Patch levels in 4.6c version

Hi all,
What is the patch level supported by 4.6c Version ?
Thanks,
Narasimha.

Hi,
I hope the below link will help you.
Recommended latest kernel patch level for R/3 4.6C on UNIX at HP-UX 64
Thanks,
Khushboo.

Similar Messages

Where is the information about "Patch Level" of a particular version

Hi all,
Where I can see what is the latest "Patch level" of a particular version of tuxedo. For example, what is the latest patch level of tuxedo 9.1, where I can find it out?. This information is public ? We need a oracle contacts?
thanks in advanced

MBriz,
The number at the start of last line in $TUXDIR/udataobj/patchlev is the Tuxedo patch level. (If there is no $TUXDIR/udataobj/patchlev file, then you are running the General Availability version of Tuxedo.)
This information is also available by executing "tmadmin -v".
A third way to get the information is to look at the first line printed by the BBL in the userlog on a particular day, which will be something like "09-30-2010: Tuxedo Version 10.3.0.0, 32-bit, Patch Level 041". (Other processes' first ULOG message of the day will indicate the Tuxedo Version, but will not include the patch level.)
Regards,
Ed

Headstart patch level vs. Repository version

What is the highest version(patch level) of Headstart that we can go to without changing our Repository version? We are currently at Repository version 4.0.12.80.6.

Hi Randy,
No not really, but as patch level 20 is the highest on sapgui 6.40, i would guess that it is a 6.20 gui...
On the other hand highest patchlevel on 6.20 gui is 64, so it is a really old installation....
You should ask them to click on the icon in the upper left corner of the saplogon / saplgpad screen and then select "About SAP Logon", a window will tell the sapgui version and patchlevel...
Regards
Rolf

Version Numbers Vs. Patch Levels For Web Tools

I have noticed that version numbers for Web Tools such as 620, 621, 622, 624, 625, 627, and 628 correspond somehow to the patch level (6, 8, 10, etc.). What is the difference between the version numbers and patch levels, and which ones match up with which?

Hi Michael,
Prior to p10, the last digit of the version corresponds to the patch level.
From p10 going forward, the last set of digits represents the patch.
Patch 10 is 2007.0.630.10
Patch 11 will be 2007.0.631.11
The version will only change if there are upgrade scripts that need to run for the patch.

Assign patch levels for component versions of system: Maintenance Optimizer

Hello,
I am trying to have Maintenance Optimizer check for what files I need to download. However, I get the following error:
Assign patch levels for component versions of system SXM.
I susepect that the problem really lies in the fact that the "SP Levels" in the "Software Components" tab is not populated in SMSY.
Does something read that information from the child system and populate the data automatically? This is a new system install, and perhaps a step was missed in solman.
Thanks,
John

Hi John,
MOPZ directs you to SAP Software Download Center in order to show you the lastest status and available packages.
If you are not seeing the packages perhaps you created you satellite system at solution manager pointing to the wrong product/version.
MOPZ is created to point you to the available Support Package Stacks for its products.
Normally one creates a system in solution manager defining it as an ECC server ( this does not have a download page for MOPZ ) when the correct assignment would be SAP ERP ( this last has a download page for MOPZ ).
If this is your case, you´ll need to redefine the satellite system again in our solution manager.
hope this helps.
Valdecir

Country India Version Patch level 5 to 11

Hi,
We are having Global template and operating in many countries. Currently we are planning for Rollout to India,
We want to know the Country India Version patch level 5 to 11 difference. Mean to say the major improvement/development changes in above patches. Your valuable information helps us in for further activities.
Looking forward for your valuable information.
Thanks & Regards
Prabhakar

Hi,
We are having Global template and operating in many countries. Currently we are planning for Rollout to India,
We want to know the Country India Version patch level 5 to 11 difference. Mean to say the major improvement/development changes in above patches. Your valuable information helps us in for further activities.
Looking forward for your valuable information.
Thanks & Regards
Prabhakar

DB Version and Patch level

Hi Friends
Where can i see DB2 Version and patch level on ECC 6.0?
For Windows Database : DB2 or DB6??
Patch level?
Thanks
srinivas

Hi Srinivas,
DB6 is a SAP abbreviation for "DB2 for Linux, Unix and Windows" .
The DB2 version and FP level of your database server can be found in SAP transaction ST04 or DBACOCKPIT.
In SM50 you can view the work process traces to display the server and client level
C Running with UTF-8 Unicode
C Running with CLI driver
C
C Wed Oct 21 17:03:27 2009
C DB2 client driver version '09.05.0001'
C Connected to DB2 server type 'DB2/LINUXX8664'
C Connected to DB2 version '09.05.0002'
If you need more detailed information you have to use "db2level" in a DB2 CLP window on the DB server.
Regards
Frank

How to check IGS version and procedure for upgrading IGS patch level

Hi all,
We are on BIW 3.5 .Iam not clear about how to check the version of IGS and its patch level .I went through various notes but still iam confused with tracing it , can someone plz help out?
Secondly want to upgrade IGS version i went through note 454042 but still confused with doing that , Can someone plz refer other notes or detailed procedure for upgrading IGS.
Our BIW Production and Test are on AIX and Development is on HP-Unix OS .
Points guaranteed for the same. Requested to revert at earliest as this is urgent .
Regards,
Saumya

