Patch Setup For Multiple Songs / Digitech GNX 4 (two questions)

Hello,
As per the title this is a two-question question.
1. A little bit of background: I play in a band and I've been using my laptop with MIDI controller since May. My current method is simple and a bit of a jury rig, but it works. We have a repertoire of about 80 songs for which I've created separate GarageBand files for each song containing each sound needed for a tune in a separate recording track. Of late, I've been needing a way to use two controllers to control two sounds and so I've just gotten Logic Studio and have been futzing with MainStage. My question is as follows:
It seems that theoretically I could make one Project file and literally load patches sorted by song for our entire repertoire, but it would cause my computer to be ridiculously slow since I only have 1GB RAM. Because I only have 1GB should I just make separate Project files for each song or is there a way I can load everything in one file without making the computer be slow? I do plan on upgrading the RAM to 4GB if this all works out.
2. I also have a Digitech GNX4. It has a USB port for computer recording and it's worked with Garage Band. Can I assume it will work with the guitar effects of MainStage? (The USB port is broken and since I haven't really needed it, I haven't had it repaired. If the GNX4 does work with MainStage, you can bet it's going to the repair center).
I've loaded some of the guitar effect presets that have like 20+ patches and it takes a long time to load which I'm guessing is tied to only having 1GB RAM.
Thanks for anyone's help.
+My Gear apart from laptop:+
+- M-Audio Keystation 88es+
+- M-Audio KeyStudio 49+
+- M-Audio Oxygen 49 (just bought, arriving tomorrow and will most likely be returning the KeyStudio if it works well)+
+- Digitech GNX4 guitar effects processor+

Right (as MIDI controller). I was speaking about that solely as able to use the amp modeling features of Main Stage.
My RAM should be arriving on Wednesday, upgrading from 1GB to 3GB
I have two MIDI controllers; M-Audio Keystation 88es and Oxygen 61.
My live situation is 95% keys (my various sounds split between the two controllers), and just running my guitar clean direct to amp for the few tunes when I use it (my guitar is a Rickenbacker 360-12). We're starting a few new songs where I'll have to use my six string so that's why I was curious if my GNX4 via USB can, again, use the amp modeling for those few songs. It's on it's way to the repair shop so it'll be a few weeks before I can test it.

Similar Messages

How do I change the start/stop time for multiple songs not just one song at a time?

How do I chnage the start/stop time for multiple songs not just one song at a time?

I don't think you can in iTunes.
Multiple editing in Get Info does not offer an option to change start/stop times.

Ability to Edit info for multiple Songs seems missing in iTunes 12

From a review of this forum, it appears that iTunes 12 no longer permits editing of certain fields for multiple songs.
Formerly, one could select any group of songs and, via using Get Info, edit virtually any field for all songs at the same time.
In iTunes 12 this ability seems missing for certain fields.
Am I missing something or is this highly useful feature now gone?
I can't seem to get a clear picture of this from current forum posts.
Thanks for any comments.

marked as solving problem.
did not mean to do that as use of 3rd party scripts should not be necessary for such a core function in itunes
apple need to restore that basic feature. I will submit a request to them directly.

Kernel patch upgrade for multiple instance

Hi expert,
I want to know will we follow the same process while upgrade the kernel patch only for Multiple ABAP STAK.
We have system which has 3 instances....................so my question is exactly where we ned to put the kernel files (Generlly it should be in /EXE or /RUN file)and in which instance.......

1.If I copy the patches only in central instance will it affect to all other instances.....?
If you have configured your SAP system correctly then Yes, Kernel upgrade in Central Instance will reflect in Dialog Instances also.
2.what is the concept of SAPMNT..(/sapmnt/SID/exe ).........?
/sapmsnt/SID/SYS/exe -> to share the kernel across the instances
3.What is the difference between EXE and RUN directory ............will it make any difference if I copy into EXE folder instead of
/usr/sap/<SID>/SYS/exe/run is located on the host system of the R/3 instance and is for locally-stored executables
/sapmsnt/SID/SYS/exe/run -> Central Instance directory
/usr/sap/<SID>/SYS/exe - Dialog Instance directory
you can check the values of DIR_EXECUTABLE or DIR_CT_RUN (if you are using sapcpe) to determine the kernel directories for central and dialog instances respectively

Unlimted License Patch fails for multiple versions of Server Express

I'm following the directions for installing and licensing two versions of Microfocus Server Express for a PeopleTools 8.52 upgrade. When I get to the point where I apply the Unlimited License Patch (ULP), the application to the first version goes fine, showing a successful "installed" message. After installing the other version of Server Express, I try to apply the ULP again and this time it returns an "uninstalled" message. Eventhough I had COBDIR set to the 2nd installation, the ULP deinstalled the patch for the first installation. I'm doing this as the root user but I have su'ed to root. This worked fine 2 years ago. What am I missing in the environment that prohibits me from installing the ULP for multiple versions of Server Express?

