know how to hide the export option for excel 2007?
    We are having an issue with negative numbers downloading as text field in excel 2007, works fine in excel 2003.
    We are on version 11.1.1.7.0 of OBIEE.
    Thanks for any response.

    Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup

  • R/3 Patch level  for SAP BW 3.5

    I all could you send me information about the minimum sap r/3 patch level for BW 3.5?
    thanks a lot...

    Hi,
    You would find the info on http://service.sap.com/instguides based on the OS and the database.
    Bye
    Dinesh

  • Assign patch levels for component versions of system: Maintenance Optimizer

    Hello,
    I am trying to have Maintenance Optimizer check for what files I need to download.  However, I get the following error:
    Assign patch levels for component versions of system SXM.
    I susepect that the problem really lies in the fact that the "SP Levels" in the "Software Components" tab is not populated in SMSY.
    Does something read that information from the child system and populate the data automatically?  This is a new system install, and perhaps a step was missed in solman.
    Thanks,
    John

    Hi John,
    MOPZ directs you to SAP Software Download Center in order to show you the lastest status and available packages.
    If you are not seeing the packages perhaps you created you satellite system at solution manager pointing to the wrong product/version.
    MOPZ is created to point you to the available Support Package Stacks for its products.
    Normally one creates a system in solution manager defining it as an ECC server ( this does not have a download page for MOPZ ) when the correct assignment would be SAP ERP ( this last has a download page for MOPZ ).
    If this is your case, you´ll need to redefine the satellite system again in our solution manager.
    hope this helps.
    Valdecir

  • Error running XL Reporter: 'a required COM add-in program..' for Excel 2007

    I have 2 users running Excel 2007 that can't run XL reporter.  They get the message 'a required COM add-in program for XL Reporter has not been loaded'.  I have instructions for Excel 2003, but not for 2007.  Does anyone know how to resolve this for Excel 2007?

    Gordon,
    I have instructions to get the IXXLReporter.dll file in the installation area, but 2007 has completely different layout. I can't find where to go???  Can you please give me the procedure?
    Edited by: Pat Frohlich on Apr 1, 2009 10:12 AM

  • Which TDM Addin for Excel 2007?

    I downloaded what I think is the latest TDM add-in for excel 2007.  When I go to open my file a message comes up saying that my file has more than 65000 rows.  I know the limitation is not in excel 2007.  Will the add-in only load 65000 rows of data? 

    Frank,
    So the installation of the addin went smoothly?  You did not have to add it in manually like in this KB?
    http://zone.ni.com/devzone/cda/tut/p/id/5885
    You may want to check the specs on the trial version of excel 2007 that you have.  Did you get this from the web?  I don't know if Microsoft would do this, but sometimes the trial software won't have all of the features of the full version.  I just installed the addin on my machine with full version of excel 2007 and was able to open a TDM file with a million random numbers stored in it. 
    A good way to test this would be to just create a spreadsheet file with 100,000 numbers in it, then try to open that in excel just to see if it throws the same error.  That would eliminate the possibility of the addin being to blame.  If the file opens without error, then you may want to check that the addin was installed correctly by referencing the KB linked above.
    Have a great day.
    Brian Coalson
    Software Engineer
    National Instruments

  • Which is the stable patch level for 2005-B after PL 25.

    Which is the stable patch level for 2005-B for SDK Customization purpose.
    Previously PL 25 is stable. As now PL 41 is already in market.
    Anybody knows?
    regards:
    Sandy

    Hi,
    SAP Business One 2005 B (7.40.252)  SP: 00  PL: 38
    I think the above patch was stable after PL.:25
    Raja.S

  • How to find out SAP J2EE Patch Level for 04s

    Hi all
    I want to find out SAP J2EE Patch Level for 2004s installation i tried to get information from SYSTEM INFORMATION link on WAS homepage but it gave only version :7.00 details and PATCH LEVEL was not mentioned .
    I also tried to find out by looking into VERSION.TXT file for server & dispatcher in ....USR\SAP\J2E.....engine installation but again no details about PatchLevel was mentioned can anyone provide some information regarding what is the  PatchLevel  for WAS 7.0 , J2SE used is 1.4.2_09
    Thanks in Advance !!
    Asif

