Patch Set 1 for 9ids expected when ?

Does someone know when the first patch set for 9ids will be released ?

Hello,
The ESTIMATED release date of 9IDS patch set 1 is end of October.
Regards

Similar Messages

Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.

Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik

ETA for 9.2.0.2 PATCH SET for NT

When we gonna have 9.2.0.2 PATCH SET for NT ??
sjarif

There is a thread for this in the OLAP forum, release was due on 8th Nov but has been pushed back to the 15th Nov, so we should see it by early December!

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

Latest patch set for oracle client 8.1.7

hello,
what is the latest patch set exactly for oracle 8.1.7.xx? I know that this version is desupported but I need this client for a third party application that we have in use.
thanks
katharina

Patch 2376472 is the latest patch set for 8.1.7 which will bring you up to 8.1.7.4. It is still available on Metalink.

Oracle 9.2.0.3.0 patch set for windows - questions

Hi!
I have for that some questions. I have oracle 9.2.0.1.0 on a windows 2003 server running with one local database - no real apllication cluster.
I don't understand which instructions I have to make for oracle upgrade?
Must I also make the 3. instruction? Connect to databse prior and drop?
Must I also make the post install action for my database?
(startup migrate ...)
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?
Thanks for help!
1. When applying this patchset on Windows NT, XP or Windows 2000, you must log onto the system as a user with Administrative privileges
(e.g. as a user which is a member of the local Administrators group).
2. Unzip the downloaded patch set file into a new directory.
3. Drop the xmlconcat function by running the following commands:
drop public synonym xmlconcat;
drop function xmlconcat;
4. Shut down any existing Oracle Server instances in the ORACLE_HOME to be patched with normal or immediate priority. i.e.: Shutdown all instances (cleanly). Stop the database services, and stop all listener, agent and other Oracle processes running in or against the ORACLE_HOME to be installed into.
5. Perform the following pre-install steps for Real Application Clusters (RAC) enviroments only:
IN ADDITION TO STOPPING ALL ORACLE SERVICES IN THE ORACLE_HOME TO BE UPGRADED:
If you are running in a RAC enviroment, stop the following Windows service(s)/devices(s) using the Net Stop command:
Stop the Windows service named "OracleGSDService"
Stop the Windows service named "OracleCMService9i".
Stop the Windows device named "OraFenceService" (This Device does NOT show up as a Service in the Control Panel).
For Example:
C:\>net stop OracleGSDService
C:\>net stop OracleCMService9i
C:\>net stop OraFenceService
Once the above steps have been performed on all the nodes of the cluster, you should then be able to upgrade the OSD components to the 9.2.0.3 versions. This can be accomplished by...
xcopy all the files in the \Disk1\preinstall_rac\osd\*.* directory to the directory in which the OSD components were originally installed on all nodes(typically %SystemRoot%\system32\osd9i).
Note: You may also be able to look in HKEY_LOCAL_MACHINE\Software\Oracle\OSD9i registry key to determine the directory in which the original OSD components were installed. Now the OSD components can be restarted on all the nodes in the cluster.
C:\>net start OraFenceService
C:\>net start OracleCMService9i
C:\>net start OracleGSDService
After all of the above steps have been completed on all the nodes of the cluster, you are now ready to proceed with the Oracle 9.2.0.3.0 patchset installation.
6. Start the installer:
If the current Installer version is less than 2.2.0.18.0 then download the Installer 2.2.0.18.0 from Oracle Metalink where it can be accessed with the bug number 2878462 and choosing the MS Windows NT/2000 Server platform, then run the setup.exe 2.2.0.18.0 from the C:\Program Files\Oracle\oui\install directory .
7. You may install the Patch Set through either an interactive or a silent installation.
To perform an interactive installation using the Oracle Universal Installer graphical interface:
1. Start the installer from the newly installed OUI 2.2.0.18.0 by running the version of setup.exe located at C:\Program Files\Oracle\oui\install and verify
that the version of the OUI GUI is 2.2.0.18.0 before proceeding.
2. Follow the steps given below within the installer:
1. On the Welcome screen, click the Next button. This will display the File Locations screen.
2. Click the Browse button for the Source... entry field and navigate to the stage directory where you unpacked
the Patch Set tar file.
3. Select the products.jar file. Click the Next button
The products file will be read and the installer will load the product definitions.
The products to be loaded will be displayed (verify ORACLE_HOME setting for this first).
4. Verify the products listed and then click on the Install button.
5. Once the installation has completed successfully, it will display End of Installation. Click on Exit and confirm
to exit the installer.
To perform a silent installation requiring no user intervention:
1. Copy the response file template provided in the response directory where you unpacked the Patch
Set tar file.
2. Edit the values for all fields labeled as "<Value Required>" according to the comments and examples
in the template.
3. From the unzipped patchset installation area, start the installer by running the setup executable passing
as the last argument the full path of the response file template you have edited locally with your own
value of ORACLE_HOME and FROM_LOCATION:
setup.exe -silent -responseFile <full_path_to_your_response_file>
Post Install Actions
Execute these "Post Install Actions" only if you have one or more databases associated to the upgraded $ORACLE_HOME.
Important Notes
1: Java VM and XML DB Requirements
Users who have JVM (Java enabled) or JVM and XDB installed on their 9.2.0.1 databases should make sure that the init.ora parameters shared_pool_size and java_pool_size are each 150 MB or more before running the catpatch.sql upgrade script. Failure to do so could result in an unrecoverable memory failure during running of the script. Please note that JVM and XML DB was shipped as part of the default 9.2.0.1 seed database and will be present unless the user explicitly installed a 9.2.0.1 instance without them.
2: SYSTEM table space
If you have JServer installed in the database, you should check to be sure there is at least 10M of free space in the SYSTEM table space before running these actions.
3: Installing on Cluster Databases
If you are applying this patch set to a cluster database, then set the CLUSTER_DATABASE initialization parameter to false. After the post-install actions are completed, you must set this initialization parameter back to true.
To complete the installation of this patch set, you need to start up each database associated with the upgraded $ORACLE_HOME, start the database listener (e.g., lsnrctl start), login using SQL*Plus (e.g., sqlplus "/ as sysdba"), and run the following commands/scripts in order from $ORACLE_HOME within a MIGRATE session. If you are using the OLAP option, make sure that the database listener is up.
startup migrate
spool patch.log
@rdbms/admin/catpatch.sql
spool off
Review the patch.log file for errors and re-run the catpatch script after correcting any problems
shutdown
startup
This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this in multiprocessor machines:
@rdbms/admin/utlrp.sql
Execute the following if you use Oracle OLAP option:
alter user olapsys identified by <password> account unlock
connect olapsys/<password>
@cwmlite/admin/cwm2awmd.sql
exit
Execute the following script only if you have version 9.2.0.1.0 of Oracle Internet Directory installed in your ORACLE_HOME. Make sure that the database and database listener are running and that all parameters are specified prior to running the script:
$ORACLE_HOME/bin/oidpatchca.bat
-connect <Connect String>
-lsnrport <Listener Port>
-systempwd <SYSTEM Password>
-odspwd <ODS Password>
-sudn <Super-User DN>
-supwd <Super-User Password>
-dippwd <Password to register DIP Server>
Where:
connect - Database connect string
lsnrport - Database Listener port
systempwd - Password of the database 'SYSTEM' user
odspwd - Password of the database 'ODS' user
sudn - Super-user DN
supwd - Super-user Password
dippwd - New password to register Directory Integration Server. This password must conform to the password policy in the OID server
Execute the following steps only is you are using the RMAN catalog.:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;

