Patch Problem from SPS9 to SPS 11
Hello *,
I have the following Problem patching an Enterprise Portal 7.0 from SPS9 to SPS11.
Error during deployment Support Package ADSSAP.
Mar 27, 2007 11:09:47... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Mar 27, 2007 11:09:48... Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Mar 27, 2007 11:09:48... Error: Aborted: development component 'tc/ads/grmg'/'sap.com'/'SAP AG'/'7.0010.20061002104728.0000'/'1', grouped by software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.00.11.0.20070201065700''/'1':
CPO data could not be get.
com.sap.sdm.apiint.serverext.servertype.deployment.DeploymentActionException: Error: Caught the following error or exception: "com.sap.sdm.apiint.serverext.servertype.deployment.DeploymentActionException"
Additional error message is:
Caught exception from deploy service of SAP J2EE Engine. Cannot login to the SAP J2EE Engine using user and password as provided in the Filesystem Secure Store. Enter valid login information in the Filesystem Secure Store using the SAP J2EE Engine Config Tool. For more information, see SAP note 701654.
com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthExceptionWrapper: Wrong security credentials detected while trying to obtain connection to the J2EE Engine.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.checkLoginCredentials.DMAUTHEXC)
Additional error message is:
com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthExceptionWrapper: Wrong security credentials detected while trying to obtain connection to the J2EE Engine.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performAction(DeploymentActionTypes).NO_CPO)
Mar 27, 2007 11:09:48... Info: Starting to save the repository
Mar 27, 2007 11:09:49... Info: Finished saving the repository
Mar 27, 2007 11:09:49... Info: Starting: Update: Selected software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.00.11.0.20070201065700''/'1' updates currently deployed software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.00.9.0.20060810173400''/'1'.
Mar 27, 2007 11:09:49... Error: Aborted: software component 'ADSSAP'/'sap.com'/'SAP AG'/'1000.7.00.11.0.20070201065700''/'1':
Failed deployment of SDAs:
development component 'tc/ads/grmg'/'sap.com'/'SAP AG'/'7.0010.20061002104728.0000'/'1' : aborted
Please, look at error logs above for more information!
Mar 27, 2007 11:09:49... Info: Starting to save the repository
Mar 27, 2007 11:09:50... Info: Finished saving the repository
Mar 27, 2007 11:09:50... Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Mar 27, 2007 11:09:50... Error: ---------------- At least one of the Deployments failed ---------------
Any idea?
Regards Ingo
Hi Ingo,
your passwords are not the same in the j2ee and filesystem secure store.
You can find the secure store in config tool.
You may need to verify your sdm password too to be sure.
Brad
Similar Messages
-
Error patching KM from SP14 - SP15
Anyone else experiencing this problem when patching KM from 14 to 15?
Jan 3, 2006 1:47:39 PM Info: Starting: Update: Selected development component 'com.sap.netweaver.bc.wf.db'/'sap.com'/'SAP AG'/'6.15015.20051214125420.0000' updates currently deployed development component 'com.sap.netweaver.bc.wf.db'/'sap.com'/'SAP AG'/'6.140.20050920124553.0000'.
Jan 3, 2006 1:47:39 PM Info: Creating connections to database "J2E".
Jan 3, 2006 1:47:39 PM Info: Creating vendor connection to database.
Jan 3, 2006 1:47:39 PM Info: Vendor connection created successfully.
Jan 3, 2006 1:47:39 PM Info: Creating openSQL connection to database.
Jan 3, 2006 1:47:40 PM Info: OpenSQL connection created successfully.
