Patch of squid version 2.5 stable 2 to squid version 2.6 stable 17

Hi would appreciate if can advice on how can I patch squid version 2.5 to squid version 2.6.
Is re-configuration of squid necessary for upgrade of version 2.5 to version 2.6 ?
Thanks alot in advance

Well it didn't work for me at all!
I was unable to get past POST with 2x Corsair CMX512-3200C2 at 1T 2.5-3-3-6, or even at SPD auto settings. I could only boot with one DIMM, so I quickly wend back to BIOS v1.6.
MSI has got to stop putting me through this! I just recovered from flashing to the infamous 1.8 version, and I really hoped that the 2.1 BIOS would finally solve my ever remaining issues:
No USB mouse on cold boot
Bad temp.sensor calibration at cold boot
Since this BIOS version only makes things worse, and my patience with MSi and the Neo Platinum is running out, I have done something I should have done a long time a go:
I ordered a DFI Lanparty UT nF3 250GB to replace the ms-7030
Thanks for all your help over the last 18 months, but I am pulling down my MSI flag...

Similar Messages

Why don't the Adobe Acrobat 10.1.6 and Adobe Reader 9.5.4 patches update the version on the exe file

Why don't the Adobe Acrobat 10.1.6 and Adobe Reader 9.5.4 patches update the version on the exe file ? My vulnerability reports show these installations are not patched when they really are.

Hi All,
I also facing the same issue with Adobe reader 9.5.4 version update.
Previous Version installed: 9.5.3
AcroRd32.exe - File Version 9.5.3.305
AcroRd32.dll - File version 9.5.3.305
After update installation to 9.5.4, add or remove program shows latest version but exe and dll is not updated. Vulnerability assessment tools based on file version check identifies patch is still missing. Becomes a HEAD ACHE.
Adobe Reader 9 > Help > About Adobe Reader 9 - First shows version 9.5.4, if your click on it instead of showing AGM version next it shows version 9.5.3.305.
I tested for all previous versions of 9x, works fine in each update. Seems like patch is missing codes for updating file versions.
Waiting for an acknowledgement.

Shared library patch for C++ (Version 5)

Hi,
I was atttempting to install StarOffice 5.2 on an UltraSparc10 runnning Solaris 7. Got this message: "Please install the patch 'Shared library patch for C++ (Version 5)' or contact your system administrator." I searched the Sun website for such a patch, and found none. Does anyone know what this is and where to get it?
Thanks, John Craig

you can search for this patch in http://sunsolve.sun.com
the patch number is: 105591-09
[email protected]

Error: ' The Update could not be installed (patch apply failed)' . It keeps trying to install this patch but my version is the latest one!!

I have the latest version of firefox. I know this because your website says so. But for some reason, my current firefox keeps trying to install a new version by "trying" to install a patch. But it fails every time.
I cant say exactly when this started. A few weeks ago, firefox was behaving erratically (crashing for no reason at every launch due to some video plugin fail) but i uninstalled and reinstalled (a few times) and it was fine after the last one.

If files already have been downloaded then remove the files in the updates and updates\0 folder.
You can also delete the active-update.xml file.
*http://kb.mozillazine.org/Updates_reported_when_running_newest_version
Software Update not working properly:
*http://kb.mozillazine.org/Software_Update
* C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates

Anyone else having application freezes with the latest Patch update for Version 5.1.1?

Having major issues with my Iphone Apps after latest patch. Is there anything I can do to get my iPhone applications to install? Everything seems frozen. I have done many system resets and nothing has worked---I'm getting very frustrated.
Thanks!

Reset, Restore, Service. Those are the 3 steps for any device.
Next up: Restore! Enjoy

Is the patch ready for version 37 yet?

Could not run FireFox 37 the pop ups were just awful. I was told to stop using it till a patch was released. Trying to find out if it has been released.

All these are known Malware.
Ads By Name
Powered By Viso
Ads By Compare for Fun
Ads by Portal
cor-el posted information about how to search for and get rid of Malware in general, which show work in your situation. Or you can Google search for '''remove ''Ads By Name''''' and the other three to search for specific removal instructions for each.
Example: http://malwaretips.com/blogs/ads-by-name-removal/

NI Update Service 2.1.0.103 recommends installing LV 2012 f1 patch over later version

Reporting this to NI support people as a possible bug: NI Update Service 2.1.0.103 (which came on the Aug'12 Dev Suite discs) still recommends the LV 2012 f1 patch as an urgent update, even after I installed the f3 patch.
Solved!
Go to Solution.

It's recommending the FPGA patch, not the LabVIEW core patch.
Chris M

Versions and Patches available for XI

Hi,
Can anybody send me the available versions and exact patches for those versions in XI?
Appreciate your response.
Thanks,
Kumar.

Hi,
XI 3.0 = 2004
PI 7.0 = 2004s
and for example
XI 3.0 SP 15 = PI 7.0 SP06
(like in the table provided by Aashish Sinha)
To your question:
XI 2.0 ?
XI 3.0 & PI 7.0:
http://help.sap.com/saphelp_nw04/helpdata/en/c9/9844428e9cbe30e10000000a155106/frameset.htm
PI 7.1 (in ramp up):
/people/daniel.bianchin/blog/2007/12/19/all-you-wanted-to-know-about-sap-netweaver-pi-71-and-more
Regards
Patrick

Clarification on - Oracle Version Update Patch and License Key

Hello,
I am currently using Oracle 9.2.0.4.0 version of oracle database. I want to update it to a higer version or we can say I would like to apply a new higer patch to this version.
My questions are,
1. Is there any new higer patch available for Oracle 9.2.0.4.0?
2. If answer to above question is YES then, is the new patch requires the license key to implement?
I have the license copy of Oracle 9.2.0.4.0.
Do I require the license key to implement the new patch?
Thanks in advance.
Himanshu

Yes the latest patch available on Oracle9i is 9.2.0.7.0 (on windows 32 bit). But in general I think its 9.2.0.6.0. You can check at metalink against the platform you are using.
No I don't think you need a license to apply the patch if you already have one.
HTH
Amar

Version Patching?

I am using 10.1.0.2 on a w2003 server. This version seem to have a lot of bugs. What is the latest version available for w2003 - 10.1.0.4? Do I need to patch my current version to upgrade or I need to download the full program file in order to upgrade my version. If I need the full program, where do I get it? I know where to get the patches - metalink.
Thanks in advance,
Denes

repca 10.1.2 (windows) cannt install repository into
database v10.1.0.3 ... it says "wrong version" ...
but is you install a repository from AS10g 10.1.2 kit
then database v10.1.3 is created ... what is it ?
does it mean any wrong configuration file in repca
kit ?
any ideas ?in the file <home>\repca\config\prerequisitie.xml:
10.1:0.4 => 10.1:0.3
succesfull completition
other solution:
you need copy repository database template from 10gAS kit then to add it to your database home then to create database with this template and register it with repca.

