Patch set for 11g database.
From where can I download the patchset for oracle 11g database?
Regards,
Atif Iqbal
Any patchset for 11g release 1/2You can download 11gR2 (11.2.0.2.0/11.2.0.1.0) or 11gR1 (11.1.0.7.0/11.1.0.6.0) directly from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html and you do not need to apply any patchset on top of it.
and also the meta notes access.Since you do not have a CSI number, I believe this will not be helpful -- We cannot post the contents of MOS (Metalink) docs since this violates Oracle support agreement policy.
Thanks,
Hussein
Similar Messages
-
Current Patch Set for Oracle Database Release 11.2
Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri -
Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik -
Please provide the patch set for Oracle Enterprise Manager Grid Control 10
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com -
How to install Oracle Change Management Pack for 11g database.
Hi,
I need to setup "Oracle Change Management Pack" for my oracle11g database. Can any body help to do the same. i am able to configure following.
Oracle Configuration Management Pack
Oracle Data Masking Pack
Oracle Diagnostic Pack
Oracle Tuning Pack
using following URL
http://docs.oracle.com/cd/B28359_01/license.111/b28287/options.htm#CIHBGJCC but not able to install "Oracle Change Management Pack for 11g database". Can any body share any pointers if any...
Regards
DBA.As far as I could understand, this is a part of Oracle EM/Grid installation:
The sections that follow describe the Oracle management packs. The management packs can be purchased only with Enterprise Edition. The features in these packs are accessible through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and APIs provided with Oracle Database software. -
ETA for 9.2.0.2 PATCH SET for NT
When we gonna have 9.2.0.2 PATCH SET for NT ??
sjarifThere is a thread for this in the OLAP forum, release was due on 8th Nov but has been pushed back to the 15th Nov, so we should see it by early December!
-
where can I download the agent for 11g database for 10.2.0.4 grid control? i can't find the link.
I don't think there is one yet, but you can use Grid Control 10gR4 to monitor a 11g database. Please refer the certification matrix in Note 412431.1 Oracle Enterprise Manager 10g Grid Control Checker
-
Latest patch set for oracle client 8.1.7
hello,
what is the latest patch set exactly for oracle 8.1.7.xx? I know that this version is desupported but I need this client for a third party application that we have in use.
thanks
katharinaPatch 2376472 is the latest patch set for 8.1.7 which will bring you up to 8.1.7.4. It is still available on Metalink.
-
Oracle 9.2.0.3.0 patch set for windows - questions
Hi!
I have for that some questions. I have oracle 9.2.0.1.0 on a windows 2003 server running with one local database - no real apllication cluster.
I don't understand which instructions I have to make for oracle upgrade?
Must I also make the 3. instruction? Connect to databse prior and drop?
Must I also make the post install action for my database?
(startup migrate ...)
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?
Thanks for help!
1. When applying this patchset on Windows NT, XP or Windows 2000, you must log onto the system as a user with Administrative privileges
(e.g. as a user which is a member of the local Administrators group).
2. Unzip the downloaded patch set file into a new directory.
3. Drop the xmlconcat function by running the following commands:
drop public synonym xmlconcat;
drop function xmlconcat;
4. Shut down any existing Oracle Server instances in the ORACLE_HOME to be patched with normal or immediate priority. i.e.: Shutdown all instances (cleanly). Stop the database services, and stop all listener, agent and other Oracle processes running in or against the ORACLE_HOME to be installed into.
5. Perform the following pre-install steps for Real Application Clusters (RAC) enviroments only:
IN ADDITION TO STOPPING ALL ORACLE SERVICES IN THE ORACLE_HOME TO BE UPGRADED:
If you are running in a RAC enviroment, stop the following Windows service(s)/devices(s) using the Net Stop command:
Stop the Windows service named "OracleGSDService"
Stop the Windows service named "OracleCMService9i".
Stop the Windows device named "OraFenceService" (This Device does NOT show up as a Service in the Control Panel).
For Example:
C:\>net stop OracleGSDService
C:\>net stop OracleCMService9i
C:\>net stop OraFenceService
Once the above steps have been performed on all the nodes of the cluster, you should then be able to upgrade the OSD components to the 9.2.0.3 versions. This can be accomplished by...
xcopy all the files in the \Disk1\preinstall_rac\osd\*.* directory to the directory in which the OSD components were originally installed on all nodes(typically %SystemRoot%\system32\osd9i).