Jan 3, 2006 1:47:43 PM Info: <!--LOGHEADER[START]/-->
Jan 3, 2006 1:47:43 PM Info: <!--HELP[Manual modification of the header may cause parsing problem!]/-->
Jan 3, 2006 1:47:43 PM Info: <!--LOGGINGVERSION[1.5.3.7186 - 630]/-->
Jan 3, 2006 1:47:43 PM Info: <!--NAME[D:usrsapJ2EJC00SDMprogramlogjddilog20060103134740.log]/-->
Jan 3, 2006 1:47:43 PM Info: <!--PATTERN[jddilog20060103134740.log]/-->
Jan 3, 2006 1:47:43 PM Info: <!--FORMATTER[com.sap.dictionary.database.dbs.DbTraceFormatter(%s %m %-30l %24d)]/-->
Jan 3, 2006 1:47:43 PM Info: <!--ENCODING[Cp1252]/-->
Jan 3, 2006 1:47:43 PM Info: <!--LOGHEADER[END]/-->
Jan 3, 2006 1:47:43 PM Info:
Jan 3, 2006 1:47:43 PM Info: E R R O R ******* (DbModificationManager)
Jan 3, 2006 1:47:43 PM Info: 13:47:40 2006-01-03 dbs-Error: Table KMC_BP_I18N_PROP: Conversion currently not possible
Jan 3, 2006 1:47:43 PM Info:
Jan 3, 2006 1:47:43 PM Info: E R R O R ******* (DbModificationManager)
Jan 3, 2006 1:47:43 PM Info: 13:47:41 2006-01-03 dbs-Error: Table KMC_OBJCACHE_METAO: Conversion currently not possible
Jan 3, 2006 1:47:43 PM Error: Aborted: development component 'com.sap.netweaver.bc.wf.db'/'sap.com'/'SAP AG'/'6.15015.20051214125420.0000':
No further description found.
Jan 3, 2006 1:47:43 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Jan 3, 2006 1:47:43 PM Error: ---------------- At least one of the Deployments failed ---------------
I did find an almost exact hit when doing a note search (note 812079) but the hit was concerned with patching from SP13 -> SP14. It also said in the note that this was fixed in SP14, but it appears that the problem has re-asserted itself in SP15.
I just thought I would check here first to see if anyone has a solution before opening an OSS ticket...We did get a similar problem when patching EP from SP11 to SP15.
<i>
Jan 20, 2006 10:27:47... Info: Starting: Update: Selected development component 'com.sap.portal.activityreport.db'/'sap.com'/'SAP AG'/'61515.20051212183515.0000' updates currently deployed development component 'com.sap.portal.activityreport.db'/'sap.com'/'SAP AG'/'611.20050210161803.0000'.
Jan 20, 2006 10:27:47... Info: Creating connections to database "P1I".
Jan 20, 2006 10:27:47... Info: Creating vendor connection to database.
Jan 20, 2006 10:27:47... Info: Vendor connection created successfully.
Jan 20, 2006 10:27:47... Info: Creating openSQL connection to database.
Jan 20, 2006 10:27:47... Info: OpenSQL connection created successfully.
Jan 20, 2006 10:27:52... Info: <!LOGHEADER[START]/>
Jan 20, 2006 10:27:52... Info: <!HELP[Manual modification of the header may cause parsing problem!]/>
Jan 20, 2006 10:27:52... Info: <!LOGGINGVERSION[1.5.3.7186 - 630]/>
Jan 20, 2006 10:27:52... Info: <!NAME[I:\usr\sap\P1I\JC00\SDM\program\log\jddilog20060120102747.log]/>
Jan 20, 2006 10:27:52... Info: <!PATTERN[jddilog20060120102747.log]/>
Jan 20, 2006 10:27:52... Info: <!FORMATTER[com.sap.dictionary.database.dbs.DbTraceFormatter(%s %m %-30l %24d)]/>
Jan 20, 2006 10:27:52... Info: <!ENCODING[Cp1252]/>
Jan 20, 2006 10:27:52... Info: <!LOGHEADER[END]/>
Jan 20, 2006 10:27:52... Info:
Jan 20, 2006 10:27:52... Info: E R R O R ******* (DbModificationManager)
Jan 20, 2006 10:27:52... Info: 10:27:52 2006-01-20 dbs-Error: Table WCR_WEBCONTENTSTAT: Conversion currently not possible
Jan 20, 2006 10:27:52... Error: Aborted: development component 'com.sap.portal.activityreport.db'/'sap.com'/'SAP AG'/'61515.20051212183515.0000':
No further description found.
Jan 20, 2006 10:27:53... Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Jan 20, 2006 10:27:53... Error: -
At least one of the Deployments failed -
</i>
Have already opened an OSS but they are slow to answer ....
If anyone knows more - please let us know. -
Cloud Control 12c patching problem
Hi,
I have uploaded in the Software Library 14335896 and 6880880 patches.
I have created a new plan that includes the following patches:
14335896 and 6880880
When I analyze the plan the output gives the the following messages:
Output Log
[Oct 15, 2012 5:01:16 PM] PatchDownloadJob Exception, while creating the Patch Component in Software library: COULD_NOT_DOWNLOAD_PATCH_IN_OFFLINE_MODE
PREREQ_NAME: Check Patch Downloading
PREREQ_DESC: Check if patch downloading succeeds
PREREQ_TYPE:PATCH_STATE
PREREQ_STATUS:FAILED
PREREQ_MESG: Fail to download patch(es) from My Oracle Support.