Bootsplash : Applying splash on a patched kernel makes a Kernel Panic

Hi Archers,
I tried to put a bootsplash and for that I first pached the kernel with the PKGBUILD from ABS using this HOW-TO :
http://archlinux.veloxis.de/howtos/boot … to_us.html
The patched kernel works very well.
Then I wanted to add a splash using the splash utility, following this HOW-TO :
http://wiki.archlinux.org/index.php/Bootsplash
Then I edited the grub and rebooted.
All I can see is a kernel panic, telling me this :
RAMDISK : Couldn't find valid RAM disk image starting at 0
List of all partitions :
No file system could mount root, tried :
Kernel Panic - VFS : Unable to mount root fs on unknown block (0,0)
This is quite weird since some lines above I can see that the RAMDISK has been initialized :
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Does anynone have an idea of what could be the cause of the problem ?
Thanks
++++++++++++

I think I've found what is the cause of the problem but this is quite weird.
To activate bootsplash, the bootsplash option have to be activated in the kernel configuration file (config) :
CONFIG_FBCON_SPLASHSCREEN=y
So I added this option at the end of the config file. The other required options were already activated by default.
After having installed the new kernel thanks to the pacman -U command, I can see in the config file, which has been automatically generated during the compilation (/boot/kconfig26), that the bootsplash option is no more activated ! The entire line has been erased.
How can an option be erased during the compilation ? Where could I find what caused this problem ? Here is my PKGBUILD, which I think is correct : (I have deactivated the Arch logo)
# $Id: PKGBUILD,v 1.286 2008/01/15 19:37:50 tpowa Exp $
# Maintainer: Tobias Powalowski <[email protected]>
# Maintainer: Thomas Baechler <[email protected]>
pkgname=kernel26
_basekernel=2.6.23
pkgver=2.6.23.14
pkgrel=3
pkgdesc="The Linux Kernel and modules"
arch=(i686 x86_64)
license=('GPL2')
groups=('base')
url="http://www.kernel.org"
backup=('boot/kconfig26' etc/mkinitcpio.d/${pkgname}.preset)
depends=('coreutils' 'module-init-tools' 'mkinitcpio>=0.5.15')
# pwc, ieee80211 and hostap-driver26 modules are included in kernel26 now
# nforce package support was abandoned by nvidia, kernel modules should cover everything now.
# kernel24 support is dropped since glibc24
replaces=('kernel24' 'kernel24-scsi' 'kernel26-scsi'
'alsa-driver' 'ieee80211' 'hostap-driver26'
'pwc' 'nforce' 'squashfs' 'unionfs' 'ivtv'
'zd1211' 'kvm-modules')
install=kernel26.install
source=(ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-$_basekernel.tar.bz2
ftp://ftp.kernel.org/pub/linux/kernel/v2.6/patch-$pkgver.bz2
### next two lines only needed for rc kernel building
#http://www.kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.23-rc9.bz2
#http://www.kernel.org/pub/linux/kernel/v2.6/snapshots/patch-2.6.23-rc9-git2.bz2
# the main kernel config files
config config.x86_64
# the archlinux boot logos
#logo_linux_clut224.ppm
#logo_linux_mono.pbm
#logo_linux_vga16.ppm
# standard config files for mkinitcpio ramdisk
kernel26.preset
mkinitcpio-$pkgname.conf
# add possibility to load your own dsdt acpi table
acpi-dsdt-initrd-v0.8.4-2.6.21.patch
# fix bluetooth on some toshiba notebooks
toshiba-bluetooth.patch
# add additional unusual usb entry
usb-storage-unusual-devs.patch
# cfs scheduler backport, modified to apply with gregs stable patch
#http://people.redhat.com/mingo/cfs-scheduler/sched-cfs-v2.6.23.8-v24.patch
ftp://ftp.archlinux.org/other/kernel26/sched-cfs-v2.6.23.11-v24.patch
# improve intel macintosh support
mactel-linux-2.6.23.patch
# update to alsa snapshot 20071124
ftp://ftp.archlinux.org/other/kernel26/alsa-20071124.patch.bz2
ftp://ftp.archlinux.org/other/kernel26/alsa-include-20071117.patch.bz2
# fix broken acpi c states on buggy bioses, which violate acpi specification
acpi-buggy-bios.patch
# add squashfs and unionfs
http://heanet.dl.sourceforge.net/sourceforge/squashfs/squashfs3.3.tar.gz
http://download.filesystems.org/unionfs/unionfs-2.x/unionfs-2.1.11_for_2.6.23.9.diff.gz
# two patches below for aufs compatibility
put_filp.patch
lhash-2.6.22.patch
# fix hibernating support for saa7134 devices, implemented in .24 series finally
hibernate-saa7134.diff
# add possibility to undervolt certain cpus
linux-phc-0.3.0-kernel-vanilla-2.6.23rc3.patch
# adding genpatches from gentoo
2405_hostap-netdev-type.patch
# fix Leadtek_WinFast_2000
winfast-2000.patch
bootsplash-3.1.6-2.6.21.diff
build() {
[ "${CARCH}" = "i686" ] && KARCH=i386
[ "${CARCH}" = "x86_64" ] && KARCH=x86_64
cd $startdir/src/linux-$_basekernel
# add upstream patch from 2.6.23 series
patch -Np1 -i ../patch-$pkgver || return 1
# greg kroahs stable patches, in reference to:
# http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
# add them if needed
# add latest CFS scheduler backport
# in reference to lkml:
# By popular demand, here is release -v24 of the CFS scheduler patch.
# It is a full backport of the latest & greatest scheduler code to
# http://people.redhat.com/mingo/cfs-scheduler/
patch -Np1 -i ../sched-cfs-v2.6.23.11-v24.patch || return 1
### next 2 lines are only needed for rc kernels
#patch -Np1 -i ../patch-$pkgver-rc9 || return 1
#patch -Np1 -i ../patch-2.6.23-rc9-git2 || return 1
# add custom acpi dsdt patch, in reference to:
# http://gaugusch.at/kernel.shtml
# http://acpi.sourceforge.net
patch -Np1 -i ../acpi-dsdt-initrd-v0.8.4-2.6.21.patch || return 1
# fix enabling of bluetooth on some toshiba notebooks in reference to:
# http://bugs.archlinux.org/task/5608
# http://www.cwrose.de/toshiba/s5200.html#bluetooth
patch -Np1 -i ../toshiba-bluetooth.patch || return 1
# fix I/O errors with Teac HD-35PU devices
patch -Np1 -i ../usb-storage-unusual-devs.patch || return 1
# get latest alsa status, in reference to:
# ftp://ftp.suse.com/pub/projects/alsa/snapshot/driver/
# patches are created by diffing the kernel source,
# against the alsa-kernel/ directory from tarball.
# status is 20071124
patch -Np0 -i ../alsa-20071124.patch || return 1
patch -Np0 -i ../alsa-include-20071117.patch || return 1
# improve intel macintosh support, in reference to:
# http://www.mactel-linux.org/wiki/Main_Page
# http://mactel-linux.svn.sourceforge.net/viewvc/mactel-linux/trunk/kernel/
patch -Np1 -i ../mactel-linux-2.6.23.patch || return 1
