Patch timings

From where I can find the time period taken for applying a patch via ADPATCH apart from OAM?
Edited by: user12007281 on Nov 30, 2010 8:54 PM

Hi,
Query AD_BUGS table or run the Timing Reports from OAM.
Oracle Applications Patching Procedures -- Chapter 4, Timing Reports
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121adpp.pdf
Oracle Applications Patching FAQ for Release 12 [ID 459156.1] -- How do I know what patches have been applied to my system?
Or, check the patch log file if you do not want to use OAM.
Thanks,
Hussein

Similar Messages

Patch status in ad_patch

Hi,
I have 1 dbtier and 2 apps servers. One apps tier is using for CM and other serverices but node 2 has everythings else minus CM. When I applied patch on both node it returns 2 rows. Is that correct?
BUG_NUMBER BUG_ID CREATION_
8623536 373661 16-JUN-11
8623536 373519 16-JUN-11
Please advice in dual node arcitecture patching.
thanks

I have 1 dbtier and 2 apps servers. One apps tier is using for CM and other serverices but node 2 has everythings else minus CM. When I applied patch on both node it returns 2 rows. Is that correct?
BUG_NUMBER BUG_ID CREATION_
8623536 373661 16-JUN-11
8623536 373519 16-JUN-11
Please advice in dual node arcitecture patching.Have you tried checking the creation_date with something like to_char(creation_date, 'hh24:mm') to see if the timings correspond to when you applied the patches to the tiers. Your patch log would have the times applied to verify.
In my case, I have11 5.10.2 with a shared APPL_TOP for most of the modules but have a separate external apps tier outside our local network sitting in DMZ - but I can see only one record for each bug at least for all that were applied in the last 100 days.
Regards,
Edited by: DBA_EBiz_EBS on Jun 17, 2011 3:23 PM

PREEMPT_RT patch and Arch

Hello All,
I'm wondering if anyone has toyed around with the PREEMPT_RT patch using the Arch concept to simplify the processes to accommodate non-critical motion control across wireless or local area networks as a server for applications such as security cameras, thresholds, landscape automation, environmental controls, etc. There are also several commercial applications that might be reasonably run through the hybrid RT capabilities of a adapted timer and a preempted Linux kernel with an ultra-lean Arch config.
I'm a newbie and interested in finding out what I don't know before I throw a bunch of time at a flawed concept. I've been linux lurking for quite a while hoping to find a really lean operating system and overhead that retains the dual characteristics of general motion control and networking. These could be used in any number of closed loop commutation and synchronization schemes to afford relatively accurate positioning at long distances and communicate the result.
Obviously this could be accomplished with enough money to buy gear and canned (black box) applications but the cost of repetitive installation pales even the bravest entrepreneur. So, the search continues.
Is there any inherent reason that Arch and the RT patched kernel won't work together? Most of the pengutronic stuff I've been reading is a little dated. Admittedly, I may have just outed my lengthy lurk in a spasm of sheer excitement that this may be the one. But I thought I might just simply ask before I work my way to another dead end.
Anyone?

Let me say up front... personally I have no idea. You could always simply try it and see if it works!
That said, my reason for posting is to say, you might get better traffic on this question in another part of the forum, since this has very little to do with differing architectures. Your best bet might actually be the Networking, Server, and Protection area since your basically talking about setting up a server designed to control security cameras, or the Kernel & Hardware Issues area, since you are asking specifically about a kernel patch.
I got curious and googled the patch you're talking about... I am fairly sure it should work for Arch, since it seems to be very distro agnostic.
I am curious about why you feel the rt patch would help with motion control over a network... it is aimed at working with microsecond timings, than longer term workloads. RT is only really useful (right now) for really short units of work in response to real time events. Basically, if you want to hit a bug's wing that was spotted on a camera with a high powered, very narrow focused laser, then an RT kernel might help you. An RT kernel is aimed at starting up responses really fast. Unless you are responding to something captured by the cameras, and less than a tenth of a millisecond is necessary to that response, a normal "real-fast" kernel might be a better idea.
http://www.rdrop.com/users/paulmck/real … 06.22a.pdf
There is a link to a white paper about the RT-Kernel and the Preempt_RT patch set. It's 9 PDF pages, but if you want to just skim it, the summery has a nice decision tree to help make the choice between real-time patch and the vanilla "real fast" kernel.
The RT-patchset might actually be more work than strictly needed for the concept you're working on.
It seems to me, and I am far from a Guru or an expert, that what you are hunting for is a motion capture application that can easily be network controlled and is open-source. You need a low overhead OS to give all of the system resources to the motion capturing program. Arch is good for low overhead, and there is the package zoneminder in the AUR (Also with the zmviewer-svn that adds a client capacity to the suite, meaning you can look at/control them from another computer).
You may want to look at Linux-From-Scratch to make an absolutely basic system on the hardware you wish to use for this enterprise. You can strip out all of the unneeded drivers from the kernel, locales, manpages, build tools, and all of the other cruft that is needed by the average install of any Linux OS meant to run on diverse groups of hardware.
By the way, the Linux-From-Scratch would allow you to custom compile and thoroughly test each update before sending them out as binaries to your customers, as well as allowing you to do complete upgrades rather than piecemeal updates to each program on the system as they come available. (Business like the set time table for releases because of the lower amount of downtime for the critical systems.)
Last edited by LeoSolaris (2009-05-11 14:49:41)

