Patch SAPKH60013 is taking too much time.

Dear Export,
We are applying patch SAPKH60013 in our development server.
it is stuck on "tp user check OK". Earlier we Applied SAPKH60012 within
one hour, but SAPKH60013 is running more than hours.
After that we
1.Stop the SPAM
2.Run the stattistics
3.again Run SPAM but it is stuck on "tp user check OK".
Kindly revert with helpful suggestions ASAP
Regards,
Ajit

Also check:
- if you see a process on the OS running (tp or R3trans)
- if there is any RDD* job running in the system
- the logs in /usr/sap/trans/log for errors
Search for "transport" or "import" and "hanging", there is lots of stuff here, as this happens quite often and there are tons of different causes for it.
Regards, Michael

Similar Messages

Taking too much time incollecting in business content activation

Hi all,
I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
What can be the reason for it.
Please help..

Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des.

Importing is taking too much time (2 DAYS)

Dear All,
I'm Importing below support packages together in a queue @ SAP Solution manger 4 .
SAPKB70015             Basis Support Package 15 for 7.00
SAPKA70015             ABA Support Package 15 for 7.00
SAPKITL426             ST 400: Patch 0016, CRT for SAPKB70015
SAPKIBIIP6             BI_CONT 703: patch 0006
SAPKIBIIP7             BI_CONT 703: patch 0007
SAPKIBIIP8             BI_CONT 703: patch 0008
SAPK-40010INCPRXRPM    CPRXRPM 400: patch 0010
SAPK-40011INCPRXRPM    CPRXRPM 400: patch 0011
SAPK-40012INCPRXRPM    CPRXRPM 400: patch 0012
SAPKIPYJ7E             PI_BASIS 2005_1_700: patch 0014
SAPKW70016             BW Support Package 16 for 7.00
importing is taking too much time (2 DAYS) in main import phase, I have seen SLOG, there are many rows " I am waiting 1 sec and 6 sec . and also checked transaction code STMS all support packages imported except one support package "SAPKW70016 "
Please advice.
Best Regards'
HE

Hello Mohan,
The DBTABLOG table does get large, the best is to switch off logging. If that's not possible, increase the frequency of your delete job, also explore one more alternative have a look at the archival object: BC_DBLOGS, you could archive old records (in accordance with your customer's data retention policies) to reduce the size of the table.
Also, have a look at the following notes, they will advise you on how to improve the performance of your delete job:
Note 531923 - Audit Trail: Indexes on table DBTABLOG
Note 579980 - Table logs: Performance during access to DBTABLOG
Regards,
Siddhesh

Combining clob taking too much time - need help

Hello,
I want to append clob values into another clob value like
declare
v_temp clob;
v_c1_temp clob;
cursor c1 as select clob_data from t;
-- here t table contains clob_data column holding clob data
-- t table have more then 1500 rows
begin
v_temp := '';
open c1 into v_c1_temp;
loop
v_temp := v_temp + v_c1_temp; --------- combining clob (concat may be used)
end loop;
close(c1);
end;
above part also repeats in outer loop (not shown here)
my problem is :- it is taking too much time - you dont believe 90% more time due to that concatenation.
is it any smart way to do same thing?
It will be very helpful to me.

Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des.

