Patch to upgrade 10.2.0.1 to 10.2.0.3

Hi,
I'm upgrading from 9i to 10g from 32 bit Windows to 64 bit Windows system. During the upgrade process I didn't apply any patch and just installed the Oracle Database 10g release 2 (10.2.0.1) and performed the upgrade with the help of Oracle Database Upgrade Assistant. Almost everything is working fine, now I want to upgrade from 10.2.0.1 to 10.2.0.3. Can anybody tell me if it's okay to go ahead and apply "10g Release 2 (10.2.0.3) Patch Set 2 for Microsoft Windows x64 (patch number 5337014)" ?
Thanks,
KH

Yes, I'm trying to connect from the same client. There is no error in the patch installation log. And there's no error in the alert log either. On SQL Plus I just get this error whenever I try to connect.
ERROR: ORA-03113: end-of-file on communication channel
The only error I could find on the server was on O/S (windows 2003 server) event viewer and the error is.
Faulting application oracle.exe, version 10.2.0.3, faulting module oracle.exe, version 10.2.0.3, fault address 0x0000000000fe4249.
Any idea?
KH

Similar Messages

Patch for upgrading 10g AS from 10.1.2.0.2 to 10.1.2.1

Hi All,
I am in process of doing 10g AS integration with 11.5.10.2.
here as per documentation i have seen that this 10g AS has to upgrade
My 10g AS version is 10.1.2.0.2
The below msg is as per Oracle Documentation
If you are running Oracle Application Server 10g Release 2 (10.1.2.0.0) or Oracle Application Server 10g Release 2 (10.1.2.0.1) Standard Edition One, then apply the Oracle Application Server 10.1.2.1 patch before applying Oracle Application Server Portal Upgrade.
I have searched a lot in metalink for patch but no luck
So please let me know the right patch to upgrade my 10g AS from 10.1.2.0.2 to 10.1.2.1
Also any supporting document for this upgrade
Thanks in advance
Regards,
Bhanu Chander.

I have downloaded patch p5983622_10123_LINUX.zip
and first tried to upgrade infrastructure home
but while upgrading it says
oracle universal installer has detected that your database is version 10.1.0.4.2 before you can continue you must apply a required database patch set.
But in documentation i have seen
Supported Database Releases
The portal schema may be residing in an OracleAS Metadata Repository, or in a customer database. The database in which the portal schema resides must be one of the following supported releases:
Oracle Database 10g (10.1.0.4.2) or later
Please let me know what should i do now
Thanks in advance
Regards,
Bhanu Chander.yes, because the Infrastructure Database needs to be upgraded. And it is listed in the documentation of the same patch set.
In the Readme file for the patch set 3 (5983622 or p5983622_10123_LINUX) as you mentioned, please see Section 5. Before you begin applying this patch set
It reads the following:
"5.6 Applying the Oracle Database 10g Release 1 (10.1.0.5) Patch Set
The Oracle Database 10g Release 1 (10.1.0.5) patch set must be applied to all database instances (for both the Identity Management and Metadata Repository installation type and Metadata Repository only installation type) before applying OracleAS 10g Release 2 Patch Set 3. If OracleAS 10g Patch Set 2 (10.1.2.2.0) has been applied previously, then you do not have to apply the database patch."
hope that explains what you need to do. i.e, your infra DB version is 10.1.0.4.2 and needs to be upgraded to 10.1.0.5.
AMN

Patching and upgrading streams

We have streams set up between two sites. One site is primary and the second one would be secondary
or the standby system (without using DataGuard). When we go operational, which we haven't yet.
I am trying to determine how we would apply patches to the system. Again, if one is down for patches
the second site must be available. Can I have the two sites in different patches/upgrades ?
I would plan to do them with minimal down time. I've read where streams could push through the patch,
but have had people not recommend this as the outcome could be unpredictable.
Are there any systems out there using streams as their standby system ? How do you perform patch or
upgrade maintenance ?
Appreciate your comments.
Thank you.

Streams support different patch levels as long as you don't use a feature in the lower patchset that exists in the other one. So patch at you ease and don't look at streams. I would just avoid a dctionary build between the two patche session, even if I am confident it will cope with that. Just a conservatism reflex.

Where can I get Patch for upgrade SAP GUI 3.O to 3.5

Hi All,
Could you please let me know the patch to upgrade SAP GUI 3.O to 3.5.
Thanks in Advance.
Sridhar.

