Patch needed for uploading sap ecc 6.0 country india version

Hello experts,We are facing problems whileworking with the cin module,First of all i would like to convey that our server is based at jakarta and that the license is based at jakarta(indonasia),however the off shore delivery centre is based at india,so please guide us like what patches are needed to be uploaded so that we can operate the cin version.
Functional error----- The error or problem been faced by the functional consultants is that while entering the FTXP tranction the respective fields are always in the display mode and not allowing to enter any data(only single session been opened and not the case of multiple session in the same tranction),
pls guide,thanks in advance,
Anshuman.

Thanks guys for your replies.
Uday,
Is there any Authorization object that will let me download ECC IDES?. I dont see any such object ( named ECC or similar) assigned to my SID in Serv Mkt Place.
Could that be the reason?. Pls advise.
JD
>
uday kumar wrote:
> Hi
>
>
All corrective software packages, for SAP NetWeaver 7.0 and SAP Business Suite 2005 and beyond that are delivered after April 2nd, 2007 will ONLY be available via SAP Solution Manager's Maintenance Optimizer. Find more details here
> Its applies for only support packs and SP stacks you can download Software packaged irrespective of solution mangaer directly
>
>
Sorry if its a repeat question. I need ur help. I was trying to download SAP ECC 6.0 IDES from SAP service market place. I identified all the files needed for ECC 6.0 IDES version installation, added them to download basket, though they wont show up there
> R u sure that you have added them to download basket,do you have proper authorization to download them to download manager,cross check the setting of download manager and your S userid and password.
>
>
I have Serv Mkt place ID and is there anything else that I need to install first to be able to download IDES files?.
> Did you configure downlaod manager at your desktop or forntend server?
>
> Regards
> Uday

Similar Messages

SAP ECC 6.0 Software component Versions or Product versions in XI (SLD)

Hi All,
please, let me know the solution for this problem,
Curently we r using PI 7.0 SPS 14 kernal Version 179.
Unable to find out SAP ECC 6.0 Software component Version or (Product version) in SAP XI 7.0 SLD.
how to solve this issue....
Advace thanks.
Mahesh

Hi Volkar,
I am doing Plant driven procurement service enablement scenario by using XI 7.0, for this,
we are integrating MM & SRM SUS Through XI 7.0 (MM -- XI-- SRM SUS).
For doing this Scenario,
1. Downloaded XI Content for SRM
2. Imported XI Content into the IR
3.After importing, Plan_Driven_Procurement_SupplierEnablement Scenario was enabled.
Here, MM side SWCV is R/3 4.6 is available by default. but in my case i need to change to ECC 6.0(bcoz,currently we r using ECC 6.0 version )
In SLD, there is no ECC 6.0 version.
So, how to solve this issue.
Thanks in Advance.
Mahesh

CIN (country india version patch)---where i will get

Hi,
what is 'CIN (country india version patch),
my system is R/3 IDES 4.7 on NT & SQL,
where i will get, what will be the patch format?
kindly help me
Regards,
swathi-k

Hi,
For your version of SAP, you may need to have SAP IS-U LOCIN 100
It is available at http://service.sap.com/swdc
select 'Search for all Categories' and put CIN in the search text and hit search , you should be able to get all kinds of existing CIN versions.
Check the following notes:
950514 - Overview Note
950350 - Release Strategy (Delivery Dates)
950511 - Installation note
950513 - Support Packages
Regards,
Siddhesh

Country India Version Patch level 5 to 11

Hi,
We are having Global template and operating in many countries. Currently we are planning for Rollout to India,
We want to know the Country India Version patch level 5 to 11 difference. Mean to say the major improvement/development changes in above patches. Your valuable information helps us in for further activities.
Looking forward for your valuable information.
Thanks & Regards
Prabhakar

Hi,
We are having Global template and operating in many countries. Currently we are planning for Rollout to India,
We want to know the Country India Version patch level 5 to 11 difference. Mean to say the major improvement/development changes in above patches. Your valuable information helps us in for further activities.
Looking forward for your valuable information.
Thanks & Regards
Prabhakar

Need to install SAP ECC 6.0 & NW-04s Components

Hi Experts,
I am new to SAP.
I have to install SAP ECC 6.0 ,NW-04s(PI,BI,MI,.......) , so I need to know whether SAP Software will support the below illustrated Hardware or not.
1. Intel Processor Core-2-Duo 6650 2.66 Ghz
2. Mother Board Intel DG33FBC.
3.RAM 4 GB.
I appreciate your answers,and also points will be rewarded.
regards
Ken George