# add possibility to undervolt certain cpus, in reference to:
# https://www.dedigentoo.org/trac/linux-phc/
patch -Np1 -i ../linux-phc-0.3.0-kernel-vanilla-2.6.23rc3.patch || return 1
# fix buggy bios acpi to get c states, which violate acpi specification, in reference to:
# http://bugzilla.kernel.org/show_bug.cgi?id=7578
# http://bugs.archlinux.org/task/6875
patch -Np1 -i ../acpi-buggy-bios.patch || return 1
# fix hibernate support on saa7134
# made by the vl4 team in the kernel plus a lot of
# help from one of the Alsa devs. The problem is that when you suspend to
# ram or to disk, saa7134 devices don't come out of suspend.
# sent in by: Hussam Al-Tayeb <[email protected]>
patch -Np0 -i ../hibernate-saa7134.diff || return 1
# fix Leadtek_WinFast_2000
# in reference to:
# http://www.linuxtv.org/v4lwiki/index.php/Leadtek_WinFast_2000
patch -Np0 -i ../winfast-2000.patch || return 1
# adding some genpatches from gentoo, in reference to:
# http://sources.gentoo.org/viewcvs.py/linux-patches/genpatches-2.6/trunk/2.6.23/
patch -Np1 -i ../2405_hostap-netdev-type.patch || return 1
# add sqashfs support, in reference to:
# http://squashfs.sourceforge.net/
patch -Np1 -i ../squashfs3.3/kernel-patches/linux-2.6.23/squashfs3.3-patch || return 1
# add unionfs support. in reference to:
# http://www.fsl.cs.sunysb.edu/project-unionfs.html
patch -Np1 -i ../unionfs-2.1.11_for_2.6.23.9.diff || return 1
# add put_filp and lhash patches for aufs, in reference to:
# http://aufs.sourceforge.net/
patch -Np0 -i ../put_filp.patch || return 1
patch -Np1 -i ../lhash-2.6.22.patch || return 1
patch -Np1 -i ../bootsplash-3.1.6-2.6.21.diff
# remove the extraversion from Makefile
### next line is only needed for rc kernels
#sed -i 's|^EXTRAVERSION = .*$|EXTRAVERSION =-rc9|g' Makefile
sed -i 's|^EXTRAVERSION = .*$|EXTRAVERSION =|g' Makefile
# Arch logo!
#cp ../logo_linux_clut224.ppm drivers/video/logo/
#cp ../logo_linux_mono.pbm drivers/video/logo/
#cp ../logo_linux_vga16.ppm drivers/video/logo/
if [ "$CARCH" = "x86_64" ]; then
cat ../config.x86_64 >./.config
else
cat ../config >./.config
fi
# build the full kernel version to use in pathnames
. ./.config
### next line is only needed for rc kernels
#_kernver="2.6.23-rc9${CONFIG_LOCALVERSION}"
_kernver="${_basekernel}${CONFIG_LOCALVERSION}"
# load configuration
yes "" | make config
# build!
# stop here
#msg "Stopping build"
#return 1
make bzImage modules || return 1
mkdir -p $startdir/pkg/{lib/modules,boot}
make INSTALL_MOD_PATH=$startdir/pkg modules_install || return 1
cp System.map $startdir/pkg/boot/System.map26
cp arch/$KARCH/boot/bzImage $startdir/pkg/boot/vmlinuz26
install -D -m644 Makefile \
$startdir/pkg/usr/src/linux-${_kernver}/Makefile
install -D -m644 kernel/Makefile \
$startdir/pkg/usr/src/linux-${_kernver}/kernel/Makefile
install -D -m644 .config \
$startdir/pkg/usr/src/linux-${_kernver}/.config
install -D -m644 .config $startdir/pkg/boot/kconfig26
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/include
for i in acpi asm-{generic,i386,x86_64} config linux math-emu media net pcmcia scsi sound video; do
cp -a include/$i $startdir/pkg/usr/src/linux-${_kernver}/include/
done
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers $startdir/pkg/usr/src/linux-${_kernver}
cp -a scripts $startdir/pkg/usr/src/linux-${_kernver}
# fix permissions on scripts dir
chmod og-w -R $startdir/pkg/usr/src/linux-${_kernver}/scripts
#mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/.tmp_versions
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/arch/$KARCH/kernel
cp arch/$KARCH/Makefile $startdir/pkg/usr/src/linux-${_kernver}/arch/$KARCH/
if [ "$CARCH" = "i686" ]; then
cp arch/$KARCH/Makefile.cpu $startdir/pkg/usr/src/linux-${_kernver}/arch/$KARCH/
fi
cp arch/$KARCH/kernel/asm-offsets.s $startdir/pkg/usr/src/linux-${_kernver}/arch/$KARCH/kernel/
# add headers for lirc package
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/drivers/media/video
cp drivers/media/video/*.h $startdir/pkg/usr/src/linux-${_kernver}/drivers/media/video/
for i in bt8xx cpia2 cx25840 cx88 em28xx et61x251 pwc saa7134 sn9c102 usbvideo zc0301; do
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/drivers/media/video/$i
cp -a drivers/media/video/$i/*.h $startdir/pkg/usr/src/linux-${_kernver}/drivers/media/video/$i
done
# add dm headers
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/drivers/md
cp drivers/md/*.h $startdir/pkg/usr/src/linux-${_kernver}/drivers/md
# add inotify.h
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/include/linux
cp include/linux/inotify.h $startdir/pkg/usr/src/linux-${_kernver}/include/linux/
# add CLUSTERIP file for iptables
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/net/ipv4/netfilter/
cp net/ipv4/netfilter/ipt_CLUSTERIP.c $startdir/pkg/usr/src/linux-${_kernver}/net/ipv4/netfilter/
# add wireless headers
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/net/mac80211/
cp net/mac80211/*.h $startdir/pkg/usr/src/linux-${_kernver}/net/mac80211/
# add vmlinux
cp vmlinux $startdir/pkg/usr/src/linux-${_kernver}
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p $startdir/pkg/usr/src/linux-${_kernver}/`echo $i | sed 's|/Kconfig.*||'`
cp $i $startdir/pkg/usr/src/linux-${_kernver}/$i
done
cd $startdir/pkg/usr/src/linux-${_kernver}/include && ln -s asm-$KARCH asm
chown -R root.root $startdir/pkg/usr/src/linux-${_kernver}
find $startdir/pkg/usr/src/linux-${_kernver} -type d -exec chmod 755 {} \;
cd $startdir/pkg/lib/modules/${_kernver} && \
(rm -f source build; ln -sf ../../../usr/src/linux-${_kernver} build)
# install fallback mkinitcpio.conf file and preset file for kernel
install -m644 -D $startdir/src/${pkgname}.preset $startdir/pkg/etc/mkinitcpio.d/${pkgname}.preset || return 1
install -m644 -D $startdir/src/mkinitcpio-$pkgname.conf $startdir/pkg/etc/mkinitcpio.d/$pkgname-fallback.conf || return 1
# set correct depmod command for install
sed -i -e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" $startdir/kernel26.install
echo -e "# DO NOT EDIT THIS FILE\nALL_kver='${_kernver}'" > ${startdir}/pkg/etc/mkinitcpio.d/${pkgname}.kver
# remove unneeded architectures
rm -rf $startdir/pkg/usr/src/linux-${_kernver}/arch/{alpha,arm,arm26,avr32,blackfin,cris,frv,h8300,ia64,m32r,m68k,m68knommu,mips,parisc,powerpc,ppc,s390,sh,sh64,sparc,sparc64,um,v850,xtensa}
I'm a newbie in the kernel world so I'm a little bit lost in all theses files and options.
Thanks
Last edited by jaymz_64 (2008-02-07 12:20:37)

