Patch lists for MIDI instruments

I am looking to get LE8 as a sequencer for my keyboard equipment (mostly Roland stuff). Can anyone tell me if LE8 can load up the patch lists from these instruments and expansion boards ?? When I was using Cakewalk on a PC platform, you could get what they called instrument definitions that Cakewalk would use to define your avavilable patches. If I can do anything like this LE 8 may be the program for me.
Thanks in advance.
Rick

"Example: In my RS 7000 Fat Bass 1 is MSB 063, LSB 007, PC 007. How do I enter that in Logic?"
That's the problem: you don't. Or I couldn't, not in the rational way you're (quite rationally) suggesting.
If you go to the Environment window and create an external multi-instrument and double-click its header (title) bar, you'll see a drop-down menu for Bank, and another for Bank Message. I had to experiment with the Bank Message possibilities, because the Roland manual says Bank Select is "controller 0, 32" and LE8 makes you choose between those two (or choose the method of some similar product, though the similar ones aren't very similar to each other!). Pick a plausible one, and then initialize a bunch of banks in the Bank menu and see what sounds your keyboard produces. Try to match those up, by ear, with the sound banks listed in the manual for your external synth. When you find a Bank Message/Bank pair that produces something recognizable, try other banks and see if they fall into line also. If not, try again with a different Bank Message choice.
Once you find a Bank Message that produces reasonable results with several Banks, then you start double-clicking patch names within each bank and typing in names. It's a really stupid process. If there's a better one, I couldn't find it.
On the good side, once you've got the banks of patches all set, the whole package is transferable from one project to another through the Import Environment menu item. Which means, by the way, that you might want to do all this in a new, blank project that contains nothing but your external multi-instrument environment item.
Good luck--meaning I hope you had better luck than I did. It took several hours. If you want a bright side: it sure familiarizes you with all the sounds in your synth.
Message was edited by: Charles Hartman

Similar Messages

Patch List for Self-Service Human Resources (SSHR) in HRMS 11i

Friends -
We are planning to implement Self-Service Human Resources in HRMS 11i. I am able to find out information using metalink note : Recommended Patch List for Self-Service Human Resources (SSHR) in HRMS 11i [ID 108897.1].
As per note : 108897.1 there are bunch of patch details i am not sure which patch i need to apply currently we are on oracle apps 11.5.10.2 with Rup5
SQL> SELECT
2 BUG_NUMBER, DECODE(BUG_NUMBER,9062727,'K RUP5' ,7666111,'K RUP4' ,6699770,'K RUP3' ,5337777,'K RUP2',5055050,'K RUP1',3500000,'K',3333633,'J',3140000,'I',3233333,'H', 3116666 ,'G', 2968701, 'F'
3 ,2803988, 'E','Unknown')
4 FROM AD_BUGS
5 WHERE BUG_NUMBER IN ('9062727','7666111','6699770','5337777','5055050','3500000','3333633','3140000','3233333','3116666','2968701', '2803988')
6 and rownum=1
7 order by 1 desc
8 ;
BUG_NUMBER DECODE(
5337777 K RUP2
Please let me know which patches i need to apply for SSHR as per metalink note : 108897.1
Regards
VSH

Hi,
I agree. However, I understand that the Patches search in My Oracle Support website mentions that the RUP patch is included in the next RUP patch available.
Please note that you need to consider also the patches in the following documents on top of RUP 5.
Note: 1075477.1 - Known Issues on Top of Patch 9062727 11i.HR_PF.K.DELTA.5 (11i HRMS RUP 5)
Note: 1096417.1 - Applied Patch 9062727 (11i.Hr_pf.K.Delta.5) And Left With FFP<######> Invalid Packages
Thanks,
Hussein

Patches List for Installation of Lanaguage for 11i and R12

Kindlly let me know metalink notes ID for Patches List for Installation of Lanaguages for 11i and R12.

Hi,
Please refer to these docs.
Oracle Applications NLS Release Notes, Release 11i (11.5.10.2) [ID 316804.1]
Oracle Applications NLS Release Notes, Release 12.1 [ID 788053.1]
Requesting Translation Synchronization Patches [ID 252422.1]
How To Get The Guidelines To Install or Add the new NLS Language on E-Business Suite 11i or R12 ? [ID 1254325.1]
How to resolve NLS translation issues in an Ebusiness Suite 11i and R12 environment [ID 394112.1]
NLS Frequently Asked Questions [ID 399789.1]
Thanks,
Hussein

Patch list for Yamaha DGX-505?