Auto Invoice Program taking too much time : problem with update sql

Hi ,
Oracle db version 11.2.0.3
Oracle EBS version : 12.1.3
Though we have a SEV-1 SR with oracle we have not been able to find much success.
We have an auto invoice program which runs many times in the day and its taking too much time since the begining . On troubleshooting we have found one query to be taking too much of the time and seek suggestion on how to tune it. I am attaching the explain plan for the for same. Its an update query. Please guide.
Plan
UPDATE STATEMENT ALL_ROWSCost: 0 Bytes: 124 Cardinality: 1
50 UPDATE AR.RA_CUST_TRX_LINE_GL_DIST_ALL
27 FILTER
26 HASH JOIN Cost: 8,937,633 Bytes: 4,261,258,760 Cardinality: 34,364,990
24 VIEW VIEW SYS.VW_NSO_1 Cost: 8,618,413 Bytes: 446,744,870 Cardinality: 34,364,990
23 SORT UNIQUE Cost: 8,618,413 Bytes: 4,042,339,978 Cardinality: 34,364,990
22 UNION-ALL
9 FILTER
8 SORT GROUP BY Cost: 5,643,052 Bytes: 3,164,892,625 Cardinality: 25,319,141
7 HASH JOIN Cost: 1,640,602 Bytes: 32,460,436,875 Cardinality: 259,683,495
1 TABLE ACCESS FULL TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 154,993 Bytes: 402,499,500 Cardinality: 20,124,975
6 HASH JOIN Cost: 853,567 Bytes: 22,544,143,440 Cardinality: 214,706,128
4 HASH JOIN Cost: 536,708 Bytes: 2,357,000,550 Cardinality: 29,835,450
2 TABLE ACCESS FULL TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 153,008 Bytes: 1,163,582,550 Cardinality: 29,835,450
3 TABLE ACCESS FULL TABLE AR.RA_CUSTOMER_TRX_LINES_ALL Cost: 307,314 Bytes: 1,193,526,000 Cardinality: 29,838,150
5 TABLE ACCESS FULL TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 132,951 Bytes: 3,123,197,116 Cardinality: 120,122,966
21 FILTER
20 SORT GROUP BY Cost: 2,975,360 Bytes: 877,447,353 Cardinality: 9,045,849
19 HASH JOIN Cost: 998,323 Bytes: 17,548,946,769 Cardinality: 180,916,977
13 VIEW VIEW AR.index$_join$_027 Cost: 108,438 Bytes: 867,771,256 Cardinality: 78,888,296
12 HASH JOIN
10 INDEX RANGE SCAN INDEX AR.RA_CUSTOMER_TRX_N15 Cost: 58,206 Bytes: 867,771,256 Cardinality: 78,888,296
11 INDEX FAST FULL SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 62,322 Bytes: 867,771,256 Cardinality: 78,888,296