LD_LIBRARY_PATH

Exchange setup for multiple domains

We are planning to deploy Exchange server 2013, We have two companies and would like to create Email box for both the companies with same name.
Example : [email protected], [email protected]
We would like to have separte email boxes for the both companies. Please suggest us accordingly.

That should be simple enough. Exchange can handle having multiple domains for sending / receiving and users can have multiple mailboxes configured in Outlook. The name field in Exchange doesn't need to be unique (the account name does obviously), so for
instance there's no issue having "Fred Bloggs" <[email protected]> and "Fred Bloggs" <[email protected]> both setup.
In a way the trickier part is setting it up in Outlook since different versions react differently. If you're using Outlook 2013 it should be quite straight forward. As you can see here
http://technet.microsoft.com/en-us/library/ee815819.aspx the manual setup is easy enough for multiple exchange mailboxes, though auto mapping should work as well. If you're in a network AD
environment (eg connecting using your local password), then realistically you'll want one mailbox to be primary which is associated to your network login, and then that login to have full access and send as permissions on the second mailbox.
You may also need to deploy a reg key change to enable saving sent items from the second mailbox into that mailboxes sent items folder rather then the primary mailboxes (assuming you want to keep messages two and from both domains separate and in their own
mailboxes). The reg key is listed here
http://support.microsoft.com/kb/2843677 and is definitely needed in Outlook 2007 and 2010 but I'm not sure if it's still an issue if you're using Outlook 2013.

What is icloud setup for Multiple users, multiple devices in family?

What would be the recommended setup for iCloud to allow family members with multiple devices and multiple iTune accounts to share purchases, sync there own mail account, contacts, and reminders with multiple devices, and be able to sync calenders with all family calendars? Or better yet how can family members pick and choose what to sync with a common iCloud account?

I'd like to know this to.
We have 1 mac mini that serves as a media station that streams audio to Zeppelin air and photos & movies to our TV.
My wife buys music on her iPhone. And takes pictures of the family.
I buy apps and music on my iPad. And make movies of the family.
I have a macbook pro ( itunes with home sharing, iphoto home sharing ).
She has a nice macbook ( itunes with home sharing, iphoto home sharing ).
What we would want is that the mac mini collects all music / videos / media and streams it to all our apple devices via wifi ( not via internet ). But I with my appleID and she with her appleID.
I wonder is Apple can make an GUInterface that I can understand to solve this.
This iCloud seems not too suited.
For families it would be easier if iOS5 would have 'home sharing' with upload and not transfer everything to CA first.

How Do I put in the same image for multiple songs on iTunes

Hi,
I know if I click on the song on "info", I am able to change the album image. Is there a way for me to select multiple songs and do a bulk change with the same image?
Thanks.

Yes.
Select multiple songs, get info and paste the artwork.
Or select multiple songs and drag the artwork to the artwork window at the lower left of iTunes.

One player for multiple songs on webpage. How do I do it?

I have multiple songs listed on a webpage and I'm looking for a way to listen to them without opening a new page eveytime you click on a song. It doesn't have to be a fancy player interface.
Something that allows the viewer to continue reading the contents, of that same page, while listening to their song of choice.
Also, can someone suggest a way to present the songs for listening only, while disallowing the ability to download the actual file?
Thanks,
Keith
G5 Dual 2.5 - 2GB RAM Fireface 800 Mac OS X (10.4.7) Logic Pro 7.2

http://discussions.apple.com/message.jspa?messageID=2739776#2739776
Try the suggestions found on this link.

Entry Channel setup for multiple company codes

Hello,
I have a question regarding the entry channel setup (for external requirements in the Plan-Driven Procurement scenario)
In previous implementations, I 've created an entry channel below each company code (as the documentation says it should be). Now, for each entry channel, there was a EBP user assigned, which corresponded to an RFC entry in the backend system (I was connecting EBP to multiple backend systems)
Now, what should I do in the following scenario?:
1. SRM is only connected to one backend system
2. There are 50 company codes
Does that mean I have to create 50 users (for each channel) plus 50 RFC connections in the R/3 system (each with a different user in the backend system), pointing to the same SRM system?
I was thinking of creating an Org iD in the SRM structure at the top (which would be the entry channel), assign only ONE user to it and then fill attribute BUK with all the company codes. However, I don't know if this will work, because the external requirement process might need the company code defined in the "Function" tab... =/
Any help would be greatly appreciated.
Regards,
Gilberto.