I need a patch list to paste into the Environment window so I can access the voices on my Yamaha DGX-505 keyboard (rather than the GM MIDI). I looked on the Yamaha website and could not find one; hopefully it exists.

yeah, i've got the jv1080 with latin, session and orchestral boards.
but the jv1080 is in the multi instrument, when you make new -> multi instrum,ent. just initialize the multi for jv1080. that should bring up the presets (4 banks) i think. if not give us your email address and i will post you my multi instrument. no problem.

Need patch list for my synths

Hello everyone.
I need patch info for the following devices to use with Logic pro 8
ROLAND FANTOM G8
KORG TRITON PRO
EMU PROTEUS 2500
ROLAND JV880
YAMAHA SY77
can ANYONE HELP ME PLEASE?
God Bless

Thanks Fermusic! I had the same issue as the other person, and followed your instructions. You really know your stuff! (Btw, I listened to "The Game of Life", and it is a great song! Sounds to me to be very radio-worthy song for top-40 radio stations here in the USA.) I've gotten to the point where I have your ISO files in my environment, but they are not controlling my synth correctly. I have a Roland JV-1010 with the SR-JV80-02 Orchestral Expansion card (actually, I have two JV-1010's, and the other has the SR-JV80-16 Orchestral II Expansion card; my aim is to hook the 2nd JV-1010 to the first via the Midi Thru, but I'll worry about that later). Anyway, in the Environment I clicked all 16 boxes for the JV-1010 and all 16 boxes for the SR-JV80-02 Orchestral, as well as all 16 boxes for Session, which is included with the JV-1010. So, now when I create a track in my main arrange window, I can make it an external MIDI track, and access the menu in the Library tab that has all the instruments I imported into my Environment, which is good. When I select the JV-1010 option, it lists all 16 channels that I enabled, and same for the Orchestral and Session options. Once I select one of those, I go under the Inspector, and check the box next to Program, and then select the patch I want from the list of 1 through 127. However, when I do that, the sound I get when I play my MIDI keyboard does not correspond with the listed patch. Furthermore, the JV-1010 by itself (without the expansion card) has about seven sets of 1-127 (there's Preset A, B, C, D, and E). I don't know how to access all these different sets of 1-127. The Inspector only gives me the option to select from one set of 1-127, which I think is Preset-A. How do I access Presets B, C, D, and E? And likewise with the Session and Orchestral options, in actuality there's two sets of 1-127, but it only lists one set. How do I get to the other 127 patches? Also, your ISO list does not include the Orchestral II expansion- is that one available?
There's another similar, but different problem I'm having. I purchased Finale 2009, which comes with the Garritan Personal Orchestra sound library. I don't know how to access that sound library from within Logic. I Googled it the other day, and someone made mention of the Kontakt Player. Apparently, Finale/Garritan used to ship with the Kontakt Player, but they've replaced it with their own player, called Aria Player, and I can't bring up Aria Player from within Logic. I guess I will try to download a free version of Kontakt Player and maybe Logic will recognize it.
All these issues have in common the same problem: inter-usability of sound libraries, be they software sounds like Garritan Personal Orchestra or hardware sounds like the JV-1010. This is an extremely vexing and challenging issue! Btw, once I get Logic to recognize all of my sound libraries (software and hardware alike), I'm going to turn my attention to Finale, and try to get all of my Logic sound library as well as the JV-1010 working with it. Any advice there? Haha- sorry to overload you with questions, but you are apparently a well of knowledge!

How do I create custom patch lists for external synths?

Hello peeps, I'm a long-time Cubase user trying out Logic for the first time. This is driving me crazy. Just want to know how to make Logic show synth patches for a JP 8000, an MS 2000, MC 505, or any other external synth; so that I can see, in Logic, the patch I want a certain synth to switch to. I've tried in the environment to name a few, but I don't know where to input the MSB, LSB, Program change info. Its right there in the inspector window in Cubase. How do I do this in Logic? I'm stumped.

"Example: In my RS 7000 Fat Bass 1 is MSB 063, LSB 007, PC 007. How do I enter that in Logic?"
That's the problem: you don't. Or I couldn't, not in the rational way you're (quite rationally) suggesting.
If you go to the Environment window and create an external multi-instrument and double-click its header (title) bar, you'll see a drop-down menu for Bank, and another for Bank Message. I had to experiment with the Bank Message possibilities, because the Roland manual says Bank Select is "controller 0, 32" and LE8 makes you choose between those two (or choose the method of some similar product, though the similar ones aren't very similar to each other!). Pick a plausible one, and then initialize a bunch of banks in the Bank menu and see what sounds your keyboard produces. Try to match those up, by ear, with the sound banks listed in the manual for your external synth. When you find a Bank Message/Bank pair that produces something recognizable, try other banks and see if they fall into line also. If not, try again with a different Bank Message choice.
Once you find a Bank Message that produces reasonable results with several Banks, then you start double-clicking patch names within each bank and typing in names. It's a really stupid process. If there's a better one, I couldn't find it.
On the good side, once you've got the banks of patches all set, the whole package is transferable from one project to another through the Import Environment menu item. Which means, by the way, that you might want to do all this in a new, blank project that contains nothing but your external multi-instrument environment item.
Good luck--meaning I hope you had better luck than I did. It took several hours. If you want a bright side: it sure familiarizes you with all the sounds in your synth.
Message was edited by: Charles Hartman

Looking for Keyence Instrument driver for LV.

