Patch made controller change

Hello,
Curently, we have 11.5.10 and to fix some issues applied the patch 855411.
And after that, in the procurement pages, the Controller gets changed from the custom one to the seeded one.
Due to that, the page functions with standard behaviour.
Could you plz any one suggesst, how to bring back the pages to work with the custom / extended CO.
Thanks in advance,
Regards,
Krishna

Please see
http://www.sun.com/service/sunconnection/solaris10patc
hes.html for available access options.Isn't Patch Manager available only for Solaris 8/9?
Does this mean that Sun isn't providing anything to automate patching for peope who wish to remain "anonymous"?

Similar Messages

The Microsoft Exchange administrator has made a change that requires you to quit and restart outlook.

Then I get this once outlook is open:
Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened. The operation cannot be performed because the connection to the server is offline".
Outlook 2013 client
Exchange 2010 SBS
I have recreated the profile, doesn't work. Recreating the OST doesn't work. Starting Outlook in any safe mode doesn't work. Disabling hardware acceleration and add-ins does not work.
repair account does not work - I get the Congratulations message, confirming it was able to get everything from the server... and when I restart Outlook:
"The Microsoft Exchange Administrator has made a change that requires you to quit and restart Outlook".
BJN
Also the user in question is not getting new mail.
And I have tried this
outlook /resetnavpane to no avail.

Hi,
Please confirm if the issue happens to all users in your Exchange server.
In client side, please check the Connection Status when the issue occurs:
Please open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar –Connection Status to check the connection.
Please notice the Server name, status, protocol and Type information.
In Exchange server, please check whether all Exchange services are started and running in Exchange 2010. Also check whether there is any error information in Event Viewer.
If the issue only happens to one user, please update the Outlook client with the latest patches and service packs to have a try.
Regards,
Winnie Liang
TechNet Community Support

[svn] 3552: This patch contains multiple changes, mostly renames, outlined below:

Revision: 3552
Author: [email protected]
Date: 2008-10-09 15:07:55 -0700 (Thu, 09 Oct 2008)
Log Message:
This patch contains multiple changes, mostly renames, outlined below:
1.Rename properties in FxComponent: skinObject -> skin, skinZZ -> skinClass.
2.Rename property in Skin: data -> fxComponent (this also means Skin doesn?\226?\128?\153t implement IDataRenderer anymore)
3.Renames in DataGroup: Mostly around "skin" to "renderer" to get terminology correct
4.Random other cleanups: For instance changing typing of "*" to "Object" in ItemsComponent and DataGroup or removing some un-used imports in Group and GroupBase.
5.Lots of cleanup in flex4tests to deal with renaming of classes and renaming of properties
6.Gumbo-manifest.mxml - typo...some files listed as mx.componentss.* instead of mx.components.*. This file is going away as all components are moved into the 2009 namespace, but we'll fix this for now.
7.Defaults.css ?\226?\128?\147 FxDataComponent should be FxDataContainer.
8.SystemManger fix: this was in the previous SystemManager but got overwritten by a bad merge. Jim?\226?\128?\153s aware of the issue, and I?\226?\128?\153m checking in the fix for it.
QE: Yes - Joann and Steve have pre-emptively made the changes
Doc: Yes
Bugs: SDK-17056, SDK-17174
Reviewer: Chet, Evtim
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17056
http://bugs.adobe.com/jira/browse/SDK-17174
Modified Paths:
flex/sdk/trunk/development/eclipse/flex/flex4test/src/AddItemsTest.mxml
flex/sdk/trunk/development/eclipse/flex/flex4test/src/EffectsProperties.mxml
flex/sdk/trunk/development/eclipse/flex/flex4test/src/NewEffects.mxml
flex/sdk/trunk/development/eclipse/flex/flex4test/src/RemoveItemsTest.mxml
flex/sdk/trunk/development/eclipse/flex/flex4test/src/ScrollbarFrenzy.mxml
flex/sdk/trunk/development/eclipse/flex/flex4test/src/components/AnimationPropertiesForm. mxml
flex/sdk/trunk/development/eclipse/flex/flex4test/src/components/CircularScrollBar.as
flex/sdk/trunk/development/eclipse/flex/flex4test/src/flex4test.mxml
flex/sdk/trunk/development/eclipse/flex/flex4test/src/skins/CircularScrollBarSkin.mxml
flex/sdk/trunk/development/eclipse/flex/flex4test/src/skins/MyVScrollBarSkin.mxml
flex/sdk/trunk/frameworks/projects/flex4/defaults.css
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/DataGroup.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxContainer.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxList.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxScroller.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/Group.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/Skin.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/baseClasses/FxComponent.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxApplicationSkin.mxml
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxHScrollBarSkin.mxml
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxHSliderSkin.mxml
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxNumericStepperSkin.mxml
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxSpinnerSkin.mxml
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxVScrollBarSkin.mxml
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxVSliderSkin.mxml
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as