18 HASH JOIN Cost: 748,497 Bytes: 3,281,713,302 Cardinality: 38,159,457
14 TABLE ACCESS FULL TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 154,993 Bytes: 402,499,500 Cardinality: 20,124,975
17 HASH JOIN Cost: 519,713 Bytes: 1,969,317,900 Cardinality: 29,838,150
15 TABLE ACCESS FULL TABLE AR.RA_CUSTOMER_TRX_LINES_ALL Cost: 302,822 Bytes: 716,115,600 Cardinality: 29,838,150
16 TABLE ACCESS FULL TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 149,847 Bytes: 1,253,202,300 Cardinality: 29,838,150
25 TABLE ACCESS FULL TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 157,552 Bytes: 5,158,998,615 Cardinality: 46,477,465
41 SORT GROUP BY Bytes: 75 Cardinality: 1
40 FILTER
39 MERGE JOIN CARTESIAN Cost: 11 Bytes: 75 Cardinality: 1
35 NESTED LOOPS Cost: 8 Bytes: 50 Cardinality: 1
32 NESTED LOOPS Cost: 5 Bytes: 30 Cardinality: 1
29 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_LINES_ALL Cost: 3 Bytes: 22 Cardinality: 1
28 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_LINES_U1 Cost: 2 Cardinality: 1
31 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUSTOMER_TRX_ALL Cost: 2 Bytes: 133,114,520 Cardinality: 16,639,315
30 INDEX UNIQUE SCAN INDEX (UNIQUE) AR.RA_CUSTOMER_TRX_U1 Cost: 1 Cardinality: 1
34 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 3 Bytes: 20 Cardinality: 1
33 INDEX RANGE SCAN INDEX AR.RA_CUST_TRX_LINE_GL_DIST_N6 Cost: 2 Cardinality: 1
38 BUFFER SORT Cost: 9 Bytes: 25 Cardinality: 1
37 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 3 Bytes: 25 Cardinality: 1
36 INDEX RANGE SCAN INDEX AR.RA_CUST_TRX_LINE_GL_DIST_N1 Cost: 2 Cardinality: 1
49 SORT GROUP BY Bytes: 48 Cardinality: 1
48 FILTER
47 NESTED LOOPS
45 NESTED LOOPS Cost: 7 Bytes: 48 Cardinality: 1
43 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 4 Bytes: 20 Cardinality: 1
42 INDEX RANGE SCAN INDEX AR.RA_CUST_TRX_LINE_GL_DIST_N6 Cost: 3 Cardinality: 1
44 INDEX RANGE SCAN INDEX AR.RA_CUST_TRX_LINE_GL_DIST_N1 Cost: 2 Cardinality: 1
46 TABLE ACCESS BY INDEX ROWID TABLE AR.RA_CUST_TRX_LINE_GL_DIST_ALL Cost: 3 Bytes: 28 Cardinality: 1
As per oracle , they had suggested multiple patches but that has not been helpful. Please suggest how do i tune this query. I dont have much clue of query tuning.
Regards