Looking for instrument driver for LV developed for the Keyence LS-7500 series micrometer. Has anything seen any or done this already? Any help would be greatly appreciated. BTW I have already checked NI's listing of instrument drivers to no success.

Hello-
There are no drivers listed for this instrument at http://ni.com/idnet. You may want to contact Programmed Test Sources to see if they have a LabVIEW driver for their instrument. If they don't, you can easily create a low-level driver by configuring an I/O assistant VI for each function in the manual. Once you have this low level driver you can just combine functions to make higher level VIs. Alternatively, you can hire an Alliance Member to write an driver for you.
Alliance Member Directory
http://www.ni.com/alliance/alliance_member.htm

How do I keep my Patch names for my external Midi instruments when starting

Whenever I start a new project all the names in the different banks are just numbers.
I use a JV-2080 with expansion cards which represent close to 2000 patch names in 11 banks.
(I have some other Midi instruments too with their banks)
I have a "basic setup" project where all the patches for all the instruments are loaded, and until I know a better way, I always start with that "basic setup" and then modify it and "save as" a new project.
Is that the only way? or is there a way to automatically load all the patch names in the Multi Instrument window?
I find it very annoying that I cannot start a project from scratch, without having to copy and paste hundreds of patch names.
I read somewhere in the manual that "initializing" the banks in the Multi Instrument Window, occupies extra memory. I find this comment very strange because the text file containing all my patch names is only 24kB just a drop in the bucket.
Or am i missing something?

The whole point of autoload temapltes is you setup a Logic song to contain all the stuff you need, environment configuration, patch names, track assignments and so on, so whenever you load Logic or start a new song, all your stuff is instantly there.
Think of it like a real studio - when you start a new song, you don't unpack all your gear from boxes, put them on shelves, and wire them up etc before you start - that stuff is all done once beforehand. You just turn them on, and go.
Same with Logic - it loads your startup template with all your stuff in it, so you can immediately just start doing music, with no futzing necessary.

List of wage type for mid year go live

Dear All,
I need your help we are going for mid year go live and we are planning to uploaded payroll results .so here iam confissued with the wage types which should be uploaded so kinldy send me any list of wage types for statutory and income tax to be uploaded in results so that they can get statutory forms and form16.
thks

Dear Laxman,
refer the links its use full to you and directs you towards solution
[Mid year Go-Live (India Payroll);
[http://help.sap.com/saphelp_47x200/helpdata/en/5a/f57415558f4e52925b05aa57dad09d/content.htm]
[regarding mid year go-live;
regards,
mohammed

How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

Every time I move the volume, it moves back!
Check, if you have a volume automation set on the software instrument track.
If the track volume automation curve is enabled, the volume slider for the track will move with the automation curve.
Click the automation curves disclosure triangle in the track header and disable the volume automation.

Has anyone used reMIDI as a plug-in for GarageBand. I downloaded a trial version of reMIDI, which enables MIDI instruments to be strummed or arpegiated, but can't get it to work in Garageband. How do I set it up?

Has anyone used reMIDI as a plug-in for Garageband ('08)? The program allows MIDI instruments to be strummed or arpegiated. I have a trial version, but can't get it to work in Garageband. Wonder how to set it up.
Thanks, Doctor Mark

Port Forwarding.....or Port Mapping....as Apple calls it is a difficult and complex configuration method for most users. Because there are so many variables involved in this type of setup, it is not possible to provide a step by step guide that will work for everyone with all devices.
It is possible that a setup guide exists for the the WD drive and AirPort Extreme, but you will have to go looking for it on the Internet. Even if you find one, it may not be tailored to your specific situation or needs.
Sometimes, you can do everything right....at least according to someone's article or "how to" guide, and things still will not work correctly.
In situations like this, when you really don't know what to do, you need to enlist the aid of an IT pro, who will know what to do based on your particular products and unique circumstances. Sometimes....they won't be able to get things working either due to particular circumstances.
But, before you do this, I would strongly recommend that you use a Static IP address for your Internet connection with your ISP. If you do not have this now, contact them to ask them if they offer this type of connection. Expect to pay more for this type of service, of course.