[Patch 정보] TRACKING BUG FOR CUMULATIVE MLR#6 ON TOP OF BPEL PM 10.1.3.3.1

최근에 출시된 BPEL PM 10.1.3.3.1의 통합패치입니다.
아래는 readme.txt에 포함된 patch list입니다.
# WARNING: Failure to carefully read and understand these requirements may
# result in your applying a patch that can cause your Oracle Server to
# malfunction, including interruption of service and/or loss of data.
# If you do not meet all of the following requirements, please log an
# iTAR, so that an Oracle Support Analyst may review your situation. The
# Oracle analyst will help you determine if this patch is suitable for you
# to apply to your system. We recommend that you avoid applying any
# temporary patch unless directed by an Oracle Support Analyst who has
# reviewed your system and determined that it is applicable.
# Requirements:
# - You must have located this patch via a Bug Database entry
# and have the exact symptoms described in the bug entry.
# - Your system configuration (Oracle Server version and patch
# level, OS Version) must exactly match those in the bug
# database entry - You must have NO OTHER PATCHES installed on
# your Oracle Server since the latest patch set (or base release
# x.y.z if you have no patch sets installed).
# - [Oracle 9.0.4.1 & above] You must have Perl 5.00503 (or later)
# installed under the ORACLE_HOME, or elsewhere within the host
# environment.
# Refer to the following link for details on Perl and OPatch:
# http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=189489.1
# If you do NOT meet these requirements, or are not certain that you meet
# these requirements, please log an iTAR requesting assistance with this
# patch and Support will make a determination about whether you should
# apply this patch.
# 10.1.3.3.1 Bundle Patch 6823628
# DATE: March 14, 2008
# Platform Patch for : Generic
# Product Version # : 10.1.3.3.1
# Product Patched : Oracle(R) SOA
# Bugs Fixed by 10.1.3.3.1 Initial patch 6492514 :
# Bug 5473225 - PATCH01GENESIS HOT UNABLE TO CATCH AN EXCEPTION DURING A
# TRANSFORM
# Bug 5699423 - PARTNERLINK PROPERTY THAT SET BPELXPROPERTY FUNCTION DOESN'T
# WORK
# Bug 5848272 - STATEFUL WEBSERVICES DEMO ON OTN DOES NOT WORK 10.1.3.1
# Bug 5872799 - ANT DEPLOY BPEL TEST FAILS/RUNS ON DEFAULT DOMAIN NOT
# SPECIFIED TARGET DOMAIN
# Bug 5883401 - ALLOW A WAY TO CREATE EMPTY NODES - AND USE FOR REQUIRED
# NODES
# Bug 5919412 - SAMPLE DEMO BPEL PROCESSES MIMESERVICE MIMEREQUESTER AXIS
# JAVA EXAMPLE ERROR
# Bug 5924483 - ESB SHOULD SUPPORT SOAP EDNPOINT LOCATION DYNAMIC UDDI LOOKUP
# Bug 5926809 - ORAPARSEESCAPEDXML XPATH EXPRESSION FAILED TO EXECUTE
# FOTY0001 TYPE ERROR
# Bug 5937320 - STRANGE BEHAVIOUR CALLING FROM BPEL TO BPEL GETTING
# NULLPOINTEREXCEPTION.
# Bug 5944641 - BPA BLUEPRINT NOT AVAIALBLE IN JDEVELOPER
# Bug 5945059 - JAVA.LANG.NULLPOINTEREXCEPTION SENDING EMAILS WITH PAYLOADS
# LARGER THAT 1MB
# Bug 5962677 - WS RESPONSE IS EMPTY SOAP BODY IN ONE-WAY CALL
# Bug 5963425 - WHEN THE OUTCOMES FOR A HT CHANGED & IMPORTED - UPDATE
# CONNECTION ROLES IN BPEL
# Bug 5964097 - AQ ADAPTER DEPLOYMENT CAUSES OPMN TO PERFORM A FORCEFUL
# SHUTDOWN IN SOA
# Bug 5971534 - CANNOT GRANT USER TASK VIEWS TO GROUPS, ONLY TO USERS.
# Bug 5989367 - REFER TO SR 6252219.993 BPEL 10.1.3 ONLY COPIES IN ASSIGN,
# IN 10.1.2 IT CREATES
# Bug 5989527 - ENHANCEMENT WARNING SHOULD BE GIVEN UPON UPLOAD IF BPEL
# PROCESS IS OPEN IN ARIS
# Bug 5997936 - ESB FAULT DOES NOT GET PROPAGATED TO BPEL
# Bug 6000575 - PERF NEED ESB PURGE SCRIPT TO PURGE BY DATE AND PROCESS
# Bug 6001796 - POSTING OF DATE RECEIVED FROM XML GATEWAY TO BPEL FAILED IN
# ESB
# Bug 6005407 - BPEL PROCESS DOESN'T PROPOGATE FAULT THROWN BY BPEL
# SUB-PROCESS
# Bug 6017846 - MIMETYPE OF EMAIL NOTIFICATION IS NOT SET THROUGH HUMAN TASK
# Bug 6027734 - DECISION SERVICE IMPORT - LOCATING DECISION SERVICE IN .DECS
# FILE IMPROPER
# Bug 6028985 - EXCEEDED MAXIMUM NUMBER OF SUBSCRIBERS FOR QUEUE
# ORAESB.ESB_CONTROL
# Bug 6041508 - CREATING/UPDATING DVM CAUSE EXCEPTION
# Bug 6053708 - FTP ADAPTER DOES NOT SUPPORT ENCRYPTED PASSWORD IN
# OC4J-RA.XML
# Bug 6054034 - INDEX4,INDEX5 AND INDEX6 CANNOT BE USED IN BPEL CONSOLE
# Bug 6068801 - BACKPORT OF BPEL ON WEBLOGIC - VERSION 10.1.3.3
# Bug 6070991 - HT EXPORT DOES NOT EXPORT PARAMETERS, ALLOW PARTICIPANTS TO
# INVITE OTHERS
# Bug 6071001 - WSIF HTTP BINDING NOT WORKING FROM ESB
# Bug 6073311 - STRESS SCOPE NOT FOUND ON CALLBACK - WRONG (DUPE)
# SUBSCRIPTION IN TABLE
# Bug 6081070 - JMS ADAPTER REJECTION HANDLER CREATE 0 BYTE FILES
# Bug 6083419 - DECISION SERVICE SCOPE NEED TO HAVE A SPECIAL INDICATOR
# Bug 6085799 - HUMAN TASK ADDED IN SCOPE IN JDEV IS NOT UPDATED TO BPA
# SERVER
# Bug 6085933 - EXPORT AND EXPLORE SHOULD USE USER LANGUAGE AND NOT ENGLISH
# ALWAYS
# Bug 6086281 - STRING INDEX OUT OF RANGE ERROR FOR COBOL COPYBOOK WITH PIC
# CLAUSE HAVING S
# Bug 6086453 - DOMAINS CREATED IN A CLUSTER