Hi Paul, My bad. I am sorry I missed it.
Query as below :
UPDATE RA_CUST_TRX_LINE_GL_DIST LGD SET (AMOUNT, ACCTD_AMOUNT) = (SELECT /*+ index(rec1 RA_CUST_TRX_LINE_GL_DIST_N6) ordered */ NVL(LGD.AMOUNT, 0) - ( SUM(LGD2.AMOUNT) - ( DECODE(LGD.GL_DATE, REC1.GL_DATE, 1, 0) * CTL.EXTENDED_AMOUNT ) ), NVL(LGD.ACCTD_AMOUNT, 0) - ( SUM(LGD2.ACCTD_AMOUNT) - ( DECODE(LGD.GL_DATE, REC1.GL_DATE, 1, 0) * DECODE(:B2 , NULL, ROUND( CTL.EXTENDED_AMOUNT * NVL(CT.EXCHANGE_RATE,1), :B3 ), ROUND( ( CTL.EXTENDED_AMOUNT * NVL(CT.EXCHANGE_RATE,1) ) / :B2 ) * :B2 ) ) ) FROM RA_CUSTOMER_TRX_LINES CTL, RA_CUSTOMER_TRX CT, RA_CUST_TRX_LINE_GL_DIST LGD2, RA_CUST_TRX_LINE_GL_DIST REC1 WHERE CTL.CUSTOMER_TRX_LINE_ID = LGD2.CUSTOMER_TRX_LINE_ID AND CTL.CUSTOMER_TRX_ID = CT.CUSTOMER_TRX_ID AND LGD.CUSTOMER_TRX_LINE_ID = CTL.CUSTOMER_TRX_LINE_ID AND LGD2.ACCOUNT_SET_FLAG = 'N' AND REC1.CUSTOMER_TRX_ID = CT.CUSTOMER_TRX_ID AND REC1.ACCOUNT_CLASS = 'REC' AND REC1.LATEST_REC_FLAG = 'Y' AND NVL(LGD.GL_DATE, TO_DATE( 2415021, 'J') ) = NVL(LGD2.GL_DATE, TO_DATE( 2415021, 'J') ) GROUP BY CTL.CUSTOMER_TRX_LINE_ID, REC1.GL_DATE, CTL.EXTENDED_AMOUNT, CTL.REVENUE_AMOUNT, CT.EXCHANGE_RATE ), PERCENT = (SELECT /*+ index(rec2 RA_CUST_TRX_LINE_GL_DIST_N6) */ DECODE(LGD.ACCOUNT_CLASS || LGD.ACCOUNT_SET_FLAG, 'SUSPENSEN', LGD.PERCENT, 'UNBILLN', LGD.PERCENT, 'UNEARNN', LGD.PERCENT, NVL(LGD.PERCENT, 0) - ( SUM(NVL(LGD4.PERCENT, 0)) - DECODE(REC2.GL_DATE, NVL(LGD.GL_DATE, REC2.GL_DATE), 100, 0) ) ) FROM RA_CUST_TRX_LINE_GL_DIST LGD4, RA_CUST_TRX_LINE_GL_DIST REC2 WHERE LGD.CUSTOMER_TRX_LINE_ID = LGD4.CUSTOMER_TRX_LINE_ID AND REC2.CUSTOMER_TRX_ID = LGD.CUSTOMER_TRX_ID AND REC2.CUSTOMER_TRX_ID = LGD4.CUSTOMER_TRX_ID AND REC2.ACCOUNT_CLASS = 'REC' AND REC2.LATEST_REC_FLAG = 'Y' AND LGD4.ACCOUNT_SET_FLAG = LGD.ACCOUNT_SET_FLAG AND DECODE(LGD4.ACCOUNT_SET_FLAG, 'Y', LGD4.ACCOUNT_CLASS, LGD.ACCOUNT_CLASS) = LGD.ACCOUNT_CLASS AND NVL(LGD.GL_DATE, TO_DATE( 2415021, 'J') ) = NVL(LGD4.GL_DATE, TO_DATE( 2415021, 'J') ) GROUP BY REC2.GL_DATE, LGD.GL_DATE ), LAST_UPDATED_BY = :B1 , LAST_UPDATE_DATE = SYSDATE WHERE CUST_TRX_LINE_GL_DIST_ID IN (SELECT /*+ index(rec3 RA_CUST_TRX_LINE_GL_DIST_N6) */ MIN(DECODE(LGD3.GL_POSTED_DATE, NULL, LGD3.CUST_TRX_LINE_GL_DIST_ID, NULL) ) FROM RA_CUSTOMER_TRX_LINES CTL, RA_CUSTOMER_TRX T, RA_CUST_TRX_LINE_GL_DIST LGD3, RA_CUST_TRX_LINE_GL_DIST REC3 WHERE T.REQUEST_ID = :B5 AND T.CUSTOMER_TRX_ID = CTL.CUSTOMER_TRX_ID AND (CTL.LINE_TYPE IN ( 'TAX','FREIGHT','CHARGES','SUSPENSE' ) OR (CTL.LINE_TYPE = 'LINE' AND CTL.ACCOUNTING_RULE_ID IS NULL )) AND LGD3.CUSTOMER_TRX_LINE_ID = CTL.CUSTOMER_TRX_LINE_ID AND LGD3.ACCOUNT_SET_FLAG = 'N' AND REC3.CUSTOMER_TRX_ID = T.CUSTOMER_TRX_ID AND REC3.ACCOUNT_CLASS = 'REC' AND REC3.LATEST_REC_FLAG = 'Y' AND NVL(T.PREVIOUS_CUSTOMER_TRX_ID, -1) = DECODE(:B4 , 'INV', -1, 'REGULAR_CM', T.PREVIOUS_CUSTOMER_TRX_ID, NVL(T.PREVIOUS_CUSTOMER_TRX_ID, -1) ) GROUP BY CTL.CUSTOMER_TRX_LINE_ID, LGD3.GL_DATE, REC3.GL_DATE, CTL.EXTENDED_AMOUNT, CTL.REVENUE_AMOUNT, T.EXCHANGE_RATE HAVING ( SUM(NVL(LGD3.AMOUNT, 0)) <> CTL.EXTENDED_AMOUNT * DECODE(LGD3.GL_DATE, REC3.GL_DATE, 1, 0) OR SUM(NVL(LGD3.ACCTD_AMOUNT, 0)) <> DECODE(LGD3.GL_DATE, REC3.GL_DATE, 1, 0) * DECODE(:B2 , NULL, ROUND( CTL.EXTENDED_AMOUNT * NVL(T.EXCHANGE_RATE,1), :B3 ), ROUND( ( CTL.EXTENDED_AMOUNT * NVL(T.EXCHANGE_RATE,1) ) / :B2 ) * :B2 ) ) UNION SELECT /*+ index(rec5 RA_CUST_TRX_LINE_GL_DIST_N6) INDEX (lgd5 ra_cust_trx_line_gl_dist_n6) index(ctl2 ra_customer_trx_lines_u1) */ TO_NUMBER( MIN(DECODE(LGD5.GL_POSTED_DATE||LGD5.ACCOUNT_CLASS|| LGD5.ACCOUNT_SET_FLAG, 'REVN', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'REVY', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'TAXN', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'TAXY', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'FREIGHTN', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'FREIGHTY', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'CHARGESN', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'CHARGESY', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'UNEARNY', LGD5.CUST_TRX_LINE_GL_DIST_ID, 'UNBILLY', LGD5.CUST_TRX_LINE_GL_DIST_ID, NULL ) ) ) FROM RA_CUST_TRX_LINE_GL_DIST LGD5, RA_CUST_TRX_LINE_GL_DIST REC5, RA_CUSTOMER_TRX_LINES CTL2, RA_CUSTOMER_TRX T WHERE T.REQUEST_ID = :B5 AND T.CUSTOMER_TRX_ID = REC5.CUSTOMER_TRX_ID AND CTL2.CUSTOMER_TRX_LINE_ID = LGD5.CUSTOMER_TRX_LINE_ID AND REC5.CUSTOMER_TRX_ID = LGD5.CUSTOMER_TRX_ID AND REC5.ACCOUNT_CLASS = 'REC' AND REC5.LATEST_REC_FLAG = 'Y' AND (CTL2.LINE_TYPE IN ( 'TAX','FREIGHT','CHARGES','SUSPENSE') OR (CTL2.LINE_TYPE = 'LINE' AND (CTL2.ACCOUNTING_RULE_ID IS NULL OR LGD5.ACCOUNT_SET_FLAG = 'Y' ))) GROUP BY LGD5.CUSTOMER_TRX_LINE_ID, LGD5.GL_DATE, REC5.GL_DATE, LGD5.ACCOUNT_SET_FLAG, DECODE(LGD5.ACCOUNT_SET_FLAG, 'N', NULL, LGD5.ACCOUNT_CLASS) HAVING SUM(NVL(LGD5.PERCENT, 0)) <> DECODE( NVL(LGD5.GL_DATE, REC5.GL_DATE), REC5.GL_DATE, 100, 0) )
I understand that this could be a seeded query but my attempt is to tune it.
Regards