Hi,
Check this link which may help u:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/igs-upgrade-1455477
The installation/upgrade procedures for the integrated IGS are as follows:
Integrated Version Installation
The integrated IGS is automatically installed with the SAP Web Application Server.
Integrated Version Upgrade
You find the upgrade files for the integrated IGS version on the SAP Service Marketplace:
http://service.sap.com/swdc ® Download ® Support Packages and Patches ® Entry by ApplicationGroup ® SAP Frontend Components ® SAP IGS ® SAP IGS .
There, you find the IGS executables and libraries (igsexe_.sar) as well as the IGS folder structure (igshelper_.sar) containing among others font files.
With the upgrade files of the executables and libraries, proceed exactly like you would with kernel patches (for example, extract the Archive to the same location). More information about kernel patches can be found in the related note 19466 in the section Copying and Installing a Patch.
The upgrade files for the IGS folder structure must be extracted to the instance directory (DIR_INSTANCE). More information can be found in note 1028690.
After a restart of the Web AS the new IGS is up and running.
Information about finding out your IGS patch level is provided in note 931900.
For an upgrade of an integrated IGS please also check note 896400.
For more info check this SAP Help doc:
http://help.sap.com/saphelp_nw04s/helpdata/en/4b/72d43ac66e1f08e10000000a114084/frameset.htm
Hope these helps u...
Regards,
KK.

Tuxedo Version 8.0, 32-bit, Patch Level 331, Few servers always hang..

We use Tuxedo Version 8.0, 32-bit, Patch Level 331 middleware, which is connected to Kenan Billling. Recently, observed few servers like om_Customer & ck_GRS servers (specific to Kenan API's) gets always HANG specific to few Databases. Would like to know the root cause for this hang out issue. As a work around, currently, we bounce these specific servers as and when it get hang,resulting few message loss.
Request your help on this. And also, currently, low/high water mark (new server spawning) set as 1:30,3:20, planning to change to 1:60,3:10 for a better tuxedo server performance. Need your comments on this.

Hi,
Thanks for your response.
Firstly regarding server hang issue, we did monitor the ULOG while is the server is hang, but, could not find much info'n in ULOG as Tuxedo keep adding the new servers of the same as queue length is getting increased but none of teh requests are processed. Refer the below ULOG info. Is there any generic reasons as to why servers gets hang and steps to check and rectify? please advice.
001554.com100.celcom.com.my!ck_GRS.22433.1.0: 05-19-2012: Tuxedo Version 8.0, 32-bit
001554.com100.celcom.com.my!ck_GRS.22433.1.0: LIBTUX_CAT:262: INFO: Standard main starting
001555.com100.celcom.com.my!ck_GRS.22433.1.0: ck_GRS.c@275: CUST SERVER: 6
001555.com100.celcom.com.my!ck_GRS.22433.1.0: ck_GRS: initiated.
001555.com100.celcom.com.my!ck_GRS.22433.1.0: LIBTUX_CAT:476: WARN: Server 11/1939: client process 9698: lost message
001555.com100.celcom.com.my!ck_GRS.22433.1.0: LIBTUX_CAT:477: WARN: SERVICE=M_PFAn MSG_ID=0 REASON=server died
001555.com100.celcom.com.my!restartsrv.22432.1.-2: 05-19-2012: Tuxedo Version 8.0, 32-bit
Secondly on server spawning, yes, we got the answer as how to adjust the respective parameters.

Registry Entry for SCCM Client Version w/CU Patch level

I'm trying to write a script that looks in the registry to find the CU patch level for a SCCM 2012 client. I can only find references in the registry to the base client version (ex: 5.00.7958.1000). I'm looking for something more specific (ex: 5.00.7958.1401).
I can find this in WMI, but I'd like to use the registry instead. Has anyone found anywhere to query this besides WMI?
Thanks

Hi,
For Cumulative updates check the registry at HKLM\SOFTWARE\Microsoft\SMS\Setup\CULevel
For more information, please review the link below:
Manage Configuration Manager 2012 Cumulate Update (CU)
http://blogs.msdn.com/b/minfangl/archive/2013/04/25/manage-configuration-manager-2012-cumulate-update-cu.aspx
SCCM 2012 Client Versions
http://sccmentor.wordpress.com/2013/09/11/sccm-2012-client-versions/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error: Current patch level of database is unknown. Use latest dbpatch build