    Thanks Kenny ,
    But as you can see from version.txt  file for Server0 it does not mention PatchLevel it is
    blank
    Specifies the version of the system
    Cluster-Version: 7.00   PatchLevel 
    Build-On:Thursday, March 23, 2006 18:47 GMT
    Perforce-Server:
    Project-Dir:JKernel/645_VAL_REL
    JKernel Change-List:102557
    Build machine:SAPInternal
    Build java version:1.3.1_12-b03 Sun Microsystems Inc.
    SP-Number: 07
    Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
    i also checked version.txt for dispatcher it is as below
    Specifies the version of the system
    Cluster-Version: 7.00   PatchLevel 
    Build-On:Thursday, March 23, 2006 18:47 GMT
    Perforce-Server:
    Project-Dir:JKernel/645_VAL_REL
    JKernel Change-List:102557
    Build machine:SAPInternal
    Build java version:1.3.1_12-b03 Sun Microsystems Inc.
    SP-Number: 07
    Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
    I tried this on different 2004s server but the Patch Level is not mentioned whereas for 2004
    servers it is mentioned
    so can u give some inference based on above descriptions about What should be SAP J2EE Patch
    Level for the 2004s servers
    Regards !!
    Asif

  • What is latest bundle patch level for exadata x3-2 machine? how to find the doc?

    We have a exadata x3-2 machine. I have a question: What is latest bundle patch level for exadata x3-2 machine? how to find the doc?
    Thanks in advance.

    Check note id 888828.1
    This has all the infomation you need.

  • What is HR new Patch level for SAP 4.7

    Hi all,
    What is the HR new Patch level for SAP 4.7 and GUI 6.4.
    Thanks In advance.
    Satish

    Hi Satish,
    The best and the most authorplace to find that information would be the SAP service Marketplace. Go to <a href="https://service.sap.com/ocs-schedules">this link</a> and you should get it.
    Regards,
    Anand Mandalika.

  • SAP_BASIS Latest patch level for release level 058

    Hi,
    I have sap_basis, release level 620 and patch level of 058 in my system.
    What is the latest number of patch level available for the same realease level as mentioned of sap_basis ?
    Where can I go and get the information about the latest patches ?
    Regards,
    Thomas.

    IMHO you should look in <a href="http://service.sap.com">SAP Marketplace</a>
    Greetings,
    Blag.

Maybe you are looking for

  • PS report: multible selection for report selection criteria

    Is there a possibility to define multible selections in the report selection variables of a PS hierarchy report? I tried to define them via CJE6 -> EDIT -> General data selction and entered valiables in the FROM column and the TO column. But when I e

  • Deadlock detected...without any info after"Information on the OTHER waiting

    i got ORA-00060: Deadlock detected. My trace file is as the follow: Current SQL statement for this session: UPDATE APPLSYS.FND_FORMULA_PARAMETERS SET PARAM_NAME_FRPAR = :B5 , DESC_PARAM_FRPAR = :B4 , TYPE_FRPAR = :B3 , INOUT_FRPAR = :B2 WHERE FRML_FR

  • How to get Inventory -Finished Goods Values Plant wise

    Hi, Client is asking a Balance sheet. In that Balance Sheet, he wants plant wise break up for Inventory Finished Goods GL Account. For Example: Inventory finished goods  - Plant 1100 = 120000 Inventory finished goods  - Plant 1900 = 110000 How can we

  • How to create a button next to other button(s)

    I have 4 buttons and my current view is one button on top of another. I looked through the button positions(and tried a couple) but none seems to put buttons in one row instead of one row per button. What settings do i need to set to achieve somethin

  • T61, T60 - BSOD for Intel WiFi cards, Middleton BIOS, & Win 8.1 & 10

    This is an "all-in-one" post. Recently, my trusty T61p started getting Blue Screens of Death (BSOD) with the following message: DRIVER_IRQL_NOT_LESS_OR_EQAL in sysnetwlv64.sys This has been frequently reported as a complication of Windows 8.1 (only)