Hi Ken,
From my experience, I did tried to install ECC6 on a server with RAM 2GB but without Java stack. As for NW04s, if you want to install one nw04s technology it is sufficient for the current hardware specification. If you want to install all those software because of you want to learn, could you advice me which path that you want to go?
Thanks and Regards

Hardware requirement for Using SAP ECC 6.0 (IDES)

Hi
I am planning to buy a Laptop for Learning more about SAP modules. I am planning to install ECC 5.0 or 6.0 on the laptop.
Can any one tell me about the minimum configration required for SAP IDES installation. If possible please let me know the processor to be used, the speed of the processor, the RAM and HDD required.
Also Kindly let me know from where do we get the IDES licence version of ECC 5.0 / ECC 6.0
Piyush

Hi
<b>Please go through the following SAP OSS Notes -></b>
Note 822208 - IDES mySAP ERP ECC 5.0 SR1
Note 982228 - Installation KJEPS 601 on SAP ECC 6.0
Note 1070948 - SAP Best Practices Baseline Package PL based on ECC 6.0
Note 748977 - INST: mySAP ERP 04 ABAP on iSeries
Note 855498 - Installation Prerequisite Checker
Note 1012486 - Important Information on upgrading ERP-Systems in HA-Setups
Note 855897 - SAP Business Suite 2005 Installation:IBM eServer iSeries
Note 989368 - Upgrade to SAP ECC 600 with VIRSA 400_700
Note 1034686 - Installation: Leasing Strategic Improvements on ECC 6.0
<u>Please Contact local SAP support from this link below</u>
https://websmp209.sap-ag.de/~form/handler?_APP=00200682500000002025&_EVENT=DISPLAY&SELAREA=501100035870000000694#
Do let me know.
Regards
- Atul

Any patch need for OEM10.2.0.5 and R12.1.1 (X86_64)

we plan to install OEM 10.2.0.5 on X86_64 server and work with R12.1.1 EBS.
does anyone know any patch need apply for both?
Thanks.

Hi,
Please see these docs/links.
Note: 812315.1 - Oracle Application Management Pack for Oracle E-Business Suite, Release 3.0
Applications Management and Change Management Packs Certified with Enterprise Manager Grid Control Release 5
http://blogs.oracle.com/stevenChan/2009/06/amp_acmp_certified_with_emgcr5.html
Regards,
Hussein

Any patch need for Grid control 10.2.0.5 to install Application management

We already have ORACLE Grid Control 10.2.0.5 (X86 version) on Linux server. Due to we have EBS, We plan to install ORACLE Application Management Pack 3.0 into Grid Control 10.2.0.5.
I heard there have patch need apply to Grid Control 10.20.05 before install Application management pack into it. Anyone know which patch?
Thanks.

when you click on the tab "Application Servers" on the far upper left site of the GridControl (right next to Hosts, Databases, ...) then
you will see of which components the Oracle Application server exists (HTTP-server, OC4J, WebCache, ...). Therefore the HTTP-server is just
part of the application server - and if the application server gets shut down it's meant that all components wil get shut down...
HTH

Machine Specs for installing SAP NetWeaver 7.0 - Java Trial version.

Hi,
can we install SAP NetWeaver 7.0 - Java Trial on windows x64 OS/machine or all the trail versions work only on 32 bit OS/machine?
I tried installing SAP NetWeaver 7.0 - Java Trial it on my laptop (Win XP 32 bit) and on a Server (Win 2003 server x64 bit), it failed.
Is SAP NetWeaver 7.0 - Java Trial version specifies any particular configuration on which it will work perfectly fine without any issues?
your help would be highly appreaciated.
thanks,

Only work with 32bits
SAP NetWeaver 7.0 Java Trial Version System Requirements
      Operating System: Windows 2000 (Service Pack 3); Windows XP Professional (Service Pack 1) or Windows Server 2003
      NTFS-File systems
      Internet Explorer 5.5 or higher or Firefox 1.0 or higher
      At least 1 GB RAM, 2 GB are recommended
      Intel Pentium III/1.1 GHz or higher (or compatible)
      14GB free hard disk space (8.6 GB for the installed software and 4.9 GB for the installer software)
      High-resolution monitor (1024x768 or higher, 256 colors)
      Sun Microsystems J2SE SDK version 1.4.2_XX or 1.4.2_XX (Sun JDK 1.5 not tested). You can download this from Sun Microsystems at http://java.sun.com/products/archive/j2se/1.4.2_XX/index.html. Please note that version 1.4.2_10 may cause installation problems.
      If you have already installed SAP products on your computer, you must ensure that none of the systems are called "J2E".
      The file C:\WINNT\system32\drivers\etc\services (Windows 2000) or C:\Windows\system32\drivers\etc\services (Windows XP) must not include an entry for the ports 3601, 3201 and 50000 to 50030. A possible entry can be excluded by using the hash symbol (#).
      If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter. This is described in detail within the contents of the download package.
      To use SAP Interactive Forms by Adobe, you must install the necessary credential file and activatetial file and activate it using a unique password. Download the latest credential and password from SDN.
check the points if i help you