GETS NOT PROPAGATED TO NEW OR
# EXISTING NODES
# Bug 6087484 - MULTIPLE HEADER SETTING CAUSES ESB EXCEPTION
# Bug 6087645 - ESB SHOULD ALLOW USER PICK RUNTIME PROTOCOL (HTTP/HTTPS)
# Bug 6110231 - TRANSLATION NOT BASED ON MQ CCSID CHARSET
# Bug 6120226 - BPEL IS NOT SETTING THE APPS CONTEXT CORRECTLY
# Bug 6120323 - COMPLETIONPERSISTPOLICY ON DOMAIN LEVEL HAS DISAPPEARED
# Bug 6125184 - ESB JMS SESSION ROLLBACK ORACLE.JMS.AQJMSEXCEPTION
# Bug 6127824 - [AIA2.0] CURRENT XREF IMPLEMENTATION IS MISSING REQUIRED
# INDEXES ON XREF SCHEMA
# Bug 6128247 - HTTPCONNECTOR POST() METHOD SHOULD RAISE EXCEPTION FOR ALL
# STATUS CODES EXCEPT 2
# Bug 6131159 - ENABLE USERS TO CHOOSE XSD WHEN CREATING A BPEL PROCESS FROM
# BLUE PRINT
# Bug 6132141 - PROCESS_DEFAULT TABLE STILL CONTAINS INFORMATION FROM
# UNDEPLOYED PROCESSES
# Bug 6133190 - ENABLING ESB CONSOLE HTTP/S IS MAKING THE CONSOLE TO COME UP
# BLANK.
# Bug 6139681 - BPEL WSDL LINK IN CLUSTERED RUNTIME POINTS TO A SINGLE NODE
# Bug 6141259 - BASICHEADERS NOT PUTTING WWW-AUTHENTICATE HEADERS FOR HTTP
# BINDING IN BPEL
# Bug 6148021 - BPEL NATIVE SCHEMA FOR COBOL COPYBOOK WITH IMPLIED DECIMAL
# LOSES DIGIT IN OUTPUT
# Bug 6149672 - XOR DATA - CONDITION EXPRESSION SPECIFICATION IS NOT
# INTUITIVE IN BPMN MODELS
# Bug 6152830 - LOSING CONDITIONAL EXPRESSIONS CREATED IN JDEV UPON MERGE
# Bug 6158128 - BASICHEADERS NOT PUTTING WWW-AUTHENTICATE HEADERS FOR HTTP
# BINDING
# Bug 6166991 - WHEN STARTING SOA SUITE,, PROCESSES FAIL DUE TO UNDEFINED
# WSDL
# Bug 6168226 - LOCATION-RESOLVER EXCEPTION THROWN IN OPMN LOGS
# Bug 6187883 - CHANGES FOR BPEL RELEASE ON JBOSS- VERSION 10.1.3.3
# Bug 6206148 - [AIA2.0] NEW FUNCTION REQUEST, XREFLOOKUPPOPULATEDCOLUMNS()
# Bug 6210481 - BPEL PROCESS WORKS INCORRECTLY WHEN AN ACTIVITY HAS MULTIPLE
# TRANSITIONCONDITION
# Bug 6240028 - WEBSERVICE THAT DOES NOT CHALLENGE FOR BASIC CREDENTIALS
# CANNOT BE INVOKED
# Bug 6257116 - MULTIPLE HEADER SETTING CAUSES ESB EXCEPTION
# Bug 6258925 - MESSAGE RECEIVED BY THE TARGET ENDPOINT VIA HTTP POST IS
# MISSING THE XML HEADER
# Bug 6259686 - TOO MANY UNNECESSARY WORKFLOW E-MAIL NOTIFICATIONS GENERATED
# Bug 6267726 - 10.1.3.3 ORACLE APPLICATIONS ADAPTER - NOT ABLE TO CAPTURE
# BUSINESS EVENT
# Bug 6272427 - WEBSPHERE BPEL FAILS FOR DATA RETRIEVAL OF SIZE 500+ KB
# Bug 6276995 - MERGE SCOPE NAME IS NOT UPDATED WHEN CHANGED IN THE SERVER
# Bug 6280570 - XPATH EXPRESSION ERROR IN MEDIATOR FOR ASSIGNING USER-DEFINED
# CONTEXT VALUES
# Bug 6282339 - RETRYCOUNT DOES NOT WORK PROPERLY
# Bug 6311039 - ONE RECORD IS INSERTED TO SYNC_STORE IF
# COMPLETIONPERSISTPOLICY SET TO FAULTED
# Bug 6311809 - [AIA2.0] NON-RETRYABLE ERRORS ARE NOT POSTED ON ESB_ERROR
# TOPIC
# Bug 6314784 - THE PRIORITY DEFINED IN THE BPA SUITE IS NOT TRANSFERRED TO
# THE JDEV CORRECTLY
# Bug 6314982 - THREADPOOL RACE CONDITION IN ADAPTER INITIALIZATION MESSAGES
# NOT PROCESSED
# Bug 6315104 - (SET)CLASSNAME MISSING IN TSENSOR JAXB OBJECTS
# Bug 6316554 - CONSUME FUNCTIONALITY OF JMS ADAPTER FOR BEA WEBLOGIC DOES
# NOT WORK
# Bug 6316950 - FILEADAPTER HARPER ENHANCEMENTS SYNC WRITE AND CHUNKED
# INTERACTION SPEC
# Bug 6317398 - THE ICON FOR COMPUTING DIFFERENCE IS MISSING IN JDEV REFRESH
# FROM SERVER DIALOG
# Bug 6320506 - IMPORT FAILS WHEN THERE IS AN UNNAMED CASE
# Bug 6321011 - CANNOT PROCESS 0 BYTE FILE USING FTP ADAPTER
# Bug 6325749 - TRACKING BUG FOR TRACKING ADDITIONAL CHANGES TO BUG #6032044
# Bug 6328584 - NEED A NEW XPATH EXPRESSION TO GET ATTACHMENT CONTENT VIA
# SOAP INVOKATION
# Bug 6333788 - COLLAPSING OF CONSECUTIVE ASSIGN TASKS BREAKS BAM SENSOR
# Bug 6335773 - BUILD.XML CONTAINS DO NOT EDIT .. - WHILE <CUSTOMIZE> TASK
# MUST BE IN <BPELC>
# Bug 6335805 - AQ ADAPTER OUTBOUND DOESN'T RECONNECT AFTER FAILURE
# Bug 6335822 - [AIA2.0] PSRPERFESB - RUNTIME DVM PERFORMANCE OVERHEAD IN ABS
# USE CASE
# Bug 6339126 - CHECKPOINT BPEL JAVA METHOD DOESN'T WORK IN BPEL 10.1.3.3
# Bug 6342899 - OUTLINECHANGE.XML NOT UPDATE WITH ACTIVITY FROM NEW BRANCH
# Bug 6343299 - ESB CONCRETE WSDL NAMESPACE SHOULD BE DIFFERENT FROM IMPORTED
# WSDL NAMESPACE
# Bug 6372741 - DEHYDRATION DATABASE KEEPS GROWING IN 10.1.3.3
# Bug 6401295 - NXSD SHOULD SUPPORT ESCAPING THE TERMINATED/QUOTED/SURROUNDED
# DELIMITERS
# Bug 6458691 - DIST DIRECTORY FOR 10.1.3.3.1 NEEDS UPDATE
# Bug 6461516 - BPEL CONSOLE CHANGES FOR DISPLAYING RELEASE 10.1.3.3.1
# Bug 6470742 - CHANGE THE VERSION NUMBER AND BUILD INFO IN ABOUT DIALOG IN
# ESB
# BUG ADDED IN MLR#1, 6671813 :
# Bug 6494921 - ORABPEL-02154 IF LONG DOMAIN AND SUITECASE NAMES IN USE
# BUGS ADDED IN MLR#2, 6671831 :
# Bug 6456519 - ERROR IN BPEL CONSOLE THREADS TAB:SERVLETEXCEPTION CANNOT GET
# DISPATCHER TRACE
# Bug 6354719 - WHICH JGROUP CONFIGURATION PARAMETER IMPACTS BPEL CLUSTER
# ACTIVITY
# Bug 6216169 - SCOPE NOT FOUND ERROR WHILE DELIVERING EXPIRATION MESSAGE OF
# ONALARM
# Bug 