Patch level for SAPGUI 7.10 in ECC 6.0
Hi all,
we are upgrading our ECC 6.0 SP 13 to SP18. Actually SAPGUI patch level is 4; is there a matrix compatibility or a link in order to check with patch level for SAPGUI is recomended.
Thank's in advance.
Best regards.
Maurizio Ortolani
Hi Maurizio Ortolani,
https://websmp205.sap-ag.de/pam
Regards
Ashok Dalai
Similar Messages
-
Assign patch levels for component versions of system: Maintenance Optimizer
Hello,
I am trying to have Maintenance Optimizer check for what files I need to download. However, I get the following error:
Assign patch levels for component versions of system SXM.
I susepect that the problem really lies in the fact that the "SP Levels" in the "Software Components" tab is not populated in SMSY.
Does something read that information from the child system and populate the data automatically? This is a new system install, and perhaps a step was missed in solman.
Thanks,
JohnHi John,
MOPZ directs you to SAP Software Download Center in order to show you the lastest status and available packages.
If you are not seeing the packages perhaps you created you satellite system at solution manager pointing to the wrong product/version.
MOPZ is created to point you to the available Support Package Stacks for its products.
Normally one creates a system in solution manager defining it as an ECC server ( this does not have a download page for MOPZ ) when the correct assignment would be SAP ERP ( this last has a download page for MOPZ ).
If this is your case, you´ll need to redefine the satellite system again in our solution manager.
hope this helps.
Valdecir -
R/3 Patch level for SAP BW 3.5
I all could you send me information about the minimum sap r/3 patch level for BW 3.5?
thanks a lot...Hi,
You would find the info on http://service.sap.com/instguides based on the OS and the database.
Bye
Dinesh -
Recommended Patch Level for ACS 4.2
Hi,
Is there a recommended patch level for ACS 4.2? I see a patch 4 and 5 can be downloaded. Any gotchas with either?
thanks
BobBob,
I haven't had any issues with patch 5 for ACS 4.2. If you have any concerns please see the release notes for the patch.
HTH,
Mark -
Which is the stable patch level for 2005-B after PL 25.
Which is the stable patch level for 2005-B for SDK Customization purpose.
Previously PL 25 is stable. As now PL 41 is already in market.
Anybody knows?
regards:
SandyHi,
SAP Business One 2005 B (7.40.252) SP: 00 PL: 38
I think the above patch was stable after PL.:25
Raja.S -
Kernel Patch Level for Linux RHEL 4
Hi every one,
Can any one pls tell me the latest Kernel patch level for OS Linux RHEL 4 .
or ls tell me whr can i find it .
Thanks,
Praveenhttp://service.sap.com/patches
--> Entry by Application Group
--> Additional Components
--> SAP Kernel
o SAP KERNEL 32-BIT
o SAP KERNEL 32-BIT UNICODE
o SAP KERNEL 64-BIT
o SAP KERNEL 64-BIT UNICODE
Choose your platform here.
SAP KERNEL 4.6D 32-BIT
SAP KERNEL 4.6D_EXT 32-BIT
SAP KERNEL 6.40 32-BIT
SAP KERNEL 7.00 32-BIT
Choose your release
Download the independent and the database dependent part.
Markus -
How to find out SAP J2EE Patch Level for 04s
Hi all
I want to find out SAP J2EE Patch Level for 2004s installation i tried to get information from SYSTEM INFORMATION link on WAS homepage but it gave only version :7.00 details and PATCH LEVEL was not mentioned .
I also tried to find out by looking into VERSION.TXT file for server & dispatcher in ....USR\SAP\J2E.....engine installation but again no details about PatchLevel was mentioned can anyone provide some information regarding what is the PatchLevel for WAS 7.0 , J2SE used is 1.4.2_09
Thanks in Advance !!
AsifThanks Kenny ,
But as you can see from version.txt file for Server0 it does not mention PatchLevel it is
blank
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
i also checked version.txt for dispatcher it is as below
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
I tried this on different 2004s server but the Patch Level is not mentioned whereas for 2004
servers it is mentioned
so can u give some inference based on above descriptions about What should be SAP J2EE Patch
Level for the 2004s servers
Regards !!
Asif -
What is latest bundle patch level for exadata x3-2 machine? how to find the doc?
We have a exadata x3-2 machine. I have a question: What is latest bundle patch level for exadata x3-2 machine? how to find the doc?
Thanks in advance.Check note id 888828.1
This has all the infomation you need. -
What is HR new Patch level for SAP 4.7
Hi all,
What is the HR new Patch level for SAP 4.7 and GUI 6.4.
Thanks In advance.
SatishHi Satish,
The best and the most authorplace to find that information would be the SAP service Marketplace. Go to <a href="https://service.sap.com/ocs-schedules">this link</a> and you should get it.
Regards,
Anand Mandalika. -
Upgradation Minimum sp level & kernel level for SAP 4.7 to ECC 6.0
Hi,
We recently created a test box , copy of devolopment.
We are running on SAP 4.7 with sap_basis and sap_abap with sp level 46.
SAP 4.7 with kernel release 640 and kernel patch version 155.
Oracle 9i.
What is minimum support pack level and kernel patch level required to upgrade from sap 4.7 to ecc 6.0.
As per threads it looks like kernel patch version should be 175.
