Patch set 3 - release not file - [SOLVED]

Hi all. I have no direct access to metalink, so is there someone that can put here or give me a link to release note file of patch set 3 for Oracle Form??
Thanks in advance,
Fabrizio
Message was edited by:
fdellipriscoli

Hi Rajesh:
Can you please also send me a copy ([email protected])
Thanks,
Thomas

Similar Messages

FRM-99999: Error 408 occurred. See the release notes file (relnotes) for

I am trying to insert the data in a a table and iam geeting this record
please advise

I get this error too. It is caused because of a check constraint violation on a materialized view that is fast refreshed on commit. First we see a FRM-40400 (1 record applied and saved) and immediately after that the FRM-99999 Error 408.
Don't know if this is the case at your location, but it could be.
At the moment I'm also looking for a solution.
Kind regards,
Rob van Wijk.

Error while appying patch set 4 (10.1.3.4.0) to oracle home (10.1.3.1.0 )

Hi,
I am trying to apply patch set 10g Release 3 (10.1.3) Patch Set 4 (10.1.3.4.0) to 10g Release 3 (10.1.3.1.0) oracle home. As the pre - installation steps describes I have run the script ‘upgrade_10131_10134_oracle.sql’ for both ESB and BPEL. Also we need to delete the line <data id="java-bin" value="/myhost/jdk1.4.2/bin/java" />from the ‘ORACLE_HOME/opmn/conf/opmn.xml’ file. But when I have checked that file, the line was not present there.
But when I am running the installer, it is showing error like
Error
--> Process (index=1,uid=418288051,pid=30220)
failed to start a managed process after the maximum retry limit
Log:
C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\\HTTP_Server~1.log
Configuration assistant "OPMN Configuration Assistant" failed.
When I checked the log I got the error message like
08/12/05 14:00:10 Start process
Syntax error on line 278 of c:/oracle/soa_ofmpractice/soatesting/apache/apache/conf/httpd.conf:
Cannot load c:/oracle/soa_ofmpractice/soatesting/apache/apache/modules/apachemoduleossl.dll into server: (127) The specified procedure could not be found:
Does anybody know how to fix this problem?
Thanks & Regards,
Anju

There is a quick fix for this
There are 2 lines you need to comment form the c:/oracle/soa_ofmpractice/soatesting/apache/apache/conf/httpd.conf
A comment is done with a #
If you look in the C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\HTTP_Server~1.log file it will tell you.
Find the line that has apachemoduleossl in it. When you try and restart it will fail again the C:\Oracle\Soa_OFMPractice\SOATESTING\opmn\logs\HTTP_Server~1.log should tell you what line to comment
sorry can't be of much more help but dont have access to an environement at the moment.
cheers
James

About patche set in oracle

i want to know the oracle release number format installed in my system i get 10.2.0.1.0 using the product_component_version
here, the last digit indicates the patch set.
i didnt understand what is meant by patch set?even not able to differentiate all the sections?
so just i want to know what each digit specifies and what is meant by the patch set?
what is the relationship with the platform to this patch set?

Patch Set is the The fourth digit, component specific release number of 11.2.0.3. Oracle Support adds new features to the Patch Set.
Patch Set Update is the fifth number 11.2.0.2.3; Every 3 months or so, Oracle Support release a Patch Set Update (PSU) to fix Patch Set bugs and does not add any new features to the PSU.
Now, you may ask what about the other 3 digits; the first, the second and the third?
The first digit is the major version, in our case 11g. The second digit is the release number, in our case it is release 2 also called (11g release 2 or shortly 11gR2) with major upgrades and major new features. The third digit is Oracle application specific number, always equal to 0 for database software.
http://www.oracle-class.com/?p=2401

QuickTime 7 Release Notes

Could someone tell me where I can find the QuickTime 7 for Windows release notes?
Thanks,
John

In the Documentation window look at the bottom of the list to the left. There are "Release Notes" under "Resource Types".
Release notes: file:///Library/Developer/Shared/Documentation/DocSets/com.apple.adc.documentati on.AppleiPhone2_0.iPhoneLibrary.docset/Contents/Resources/Documents/releasenotes /iPhone/RN-iPhoneSDK/index.html
Change List: file:///Library/Developer/Shared/Documentation/DocSets/com.apple.adc.documentati on.AppleiPhone2_0.iPhoneLibrary.docset/Contents/Resources/Documents/releasenotes /Miscellaneous/RN-iPhoneBetaAPIDiffs/index.html

Files modified by 10g Release 2 (10.2.0.4) Patch Set 3 for HP-UX Itanium

Hello, anyone knows what are the files modified by 10.2.0.4.0 Patch Set 3? or where can I found this information?
Thanks in advanced.