6395060 - ORA-01704 ON INSERTING A FAULTED INVOKE ACTIVITY_SENSOR
# Bug 6501312 - DEHYDRATION DATABASE KEEPS GROWING IN 10.1.3.3 #2
# Bug 6601020 - SEARCHBASE WHICH INCLUDES PARENTHESIS IN THE NAMES DOES NOT
# WORK
# Bug 6182023 - WAIT ACTIVITY FAILS TO CONTINUE IN CLUSTER WHEN PROCESSING
# NODE GOES DOWN
# BUGS ADDED IN MLR#3, 6723162 :
# Bug 6725374 - INSTANCE NOT FOUND IN DATASOURCE
# Bug 4964824 - TIMED OUT IF SET CORRELATIONSET INITIATE YES IN REPLY
# ACTIVITY
# Bug 6443218 - [AIA2.0]BPEL PROCESS THAT REPLIES A CAUGHT FAULT AND THEN
# RETHROWS IT IS STUCK
# Bug 6235180 - BPPEL XPATH FUNCTION XP20 CURRENT-DATETIME() IS RETURNING AN
# INCORRET TIME
# Bug 6011665 - BPEL RESTART CAUSES ORABPEL-08003 FAILED TO READ WSDL
# Bug 6731179 - INCREASED REQUESTS CAUSE OUTOFMEMORY ERRORS IN OC4J_SOA WHICH
# REQUIRES A RESTART
# Bug 6745591 - SYNC PROCESS <REPLY> FOLLOWED BY <THROW> CASE CAUSING
# OUTOFMEMORY ERRORS
# Bug 6396308 - UNABLE TO SEARCH FOR HUMAN TASK THAT INCLUDES TASK HISTORY
# FROM PREVIOUS TASK
# Bug 6455812 - DIRECT INVOCATION FROM ESB ROUTING SERVICE FAILS WHEN CALLED
# BPEL PROCESS
# Bug 6273370 - ESBLISTENERIMPL.ONFATALERROR GENERATING NPE ON CUSTOM ADAPTER
# Bug 6030243 - WORKFLOW NOTIFICATIONS FAILING WITHOUT BPELADMIN USER
# Bug 6473280 - INVOKING A .NET 3.0 SOAP SERVICE EXPOSED BY A ESB ENDPOINT
# GIVES A NPE
# BUGS ADDED IN MLR#4, 6748706 :
# Bug 6336442 - RESETTING ESB REPOSITORY DOES NOT CLEAR DB SLIDE REPOSITORY
# Bug 6316613 - MIDPROCESS ACTIVATION AGENT DOES NOT ACTIVATED FOR RETIRED
# BPEL PROCESS
# Bug 6368420 - SYSTEM IS NOT ASSIGNING TASK FOR REAPPROVAL AFTER REQUEST
# MORE INFO SUBMITTED
# Bug 6133670 - JDEV: UNABLE TO CREATE AN INTEGRATION SERVER CONNETION WHEN
# ESB IS ON HTTPS
# Bug 6681055 - TEXT ATTACHMENT CONTENT IS CORRUPTED
# Bug 6638648 - REQUEST HEADERS ARE NOT PASSED THROUGH TO THE OUTBOUND HEADER
# Bug 5521385 - [HA]PATCH01:ESB WILL LOSE TRACKING DATA WHEN JMS PROVIDER IS
# DOWN
# Bug 6759068 - WORKLIST APPLICATION PERFORMANCE DEGRADATION W/ SSL ENABLED
# FOR BPEL TO OVD
# BUGS ADDED IN MLR#5, 6782254 :
# Bug 6502310 - AUTOMATED RETRY ON FAILED INVOKE WITH CORRELATIONSET INIT
# FAILS
# Bug 6454795 - FAULT POLICY CHANGE NEEDS RESTART OF BPEL SERVER
# Bug 6732064 - FAILED TO READ WSDL ERROR ON THE CALLBACK ON RESTARTING BPEL
# OC4J CONTAINER
# Bug 6694313 - ZERO BYTE FILE WHEN REJECTEDMESSAGEHANDLERS FAILS
# Bug 6686528 - LINK IN APPLICATION.XML FILES CHANGED TO HARD LINKS WHEN MORE
# THAN 1 HT PRESENT
# Bug 6083024 - TEXT AND HTML DOC THAT RECEIVED AS ATTACHMENTS WERE EITHER
# BLANK OR GARBLED
# Bug 6638648 - REQUEST HEADERS ARE NOT PASSED THROUGH TO THE OUTBOUND HEADER
# Bug 6267726 - 10.1.3.3 ORACLE APPLICATIONS ADAPTER - NOT ABLE TO CAPTURE
# BUSINESS EVENT
# Bug 6774981 - NON-RETRYABLE ERRORS ARE NOT POSTED ON ESB_ERROR TOPIC
# Bug 6789177 - SFTP ADAPTER DOES NOT SUPPORT RENAMING FILES
# Bug 6809593 - BPEL UPGRADE TO 10.1.3.3.1 WITH ESB CALLS FAILS DUE TO
# CACHING OF PLNK - SERVICE
# BUGS ADDED IN MLR#6, 6823628 :
# Bug 6412909 - <BPELX:RENAME> DOES NOT ADD XMLNS DECLARATION AUTOMATICALLY
# Bug 6753116 - OUTPUT FROM HUMAN TASK IS NOT IS NOT CONSISTENT WITH
# SCHEMA
# ORDERING
# Bug 6832205 - BAD VERIFICATIONSERVICE PERFORMANCE IF LDAP SERVICE HAS HUGE
# DATA
# Bug 6189268 - CALLING BPEL PROCESS VIA SOAP FROM ESB FAILS WITH
# NAMENOTFOUNDEXCEPTION
# Bug 6834402 - JMS ADAPTER IMPROPERLY CASTS XAQUEUESESSION TO QUEUESESSION
# Bug 6073117 - TASK SERVICE DOESN'T RENDER THE TASK ACTIONS
# Bug 6054263 - REUSING SOAP WSDL IN RS CAUSES SOAP ACTION'S NS TO BE
# STRIPPED
# AWAY
# Bug 6489703 - ESB: NUMBER OF LISTENERS > 1 GIVES JMS EXCEPTION UNDER STRESS
# Bug 5679542 - FTP ADAPTER: COULD NOT PARSE TIME:
# JAVA.LANG.STRINGINDEXOUTOFBOUNDSEXCEPTION
# Bug 6770198 - AQ ACTIVATIONINSTANCES >1 DOESN'T WORK IN ESB
# Bug 6798779 - ESB ROUTING RULES CORRUPTED ON RE-REGISTERING WITH ROUTING
# ORDER
# IN WSDL CHANGED
# Bug 6617974 - BACKPORT REQUEST FOR MOVING FILES FUNCTION OF FTP ADAPTER
# Bug 6705707 - VALIDATION ON ESB CAN'T HANDLE NESTED SCHEMAS
# Bug 6414848 - FTP ADAPTER ARCHIVE FILENAME FOR BPEL IS BEING SCRAMBLED
# AFTER
# THE 10.1.3.3 UPGR
# Bug 5990764 - INFORMATION ARE LOST WHEN BPEL PROCESS IS POLLING FOR MAILS
# WITH
# ATTACHEMENTS
# Bug 6802070 - ORA-12899 SUBSCRIBER_ID/RES_SUBSCRIBER COLUMN SMALL FOR LONG
# DOMAIN AND PROCESS
# Bug 6753524 - WRONG SERVICE ENDPOINT OPEN WHEN TEST WEB SERVICE OF ESB
# Bug 6086434 - PROBLEM IN BPEL FILE ADAPTER WHILE READING A FIXED LENGTH
# FILE
# Bug 6823374 - BPEL 10.1.3.3.1 BAM SENSOR ACTION FAILS WITH BAM 11
# Bug 6819677 - HTTS STATUS 202 RETURNED INSTEAD OF SOAP FAULT
# Bug 6853301 - MQ ADAPTER REJECTED MESSAGES IS NOT REMOVED FROM THE RECOVERY
# QUEUE
# Bug 6847200 - 10.1.3.3.1 PATCH (#6748706) HAS STOPPED FTP ADAPTER POLLING
# IN
# SFTP MODE
# Bug 6895795 - AQ OUTBOUND DOESN'T WORK WITH MLR#6
업무에 참고하시기 바랍니다.