Questions on Patch Deployment - From older post.

Almost a year ago I had a post with questions on the patch scan process.
https://forums.novell.com/novell-pro...s-updates.html
I have been reviewing my patch process again due to Student laptop's getting re-imaged this summer. I am hoping I can get some additional information based off the replies from that post.
1. It was stated that monthly patch bundles were created and deployed. I am unsure how that is best accomplished. If I create an all Microsoft (Windows 7 for example) Patch bundle for each month, yet the workstations it is deployed to may not require the patch, would this not cause the bundle to fail? If it just fails on that section will the remaining patch's continue to deploy?
What is the best way to deploy a monthly patch bundle? In the past I would create a patch bundle through the Patch Management area for Windows 7 but assign to only a single workstation and then go back and assign to the Windows 7 group as a "run on ref" option. Is it better to assign the patch bundle to all nonpatched devices? If this is done will a system that is reimaged and no longer has the patch or a new system created after the bundle create be automatically assigned said bundle?
Any other good strategies for patching systems? I create custom bundles for Adobe, Java, and Quicktime to ensure I control how they are deployed. Java seems to be one that works better when older versions are not installed. This method seems to be working well for those products. It is my MS Windows updates that are way off the mark. I have most of my systems with 60 to 80 patches reported ready. No matter how many times I deploy the patches they never seem to report as patched on the devices (Even tho the bundle reports back as successful). I am getting ready to start an SR since I think this is an issue with the server since so many of my systems are doing this. Good deployment procedures would be nice since I really hate to mess with my Universal WIndows image since it is working so well. Recreating it just to patch it with the latest Windows Updates would be pain.
Thanks
Richard

rhuhman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Error : While applying the Patch 4440000

Error : While applying the Patch 4440000
FAILED: file igwprop.odf on worker 1 for product igw username IGW.
When i check the worker log file i got this error
The sequence IGW_AWARDS_S in the database is defined as:
MINVALUE = 1 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
which should be defined as:
MINVALUE = 10000 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
(Note: The cache value for sequence IGW_AWARDS_S is 20 in the ODF file. The value 1000 is being used instead because this provides better performance when selecting from the sequence.)
Alter the sequence with :
Start time for statement below is: Sun Oct 06 2013 22:16:28
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
The following ORACLE error:
ORA-04007: MINVALUE cannot be made to exceed the current value
occurred while executing the SQL statement:
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
Unable to compare or correct sequences
because of the error above
Time when worker failed: Sun Oct 06 2013 22:16:28
plz help me in solving this.

Check the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
You may also log a SR.
Thanks,
Hussein

Error while updating patch level 11 of HR

Dear All,
I am getting following error while updating HR patch level 11.
Phase OBJECTS_LOCKED_?: Objects Locked in Requests
Request      Names of Locked Transport Objects
MRDK900089   LIMU REPS H99_POST_PAYMENT
             LIMU REPS RPCIPE00
MRDK900542   R3TR FORM HR_IN_TAXF16000Y
the above request is in other client, and it is a local request, which is not getting transported; i mean it does not allow to transport. give the following error.
Object messages: R3TR CINS 01200615322 0000824666
Transport objects from package PCPO to target MRP only
Object messages: R3TR NOTE 0000970953
Transport objects from package PCPO to target MRP only
Object messages: LIMU METH CL_HRPAY99_POSTING_LOG DATA_TOP_FILL_TEXT
Transport objects from package PCPO to target MRP only
Object messages: LIMU METH CL_HRPAY99_POSTING_LOG PUT_PERNR_INFO
Transport objects from package PCPO to target MRP only
Object messages: LIMU REPS H99_POST_PAYMENT
Transport objects from package PCPO to target MRP only
Please help me how to rectify.
Thanks n regards
Bhaskar

Hello Bhaskar,
is the transport already approved?
If not approve it and try it again. (also it is a local one)
If not check the objects and unlock them manually the following way:
SE03 => Unlock Objects (Expert Tool)
But if you approve your transport... the objects should be unlocked.
Regards
Stefan