Please notice that I am in Offline mode and I have tried to delete everything (also purging from the Software Library) and recreate from the scratch.
Any ideas???
Thank you
Edited by: user11369597 on Oct 22, 2012 12:29 AMis there already a solution or an SR for that ?
I have the same problem.
I don't understand Oracle at all. They provide an offline patch which tries to download from Oracle Support !?
I have uploaded the manually downloaded patch and the metadata xml file. So far so good. But trying to deploy the patch, the Cloud Control console tries again to download the already uploaded patch (uploaded to my software library).
Ingreadible. -
hi
i am facing data from problem from dso to cube
i am getting daat into dso
plant material doc_num itemno qty
p1 m1 1 1 10
p1 m1 1 2 20
dso i am uisng key fields
doc_no
item_no
doc_year
data fields
material
plant
qty
while loading data into cube
its showing only
p1 m1 1 2 20
item 1 is missing
there is no iten num filed in my target field?
ple let me know ur idea.Hi,
The problem is in your ODS/DSO.
In your ODS you have 'Doc_num' as key field.
For both Items 1 & 2, you have same key field ( Doc_Num) Value.
So, the first record will be over written by the second one. So from your ODS you will get only the latest record to the Cube.
If you want to send both doc_nums to cube, you need to bring doc_num to the data fields area of ODS.
Hope this helps.
Cheers
Praveen -
I have set up my new iPad 2 on my computer (Windows 7), but experienced syncing problems from the start. It seems that although my iPad is regognized in iTunes as it appears there, it only gives met the options to set up as a new iPad or restore from the backup, no synching options. What do I do?
File>Devices>Transfer Purchases will transfer the itunes purchases to your ocmputer.
You should sync your ipod to your computer regularly. -
Communication problem from the vpn-anyconnect to easy-vpn-remote
Hi Team,
I have a communication problem from the vpn-anyconnect to easy-vpn-remote, I´ll explain better bellow and see the attached
topology:
1) VPN Tunnel between HQ to Branch Office - That´s OK
2) VPN Tunnel between Client AnyConnect to HQ - That´s OK
The idea is that the Client Anyconnect is to reach the LAN at Branch Office, but did not reach.
The communication is stablished just when I start a session (icmp and/or rdp) from Branch Office to the Client AnyConnect,
in this way, the communication is OK, but just during a few minutes.
Could you help me?
Bellow the IOS version and configurations
ASA5505 Version 8.4(7)23 (headquarters)
ASA5505 Version 8.4(7)23 (Branch)
**************** Configuration Easy VPN Server (HQ) ****************
crypto dynamic-map DYNAMIC-MAP 5 set ikev1 transform-set ESP-AES-256-SHA
crypto map outside-link-2_map 1 ipsec-isakmp dynamic DYNAMIC-MAP
crypto map outside-link-2_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside-link-2_map interface outside-link-2
access-list ACL_EZVPN standard permit 10.0.0.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.1.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.50.0 255.255.255.0
access-list ACL_EZVPN standard permit 10.10.0.0 255.255.255.0
group-policy EZVPN_GP internal
group-policy EZVPN_GP attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ACL_EZVPN
nem enable
tunnel-group EZVPN_TG type remote-access
tunnel-group EZVPN_TG general-attributes
default-group-policy EZVPN_GP
tunnel-group EZVPN_TG ipsec-attributes
ikev1 pre-shared-key *****
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup
**************** Configuration VPN AnyConnect (HQ) ****************
webvpn
enable outside-link-2
default-idle-timeout 60
anyconnect-essentials
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect profiles Remote_Connection_for_TS_Users disk0:/remote_connection_for_ts_users.xml
anyconnect enable
tunnel-group-list enable
access-list split-tunnel standard permit 192.168.1.0 255.255.255.0
access-list split-tunnel standard permit 192.168.15.0 255.255.255.0
access-list split-tunnel standard permit 10.0.0.0 255.255.255.0
group-policy clientgroup internal
group-policy clientgroup attributes
wins-server none
dns-server value 192.168.1.41
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value ipconnection.com.br
webvpn
anyconnect keep-installer installed
anyconnect ssl rekey time 30
anyconnect ssl rekey method ssl
anyconnect profiles value Remote_Connection_for_TS_Users type user
anyconnect ask none default anyconnect
tunnel-group sslgroup type remote-access
tunnel-group sslgroup general-attributes
address-pool vpnpool
authentication-server-group DC03
default-group-policy clientgroup
tunnel-group sslgroup webvpn-attributes
group-alias IPConnection-vpn-anyconnect enable
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookupHi,
the communication works when you send traffic from easyvpn branch side because it froms the IPSEC SA for local subnet and anyconnect HQ pool. The SA will only form when branch initiates the connection as this is dynamic peer connection to HQ ASA.