Note: You may also be able to look in HKEY_LOCAL_MACHINE\Software\Oracle\OSD9i registry key to determine the directory in which the original OSD components were installed. Now the OSD components can be restarted on all the nodes in the cluster.
C:\>net start OraFenceService
C:\>net start OracleCMService9i
C:\>net start OracleGSDService
After all of the above steps have been completed on all the nodes of the cluster, you are now ready to proceed with the Oracle 9.2.0.3.0 patchset installation.
6. Start the installer:
If the current Installer version is less than 2.2.0.18.0 then download the Installer 2.2.0.18.0 from Oracle Metalink where it can be accessed with the bug number 2878462 and choosing the MS Windows NT/2000 Server platform, then run the setup.exe 2.2.0.18.0 from the C:\Program Files\Oracle\oui\install directory .
7. You may install the Patch Set through either an interactive or a silent installation.
To perform an interactive installation using the Oracle Universal Installer graphical interface:
1. Start the installer from the newly installed OUI 2.2.0.18.0 by running the version of setup.exe located at C:\Program Files\Oracle\oui\install and verify
that the version of the OUI GUI is 2.2.0.18.0 before proceeding.
2. Follow the steps given below within the installer:
1. On the Welcome screen, click the Next button. This will display the File Locations screen.
2. Click the Browse button for the Source... entry field and navigate to the stage directory where you unpacked
the Patch Set tar file.
3. Select the products.jar file. Click the Next button
The products file will be read and the installer will load the product definitions.
The products to be loaded will be displayed (verify ORACLE_HOME setting for this first).
4. Verify the products listed and then click on the Install button.
5. Once the installation has completed successfully, it will display End of Installation. Click on Exit and confirm
to exit the installer.
To perform a silent installation requiring no user intervention:
1. Copy the response file template provided in the response directory where you unpacked the Patch
Set tar file.
2. Edit the values for all fields labeled as "<Value Required>" according to the comments and examples
in the template.
3. From the unzipped patchset installation area, start the installer by running the setup executable passing
as the last argument the full path of the response file template you have edited locally with your own
value of ORACLE_HOME and FROM_LOCATION:
setup.exe -silent -responseFile <full_path_to_your_response_file>
Post Install Actions
Execute these "Post Install Actions" only if you have one or more databases associated to the upgraded $ORACLE_HOME.
Important Notes
1: Java VM and XML DB Requirements
Users who have JVM (Java enabled) or JVM and XDB installed on their 9.2.0.1 databases should make sure that the init.ora parameters shared_pool_size and java_pool_size are each 150 MB or more before running the catpatch.sql upgrade script. Failure to do so could result in an unrecoverable memory failure during running of the script. Please note that JVM and XML DB was shipped as part of the default 9.2.0.1 seed database and will be present unless the user explicitly installed a 9.2.0.1 instance without them.
2: SYSTEM table space
If you have JServer installed in the database, you should check to be sure there is at least 10M of free space in the SYSTEM table space before running these actions.
3: Installing on Cluster Databases
If you are applying this patch set to a cluster database, then set the CLUSTER_DATABASE initialization parameter to false. After the post-install actions are completed, you must set this initialization parameter back to true.
To complete the installation of this patch set, you need to start up each database associated with the upgraded $ORACLE_HOME, start the database listener (e.g., lsnrctl start), login using SQL*Plus (e.g., sqlplus "/ as sysdba"), and run the following commands/scripts in order from $ORACLE_HOME within a MIGRATE session. If you are using the OLAP option, make sure that the database listener is up.