Error while applying a patch "Unable to get the database connection"

Dear Experts,
A patch which got successfully applied is failing Production and the error is kind of surprising to me.
Apps version is 11.5.10.2
db version is 10.2.0.4
The worker log file shows
Time when worker restarted job: Thu Nov 24 2011 22:14:52
Start time for file is: Thu Nov 24 2011 22:14:52
adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
Calling /usr/java14/bin/java ...
Exception occured
              Copyright (c) 2003 Oracle Corporation
                 Redwood Shores, California, USA
         XDF(XML Object Description File) Comparison Utility
                        Version 1
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
AD Run Java Command is complete.
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                                    AD Java
                                 Version 11.5.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Thu Nov 24 2011 22:14:53
{code}
The error says database connection error. I am able to connect to the database using sqlplus. I tried to restart the failed worker, but the same error is repeating.
Any help would be appreciated.
Thanks
qARS
Edited by: user7640966 on Nov 24, 2011 9:07 AM

Hussein,
One thing which I noticed now is in the apps Tier the
tnsnames.ora under $TNS_ADMIN
shows entry like this:
PROD=
        (DESCRIPTION=
                (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
            (CONNECT_DATA=
                (SID=PROD)
        )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
Any clue how this can be fixed?
Thanks
qARS

Error while running a OAF page with 12.1.1 (jdeveloper patch 8431482)

Hi,
I am working on Oracle apps R12.1.1
i m using jdeveloper with patch 8431482 which is mentioned in metalink Doc Id 416708.1
i have tried to run the page from jdeveloper.
it is giving me the following error.
i have checked the DBC file and it is correct.
can anyone please throw any pointers?
Regards
Hitesh
Logout
Error Page
Exception Details.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.lang.NullPointerException;
     at oracle.apps.fnd.framework.OAException.wrapperException(Unknown Source)
     at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(Unknown Source)
     at oracle.apps.fnd.framework.CreateIcxSession.createSession(Unknown Source)
     at runregion.jspService(_runregion.java:132)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
## Detail 0 ##
java.lang.NullPointerException
     at oracle.apps.fnd.security.SessionManager.recordSuccess(SessionManager.java:3820)
     at oracle.apps.fnd.security.SessionManager.validateLogin(SessionManager.java:2082)
     at oracle.apps.fnd.security.SessionManager.validateLogin(SessionManager.java:1946)
     at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(Unknown Source)
     at oracle.apps.fnd.framework.CreateIcxSession.createSession(Unknown Source)
     at runregion.jspService(_runregion.java:132)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
java.lang.NullPointerException
     at oracle.apps.fnd.security.SessionManager.recordSuccess(SessionManager.java:3820)
     at oracle.apps.fnd.security.SessionManager.validateLogin(SessionManager.java:2082)
     at oracle.apps.fnd.security.SessionManager.validateLogin(SessionManager.java:1946)
     at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(Unknown Source)
     at oracle.apps.fnd.framework.CreateIcxSession.createSession(Unknown Source)
     at runregion.jspService(_runregion.java:132)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
Logout
Copyright (c) 2006, Oracle. All rights reserved.

Hi All,
There is the issue with newly relased jdeveloper patch for 12.1. We have raised an SR with Oracle and they have responded back saying : Set profile "Sign-On:Notification" to "No" at site level, which resloves the issue.
--Mukul

How to find out the list of patches applied without using inventory?

Hi,
I have been asked this question once.
How will you find out the list of patches applied to Oracle Database Home without using commands like opatch lsinventory -detal etc...
I think registry$history is a view from where we can find out the list of patches applied.
But I think it will not include all the bug fixes,stand alone or one-off patches.It will mainly list out the CPU patches applied(correct me if I am wrong).
Thanks,
Rushi

Hi;
Thanks Helios,
Your welcome
Could you tell me how do you all senior people manage to find metalink note for almost everything?There is nothing special, For me I just make more search at metalink than googling so after sometimes you started to notice which note could be related wiht issues more clearly.. Just keep searching at metalink and focus what you are searching only.. ;)
If you could guide me I can do it my self and stop bothering you for some silly doubts.You dont bother me and also I belive the other forum users ;) We are also learning new information wiht user questions ;)
Regard
Helios

An alert message observered while appling latest patch MLR 10

Hi Gurus,
While applying latest patch MLR10 we observed an alert message as below
"Creating log file "C:\oracle\midtier\.patch_storage\8404955\Apply_8404955_05-21-
2009_15-44-27.log"
Conflicting patches: 8204237,
Patch(es) 8204237, conflict with the patch currently being installed (8404955).
If you continue, patch(es) 8204237, will be rolled back and the
new patch (8404955) will be installed.
Note: If the patch currently being installed (8404955) is rolled back,
it is recommended that the fixes being rolled back here (8204237, ) are reinstal
led.
If a merge of the new patch (8404955) and the conflicting patch(es)
8204237, is required, contact Oracle Support Services and request
a Merged patch.
Do you want to STOP?
Please respond Y|N
Should we rollback the previous patch before applying MLR10 ? or can i continue with patch application ?
Thanks in advance,
Regards,
Cema

Please continue the MLR10 patch installation, this message would appear for the all patch installation (of course, patch number would be different though).