Hello Srini, thanks for your answer.
I haven´t Oracle Dataguard, I have a disk replication with other supplier, for this reason, I need to know the files that will be modified, because if the patch modifies a file that I haven´t on replication, I will have problems.
Thanks again.

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

Cpio syntax in 10g Release 1 (10.1.0.3) Patch Set 1 for AIX-Based Systems

OracleÂ® Database Patch Set Notes
10g Release 1 (10.1.0.3) Patch Set 1 for AIX-Based Systems
Download and Extract the Installation Software
To download and extract the patch set installation software:
1. Download the p3761843_10103_AIX64-5L.zip patch set installation archive to a directory that is not the Oracle home directory or under the Oracle home directory.
2. Enter the following commands to unzip and extract the installation files:
$ unzip p3761843_10103_AIX64-5L.zip
$ cpio âidcv p3761843_10103_AIX64-5L.cpio
Of course cpio -i is expecting a standard input, so there a missing <
cpio âidcv < p3761843_10103_AIX64-5L.cpio
Best Regards
Laurent Schneider

Hi Laurent,
Apologies for the delay responding to your feedback.
The Document to which you refer does not appear to be listed on the pages my group maintains at: http://www.oracle.com/technology/documentation/index.html
We are not actually part of the OTN group.
Therefore, please try the Members Feedback forum instead at: Community Feedback (No Product Questions)
Thanks and regards,
Les

Apex3.1.1.zip vs patch set notes

Hi
Does anyone has any experience yet with the 3.1.1 upgrade?
Seems to me the patch set notes weren't written for the download. The notes discuss a p7032837_11106_generic.zip while the download is apex3.1.1.zip
Filename change is ok, but then I read the instruction where it says to run apxpatch.sql, which is not in the apex3.1.1.zip file?
Also the notes say it's a patch set while the size of the apex3.1.1.zip look to me if it were a full release.
So now I'm puzzled how to proceed
1) Just install apex3.1.1. using the 3.1 install instructions?
2) try and find the p7032837_11106_generic.zip file?
Anyone any experience?

Hi,
you are right, there are two different things going on:
1) Patch p7032837_11106_generic.zip which is for upgrade of a 3.1 installation to 3.1.1
2) Full Version 3.1.1 which is used to install Apex from Scratch of upgrade an old version (e.g. 2.2) to 3.1.1
Note: you can't use the Full Version 3.1.1 to upgrade from 3.1, therefore you have to use the Patch which is downloadable from metalink.oracle.com
Peter

Not applied Patch 5117016 after 10.2.0.2 patch set.

Hi ,
database has been upgraded to 10gR2 on solaris 64bit. Patch 5117016 has not been applied after 10.2.0.2 patch set applied. but after that DST patches were applied. here my concern is should i rollback DST patches in order to apply Patch 5117016. as per metalink note:394933.1
please advise me.
thanks in advance,
Hussain.

Hi,
I have got problem when I was installing 10.2.0.3.0 Patch Set after succeed installation of Oracle 10.2.0.1 on Windows server 2003.
Server was shut down by a coworker middle of installation of 10.2.0.3.0 Patch Set resulting that Patch 5556081 : was not applied ( see below opatch_history.txt ) .
When I try to apply 10.2.0.3.0 again it fails saying that Patch Set is already installed.
When I run OUI to see what has been installed I see only Interim Patch #5557962.
I didn't create any database between the installations.
So I can't apply OpachSet README.html advice .
Uninstall PathSet :
C:\> sqlplus /NOLOG
SQL> CONNECT SYS/SYS_Password AS SYSDBA
SQL> SHUTDOWN IMMEDIATE
SQL> EXIT
Should I try to Create a Database and after that apply OpachSet README.html advice
C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch_history.txt
Date & Time : Fri Aug 31 10:56:03 CEST 2007
Oracle Home : C:\oracle\product\10.2.0\db_1
OPatch Ver. : 10.2.0.3.0
Current Dir : C:\oracle\product\10.2.0\db_1\sysman\patches
Command : apply -silent -local -oh C:\oracle\product\10.2.0\db_1 C:\oracle\product\10.2.0\db_1/sysman/patches/5557962
Log File : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2007-08-31_10-56-03AM.log
/regards

10g Release 2 (10.2.0.4) Patch Set 3 for Linux x86 is available

For all those who were in need of some bug fixing, maybe it has been patched in 10g Release 2 (10.2.0.4) Patch Set 3 for Linux x86, which is now available for download.