David,
You are right, theer are some changes incorporated in the latest MLR # 16 on the configurations files and on the dehydration store metrics(such as performance, fields,..).
However, I would not suggest to continue working on olite, even for Development/Test purposes as you might get stuck with strange errors...and the only solution would be to re-install SOA Suite if your olite gets corrupted. There might be ways to gets your olite back to position, but trust me..its not so simple.
Also, when you develop and stress test all your testcase scenarios in an TEST Adv installation, its simple to mimic the same in actual production box, as you exactly know its behavior.
So, go for a brand new SOA 10.1.3.4 MLR # 5 (or) 10.1.3.3.1 MLR # 16 SOA Suite Advanced installation with Oracle DB 10.2.0.3 as its dehydration store.
Hope this helps!
Cheers
Anirudh Pucha

AAC/MPEG-4 support patch for abcde

I got bored to day and made up this patch for abcde that adds support for AAC using the M4A extension.
It uses FAAC as the encoder and also patches abcde to version 2.2.3
I have not tested it yet so bear with me...i'll post my test results later.
You'll have to manually add the "M4AENCOPTS=" variable to the config
usage is: abcde -o m4a
UPDATED: fixed a plethora of typos
another side note is the fact FAAC must be compiled with mpeg-4 support, the Archlinux package for FAAC isn't, so therefore this could be a problem unless you compile FAAC yourself. I submitted a feature request to get mp4 support added.
the following is the 2.2.0 to 2.2.3 update+AAC patch. I will submit a AAC patch for the newest release to the developers of abcde later on.
--- abcde-old-2.2.0 2005-03-08 12:42:14.000000000 -0500
+++ abcde2 2005-03-08 12:11:07.000000000 -0500
@@ -11,7 +11,7 @@
# Copyright for this work is to expire January 1, 2010, after which it
# shall be public domain.
-VERSION="2.2.0"
+VERSION="2.2.3"
usage ()
@@ -21,7 +21,7 @@
echo "-1 Encode the whole CD in a single file"
echo "-a <action1[,action2]...>"
echo " Actions to perform (cddb,read,normalize,encode,tag,move,playlist,clean)"
-echo "-A Experimental actions (retag, transcode)"
+#echo "-A Experimental actions (retag, transcode)"
echo "-b Batch mode: enable album normalization and nogap encoding"
echo "-c <file>"
echo " Specify a configuration file (overrides system and user config files)"
@@ -366,6 +366,9 @@
mpc)
run_command tagtrack-$1 true
+ m4a)
+ run_command tagtrack-$1 true
+ ;;
esac
done
@@ -489,6 +492,10 @@
## FIXME ## to the encoder ends up empty.
run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
+ m4a)
+ # AAC/MPEG-4 format (.m4a) is done locally, with inline tagging.
+ run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $M4AENCODER $M4AENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -w "$IN" -o "$OUT"
+ ;;
esac
done
# Only remove .wav if the encoding succeeded
@@ -737,6 +744,9 @@
if [ "$INTERACTIVE" = "y" ]; then
while [ "$DONE" != "y" ]; do
read ERASEPLAYLIST
+ if [ "$ERASEPLAYLIST" = "" ]; then
+ ERASEPLAYLIST=e
+ fi
case $ERASEPLAYLIST in
e|E|a|A|k|K) DONE=y ;;
@@ -764,7 +774,7 @@
ARTISTFILE=$(mungefilename "$TRACKARTIST")
# If we want to start the tracks with a given number, we need to modify the
# TRACKNUM value before evaluation
- if [ -n $STARTTRACKNUMBER ] ; then
+ if [ -n "$STARTTRACKNUMBER" ] ; then
# Get the trackpadding from the current track
CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - 1 ))
@@ -843,7 +853,7 @@
cdparanoia|debug)
if [ "$WEHAVEACD" = "y" ]; then
vecho "Querying the CD for audio tracks..."
- TRACKS=$( $CDROMREADER -Q 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
+ TRACKS=$( $CDROMREADER -d $CDROM -Q --verbose 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
CDPARANOIAAUDIOTRACKS="$TRACKS"
else
if [ -f "$ABCDETEMPDIR/status" ] && checkstatus cdparanoia-audio-tracks ; then
@@ -1354,7 +1364,7 @@
EDITCDDB=n
fi
if [ "$EDITCDDB" = "y" ]; then
- CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
+ CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d" " -f1);
# Use the debian sensible-editor wrapper to pick the editor that the
# user has requested via their $EDITOR environment variable
@@ -1387,7 +1397,7 @@
# Some heuristics first. Look at Disc Title, and if it starts with
# "Various", then we'll assume Various Artists
- if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2 -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
+ if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
echo "Looks like a Multi-Artist CD" >&2
VARIOUSARTISTS=y
else
@@ -1470,7 +1480,7 @@
echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
- if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d " " -f 1) ]; then
+ if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d" " -f1) ]; then
# This works but does not have the necessary error checking
# yet. If you are familiar with the CDDB spec
# (see http://www.freedb.org/src/latest/DBFORMAT)
@@ -1577,7 +1587,7 @@
WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
OUTDATA="$ABCDETEMPDIR/track$UTRACKNUM.$OUTPUTTYPE"
if [ -r "$CDDBDATA" ]; then
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d [:cntrl:])
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d [:cntrl:])
echo "Grabbing track $UTRACKNUM: $TRACKNAME..." >&2
else
echo "Grabbing track $UTRACKNUM..." >&2
@@ -1692,6 +1702,7 @@
SPEEXENCODERSYNTAX=default
MPPENCODERSYNTAX=default
NORMALIZERSYNTAX=default
+M4AENCODERSYNTAX=default
OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
# Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
@@ -1738,6 +1749,7 @@
SPEEXENC=speexenc
# mpp (Musepack)
MPPENC=mppenc
+M4AENC=faac
ID3=id3
ID3V2=id3v2
@@ -1773,6 +1785,7 @@
SPEEXENCOPTS=
# mpc
MPPENCOPTS=
+M4AENCOPTS=
ID3OPTS=
ID3V2OPTS=
@@ -2039,6 +2052,7 @@
spx) [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc ;;
mpc) [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc ;;
+ m4a) [ "$M4AENCODERSYNTAX" = "default" ] && M4AENCODERSYNTAX=faac ;;
*) echo "abcde error: Invalid OUTPUTTYPE defined" >&2
exit 1
@@ -2100,6 +2114,12 @@
MPPENCODER="$MPPENC"
esac
+case "$M4AENCODERSYNTAX" in
+ faac)
+ M4AENCODEROPTS="$M4AENCOPTS"
+ M4AENCODER="$M4AENC"
+ ;;
+esac
# and which tagger
@@ -2144,7 +2164,7 @@
${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC}
${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT}
${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED}
- ${NEEDVORBISGAIN+$VORBISGAIN}
+ ${NEEDVORBISGAIN+$VORBISGAIN} $M4AENCODER
do
# Cut off the command-line options we just added in
X=$(echo $X | cut -d' ' -f2)
@@ -2207,37 +2227,6 @@
esac
fi
-if [ "$STRIPDATATRACKS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
- case "$CDROMREADERSYNTAX" in
- cdparanoia|debug)
- # cdparanoia can query the CD, so let's process the TRACKQUEUE list with the results.
- if checkstatus cdparanoia-audio-tracks; then
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-audio-tracks )
- else
- ## FIXME ##
- vecho "Querying the CD to obtain a list of valid audio tracks..."
- $CDROMREADER -Q > $ABCDETEMPDIR/cdparanoia-query 2>&1
- # Obtain a list of valid audio tracks from the results of the query
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-query | egrep '^[[:space:]]+[[:digit:]]' | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
- fi
- # Obtain the track padding value from the before-processing list and pad the CD list
- TRACKNUMPADDING=$( echo $TRACKQUEUE | awk '{print $1}' | tr -d " n" | wc -c )
- for TRACK in $CDTRACKQUEUE ; do
- TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
- PADNEWTRACKQUEUE=$(echo $PADNEWTRACKQUEUE $TRACKNUM)
- done
- CDTRACKQUEUE=$PADNEWTRACKQUEUE
- # Now, compare if the values in the list are valid tracks in the CD
- for TRACK in $TRACKQUEUE; do
- if echo $CDTRACKQUEUE | grep $TRACK >/dev/null ; then
- NEWTRACKQUEUE="$NEWTRACKQUEUE $TRACK"
- fi
- done
- TRACKQUEUE="$NEWTRACKQUEUE"
- esac
-fi
# Create playlist if needed (backgroundable) and start reading in tracks
@@ -2446,7 +2435,7 @@
# TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${UTRACKNUM} + 0))
TRACKNUM=$UTRACKNUM
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2 -d= | tr -d [:cntrl:] | sed 's/ +$//')
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d [:cntrl:] | sed 's/ +$//')
splitvarious
fi
fi
the patches can also be found here http://www2.rudefyet.com:8080/patch
please post any other issues you have