ISE 1.2 patch 4 not retrieving groups

Since the update to ISE 1.2 patch 4 it isn't possible anymore to retrieve groups or attributes from the active directory. It keeps loading.
Anyone else experiencing this issue?
Regards,
Mathieu

The issue you are referring to is documented in the following CDETS:
CSCul84544: Retrieval of AD groups or attributes is failing
This is not yet resolved. May be resolved in a future patch
The workaround given in the CDETS is
Fix the DNS server so that the reverse DNS lookup matches
I believe there are other steps that can be taken to mitigate this but would need intervention from TAC

ISE 1.2.0.899 patch 1,2,3,4 with blackberry 9700

Hi, I'm using ISE 1.2.0.899 patch 1,2,3,4, and I am trying to use guest portal on blackberry 9700.
I verified that I am able to do 802.1x with blackberry.
I associated to ssid, and opened web browser, and I can see the guest portal.
However, when I clicked on "don't have account?" to creating guest ID, I could not go any further.
does anyone know if it's supported or not ? if it's working or not ?
I know in the network compatibility document for 1.2, there is no mention about blackberry.
does anyone know about this ?

Saurav Lodh, I did check the default time profile that is being used the sponsor. I even created a custom time profile to rule out any timeout on the Guest account, but even with the custom profile time the Guest account times out between 7 to 10 minutes and asks to re-authenticate again. I don't know if there is another place to look out for any timeouts, or is it maybe a bug with this version of ISE, but I couldn't find anybody else having this same issue which makes me think that it has to be a setting that is causing this problem.

ISE 1.2.0.899 Patch 7

Hey guys I have ISE 1.2.0.899 with patch 7 installed in my environment, also I have a WLC 5508 running version 7.4.121.0. We are authenticating our user with ISE. We are having an issue with our Guest WLAN, after we create an account with the sponsor portal for our guests, they can log in and get to the internet, but after 7 to 10 minutes the guest user is ask to re-authenticate again. I check in the WLC to see if there is any timeout for our Guest WLAN, but there not. At this point we don't know what is causing this problem since it only happens with the Guest WLAN, the other WLAN for Users that authenticate with AD credentials works without any problems. Is anybody experiencing this same issue?

Saurav Lodh, I did check the default time profile that is being used the sponsor. I even created a custom time profile to rule out any timeout on the Guest account, but even with the custom profile time the Guest account times out between 7 to 10 minutes and asks to re-authenticate again. I don't know if there is another place to look out for any timeouts, or is it maybe a bug with this version of ISE, but I couldn't find anybody else having this same issue which makes me think that it has to be a setting that is causing this problem.

ISE 1.2 Patch 2 External RADIUS Server Sequence Broken?

Hi community,
We have upgraded our proof of concept ISE 1.2 lab to Patch level 2.
Our lab design includes the use of external RADIUS servers which we off-load certain authentication rules to.
To ensure resiliency of the external RADIUS service, we have two of these which we add to a RADIUS Server Sequence, the idea being that if the first in the list is unavailable, ISE will try the second and all will be well.
Now this worked for us in testing ISE 1.2, but I have noticed that after the upgrade to Patch 2 ISE is sending the majority RADIUS traffic to the first (failed) external RADIUS server, with only the odd RADIUS Access-Request to thte next in the list.
Anybody else come across this??
All helpful comments rated!
Many thanks, Ash.

I couldn't find any known issues with this feature. Could you please paste the screen shot of external radius sequence and configuration. Also, how are we determing that the first server in the sequence is DEAD?
~BR
Jatin Katyal
**Do rate helpful posts**

ISE 1.2 Patch 8 - Endpoints in GUI missing

I have a customer were we did a upgrade from patch 2 -> patch 8 the other day.
Now Endpoints and Endpoint Identity Groups are missing from GUI. MAB is still working so Its probably only GUI related.
This is for both AD users and the admin user.
We also tried to create an new user with new access and menu policies to force/jump start access to the GUI but with no luck.
Anyone seen this?

can you confirm , if you are able to see 'endpoints/ endpoint groups " in the conditions while creating authorization profiles?

Patch timings

Similar Messages

Maybe you are looking for