I don't understand which instructions I have to make for oracle upgrade?
-- You have to follow all the instructions mentioned
(Just check for few if's for Cluster enabled, OID and OLAP databases. Perform these steps only if they apply)
Must I also make the 3. instruction? Connect to databse prior and drop?
-- Yes you should do
Must I also make the post install action for my database?
(startup migrate ...)
-- Yes. Do run catpatch.sql .
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
-- In this step make sure you do step 1
1: Java VM and XML DB Requirements
Otherwise catpatch.sql will fail.
Do 2 and 3 only if applicable
Chandar
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?

Patch set for 10.2.0.1

Hi,
Oracle Version :10.2.0.1
Operating System: RHEL-5 (64-bit)
Can any one please give me the patch set no to upgarde database from 10.2.0.1 to 10.2.0.3.
Thanks & Regards,
Pooran Prasad.S
Edited by: SIDDABATHUNI on Aug 25, 2011 1:32 PM

All my production databases are on 10.2.0.3 so i am planing to upgrade from 10.2.0.1 to 10.2.0.3The way I used to do this .... If I have applied the 10.2.0.3 Patchset to a database earlier, I have the Patchset downloaded and still available somewhere on disk (on a database server, a file server, a desktop .....)
So, if you've patched it , you've got it with you !
There may be times when you may not be able to download the patch again (it is no longer available for download, your internet connection is flaky, oracle support's site is down ....). That is why having the base oracle software and the patch present is a good practice.
I know OS administrator's do the same. They keep Linux installers ready onsite.
Hemant K Chitale

10.1.0.3 patch set for JDBC bugs?

I researched metalink and found reported 10.1.0.2 JDBC bugs with fixes on 10.1.0.3 patch set. I can't find this patch set. We are currently running 10.1.0.2 JDBC driver over 8.1.7 database. I would like to know how to apply the 10.1.0.3 fixes on the JDBC driver.
Has anyone got the 10.1.0.3 patch set? Where can I get it?
How do I get 10.1.0.3 fixes for JDBC driver only?
Thanks.