Hello Srini, thanks for your answer.
I haven´t Oracle Dataguard, I have a disk replication with other supplier, for this reason, I need to know the files that will be modified, because if the patch modifies a file that I haven´t on replication, I will have problems.
Thanks again.

Patch 6867054 to 6810189 (10g Release 2 (10.2.0.4) Patch Set 3 )

I'd like to go from 6867054 to 6810189 on Windows 32 bit machine. Can I just run the 6810189 setup.exe OR are there any intermediate patches to install.
Opatch lsinventory is showing this:
Interim patches (1) :
Patch 6867054 : applied on Fri May 02 11:00:16 EDT 2008
Created on 14 Apr 2008, 10 02 56 hrs
Bugs fixed:
Thanks.

Hi.
As I understand you want to upgrade to the patch set 3, in other words to 10.2.0.4.
yes, you can use setup.exe for this. This patch set could be installed on any release starting from 10.2.0.1, regardless of the previous patch set, or interim patch's installed.
I would recommend to read patch set installation instructions carefully, you can find all the information on read notes there.
Make sure you backed up your current oracle home, oracle inventory and oracle database directories(i.e. datafiles).
Patch sets and interim patches are cumulative, they themselves manages previously installed patch sets or interim patches. but patch bundles are specific for base patch sets.

10.1.0.5 Patch Set Release Date?

Hello,
Does anyone know the projected release date of the 10.1.0.5 patch set for Oracle Database Server?
I'm interested in Solaris SPARC patch set.
Thanks,
Vlad

CPUJan06 states that 10.1.0.5 is supposed to be release today Jan 31, 2006.
Though it is still not available via metalink...

Where can I get oracle 9i release 2(9.2.x.x) patch sets?

Hi. everyone.
Where can I get the patch sets for "oracle 9i release 2"?
I looked aroud this site, but I could not find it.
Additionally, I would like to get the document, explaining the detail
of bugs after oracle 9i release 2 (9.2.0.1).
Does anyone help me? Thanks in advance.
Have a wonderful day.
Ho.
Message was edited by:
user507290
Message was edited by:
user507290

to forbrich
Thanks for your reply.
Have a wonderful dream. I think you are in dream now.
I am at the opposite side of the Earth you live.
Thanks again.
Ho.
from Japan

[SOLVED] Braid AUR "ERROR: There is no agent set up to handle file..."

SOLUTION AT BOTTOM OF THREAD!
I have installed numerous AUR packages in the past. However, this is the first that I am unable to figure out.
I assume I am supposed to extract the tar, copy the Braid package files (from my owned copy of Braid) to the same directory, run makepkg, then install via pacman. The problem I am having is when I go to use makepkg I get the following error:
# makepkg -s
==> Making package: braid 1.0.2-1 (DATE TIME)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
==> ERROR: There is no agent set up to handle file URLs. Check /etc/makepkg.conf.
Aborting...
I am not finding any solutions on Google. Please help!
Edit - Edited to show thread solved.
Last edited by qKUqm3wtY4 (2013-01-03 17:00:49)

SOLUTION! Provided by tdy
braid-linux-build2.run.bin from Humble Indie Bundle 2 is required!
You must edit the PKGBUILD file.
source=("$_gamepkg"::"file://$_gamepkg"
Change the source line to this:
source=($_gamepkg
Don't extract the braid file. Just place it in the same directory as the PKGBUILD file.
Run makepkg
# makepkg -s
Then run pacman
pacman -U [filename].pkg.tar
YOU ARE DONE!
UPDATE!!!
AFTER THIS THREAD WAS SOLVED, THE AUR PACKAGE WAS UPDATED TO SOLVE THIS ERROR. JUST MAKE SURE YOU HAVE THE braid-linux-build2.run.bin FILE IN THE SAME DIRECTORY, AND THE INSTALL WILL WORK.
Last edited by qKUqm3wtY4 (2013-01-06 09:18:11)

Patch set 3 - release not file - [SOLVED]

Similar Messages

Maybe you are looking for