Patch level (Pls advise)

Hi Gys,
What patch level should one be currently if there were to say they are updated. W e are currently on this one: 10.2.0.1.0
Thanx.

Depends upon your platform. On the read me file of the patch it will clearly mentioned. You will find something like this on the read me file.
Oracle home
- Oracle Database 10g (10.2.0.1) or later
- Oracle Database 10g (10.2.0.2) or later
Go to the system requirements section.
Regards
Asif Kabir

Similar Messages

Finding patch level of R/3

Where i can see the patch level of R/3 when i go to system--> status click on component information then i can see list of components like SAP_BAsis,sap_hr,sap_Ap etc etc
which of these component is my R/3 component
all these components have different patch levels
pls let me know

Maya,
you can also get the same from TCode SPAm and components / package levels.. in R/3 you have to execute the same and see the patch level of the R/3 Plug in...
Arun
Hope it helps..

BI Content patch level on BI system and source system

Hi all, hope you can help
our BI and ECC6 systems are separated. My question is, do we need to be on the same BI_CONT patch level in BI and ECC6? Our current patch level in BI is 7.0.3 level 9 and in ECC6 we have not loaded any patches, however we have BI content which was delivered with the install.
Regards
Charl

Plan on applying the Linux and Solaris versions of all applications patches to the respective servers.
How To Apply a Patch in a Multi-Server Environment
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136342.1
Patches must always be applied in their entirety. If you apply a patch to update
your filesystem, you must also apply the corresponding database and generation
portions of the patch if they are included. When updating the filesystem in a
multi-server environment, you should apply the patch on all servers.
You can see what patches have been applied to which nodes in OAM on the Applied Patches page. Oracle will not advise you to have patch differences, otherwise supportability comes into question due to partial patch application.

Diff Patch Level on External web and Source Server

Hi ,
Version - 11.5.10.2
We recently setup our external web server in DMZ on Linux while our source system
is running on Solaris.
We followed 238276.1 doc to migration the middle tier to linux. We were asked to check
both systems should have same Patch level.
I have doubts here
o Since we have only one DB Tier, and we copied APPL_TOP from Source solaris and
convert the files to linux. we installed IAS and 8.0.6 home from Universal installer
Is it possible to have diff patch level on both instances. as we have only DbTier
and the only way [ I know ] to check whether we have patch applied or not is
query to database or using OAM as it would show the same patch.
o if there is possibility to have diff. patch level then how can we detect this and what is the way to apply patches on one server [ Adadmin ? ]
o Can you please point me to any DOC which can give clarity how diff. type of patches
we can have in Apps.
Regards,
Jagjeet Singh

Plan on applying the Linux and Solaris versions of all applications patches to the respective servers.
How To Apply a Patch in a Multi-Server Environment
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136342.1
Patches must always be applied in their entirety. If you apply a patch to update
your filesystem, you must also apply the corresponding database and generation
portions of the patch if they are included. When updating the filesystem in a
multi-server environment, you should apply the patch on all servers.
You can see what patches have been applied to which nodes in OAM on the Applied Patches page. Oracle will not advise you to have patch differences, otherwise supportability comes into question due to partial patch application.

How to see list of bugs to be fixed in future patch level?

It occurs often that the client needs to upgrade due to one application error, but after upgrading they discover more application errors in the latest patch.
How to see SAP notes for bugs to be fixed in future patch level for CA or US localization only?
This is the scenario: Client was upgraded to 8.8 SP0 PL11 and they discovered a bug (SAP note 1475645). SAP note 1475645 was released on 04.06.10 when the upgrade was in testing. SAP intends to fix it in a future patch, therefore it is not included yet in any info file. It was not found in testing and unfortunately the client found this bug in the live upgraded database.
It would have been good if before upgrading the live database I could have found this note and advised the client of the workaround.
I tried the notes search but this returns 821 notes.
If I search #8.8 program error# or #8.8 application error# I do not find all relevant notes. The reason is that the writing of the notes is not consistent - Note 1475645 does not contain #8.8#.
If I search using category - program error, search for: SAP intends to provide a patch
and search method: phrase, I get 821 notes.
They are in order of last change date which is good but still, this doesn't work because a clean up is required e.g...Note 1477578 still says "SAP intends to provide patches' even though the patch has been released already (PL12) and I have already reviewed the info file.
It would be very helpful for both support and upgrades if the SAP notes search can be improved:
- refine search by version i.e....2007 or 8.8
- refine search by localization i.e...those country specific could be filtered out.
- refine to date range i.e...last change date
- clean up text on note when patch fix is released
- write notes consistently so that same search method can be used
Alternatively, please provide the info file for planned future patches. That way I can check what application errors are not fixed and exist in the patch I am upgrading to.