Data needed for upload of PP master data

Hi,
Can any one tell me what all the important things required to upload the PP masterdata for BOM,Routings,Workcenter and Prod Versions.??
Tell me for each master data in detail.
Regard's,
Uday.

Hi,
Normally the data or fields required for the BOM, Routing and PV will be decided based on the Business process mapping.
For ex if your business is having Nonstock, then the item category of the BOM will be N,
So you need to do the business scenario mapping then you can define the BOM and Routing templates and make some field mandatory to be filled in.
Standard SAP
for BOM: Item, Item qty, headrer lot size, Item category etc are required
for Routing: Item, Item base qty, lot sizes, Standard activity type values etc are required.
Thanks,
JK

SAP Cloud for Customer & SAP ECC/CRM OnPremise integration using WebServices!

Hello All,
I would like to ask if anyone has really created a working integration scenario between a Cloud Solution & an ECC/CRM OnPremise solution?
We are trying to build some prototypes for this, however, due to connectivity errors/issues, unable to proceed.
I'm looking for information on:
> What certificates precisely are needed on both Cloud & OnPrem systems?
> What configuration if any is required on Cloud & OnPrem solution, except for communication system/arrangements on Cloud solution?
> Any use case if available from anyone which can demo integration between Cloud solution & ECC/CRM OnPremise solution.
I'd really appreciate responses on this.
Many Thanks
Ankur

Thanks Sathya for the response.
https://scn.sap.com/community/cloud/blog/2013/10/10/new-e-learning-for-i
ntegration-of-sap-cloud-for-customer-with-sap-erp-and-sa
p-crm-now-available : Not working! => Please check & confirm.
Just to give you our background...we are SAP Cloud Partners & VARs, hence we are building few prototypes for Customer Demos & POC.
Per my understanding, its just one of the OnPrem system, either an ECC OnPrem or CRM OnPrem that you can integrate with one C4C tenant at a time, i.e. to one single tenant. In our case, we are trying to integrate ECC OnPrem with C4C system.
We are in the process of deploying SAP PI as the middleware platform for integration between C4C & ECC/CRM OnPrem., which is going to take few more weeks.
SAP HCI will be the other approach, but we are currently not familiar with that, hence we have a trial to start in coming week for SAP HCI, so this is going to take some time as well.
Hence, WebService is the only currently available option for us to build these prototypes, POC for Customer Demos, to show working integration scenarios between ECC OnPrem & C4C system.
We have been facing some technical issues after setting up necessary communication systems/arrangements on C4C system & trying to do a WS call from SDK also we get error when we do a ping test from within C4C system to check connection.
Has SAP developed any WS integration between C4C & either of the ECC or CRM OnPrem system? Or is it just PI & HCI which SAP has for integration?
I'd truly appreciate if you can guide us on creating few integration scenarios (Working ones of course ) using Webservice between C4C & ECC OnPrem system.
Many Thanks
Ankur

Prime Infrastructure 2.0 is not accepting ubf patch file for upload

Hi,
After successfully installing Prime Infrastructure 2.0 on a single server via OVA file in ESX, i tried to install all the latest patches.
- pi_update_2.0-3.zip was installed successful
But for the patch "pi_dev_pack_update_2.0-10.ubf" i was not be able to do the file-upload via the Web-GUI.
Is there anyone who knows how to put this file on the Prime server and how to install this patch via CLI ?
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.6.003-px-build
ADE-OS System Architecture: x86_64
Copyright (c) 2005-2010 by Cisco Systems, Inc.
All rights reserved.
Hostname: xxxxxxx
Version information of installed applications
Cisco Prime Infrastructure
Version : 2.0.0.0.294
Kind regards,
Danjan Mudde.