not yet, i'm going to work all the kinks out before i submit it
as of right now I noticed some major typos, on my part, that cause it to fail...i'm working on that right now

Not able to find out the OCT 2012 CPU patch for 11.2.0.3

Hi
I am trying to download the OCT 2012 CPU patch for the 11.2.0.3 to install on Linux x86-64 which is having OS of RHEL 5.7. I am able to get the OCT 2012 PSU patch which include the CPU patch too.
Database 11.2.0.3.4 PSU Patch 14275605, or
GI 11.2.0.3.4 PSU Patch 14275572, or
But I just require only the CPU patch. Can anyone provide me the patch number or some link where I can download the Oracle CPU patch OCT 2012

The given link take to the window where CPU patch for all the quarter available.
The Critical Patch Updates released to date are listed in the following table.
Critical Patch Update Latest Version/Date
Critical Patch Update - October 2012 Rev 1, 16 October 2012
Critical Patch Update - July 2012 Rev 1, 17 July 2012
Critical Patch Update - April 2012 Rev 2, 19 July 2012
If I click on Critical Patch Update - October 2012 its takes to the window for selectin the database version (11.2.0.3). From there it goes to the Patch Set Update and Critical Patch Update October 2012 Availability Document [ID 1477727.1] which I had already checked.
There for the database products it shows the below option.
Table 9 Patch Availability for Oracle Database 11.2.0.3
+*<moderator edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>*+
It doesnt have the sepreate CPU patch. The below CPU patch is for the OC4J. I had a check.
Thanks
SHIYAS M

OMS version 10.2.0.4.2 is not compatible with repository version 10.1.0.4.0

Im trying to start the database enterprise manager and I get this error on the log file:
OMS version 10.2.0.4.2 is not compatible with repository version 10.1.0.4.0 Repository needs to be patched.
Database version is 11.2
O.S. version is: Linux 2.6.9-78.0.0.0.1.ELsmp #1 SMP Fri Jul 25 14:41:56 EDT 2008 i686 i686 i386 GNU/Linux
I use this to upload database and console:
export ORACLE_HOME=/opt/oracle/product/11.2.0/dbhome_1/
export ORACLE_BASE=/opt/oracle/
export ORACLE_SID=orcl
/opt/oracle/product/11.2.0/dbhome_1/bin/lsnrctl start
/opt/oracle/product/11.2.0/dbhome_1/bin/dbstart /opt/oracle/product/11.2.0/dbhome_1/
/opt/oracle/product/11.2.0/dbhome_1/bin/emctl start dbconsole
when I excecute that, I see this on the console:
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://192.168.2.210:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ........... started.
Logs are generated in directory /opt/oracle/product/11.2.0/dbhome_1/machine_one_lega/sysman/log
So I try to go there, and the web browser shows this:
503 Service Unavailable
Service is not initialized correctly. OMS version 10.2.0.4.2 is not compatible with repository version 10.1.0.4.0.
Can you help me find this solution?
thanks

Hi Ingenio,
This problem sometimes occur when the listener is not running, hence connection cannot be done without listener.

Patch of squid version 2.5 stable 2 to squid version 2.6 stable 17

Similar Messages

Maybe you are looking for