Hello Maeve and Archie,
I have gone through your posts in this thread and I would like to give you some insight into what we as SAP are doing to improve in the above mentioned areas.
First of all we are continuously improving the testing on patches that we release to the market, to ensure that we are not introducing any new defects into the product. However as you have mentioned, even through the rigorous testing process that we have at place, the fix in one place might touch the functionality in other place and go to the market unnoticed.
To make sure this does not happen we are continuously monitoring all such cases and following up on them. This iterative process has ensured that there is a minimum of problems that are released to the market.
In addition our policy for patch content makes sure that the cases that were identified in the market are fixed in the first available patch.
For details on our Quality assurance you can view the session "Understanding SAP Quality Assurance" delivered by Jaroslav Brutenic our QA team leader. It can be found in the Development tab of the[ PKOM 2010 page|https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705765&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&_OBJECT=011000358700000101242010E].
In regards to the Note search for solutions delivered via patch, the methodology that we use is the following:
1. product defect is identified and scheduled to a future patch in our internal systems.
2. note is created that describes the defect and the solution that will be delivered via patch
3. once the patch containing the fix is delivered onto service market place the note is attached to the "Patch overview Note" with the name of the patch.
Therefore the notes that do not have the overview note attached are the ones that are already identified but not yet delivered in a patch.
Lastly, we are currently working on improving the patch info file to provide a better overview of the defects that were fixed in the current and previous patches. Please let me know in case you are interested in reviewing and providing feedback, I will e-mail you the file.
In case you have any additional questions please let me know.
Best Regards
Martin Han
Global Development Support Lead
SAP Business One Global IBD

List of features of new Patch level

Hello experts,
Can you advise how to find list of features of new patch level, would be great if someone shares the link.
Attached is one such sample. I am looking for features of PL 5 and 6 of 9.1
Thanks
Deepak

Hi both,
besides these info files or the corresponding overview notes which comes with every patch delivery, I just can recommend to check the Top Fixes document, highlighting the most important corrections which are being delivered in patches:
SAP Business One 9.1 Top Fixes on SAP PartnerEdge; SAP Business One 9.1 on Customer Portal
SAP Business One 9.0 Top Fixes on SAP PartnerEdge; SAP Business One 9.0 on Customer Portal
SAP Business One 8.82 Top Fixes on SAP PartnerEdge; SAP Business One 8.82 on Customer Portal
hope this helps,
Peter

How and where to check Patch level in XI

Hi,
Can any one let me know how and where to check Patch level for XI systems.
Ex: 14SAPXIAFC17P_14.sca
Also pls provide me with the procedure for applying above patch.
Shavali

Hi Shavali -
http://<host>:<j2ee_http_port>/sap/monitoring/ComponentInfo
also
http://<host>:<j2ee_http_port>/sap/monitoring/SystemInfo for core system info (J2EE or JVM patch level, etc.)
BTW, you need <i>SAP_J2EE_ADMIN</i> role for this.
Regards,
Jin

Minimum patch level to be installed in 4.6 & ECC 6.0

Hi Experts,
Can anybody tell me what are the minimum patches or patch level to be installed while installing 4.6c and ECC 6.0?
Valuable answers will be rewarded.
Thanks in advance,
Suba

Hi,
   I am trying to find the 46D_EXT kernel but i am unable to find the same.The 46D_EXT kernel is not available under archives.
   The purpose for which i required the kernel is that i am upgrading a 4.6C, oracle 8.0.6.1, win NT system to ERP 2006. I want to do a system copy of the source system onto a hardware running windows 2003. This can only be done if i have the 4.6D_EXT as per the message above.
   Is there a better approach? According to my approach i will do a system copy onto a windows 2003 system --> upgrade oracle to oracle 10g ( using all the steps like first upgrade to oracle 8.1.7 then to oracle 9.2.6 then to oracle 10g) then i will proceed to upgrade the system to ERP 2006.
   Please advise.
Regards
Ankan Majumdar

What is a patch level in supporting package?

hai pals,
can u pls help me out know , what is an patch level in supporting packages ?.
right answers will be appreciated.
with regards,
raj

Hi Raj,
A Support package is a collection of corrections for an SAP product and the level specifies the version of an SAP system with regard to the Support Packages that have previously been imported.
Bye
Dinesh

Patch Level Updation

Hi Friends,
Due to some emergency we are updating patch level in development server from level 9 to level24 . After making changes in development if some changes done to PI objects & transport is done to production will that effect in Production.. (as production is at level9).
Any inputs pls..??
Regards,
Vinod.