Hi Danjan,
****These patches cannot be applied via cli and can only be applied from GUI of Prime*****
Go to the link below and download the "pi_dev_pack_update_2.0-10.ubf"
http://software.cisco.com/download/release.html?mdfid=284422771&flowid=45323&softwareid=28
4272933&release=2.0.10&relind=AVAILABLE&rellifecycle=&reltype=all
After downloading the file, go to "Administration > Software Update", click upload
update file, browse to the file location that you've downloaded.
Once the file has beenuploaded, you can select the update and click install.
After installing, it shouldindicate "Pending Restart" = Yes. You will likely need to
go to the cli and do an "ncs stop" and then "ncs start".
Hope it will help
Thanks-
Afroz
[Do rate the useful post]

Is Intraoperative patch need for DB version Upgrade in 11i ?

Dear All,
I need to apply ATG RUP7 in 11i instance, but the database should be greater than 9.2.0.8 version otherwise it is not possible,, Am i correct .
Ok now am Upgrading the DB version to 9.2.0.8 then planning to apply ATG RUP7 , then how the Application will work because the application was running in ebiz release version now upgraded 9.2.0.8. Is there any Intero Patch for application.
Regards
HAMEED

Dear hussien,
Thank u very much,, i have restarted the installation but again failed with some other reason,, now i am not in hurry,, i restored the old backup and released the instance.
Can u explain me,, i failed in the last part of this version upgrade. that is while running "catpatch.sql", yes its known issue but still i failed several times to run successfully.
i am getting error like this below:
The following statement may cause an
ORA - 29554: unhanded Java out of memory condition error
If so, this is because there is insufficient system tablespace,
shared or java pool size, or some other resource value is too small.
An additional message describing the problem will be output of the statement.
PL /SQL procedure successfully completed.first of all i have resized the system tablespace, then i changed the shared_pool_size 150m, previously it was 260M by default, and changed java_pool_size 150M previously it was 64M. then started the database with migrate option and i ran the catpatch.sql.
Obviously it must complete successfully,, but it failed,
note: its EBS database
Regards
HAMEED

Help! Patch needed for printer? Print function crashing programs...

I've had a HP PSC 2410 (an all-in-one) for a few years now--carried over from my PC days. When I got my Powerbook I installed the print-only driver from the HP website and have printed without incident. A couple of days ago I downloaded a driver for this printer which I believed would allow me all of my functionality but the installer has never run properly as my printer does not show up on the list available (none do) so I am unable to complete the guided walk-through. My printer is hooked up to my Airport Express. I have, under limited circumstances, been able to print occasionally since I've downloaded this new driver. More often than not however, whatever program I'm using and trying to print from crashes. Any ideas? I once spoke with an Apple employee who told me I could use this printer but would need a patch, I never thought about it again until this has been happening... Anyone know of such a patch and where to find it? Thanks.
Powerbook G4 Mac OS X (10.3.9)

You don't need the Bing bar for smart print any longer. I'm using IE9 and have uninstalled the Bing bar.

Patch Needed for Windows 64 bit OS for bug number - 9356752 ...OID 11.1.1.6

Hi,
I m doing OID - OAM integration for SSO.
OID 11.1.1.6 (64 bit)
RCU 11.1.1.6 (64 bit)
Oracle DB 11.2.0.3 (64 bit)
Weblogic Server 10.3.6
While installing OID 11.1.1.6
I m getting error during configuration as
[2013-01-19T13:40:42.723+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JlHnUopFk3WFLzvH8A1Gy^Jk00000A,0] Trying to start the component oid1
[2013-01-19T13:40:42.855+05:30] [as] [WARNING] [] [oracle.as.config] [tid: 19] [ecid: 0000JlHnUopFk3WFLzvH8A1Gy^Jk00000A,0] Failed to start component oid1[[
oracle.as.config.ProvisionException: HTTP status code = 400 : The request parameters did not match any components
at oracle.as.config.impl.OracleASComponentBaseImpl.manageProcess(OracleASComponentBaseImpl.java:943)
at oracle.as.config.impl.OracleASComponentBaseImpl.start(OracleASComponentBaseImpl.java:1062
I searched through oracle support ..I got a patch for this issue (bug number 9356752) but its for Linux and Solaris.
Can I get the patch for Windows 64 bit OS or any solution to resolve this issue?
Thanks and Regards,
Yogesh

Hi,
I have faced the same issue when I was installing OID in linux server, but was able to fix the issue with right version of RCU ( I was using RCU 11.1.1.5 with OID 11.1.1.6).
Regards,
Raghav

Patch needed for uploading sap ecc 6.0 country india version

Similar Messages

Maybe you are looking for