Hi Proyecto Genesis,
I am also configuring the Entry channel (org unit) for multiple company codes.
I tried your logic of defining the entry channel outside company code level. Assigned the BUK attribute and extended attribute for plants and storage locations.
Also in my case the local Pur org and Pur group is defined outside the company code. Is it correct?
However the system fails to transfer the external requisition to SRM.
SLG1 displays following error message.
"No address found for partner function type Ship-To Address"
So if I move the Entry channel (org unit) under any one company code level then the external requisitions are transferred correctly to SRM.
But then the issue is the requirements are not transferred with the backend Pur Org and Pur grp. Instead they are transferred to the Pur Org and Pur grp of the company code under which the entry channel is defined.
Can you please share how do we need to define the entry channel, local pur org and pur grp for multiple company codes scenario, so that the ECC requisitions are transferred with the correct company code, pur org and pur grp to SRM?
Or do we need to define Entry channel for each company code and RFC user actually mapping the same backend system?
Please guide.
Regards,
Sandeep

Updating info for multiple songs at the same time?

Is there a way to highlight multiple songs and change info for the songs at the same time without having to do it for each individual song? Example: changing the album or the genre for a batch of songs?
Thanks.

Michael,
You can shift-click to make a continuous selection or command-shift to make a discontinuous selection.
Then choose Get Info from the file menu.
Matt

How do I organize my itunes library so that album name only shows up once for multiple song?

When I view the songs in my itunes library, it appears that album names appear multiple times even though they are the same album. (that I may have added to my itunes library at different times).
For example: For U2 album War, there are multiple songs in my library which I downloaded or uploaded in my itunes album at different times. Now the album War under artist U2, appears multiple times. How do I organize and make songs that belong in the same album appear under the album once so when I choose the specific album, all the songs are available there so I can listen to it all or shuffle it within the album. I don't want single songs under the same album names. It is very irritating. Please help to organize my itunes library better, I have a large album and it would be much easier if the album names would appear once when I have multiple songs for that album. Thanks!

Each tune gets a file name - that is how iTunes works. iTunes is a data base manager.
In a PlayList a reference is created that will link to a specific tune.
You can take the tunes that you do not want listed under a particular album name and change the album name using 'Get Info' for that tune(s) from the iTunes window.
MJ

Itunes setup for multiple Ipods

I have not figured out how to setup more than one Ipod on one PC. I have tried using playlists but end up duplicating songs one one of the Ipods. Any suggestions would be appreciated.

There are several different ways to use two iPods with one computer, have a look at this help page for suggestions: How to use multiple iPods with one computer
If you want to use selected playlists for each iPod try this. Open iTunes and create a playlist to update from iPod from, call them -My iPod1, -MyiPod 2 for example (the dash will position them at the top of the playlists in Sources). Drag whatever content you want to have into each playlist. Now connect your first iPod and when it appears in the Source list click on the iPod icon to bring up the preference tabs in the main pane. Go to the Music tab and choose Sync Music and the Selected playlists radio button. Choose the playlist you just made for this iPod from the selection and click Apply. Eject this iPod and connect the next one and follow the procedure above only choose the playlist you made for this iPod. Eject the second iPod and repeat the process until they are all done.
You can also sync from any existing playlists by choosing the same setting, you just need to make sure that the size of the playlists don't exceed the capacity of your iPod.

Track setup for multiple independent projects

Hi,
We have to develop two separate projects in NWDI. Both projects are Web Dynpro based, independent of each other and developed by different development teams. We need the ability to maintain and deploy the projects independently. What is the recommended way on creating the track(s) for this scenario?
Should we create separate tracks for each project? OR should we create one single track and two SCs with in the track (one for each project)? If we go with 2nd option, can we grant authorization to developers at SC level (as different development teams will be working on these projects)? What is the recommended way of creating track(s) when working on multiple projects?
Thanks
Kumar

Hi Kumar,
it's not so bad. After initial setup of those tracks, there is not a lot of maintenance to do. We are running a NWDI here with 21 tracks...
There are some ways to consolidate thinks. If there are several projects with the same runtime systems, you can for example setup one delivery track for your production system and transport track connections to this track from all development tracks. In this way you can have a easy overview in system state of this tracks, on what was trasnported to your production system. And you can secure your production system from developer access this way; if your are going for SOA conform setup of your projects.
Kind regards
Jan

BOGO Modifier setup for multiple items

Regarding the BOGO (buy one, get one free) promo we can set up easily. We have a situation where to set-up a BOGO in which there is one or more “buys” and but only one “get”.If there is a case where there are many “gets” though (e.g. Buy “A” and get “X”, “Y” or “Z” for free) what is the best way to setup the promotional modifier?
IS there a way where we can configure a modifier like buy A item, and user should be able to select either “X”, “Y” or “Z” item?
One thought was to set-up the multiple “get” options as related items at $0 or is there a better way to setup?
Thanks,
Rishi

Hi Rishi,
Sorry to ask for information on your question only but is there a way you can send me details on how to setup BOGO? (Simple condition what you have mentioned i.e. Buy 1 Get 1)

Patch Setup For Multiple Songs / Digitech GNX 4 (two questions)

Similar Messages

Maybe you are looking for