hi,
I am applying EP6SP2 CM&COLL patch 5 DBPATCH.
current portal version: version=6.0.2.29.0
current C&COLL version: CM_COLL version=60 SP2 Patch 5
Before applying this patch, i applied CM&COLL patch 4 hotfix 8 and the DBPATCH included in tht. Now, after applying CM&COLL patch 5, i tried to apply DBPATCH which comes with CMOLL patch5 SAR file. My database is oracle database. While applying this patch i encountred following error:
<i>
Current database version: SP2.CM.SPs
ERROR: Error: Current patch level of database is unknown. Use the latest dbpatch build
java.lang.Exception: Error: Current patch level of database is unknown. Use the latest dbp
atch build.
        at com.sapportals.wcm.tool.dbpatch.Database.getPatchList(Database.java:48)
        at com.sapportals.wcm.tool.dbpatch.DBPatch.patch(DBPatch.java:66)
        at com.sapportals.wcm.tool.dbpatch.DBPatch.main(DBPatch.java:26)
</i>
Now according to SAP Note 761224, they asked us to use updated DBPATCH attached to this note. But currently there are only 3 files attached of MSSQL. I want the updated ORACLE_DBPATCH files.
rgds,
Nilz

Hi,
i m thru. i raised the question in OSS. They rectified the mistake and attached dbpatch_oracle.zip to SAP note 761224.
rgds,
Nilz

How to find out the IPS and DS Service Pack and patch levels in windows server.

Hi,
I have installed the Information Platform Services 4.0 and Data services 4.0 in windows QA system, now we need to install the same version of IPS & DS in windows PRD system for this how could we find out the exact version of IPS & DS ( Service pack and patch levels ) and where we can find the same.
Many Thanks,
Sudheer

Hi Sudheer,
On a Windows Operating Systems you can check the “Programs and Features” in control panel.You can see a list of both the Name and Version number of SAP BusinessObjects that is installed.
option 2:
Open CMC go to Settings. In the properties, you will find the Product Version.
Please check below SAP notes for more information.
http://service.sap.com/sap/support/notes/1602088
Regards,
Pavan

List of issues with patch level

Is there a list of application errors reported for each patch level?
When working with SAP R/3, there is a SAP note released for each patch level which states the changes delivered in that patch as well as what fixes are delivered. Therefore, it is easy to see what application errors exist in each patch level. Is there something similar for SAP Business One?

There are also notes for those Lists of issues with each patch level for B1. What is your B1 version and PL?
Thanks,
Gordon

How do I check if I need SAP GUI 7.10 Patch-Level 7?

Hi,
I have installed SAP GUI 7.10 client.
After restarting the PC, I tried to install the Patch-Level 7 but I got the message:
This SAP Front End Patch cannot be applied. Either this patch is already installed or the components to be patched are not yet installed at all.
My version for the SAPGUI installer is 2008.0.0.187
From Windows, I looked at the version for the installed file saplogon.exe, it is 7100.1.0.1027.
Does anyone know if my SAPGUI would require Patch-Level 7?
Thanks.
HY

Thanks for replying.
This is my SAP logon info, do it looks alright?
Release: 710 Final Release
File Name: saplogon.exe
File Version 7100.1.0.1027
Build: 0
Patch Level: 0
These are my installed component. Could it be that none of the below components need to be patched?
1. SAP GUI Suite
2. R/3 Add-on
3. General Add-on
4. Legacy Components
5. CRM Add-on
Edited by: Han Yang Lee on Jul 9, 2008 4:39 PM

How to determine 640/J2EE Startup Framework Binary Patch Level?

Hi All,
We are running BI ABAP with Java Add-in on WAS 640/SUSE/Oracle.
In the ABAP world, there are many options for determining the current kernel patch level. Disp+work -v, SYSTEM->STATUS, etc..
How do I determine the patch level of the J2EE startup framework (ie: jlaunch, jcontrol, etc..)? If I run these commands with '-version', I get a patch level of 0. From System Information, the Cluster Kernel Version is 6.40 PatchLevel 105424.313.
What I am trying to determine is if I have the binaries that map to the latest applied SP (18). Do I need to download J2EERTOS18.SAR and apply the bits or has that already been done? Or is the current patch level for the bits fro the J2EERTOS14.SAR file? Etc...
Any tips/suggestions?
Thanks much,
Greg

Hi
You can check the patch number like this;
D:\usr\sap\FT0\SYS\exe\uc\NTI386>jlaunch -version
Failed to reserve 1610612736 (0x60000000) bytes before loading DLLs (error 8).
jlaunch information
kernel release                700
kernel make variant           700_REL
compiled on                   NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode              UNICODE
compile time                  Jan 23 2008 20:42:28
update level                  0
patch number                  128                         <<< Here is the patch number>>
source id                     0.144
While regarding which file(s) to apply, please notice that the files you are not talking like
J2EERTOS16_1, is part of the J2EE support package stack, which can be applied with JSPM.
Regarding the kernel, you can alway refer to note 19466, and downlaod the lastest kernel from:
http://service.sap.com/swdc
   Support Packages and Patches ->
   Entry by Application Group "
   SAP NetWeaver and complementary products"
   SAP NETWEAVER" SAP NETWEAVER 7.0"
   Entry by Component"
   Application Server Java
   ===> SAP KERNEL 7.00 64-BIT UNICODE
Regards,
Thunder

Patch levels in 4.6c version

Similar Messages

Maybe you are looking for