Initramfs too slow and ISR taking too much time !

On my SMP (2 core with 10siblings each) platform i have a PCIe deivce which is a video card which does DMA transfers to the application buffers.
This works fine with suse13.1 installed on a SSD drive.
When i took the whole image and created it as a initramfs and running from it (w/o any hdd) the whole system is very slow and i am seeing PCIe ISRs taking too much time and hecne the driver is failing !
any help on this is much appreciated.
there is a first initramfs iage which is the usual initrd the opensuse installs and i patched it to unpack the second initramfs (full rootfs of 1.8GB) in to RAM (32GB) as tmpfs and exec_init from it.
Last edited by Abhayadev S (2015-05-21 16:28:38)

Abhayadev S,
Although your problem definitely looks very interesting, we can't help with issues with suse linux.
Or are you considering to test archlinux on that machine ?

Sites Taking too much time to open and shows error

hi,
i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
does not open any page or central admin site and shows following error
event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error.

This usually happens if you are low on hardware requirements. Check whether your machine confirms with the required software and hardware requirements.
https://technet.microsoft.com/en-us/library/cc262485.aspx
http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
Please remember to up-vote or mark the reply as answer if you find it helpful.

Taking too much time to load application

Hi,
I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
I have another 10g server (same version) in which the same application is loading very fast.
When I checked the apache error logs found this :-
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
[Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
[Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
[Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
[Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
[Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
[Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
[Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
Please HELP ME...

Hi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

stop the download if it's stalled, and restart your download.

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

SAP GUI taking too much time to open transactions

Hi guys,
i have done system copy from Production to Quality server completely.
after that i started SAP on Quality server, it is taking too much time for opening SAP transactions (it is going in compilation mode).
i started SGEN, but it is giving time_out errors. please help me on this issue.
MY hardware details on quality server
operating system : SuSE Linux 10 SP2
Database : 10.2.0.2
SAP : ECC 6.0 SR2
RAM size : 8 GB
Hard disk space : 500 GB
swap space : 16 GB.
regards
Ramesh

Hi,
>i started SGEN, but it is giving time_out errors. please help me on this issue.
You are supposed to run SGEN as a batch job and so, it should be possible to get time out errors.
I've seen Full SGEN lasting from 3 hours on high end systems up to 8 full days on PC hardware...
Regards,
Olivier

Taking too much time in Rules(DTP Schedule run)

Hi,
I am Scheduling the DTP which have filters to minimize the load data.
when i run the DTP it is taking too much time in the "rules" (i can see the DTP monitor ststus package by pakage and step by step like "Start routine" "rules" and "End Routine")
here it is consuming too much time in Rules Mapping.
what is the problem and any solutions please...
regards,
sree

Hi,
Time taken at "rules" depends on the complexity involved there in ur routine. If it is a complex calculation it will take time.
Also check ur DTP batch settings, ie how many no. of background processes used to perform DTP, Job class.
U can find these :
goto DTP, select goto menu and select "Settings for Batch Manager".
In the screen increase no of Processes from 3 to higher no(max 9).
ChaNGE job class to 'A'.
If ur DTP is still running , cancel it ie Kill the DTP, delete from the Cube,
Change these settings and run ur DTP one more time.
U can observer the difference.
Reddy

Taking too much time using BufferedWriter to write to a file

Hi,
I'm using the method extractItems() which is given below to write data to a file. This method is taking too much time to execute when the number of records in the enumeration is 10000 and above. To be precise it takes around 70 minutes. The writing pauses intermittently for 20 seconds after writing a few lines and sometimes for much more. Has somebody faced this problem before and if so what could be the problem. This is a very high priority work and it would be really helpful if someone could give me some info on this.
Thanks in advance.
public String extractItems() throws InternalServerException{
try{
               String extractFileName = getExtractFileName();
               FileWriter fileWriter = new FileWriter(extractFileName);
               BufferedWriter bufferWrt = new BufferedWriter(fileWriter);
               CXBusinessClassIfc editClass = new ExploreClassImpl(className, mdlMgr );
System.out.println("Before -1");
               CXPropertyInfoIfc[] propInfo = editClass.getClassPropertyInfo(configName);
System.out.println("After -1");
          PrintWriter out = new PrintWriter(bufferWrt);
System.out.println("Before -2");
          TemplateHeaderInfo.printHeaderInfo(propInfo, out, mdlMgr);
System.out.println("After -2");
XDItemSet itemSet = getItemsForObjectIds(catalogEditDO.getSelectedItems());
Enumeration allitems = itemSet.allItems();
System.out.println("the batch size : " +itemSet.getBatchSize());
XDForm frm = itemSet.getXDForm();
XDFormProperty[] props = frm.getXDFormProperties();
System.out.println("Before -3");
bufferWrt.newLine();
long startTime ,startTime1 ,startTime2 ,startTime3;
startTime = System.currentTimeMillis();
System.out.println("time here is--before-while : " +startTime);
while(allitems.hasMoreElements()){
String aRow = "";
XDItem item = (XDItem)allitems.nextElement();
for(int i =0 ; i < props.length; i++){
     String value = item.getStringValue(props);
     if(value == null || value.equalsIgnoreCase("null"))
          value = "";
                         if(i == 0)
                              aRow = value;
                         else
                              aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --new: " +startTime1);
bufferWrt.write(aRow.toCharArray());
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
startTime3 = System.currentTimeMillis();
System.out.println("time here is--after-while : " +startTime3);
               out.close();//added by rosmon to check extra time taken for extraction//
bufferWrt.close();
fileWriter.close();
System.out.println("After -3");
return extractFileName;
catch(Exception e){
               e.printStackTrace();
throw new InternalServerException(e.getMessage());