when there no SA between branch and HQ for this traffic, HQ ASA has no clue about where to send the traffic from anyconnect to branch network.
I hope it explains the cause.
Regards,
Abaji. -
User provisioning problem from OIM 10g to Siebel CRM
Hi Team,
I am facing User provisioning problem from OIM 10g to Siebel CRM.Please find the log details.
Running Get Attribute Mapping
Running Siebel Create User
<com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException>
at com.siebel.om.conmgr.Connection.readPacket(Connection.java:550)
at com.siebel.om.conmgr.Connection.run(Connection.java:286)
at java.lang.Thread.run(Thread.java:619)
[CMGR FATAL] Error: <com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException> connection:1
<com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException>
at com.siebel.om.conmgr.Connection.readPacket(Connection.java:550)
at com.siebel.om.conmgr.Connection.run(Connection.java:286)
at java.lang.Thread.run(Thread.java:619)
[CMGR FATAL] Error: <com.siebel.common.common.CSSException>
<Error><ErrorCode>8716601</ErrorCode> <ErrMsg>Socket had incorrect word size: 0.(SBL-JCA-00313)</ErrMsg></Error>
</com.siebel.common.common.CSSException> connection:1ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.utils.SiebelConnection : createSiebelConnection() : Siebel Connection Exception:Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.proxy.SiebelProxyEmployeeProvisionManager : createSiebelConnection() : BaseException: Siebel Connection JDB Exception: Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],com.thortech.xl.integration.siebel.provision.SiebelUtilEmployeeProvisionManager : createEmployee() : BaseException: Siebel Connection JDB Exception: Could not open a session in 4 attempts. {1}(SBL-JCA-00200)
ERROR,22 Aug 2013 12:58:27,689,[XL_INTG.SIEBEL],====================================================
Regards,
Ravi.Hi
I facing the same error message as yours, using OIM 11g R2
Are you able solve it ?
Please share
Many Thanks !!! -
Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP
Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP
E1EDK14 occurs 4 times in the source sys:
1 E1EDK14-QUALF = '014'
E1EDK14-ORGID = 'YP01' <= purchase organization
2 E1EDK14-QUALF = '009'
E1EDK14-ORGID = '001' <= purchase group
3 E1EDK14-QUALF = '013'
E1EDK14-ORGID = 'NB' <= document type
4 E1EDK14-QUALF = '011'
E1EDK14-ORGID = 'C999' <= company code
I always want to copy "E1EDK14-ORGID = '001'" to PORDCR102-PUR_GROUP.
I have a solution which works but not perfect:
E1EDK14-ORGID=>copyvalue[1]=>PORDCR102-PUR_GROUP
I want to have the perfect mapping as follow:
IF E1EDK14-QUALF = '009'.
E1EDK14-ORGID = '001' => PORDCR102-PUR_GROUP
ENDIF.
I did it in the data flow editor as follow:
/PORDCR102/IDOC/E1PORDCR1/E1BPMEPOHEADER/PUR_GROUP=
ifWithoutElse([keepss=false]stringEquals
(removeContexts(/ORDERS05/IDOC/E1EDK14/QUALF=),
const([value=009])), /ORDERS05/IDOC/E1EDK14/ORGID=)
But the result in the target sys is always 'YP0'(The first E1EDK14-ORGID)
How to solve this problem?
Thanks
ming yuHi,
Try like this.
E1EDK14-QUALF --------
Constant(009) ---------------- EqualsS ---------------
And(Boolean Function) ------ IfWithoutElse -- PORDCR102-PUR_GROUP
E1EDK14-ORGID ------- E1EDK14-ORGID ----------------
Constant(001) -------------- EqualsS ------------------
Regards,
P.Venkat -
SMC not getting suggested patch info from Update Manager in Solaris 10
Hi All,
why SMC not getting suggested patch info from Update Manager in Solaris 10??