Hi, Nubz!
Yes, I just saw that, and am still chuckling.
Maybe that will mollify the Jive gods?
Thanks again,
Jim

If i made any changes for one employee means it get reflect for others

Dear friends..
I am Abaper, i am in Support phase, i am facing one HR issue. kindly give me some idea to solve.
i have 2 employee number 2025 (VIJAYAN.M) and 2925 (VIJAYAN.M). in this both case employee name is same..
if i made any changes for employee 2025 infotype (for eg bank details) means, 2925 also get reflect the same changes vice versa..
Kindly give me some idea
Regards
Deva

Hi! Deva,
As you are ABAPer , and if you are doing it through some programing , then you must have getting same problem for all those employees who have similarity in their name or other,
so, please check or debug what criteria you have given for search ,for changing/updating bank key field,
check, it should be perner base not name base or any other.
Please check and revert so that we try to resolve.
Check one thing that is it only problem with bank key any other infotype also.
*Sneha.

"The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook" in Exchange 2013

In Exchange 2013, Outlook finds a new connection point made up of the user’s mailbox GUID + @ + the domain portion of the user’s primary SMTP address. This change makes
it much less likely that users will see the dreaded message “Your administrator has made a change to your mailbox.”
http://technet.microsoft.com/en-us/library/dd298114(v=exchg.150).aspx
Although the error message in the topic has been already improved a lot in Exchange 2013, the users may still encounter them in some specific scenarios. We have collected them and let’s discuss them in this thread.
Symptom
=======================================
Consider the following scenario:
Exchange 2013 was installed for a migration from Exchange 2007/2010.
The legacy Exchange server is removed after successful migration.
Exchange 2013 may be updated to Exchange 2013 SP1.
Some users were being randomly prompted with a popup in their outlook client with the following message when connecting with Exchange 2013 server:
“The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook”
Cause
=======================================
The issue may be caused due to Public Folders.
The msExchHomePublicMDB attribute on Exchange 2013 databases was set to deleted legacy public folder object.
Solution
=======================================
Removed the Public Folder from all the Exchange
2013 Databases. To do it, we can use ADSIedit.msc and remove the arrtibute - msExchHomePublicMDB from all the Databases:
1. Open ADSIEdit.
2. Connect to the Configuration container.3.
Expand Configuration, expand CN=Configuration,DC=Domain,DC=com.4. Expand CN=Services -> CN=Microsoft Exchange -> CN=Domain -> CN=Administrative Groups -> CN=Exchange
Administrative Group -> CN=Databases.5. In the right hand pane you will see a list of databases.6.
Right-click the listed database object -> Properties.7. Check whether the msExchHomePublicMDB value is set to an unavailable value. If you see reference to the old database,
please clear the value.8. Click OK.9. Check the rest of the databases to make sure
that they are not populated in the same way.
References:
https://social.technet.microsoft.com/Forums/en-US/2f736bdd-1c00-4a22-97a5-95faeadf1495/exchange-2013-sp1-users-randomly-prompted-with-the-microsoft-exchange-administrator-has-made-a?forum=exchange2010
https://social.technet.microsoft.com/Forums/lync/en-US/7a7b3cf8-8761-421c-9d55-6c84e05531c0/the-administrator-has-made-a-change?forum=exchangesvrclients
https://social.technet.microsoft.com/Forums/en-US/0d71c843-b662-493c-ab6e-30708929ef18/2013-sp1-problem-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and?forum=exchangesvrdeploy
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

This one? http://support.microsoft.com/kb/2934750

Ever since the update to OS 5 software I haven't been able to sign in with the new apple id or sign in with the former apple id (software update made me change the id and password). I've also lost ability to update apps on computer. ARGH

I can't sign into itunes on my ipad (original) since the software update. Genius can't help-says its Itunes support I need, but they don't help either (tell me to reset password) which I've done several times. Can't update apps on my home computer either. Update made me change Apple id, so now it thinks I have two ids, but won't let me sign in for old one. I pad won't work at all. Frustrated beyond belief and get NO HELP from apple.
if they want us to buy their product they better start supporting them. Oh yeah, everything worked FINE before the update.
Anyone have ideas?

No. The problem is that when you changed Apple IDs you did not update your Apple ID to reflect the change, so your phone is still associated with the old ID. You will need to un-associate it. The process is the same as what you would do if you sold the phone. See: http://support.apple.com/kb/HT5661

I can no longer access or use my mail only through iCloud. I have made no changes to cause this., I can no longer access or use my mail only through iCloud. I have made no changes to cause this.