Instrument list for Express 8?

I downloaded a 29 page PDF, but didn't see a complete instrument list for Express 8.
Could someone list the electric piano instruments available?
Thanks.

i'm not at my Mac right now but i think if you check the LIBRARY (top right of Arrange screen)you can find all the available instruments(?) check it out. i might be wrong.

Patch names for Roland?

I'm getting lost in the Environment chapter. I'm trying to set up my Roland JV-1010 external synth module, and not getting the sounds working right. I'm sure there are several problems, which I'll work through one by one, but this I can see is going to be a key:
Is there some way to get the Roland's several banks of patch names to appear automatically in LE8, without the huge and error-prone task of typing them all in?
I just want to be able to select the JV-1010 as the MIDI instrument for a track, and go through the list of patch names and choose. Am I missing a basic principle here?

Charles: I had the very same problem using a Yamaha Motif ES8 keyboard. I wanted to find a way to have logic recognize the patch names and bank numbers. I didn't find my answers here. I was very lucky to go on to the Yamaha Motif users group and find someone there that had done all of the leg work as far a typing out the patch names and bank changes and then saved it in logic as a .logic file. So I downloaded that project file from the yamaha users group and opened up that project in logic express but before I recorded anything on it, I saved the blank project with the yamaha midi info as a template. Now, every time I open up a new project, I have the option to open up that template and it has all of my patches and bank numbers pre-loaded.
If I were you, I would look around and try to find a Roland JV-1010 users group and see if you have the same good fortune.
Good Luck

Why do my midi instruments stop working after 1-2 minutes?

So I've been toying around with Garageband 11 on my MBP base 13 with upgraded memory. I am able to get a couple of midi instruments to connect and to sound and record through the program, however, I'm running into an issue with two controllers in particular. I'm using an older emedia midi controller with no available drivers online (that I've seen as of yet) and a set of PS3 usb Band Hero drums. As I stated I can get them both connected and they sound great with little to no latency. What's strang is that after two minutes of use, playing through with controller, the sound cuts out. It still registers there is a device connected, but with both things you can no longer hear the instrument or record anything. I'm stumped. I ran this referall to set up the drums and it looks as if I'm not the only one struggling, but I've yet to receive any feedback! http://themartiansarecoming.wordpress.com/2011/04/14/turning-ps3-guitar-hero-wor ld-tour-drum-kit-ghwt-into-midi-input-device-for-garageband-11/
Anywho I thought some folks on here might have been through this or just have a wide enough understanding of the whole system as to what might be causing this issue. My hopes are it's a plugin issue or something simple I can download, but theres a chance it's just compatibility. The usb mic that I have from the band hero kit works great and I've yet to have it stop working, but this is running through a different setup switching from built in mic to the usb. Any thoughts are greatly appreciated so don't hold back!
Thank you
Max

Yes I did that but nothing happened. I removed about 6 apps that use sounds or creates ringtones to no avail. The only thing that helps, and this temporary, is hitting the mute button and off and all the sounds for all phone basics-texts, ringers, alerts ce back up. No program seems to shut it down, just time and within 3 days it reverts back to no sounds for ringers, texts, etc. I don't see any problems with speaking sounds and game sounds, yet. I have a lifetime with pc's since 1978 with my radio shack trs80 and this one befuddles me. Something is telling me there is a problem with the operating system on iOS 6 because my hours of research has proven to assure me apple phones are losing their basic sound DLL's in some template, being c++ based largely, somebody I think has a pointer getting 'stuck' and when a hard reboot can't clear the issue, my experience tells me somebody let a template get out of hand and is a serious problem. I found hundreds of similar sound problems with myriads of solutions such as resynching with iTunes, updating iOS if it hadn't been already, turning a list off toggles on and off then rebooting. For me the mute/unmute has worked temporarily and sometimes it won't even work sometimes and I have to have the phone on vibrate and keep it on my person so as to feel the ring/alerts. Being a long time proficient programmer/basic networker/basic hardware user, I don't like duct tape solutions such as toggle a switch like Fonzi smacking the jukebox to get the music to play. I always wondered why Arnold(Asian or chubby Caucasian) never got his jukebox fixed. So anybody know a non-duct tape solution or seen am apple thread describing a permanent solution please let me know?!? Thanks, Jon
<Email Edited by Host>

Is there a way to display played chord names for software instruments in the new Garageband?

I know this was possible in previous versions, and displays by default in Logic, but can the new Garageband show chord names for MIDI inputs on software instruments?

No, you cannot list the files from the res folder. You could just put a textfile with all the image names in the res folder, and read the images file names from there..

Patch lists for MIDI instruments

Similar Messages

Maybe you are looking for