Can any one guide me with sap note which provides the info of minimum sp level and kerenl patch level.The source system requires a certain support package level (that is described in the upgrade guides) because the tools that to the import require them.
So the easiest way is to check the upgrade guides and the mentioned notes which is the minimum support package level for the source system to start the upgrade.
The target level must be at least equivalent or higher.
Markus -
Applying BW 3.50 patch 3 for sapgui 7.10 to a installation server
Hi All
Im applying a few patches to a 7.10 installation server, everything works fine , except for when applying the BW 3.50 patch 3 for 7.10 GUI to the server .. well applying the patch actually works , but afterwards instead of having only 2 products to choose from on the first hierarchy level (Business Explorer and SAP GUI for Windows 7.10), there is suddenly 6 products instead (SAPGUI for windows 7.10, Engineering client viewer, bw 3.5 addon, kw addon, tweak gui and business explorer).
The real question is .. before applying the patches, I had a package called "complete" which included both available products, after applying 3.50 bw patch, the original package still contains the same two products, but is that adequate ?? or should a new package be created that includes ALL products available after the patch ?
Or .... is the original package completely patched ??
I have never before seen a patch apply additional products to the installation server ....
/KimHi Kim Sonny,
nice to hear from you ....
Ok, please check the note
#1131768 and
#1155445 !
I recommend you to set up a new installation server with the new compilation 3 CD of
sapgui 710 ! And for this please look into the note #1266552
Best Regards,
Sven
from primary support gsc austria .... -
What is the latest patch level for SAP CRM 7.0
Hello Experts,
I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is. We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
Thanks,
VSK> I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is. We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
http://service.sap.com/patches
--> SAP Application Components
--> SAP CRM
--> SAP CRM 7.0
--> Entry by Component
--> CRM Application Server ABAP
--> SAP CRM ABAP 7.0
--> Support Packages
Scroll down and see the latest patches. If you click on the text you'll see the problems fixed.
Support packages are by definition a collection of patches and fixes for problems, however, there may be small improvements in certain areas.
Markus -
Version Numbers Vs. Patch Levels For Web Tools
I have noticed that version numbers for Web Tools such as 620, 621, 622, 624, 625, 627, and 628 correspond somehow to the patch level (6, 8, 10, etc.). What is the difference between the version numbers and patch levels, and which ones match up with which?
Hi Michael,
Prior to p10, the last digit of the version corresponds to the patch level.
From p10 going forward, the last set of digits represents the patch.
Patch 10 is 2007.0.630.10
Patch 11 will be 2007.0.631.11
The version will only change if there are upgrade scripts that need to run for the patch. -
Bex Patch level for Windows 7 and SAP GUI 710
Hi,
We have the machine with following config:
O.S - Windows 7
SAP GUI - 710
MS Office 2007
When a user logs into Bex Analayzer, clicks on Add-ins he gets an error message in German.
Same kind of problem was encountered with Office 2003, but MS fix 907417 solved the problem.
But i am not able to find any such fix for Office 2007.
Can anyone tell me what should be the patch level of Bex in this case?Hi,
What is the exact error message you are getting?
Thanks
Riyez -
Patch levels for Oracle and kernel
Hi everyone,
Can you pls tell what are the maximum and minimum patch levels that can be used for BW 3.5 installation on LINUX RHEL 4 ,
oracle -10.2.0.2 & kernel - 6.4 .
Thanks in advance,
Praveenhi people,
we have checked for the status of support package in Transaction SPAM traffic signal is still red and in the Phase RUN_SPAU_? it is stuck and even after restarting import it shows clean-up phase is left and it ends with same error mention above
the support package name is SAPKB70014 size is 116266 MB now after restarting the Import the following error message comes
The import was stopped, since an error occurred during the phase RUN_SPAU_?,
which the Support Package Manager is unable to resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: RUN_SPAU_?
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0255
- Error message: Could not connect to semaphore server
we run all the phase in background, and even after entering the support package number in transaction SPAU there it is showing
"No objects within selected filter parameteres"
Q.1 Any idea what went wrong and how to fix that?
Q.2 Is there any problem if we run the all four phases of support package in background or it should be run in dialog
latest tp & R3trans updated?
Maybe you are looking for
-
Hello guys, just question for you. I think that soon I'll go get myself a new iPod and still can not decide between the iPod touch 64 gigs and the Classic. I am looking for a device where I can store all my music and has a good battery life. Now the
-
Problem downloading some movies & videos into New 60G Video Ipod
Our 60G seems to have a problem with some of the videos and movies. It has downloaded many videos fine, but some has been downloaded without sound. Everything plays in itunes fine though. Help?
-
CS3 slicing behavior not like FW8
I just upgraded to CS3, and slicing is not behaving as it did in FW 8. I have a simple image, which I cut up into three slices. The slices do not overlap, although they are arranged on the page so that the slicing guides would overlap if they extende
-
Advance Table in advance table via view link
Hi All, I have implemented advance table in advance table to show details region data by creating View Link between master and child View Object. I have followed all the steps mention in following link http://oracleanil.blogspot.com/2010/06/advanced-
-
Speed of processor is being limited by system firmware after BIOS update
Hello, I have updated the BIOS of my G510 to the latest version, which is 3.09. But after this update, I have noticed "The speed of processor is being limited by system firmware" entries at the Windows System event log. They are like that: "The speed