I can no longer use my mail, only can access through icloud. I have made no changes or updates to create this problem. TWC did take over my internet provider and suddenly I started have a myriad of issues. I am in the process of changing providers to ATT because TWC does not support Safari.

How does TWC not support Safari? (They're lying)
You're using Apple Mail right?
What happens when you launch mail?
Please provide all errors you see.

Exchange 2013 SP1 users randomly prompted with "The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook"

I got a call to check an issue with a Exchange Server 2013 SP1 environment recently. All server was upgraded from Exchange server 2013 CU2 to Exchange Server 2013 SP1. It was done successfully but many users were being randomly prompted with a popup in their outlook
client with the following message:-
“The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook”
Although there wasn’t any changes of late in the environment there were random popups like these for multiple users. As the behaviour was not consistent and effecting the entire upgration population
Please suggest us how to resolve the issue.
Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Hi,
Does the issue happen to all Outlook 2013 users? Please create a new Outlook profile to have a try.
If it fails, please check the msExchHomePublicMDB value in ADSI Edit:
1. In Adsiedit, expand Configuration-->CN=Services -> CN=Microsoft Exchange -> CN=domain -> CN=Administrative Groups -> CN=Exchange Administrative Group -> CN=Databases.
2. Right-click the listed database > Properties.
3. Check whether the msExchHomePublicMDB value is set to an available value. Please change the value to <not set>.
4. Click OK.
Then check whether the issue persists.
Thanks,
Winnie Liang
TechNet Community Support

Exchange 2010-2013 Migration - Outlook Client gets "Your administrator has made a change..."

So we're migrating from an Exchange 2010 environment to Exchange 2013. We use a single namespace ("exchange.contoso.com") for both internal and external clients.
In testing, we have taken a few machines running outlook 2013 and 2010, and edited their hosts file such that "exchange.contoso.com" points toward the new exchange 2013 environment, rather than the 2010 environment for our users. So far so good,
they can connect, no issues.
However, when we move a mailbox to the 2013 environment, the outlook client comes back with "Your Exchange Administrator has made a change which requires you to restart outlook". This error affects both Outlook 2013 and 2010. We do have public
folders in place in exchange 2010, but we have not yet migrated them to 2013 (because the user's still are on 2010).
Repairing the profile is no help, and recreating the profile does not work either. Any thoughts?

Hi ,'
On you first post you have said you have put host file entries for the namespace "exchange.contoso.com"
in few of the client machines .
what about for autodiscover namespace did you have put any host entries for that .If not please put that
too in the host file of the client machines and then check by moving anyone of the mailbox from exchange 2010 to exchange 2013 .
Same time please check this blog especially on the end of the page .
http://blogs.msdn.com/b/aljackie/archive/2013/11/14/outlook-and-rpc-end-point-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
Regards
S.Nithyanandham
Thanks S.Nithyanandham

The Administrator has made a change

Hi!
We are running Exchange 2013 together with Outlook 2013.
After installing Exchange SP1, the following messages appears on all clients:
"The Exchange admin has made a change that requires you to restart Oulook"
This appears when starting Outlook, and also at random intervals when Outlook is running. I have tested to recreate a profile on the client, but this doesn't help. And the message did not apear before Exchange 2013 SP1.
What can I to to make this disapear?
Regards,
Lennart

Hi Lennart,
Is this a pure Exchange 2013 environment or con-existence with Exchange 2010/2007 servers? Did you do any other changes besides the SP1 update?
Please check in ADSIEdit > Configuration >CN=Services > CN=Microsoft Exchange > CN=your ORG name > CN=Administrative Groups > CN=Exchange Administrative Group >
CN=Databases, please check the attribute “MSEXCHHomePublicMDB” of your databases, if they are pointing towards the deleted Objects, please delete the entries.
You can also check the RPC Client Access logs (Exchange Server\V15\Logging\RPC Client Access) to find if any errors happened.
Best Regards,
Tracy Liang

One Exchang 2013 user gets "The Microsoft Administrator has made a change that requires you to quit and restart Outlook" each time his desktop is rebooted.

I recently migrated all of my users from Exchange 2007 to 2013. One Outlook user gets this prompt each time he opens Outlook after rebooting his desktop. He gets it after every reboot.
I tried re-creating his Outlook profile and that did not resolve the issue. I also tried to create an Outlook profile for him on a different desktop and got the same message.

any help from:
http://social.technet.microsoft.com/Forums/exchange/en-US/7a7b3cf8-8761-421c-9d55-6c84e05531c0/the-administrator-has-made-a-change?forum=exchangesvrclients
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Outlook 2013 users getting "The Microsoft Exchange administrator has made a change that.....