Depends on the kind of objects.
If its a Adapter, then there will definetely be a impact as it uses the MetaData from SAP BASIS SWCV which has the corresponding Patch Level associated with it.
In case of mapping objects, it may work without any issues but the recommendation is that patch upgrades throughout landscapes be done with minimum transports.
Will let someone confirm the same as well
Regards
Bhavesh

How to update patch level?

Hi,
How to update patch level from 144 to 145?
Please advise!
Thanks
Duypm

You already have a thread opened for that.
No interview questions
No research done
No double posting
Read the "Rules of Engagement"
Regards
Juan

Patch levels for Oracle and kernel

Hi everyone,
Can you pls tell what are the maximum and minimum patch levels that can be used for BW 3.5 installation on LINUX RHEL 4 ,
oracle -10.2.0.2 & kernel - 6.4 .
Thanks in advance,
Praveen

hi people,
we have checked for the status of support package in Transaction SPAM traffic signal is still red and in the Phase RUN_SPAU_? it is stuck and even after restarting import it shows clean-up phase is left and it ends with same error mention above
the support package name is SAPKB70014 size is 116266 MB now after restarting the Import the following error message comes
The import was stopped, since an error occurred during the phase RUN_SPAU_?,
which the Support Package Manager is unable to resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: RUN_SPAU_?
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0255
- Error message: Could not connect to semaphore server
we run all the phase in background, and even after entering the support package number in transaction SPAU there it is showing
"No objects within selected filter parameteres"
Q.1 Any idea what went wrong and how to fix that?
Q.2 Is there any problem if we run the all four phases of support package in background or it should be run in dialog
latest tp & R3trans updated?

Kernel Patch Level for Linux RHEL 4

Hi every one,
Can any one pls tell me the latest Kernel patch level for OS Linux RHEL 4 .
or ls tell me whr can i find it .
Thanks,
Praveen

http://service.sap.com/patches
--> Entry by Application Group
--> Additional Components
--> SAP Kernel
          o SAP KERNEL 32-BIT
          o SAP KERNEL 32-BIT UNICODE
          o SAP KERNEL 64-BIT
          o SAP KERNEL 64-BIT UNICODE
Choose your platform here.
SAP KERNEL 4.6D 32-BIT
SAP KERNEL 4.6D_EXT 32-BIT
SAP KERNEL 6.40 32-BIT
SAP KERNEL 7.00 32-BIT
Choose your release
Download the independent and the database dependent part.
Markus

Incorrect kernel patch level

Dear Experts,
I just upgraded kernel patch level to the latest one, i.e. 254, however the EWA report still read the old patch level (Your SAP kernel release (release 700, patch level 254) is not up-to-date).
Do we have to upgrade the ST_PI and/or PI_BASIS, the status is as follow:
SOLMAN:
PI_BASIS    2006_1_700   0008   SAPKIPYM08
ST-PI           2008_1_700 0000
Satellite:
PI_BASIS    2005_1_700 0010   SAPKIPYJ7A
ST-PI           2008_1_700 0000
Please advise.
Thank and Regards,
Rudi

Hi,
This "outdated check" is based on the compiling date of the
'disp+work package' of the kernel. The rules for how many days mean
outdated depend on the kernel release and the ST-SER Release and SP
running on the Solution Manager.
Please find below some corrections that extent the rules for beeing
up-to-date:
1076235 - RED Rating in Software Configuration, Kernel 700 old
1301137 - ST-SER 2008_2 SP02: Further Corrections
1304151 - Service Assistent: Adjustments for Kernel Check
You may want to have the latest ST-SER version in order
to ensure that the latest corrections are implemented in your system.
Hope this helps.
Cheers
SH

SAP GUI 7.10 patch level 3 installation issuee

Dear All,
I tied to install SAP GUI 7.10 patch level 3 in windows 2000 OS
Please help me in Installing the SAP GUI 7.10 in windows
Thanks

Hi,
Pls check service.sap.com/sapgui
Eddy
PS. Reward useful answers and earn points yourself

Patch level (Pls advise)

Similar Messages

Maybe you are looking for