Hi fiontan,
Thanks a lot for the response!!!
Yeah!! I kow it's a lotta code, but i thought it'd be more informative if the whole function was quoted.
I'm in fact using the PrintWriter to wrap the BufferedWriter but am not using the print() method.
Does it save any time by using the print() method??
The place where the delay is occurring is the wile loop shown below:
            while(allitems.hasMoreElements()){
            String aRow = "";
                XDItem item = (XDItem)allitems.nextElement();
                for(int i =0 ; i < props.length; i++){
                     String value = item.getStringValue(props);
     if(value == null || value.equalsIgnoreCase("null"))
          value = "";
                         if(i == 0)
                              aRow = value;
                         else
                              aRow += ("\t" + value);
startTime1 = System.currentTimeMillis();
System.out.println("time here is--before-writing to buffer --out.flush() done: " +startTime1);
bufferWrt.write(aRow.toCharArray());
out.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.flush();//added by rosmon to check extra time taken for extraction//
bufferWrt.newLine();
startTime2 = System.currentTimeMillis();
System.out.println("time here is--after-writing to buffer : " +startTime2);
What exactly happens is that after a few loops it just seems to sleep for around 20 seconds and then again starts off and ............it goes on till the records are done.
Please do lemme know if you have any idea as to why this is happening !!!!! This bug is giving me the scare.
thanks in advance

Taking too much time (1min) to connect to database

Hi,
I have oracle 10.2 and 10g application server.
Its taking too much time to connect to database through application (on browser). The connection through sqlplus is fine.
Please share your experience.
Regards,
Naseer

Dear AnaTech,
i am going to ask not related this question which already you answered i am going to ask you about that how to connect forms6i and Developer 10g with OracleAS.
i have installed and working Developer Suite 10g Ver. 10.1.2 and also Form Builder 6i. On my other machine i installed and working Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and also on the database machine i installed Oracle Enterprise Manager 10g Application Server Control 10.1.2.0.2.
my database conectivity with Developer suite Forms and Reports and also Form6i and Reports6i are working fine. no problem.
now the 1 question of mine is that when i try to run form6i through run from web i got this error. FRM-99999: error 18121 occured see the release not.
this and the main question of mine is this that how can i control my OracleAS 10g with forms because basically the functionality of OracleAS is Mid-Tier but i am not utilizing the Mid-tier i am using here Two-tier Envrionment even i installed 3-Tier Environment so tell me how i utilize it with 3-Tier..
I hope you don't mind that i ask this question here and also if you give me you email then we can discuss this in detail and i can be helpful of your great expertise. i also know and utilize my 3-tier real envrionment.
Waiting for your great response.
Regards,
K.J.J.C

Taking too much time and not connecting to ipad software server

taking too much time and not connecting to ipad software server and not updating.. why

because everyone is doing the same thing you are... be patient, and you will get the update... I had to grab the update over 3G (it won't let you download or install, but it got me in the door) and then switch back to wifi and download and install.

Patch SAPKH60013 is taking too much time.

Similar Messages

Maybe you are looking for