Hi Laurent,
Apologies for the delay responding to your feedback.
The Document to which you refer does not appear to be listed on the pages my group maintains at: http://www.oracle.com/technology/documentation/index.html
We are not actually part of the OTN group.
Therefore, please try the Members Feedback forum instead at: Community Feedback (No Product Questions)
Thanks and regards,
Les

Install the latest patch set for Oracle 10.2.0.4.0

I install SAP PI 7.1 EHP1 on Windows Server 2008 (RC1).
I already installed Oracle DB software 10.2.0.4.0
Now I would like to install the latest set for Oracle 10.2.0.4.0
I downloaded the following files from Service Marketplace:
- p8559467_10204_MS_WINX8664.zip
-p7592030_10204_WIN_GENERIC.zip
- Opatch_10204_Generic_v5.zip
- and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
Question:
1) What is the procedure/order to install the patch set?
2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
Thank you!

> - p8559467_10204_MS_WINX8664.zip
> -p7592030_10204_WIN_GENERIC.zip
> - Opatch_10204_Generic_v5.zip
> - and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
That one is for updates 10.2.0.<4 to 10.2.0.4. Since you are already on 10.2.0.4 that one is no more necessary.
> 1) What is the procedure/order to install the patch set?
> 2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
See Note 1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4
Basically you will
- patch Opatch
- unzip the patch to a directory where <sid>adm has access
- stop all Oracle Services
- then execute opatch apply
Markus

Applying oracle patch set for Oracle 10.2.0.4

Hi All,
I need some clarification on below suggestions from SAP,
<div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
It is mandatory to install the most current available SBP in SAP environments.</div>
I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
Regards,
Ramesh.

ramesh_basis wrote:
Hi All,
>
> I need some clarification on below suggestions from SAP,
>
> <div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
> SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
> It is mandatory to install the most current available SBP in SAP environments.</div>
>
> I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
>
> I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
>
> Regards,
> Ramesh.
Hi Ramesh,
Firstly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> OPatch" then download and install OPatch_10205_Generic_v0.zip
Secondly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> Generic (32-bit / 64-bit)" then download and install "Pre-Upgrade Information Utility utlu102i.sql (zipped)" and "p8350262_10204_Generic.zip"
Thirdly, "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> AIX5L (64-bit)" then download and install "SAP_102048_201106_AIX.zip"
You can find readme fles in the zip files.
Best regards,
Orkun Gedik

11.2.0.3 Patch Set for Linux x86, x86-64 is out

I've seen several posts asking for the release of this patch set.
To download it: http://ow.ly/6CKL1
New features guide: http://bit.ly/qX0PN8
I didn't find the list of bug fixes.
Thanks,
Galo

I am a student and have a student job as lab consultant. My boss asked me to install patch on oracle 11gR2. I am trying to patch oracle 11gR2 with 10100101. before that I installed OPatch utility 6880880. I am doing everything according to steps like setting path correct etc. still I am getting "failed to load the patch object...meta-data files are missing from the patch area".
I have done lots of research on error but still I cant solve it.I am really stressed as this job is importnat to me. If you can please tell me the details how to correctly patch oracle 11gr2 (X64). I have downloaded the correct OPatch uttility in oracle_home etc. Plz advice :(

Latest 9i Patch set for Windows X86

Hello All,
Could you please inform me what is the latest patch set available for oracle 9i in
Windows 32 bit platforms.
Thanks and regards
Satish V Chandran

Thanks Fzheng,
Could you please tell me where can I get the software from. I couldnot find it in Oracle site. This particular version was available only for Stratus x86.
Regards
Satish

OS patches necessary for generated code when switching to Studio 10

Hello,
Studio 10 requires a couple of OS patches. We wonder, if this requirement also applies to the generated code?
I'm especially concerned about the SUNWlibC and Linker patches. I'd very much appreciate any help on this!
Thanks,
Kai

The runtime patch fixes a few small bugs in the library, but the major fix is for exception handling on the AMD64 platform. You didn't say originally what platform you were on.
I would not expect to see this kind of failure with a program built with Sun Studio 10 on Solaris 8.
This kind of failure can occur if you link any system libraries statically. All system libraries, from /usr/lib or from the compiler installation area, should be linked dynamically. (The shared libraries that ship with the compiler are freely redistributable, as documented in the "runtime.libraries" file in the <install-dir>/READMEs directory.)
First make sure that in the entire program, including all shared libraries that you use, that system libraries are linked dynamically (.so) and not statically (.a). You might have to inspect the build logs to be sure.
If static system libraries are not the problem, get the current C++ compiler patch from the Sun Studio patch page
http://developers.sun.com/prodtech/cc/downloads/patches/index.html
and see if that helps. If not, and if you have a service contract, your Sun service representative can get you a pre-release version of the C++ runtime library patch 119963-01 for you to try.

8.1.7.2.1 patch set. (8i server patch set for windows )

Hi,
Please, where may I find the patches for 8.1.7 server to download. I do not have access to metalink. I urgently need these patches.
Thanks

1. If both databases are using the same ORACLE_HOME , then yes you will be need to shut down both databases and patch each one. Youa re patching the Oracle binaries as well as running new versions of catalog/catproc/catrep etc.
2. Not srue about number 2. I don't use the web server piece. My guess would be no since you are using a different version.

Patch Set 1 for 9ids expected when ?

Similar Messages

Maybe you are looking for