startup migrate
spool patch.log
@rdbms/admin/catpatch.sql
spool off
Review the patch.log file for errors and re-run the catpatch script after correcting any problems
shutdown
startup
This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this in multiprocessor machines:
@rdbms/admin/utlrp.sql
Execute the following if you use Oracle OLAP option:
alter user olapsys identified by <password> account unlock
connect olapsys/<password>
@cwmlite/admin/cwm2awmd.sql
exit
Execute the following script only if you have version 9.2.0.1.0 of Oracle Internet Directory installed in your ORACLE_HOME. Make sure that the database and database listener are running and that all parameters are specified prior to running the script:
$ORACLE_HOME/bin/oidpatchca.bat
-connect <Connect String>
-lsnrport <Listener Port>
-systempwd <SYSTEM Password>
-odspwd <ODS Password>
-sudn <Super-User DN>
-supwd <Super-User Password>
-dippwd <Password to register DIP Server>
Where:
connect - Database connect string
lsnrport - Database Listener port
systempwd - Password of the database 'SYSTEM' user
odspwd - Password of the database 'ODS' user
sudn - Super-user DN
supwd - Super-user Password
dippwd - New password to register Directory Integration Server. This password must conform to the password policy in the OID server
Execute the following steps only is you are using the RMAN catalog.:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;I don't understand which instructions I have to make for oracle upgrade?
-- You have to follow all the instructions mentioned
(Just check for few if's for Cluster enabled, OID and OLAP databases. Perform these steps only if they apply)
Must I also make the 3. instruction? Connect to databse prior and drop?
-- Yes you should do
Must I also make the post install action for my database?
(startup migrate ...)
-- Yes. Do run catpatch.sql .
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
-- In this step make sure you do step 1
1: Java VM and XML DB Requirements
Otherwise catpatch.sql will fail.
Do 2 and 3 only if applicable
Chandar
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions? -
10.1.0.3 patch set for JDBC bugs?
I researched metalink and found reported 10.1.0.2 JDBC bugs with fixes on 10.1.0.3 patch set. I can't find this patch set. We are currently running 10.1.0.2 JDBC driver over 8.1.7 database. I would like to know how to apply the 10.1.0.3 fixes on the JDBC driver.
Has anyone got the 10.1.0.3 patch set? Where can I get it?
How do I get 10.1.0.3 fixes for JDBC driver only?
Thanks.Hi Laurent,
Apologies for the delay responding to your feedback.
The Document to which you refer does not appear to be listed on the pages my group maintains at: http://www.oracle.com/technology/documentation/index.html
We are not actually part of the OTN group.
Therefore, please try the Members Feedback forum instead at: Community Feedback (No Product Questions)
Thanks and regards,
Les -
Patch set for 10.2.0.1
Hi,
Oracle Version :10.2.0.1
Operating System: RHEL-5 (64-bit)
Can any one please give me the patch set no to upgarde database from 10.2.0.1 to 10.2.0.3.
Thanks & Regards,
Pooran Prasad.S
Edited by: SIDDABATHUNI on Aug 25, 2011 1:32 PMAll my production databases are on 10.2.0.3 so i am planing to upgrade from 10.2.0.1 to 10.2.0.3The way I used to do this .... If I have applied the 10.2.0.3 Patchset to a database earlier, I have the Patchset downloaded and still available somewhere on disk (on a database server, a file server, a desktop .....)
So, if you've patched it , you've got it with you !
There may be times when you may not be able to download the patch again (it is no longer available for download, your internet connection is flaky, oracle support's site is down ....). That is why having the base oracle software and the patch present is a good practice.
I know OS administrator's do the same. They keep Linux installers ready onsite.
Hemant K Chitale -
Applying oracle patch set for Oracle 10.2.0.4
Hi All,
I need some clarification on below suggestions from SAP,
<div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
It is mandatory to install the most current available SBP in SAP environments.</div>
I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
Regards,
Ramesh.ramesh_basis wrote:
Hi All,
>
> I need some clarification on below suggestions from SAP,
>
> <div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
> SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
> It is mandatory to install the most current available SBP in SAP environments.</div>
>
> I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
>
> I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
>
> Regards,
> Ramesh.
Hi Ramesh,
Firstly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> OPatch" then download and install OPatch_10205_Generic_v0.zip
Secondly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> Generic (32-bit / 64-bit)" then download and install "Pre-Upgrade Information Utility utlu102i.sql (zipped)" and "p8350262_10204_Generic.zip"
Thirdly, "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> AIX5L (64-bit)" then download and install "SAP_102048_201106_AIX.zip"
You can find readme fles in the zip files.
Best regards,
Orkun Gedik -
Patch No for Upgrading Database XE
Hii All,
I need to patch My Oracle Express edition(10.1.0.2) to 10.1.0.4 also in my one system
and in another ystem I need to patch 11.1.0.6.0 to 11.1.0.7.0 ,which is a prerequiste for installing OracleSOA 11g toolset.