Thank you in advance.Hi All,
why SMC not getting suggested patch info from Update Manager in Solaris 10??
Thank you in advance. -
Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.
It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier! -
Whenever I try to download or redox load an app, a sign says I need to sign in. I do, but it then says I have a billing problem from an earlier purchase and I don't have money on the card so I can't put anything even though I tried. How can I get rid of the card on my ipod??
Sounds like you have an outstanding balance. You have to pay that of before you can make purchases, even free ones. Add a valid payment method to your account
Why can’t I select None when I edit my payment information?
If you want to contact iTunes
Contact iTunes -
Hi,
When I run my report, its perfectly working fine with all the data, subtotals, grand totals etc.
But when I print the ALV by clicking the PRINT Button on the Standard tool bar, My first subtotals are printing correctly. From second, its printing ZEROES and my grand totals are printing double the number as I see on the output.
This is strange and am not able to understand why I get those errors.
ANy pointers please.
Thanks,
Kiran
Edited by: kiran dasari on Sep 9, 2009 1:04 AMHi Roger,
I am using Function Module "REUSE_ALV_HIERSEQ_LIST_DISPLAY"
I am displaying a hierarchical ALV with subtotals, page-breaks & grand totals.
The strange thing is that my first SUBtotal gets printed properly. Its the problem from the second subtotal onwards.
Finally, the grand totals also a problem(Doubling when i print first time and triplling,if i print 2nd time ...and so on...)
ANy more clues please.
Thanks,
Kiran D -
Error when patching portal from SP10 to SP12
Hi
When we do patching portal from SP10 to SP12 JSPM ended with following error for the Software component CAF12_0-10003464.SCA failed deployment
Part of log
development component 'caf/km.proxies'/'sap.com'/'MAIN_APL70VAL_C'/'1219136'/'5', grouped by software component 'CAF'/'sap.com'/'MAIN_APL70P12_C'/'1000.7.00.12.2.20070918080147''/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Exception while preparing deploy of application sap.com/caf~km.proxies..
Reason: com/sap/engine/services/webservices/jaxrpc/wsdl2java/ServiceBaseServer; nested exception is:
java.lang.NoClassDefFoundError: com/sap/engine/services/webservices/jaxrpc/wsdl2java/ServiceBaseServer
Loader Info -
ClassLoader name: [sap.com/caf~km.proxies]
Please let me know do we need to undeploye CAF old deployments if yes what are the components I need to ndeploy
Thanks in Advance
NutakkiIt could be that you are missing an SCA file or check the permissions of the .SCA files. Make sure JSPM is updated to SP12. Also check if you are running out of diskspace, check under ...../JSPM/tmp and .... /JSPM/log
Regards
Shaji -
Video transfer problem from pc to ipad A1219
video transfer problem from pc to ipad A1219
ArinC
You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " Using iPad " where it may get a more rapid response from your fellow users.
best luck
ÇÇÇ -
I have a problem, from system test says: Error 4mem/61/400000000:0x8444fb98, I know how you can solve.
If you have Apple Care for that computer, give them a call: Apple's Customer Support - in the US, (800) 767-2775
If you're not sure how to handle the situation, consider walking your MB into the nearest Apple Store and asking someone there to take a look, etc.
Good luck in any case.
Maybe you are looking for
-
How to show Html5 created in eclipse and link to any cloud application like c4C through HCP
Hi Experts, How to show Html5 created in eclipse and link to any cloud application like C4C through HCP Regards, Vijay.
-
Hi all, We have finished the creation of the production client 300 on the BI Dev server. How do i make the connections From the server to ERP Dev 300. Thanks
-
Hi friends Can i use a hashed table in table view of htmlb. I tried it and i get the error <b>500 SAP Internal Server Error Error message: Type conflict in the ASSIGN statement in the program CL_HTMLB_TABLEVIEW============CP . ( type of termination
-
I have a new vehicle with Ford Sync with my ford touch technology and am thinking of getting the iPhone 5 my current phone is not capable of sending or receiving text messages via Bluetooth in my vehicle is the iPhone 5 capable of doing this
-
My wife and I have 2010 versions of the iMac, mine is 6 month newer. 10.8.3 loads fine on mine, fails on hers. No error messages. Any suggestions?