Hi,
We are on Exchange 2013 SP1 and we are randomly seeing all Outlook 2013 clients getting "the Microsoft Exchange administrator has made a change..." forcing them to restart Outlook. Outlook 2010 clients are not affected so seems to be related to
Outlook anywhere.
Cant see anything in the event log but seeing some 500 errors in the IIS log.
any ideas on where to look?
Kristian

Hi,
I finally get to resolve my issue with this :
http://social.technet.microsoft.com/Forums/lync/en-US/7a7b3cf8-8761-421c-9d55-6c84e05531c0/the-administrator-has-made-a-change?forum=exchangesvrclients
"Please check in ADSIEdit > Configuration >CN=Services > CN=Microsoft Exchange
> CN=your ORG name > CN=Administrative Groups > CN=Exchange Administrative Group > CN=Databases, please check the attribute “MSEXCHHomePublicMDB”
of your databases, if they are pointing towards the deleted Objects, please delete the entries."
Restart the server, restart computers and it should be OK. If not, you might try to create a public folder (http://social.technet.microsoft.com/Forums/en-US/0d71c843-b662-493c-ab6e-30708929ef18/2013-sp1-problem-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and?forum=exchangesvrdeploy)

MS Outlook 2013 Error message "The microsoft exchange administrator had made a change that requires you to quit and restart outlook"

I am currently running 2 HP Servers, SAN Storage. I have Exchange 2013 installed and MS Outlook 2013 randomly appears with the message
"The Microsoft exchange administrator has made a change that requires you to quit and restart outlook" It is happening very frequently and is appearing every few seconds on a lot of users.

Hi WeeMac22,
If you migrated from Exchange 2010 to Exchange 2013, I found a KB for your reference:
Outlook 2013 cannot connect after an Exchange Server 2010 mailbox is moved to Exchange Server 2013
http://support.microsoft.com/kb/2934750/en-us
If not, I suggest using OWA to verify whether this issue remains.
1. If everything works well in OWA, it seems an issue on the Outlook client side.
I suggest run Outlook under safe mode to avoid some AVs and add-ins.
I suggest re-create profile to refresh the caches.
I suggest re-install the Outlook if all methods above not working.
2. If this issue remains in OWA, please verify whether all users on the Exchange 2013 have this isse.
If only one user has this issue, I suggest create a test user to check whether the test user has this issue.
If the test user works well, I suggest try to re-create the specific user account.
Please make a full back up before re-creating.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Microsoft Exchange administrator has made a change that requires you to quit and restart Outlook.

guys we just did the exchange migration from SP3 RU6 2007 to exchange 2010 SP2 , and moved the mailboxes , but few users are getting the prompt saying that -
Microsoft Exchange administrator has made a change that requires you to quit and restart Outlook.
So what best can we do to fix the issue. Apart from creating the new outlook profile i know that can be done but to get deeper is anything related to CAS Arrays preferred site enforcement.
Thanks

Hi,
Once you moved the mailboxes from older version to new version Exchange RPCClient access Point will change as per new database settings, so users normally get the popup saying that "Microsoft
Exchange administrator has made a change that requires you to quit and restart Outlook", so user has to restart the outlook to update the new configuration.
If its taking long time that you have to check the autodiscover URL which is configured in Exchange 2010 and Exchange Replication service these services are responsible
to update the new configuration in client.
Also if users are different location (AD Site) it will take some time to replicate.
I hope there won't be any issues for client due to this popup.
Regards
Ganga Enterprise Messaging Administrator-Exchange 2010. Windows 2008 Active Directory Configuring.

Double prompts for Exchange 2013 migrated users: "The microsoft exchange administrator has made a change that requires you to restart outlook"

I have Exchange 2010 SP3 in my environment and am migrating to Exchange 2013. Whenever a mailbox is migrated, the Outlook 2013 client will prompt the user with a "the exchange administrator has made a change that requires you to restart
Outlook". When the user does so, he or she is prompted again. After he or she closes and reopens Outlook for the second time, the issue is gone permanently.
I've seen a number of other posts about repeated prompts like this but I haven't yet found one or someone gets exactly 2 prompts for each client and no more.
A couple of pieces of information that may be relevant:
1. On exchange 2013, the authentication method for the internal host name is NTLM
2. I have not yet migrated public folders from Exchange 2010. I plan to do that after the mailbox migration is complete.
Thanks in advance for your help.

Hi,
From your description, after mailboxes are moved from Exchange 2010 to Exchange 2013, users receive the following prompt when opening Outlook.
The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook.
In order to solve this issue, you need to apply the Outlook update that is described in KB 2863911.
For your reference:
Outlook 2013 cannot connect after an Exchange Server 2010 mailbox is moved to Exchange Server 2013
https://support.microsoft.com/kb/2934750?wa=wsignin1.0
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Patch made controller change

Similar Messages

Maybe you are looking for