Can anyone plz tell me what are the exact patch no I need to down load for each case?.
Thanks and regards,
Deekay.Patches are available only when you paid for a support access to metalink, and for the non-free editions.
Oracle XE is a free version of Oracle database 10.2.0.1.
Since it is licence free, you are free to use for whatever you want, however, there is no patches available for this Oracle Edition.
Regarding your 11g upgrade, again, you have to access to metalink (tab "Patches & Updates") and look for the target patchset you want to go to. Patchset depends of your plateform, help yourself.
Nicolas. -
Minimum parameters and values required for 11g database
Hi
Can anyone please provide me with the list of parameters and the minimum value required for these parameters in 11g database (11.1.0.6.0).
Thanksuser8940828 wrote:
Thanks for your help
But this basic parameters did not mention the following parmeters . What can be the mimimum value that can be assigned to these parameters.
dml_locks
log_checkpoint_interval
log_checkpoint_timeout
open_cursors
open_links
parallel_max_servers
processes
session_cached_cursors
session_max_open_files
job_queue_processes
log_buffer
shared_pool_size
sort_area_retained_size
sort_area_size
db_cache_size
pga_aggregate_target
ThanksI suggest you to start letting the default parameters and then tune them step-by-step.
Eg:
- open_links => If you dont have database links you can avoid to set it.
- processes: number of backgroud processes + expected session/users for your application. if you have 1000 users connecting at the same time you would set a value higher than 1000.
- shared_pool_size, db_cache_size, sort_area_size, pga_aggregate_target are not mandatory if you use automatic memory management by Oracle.
- etc. -
How to Change National character set for a database
Hi All,
My database is Oracle 10G. Stand alone DB.
National character set for my DB is "WE8ISO8859P1" and need to change national character set to UTF8.
Need Help on this.
Thanks in advance.
Regards,
SureshPlease go through the topic,
[http://arjudba.blogspot.com/2009/02/what-is-national-character-set.html|http://arjudba.blogspot.com/2009/02/what-is-national-character-set.html] [http://arjudba.blogspot.com/2009/03/unicode-characterset-in-oracle-database.html|http://arjudba.blogspot.com/2009/03/unicode-characterset-in-oracle-database.html]
and decide whether you need migration . If you need migration then have a look at,
[http://arjudba.blogspot.com/2009/03/difference-between-we8mswin1252-and.html|http://arjudba.blogspot.com/2009/03/difference-between-we8mswin1252-and.html]
[http://arjudba.blogspot.com/2009/03/difference-between-we8iso8859p1-and.html|http://arjudba.blogspot.com/2009/03/difference-between-we8iso8859p1-and.html]
[http://arjudba.blogspot.com/2009/03/difference-between-we8iso8859p1-and_11.html|http://arjudba.blogspot.com/2009/03/difference-between-we8iso8859p1-and_11.html]
And always check for reports in csscan.
Edited by: user9533551 on 07-Jul-2009 04:29
Maybe you are looking for
-
how can i download an app from iTunes store, that exists just in a "swiss store". Because my account isn't allowed to download apps from other stores than a slovene. ???
-
Has anyone burned 1080p blu-ray discs using Final Cut Pro alone?
I am in the market for a new computer. Currently I am a PC user who has burned Blu-Ray discs using Pinnacle. I am dissatisfied with that software because it hangs and crashes at critical moments in the rendering and burn process. I am considering swi
-
Transactional Iview passing parameters for search help window
Hi Experts, I have to create a transaction ivew through which i need to pass parameters to search help window (having two entries ). In has to select the particular entry and then go to next step. Can somebody give me guide me how to do it as i could
-
Programs open up scattered all over the screen...can this be changed?
I am new to a MAC as I recently go a 27" iMac. I am loving it, but finding some of the functions sort of odd. I have searched and searched for an answer, but have gotten noplace. I thought I would sign up here it looks like a great resource. I was al
-
Nokia 5230 mark multiple to delete
Is there a way to mark multiple emails/contacts and delete without having to go to options and mark them one by one? My E71 used to be holding shift and select, but the 5230 has no shift button. What can I do?? Thanks in advance