Hello Sridhar,
I think you should get the latest SAP GUI Version which is 6.40 from ftp://ftp.sap.com/pub/sapgui/.
Regards
Gregor

Patch to upgrade Oracle BI Apps 7.9.6.4

Hi All,
I would like to upgrade Oracle BI Applications from 7.9.6.3 to 7.9.6.4 version.
Could anyone suggest me the patch to upgrade BI Apps to 7.9.6.4?
Thanks,
Harish Nunna

download it from here
Oracle Business Intelligence 11g (11.1.1x) Downloads
Oracle Business Intelligence Applications, v. 7.9.6.4
- for Microsoft Windows x86 (32-bit):
Disk 1 (586,763,191 bytes) (cksum 3028733378)
Oracle Business Intelligence Data Warehouse Administration Console (11g)
Disk 1 (108,125,702 bytes)
mark if it helps

SP 09 patch level upgradation

Hello All,
We are planning for SP09 patch level upgradation.
I have below doubts.
1. What will happen to our modificaiton to the standard jsp page.
2. What will happen to our modification in the action classess and java classes.
Please help us by providing what all pre cautions we need to take before we do this patch level upgrade .
Thanks and Regards
Shanto Aloor

Hi,
After applying the patch , you will get integration conflicts in your DTR view in NWDS.
If there are any custom developments in the files where the patch is applied, those files will be listed in
the conflicting files. Here you need to resolve conflicts accepting the changes from batch but also keeping the custom code intact.
This activity needs to be done very carefully.
The standard java files will be updated , but will not be shown in conflicts. If you have customized any std classes make sure that you are using the latest one.
Regards
Antony

11.5.10.2 (patch 3480000) upgrade space & time needed?

I am currently working on an upgrade to 11.5.10.2 from 11.5.9 and I ran into a out of disk space issue. I have cleared up some, but I was wondering how much more is needed? The current unpacked directory for 3480000 is 18GB and I have a total of 8GB free now. I did read in the 11.5.10.2 install guide that 24GB is required but that is for a new install and does not reference this patch upgrade specifically. I know it backs up files during the patch, so the file size might be dependent of how much space you are using unless it only backs up specific files.
Also how much time does it require to run this patch? In looking for disk space requirements I have seen people reference 16 hour run times for this script, which is an issue since we remote in and the connection will time out if you don't focus on the window and move the mouse every ten minutes, otherwise you lose you connection and can't reconnect to the process that may or may not be running. (thus you can see the issue with something stopping in the middle).
Thanks for the input.

I thought maybe someone would have had an experience doing it that might know. To free up more disk space will require a major amount of shuffling files around over a very slow connection which I wanted to avoid if I could, but I didn't want to start the setup again without some idea if I had enough before I wait an hour just to find out I needed more.
This is a single server/single node setup. I am currently doing this in DEV and going through the process taking notes etc in order to reduce the downtime on PROD when I do the upgrade there. I will read the document you referenced. Thanks for your input.
Toolman

ABAP and Kernel Patches for Upgrade and Conversion in 4.6C

Hi,
We are in a process of upgrade and unicode conversion for the source release 4.6C (Kernel 46D_EXT Patch 2225).
"Combined Upgrade&Unicode Conversion Guide" for "SAP Basis 4.6C u2192 SAP NetWeaver 7.0 application Server ABAP Unicode Including Enhancement Package 1 Support Package 01 - 06" , In Software Requirements step, it says
"3. Import 4.6D Kernel patch 2326 from SAP Service Marketplace according to SAP Note 19466"
We wanted to know whether "IT IS ABSOLUTELY NECCESSARY TO GO FOR THE KERNEL PATCH 2326". We dont have "EBCIDIC code pages" in our MDMP system.
We need to know becauase we are also doing OS migration from AIX to Sun and this step will add to our production downtime.
Please advice what are the other causes we should go for the kernel 2326.
Regards

Hello Mr. Nils Buerckel,
Thanks for the reply.
We wanted to be very sure whether we should used Kernel 46D Kernel patch 2326 (As it is specifically mentioned in the SAP CU&UC guide and in SAP Note 867193, It is mentioned that "This patch contains enhancements that are required to execute the "INDX Analysis" scan)
OR
Can we go for the latest kernel patch avaialable at market place? And Will the latest kernel patch also contains the "enhancements that are required to execute the "INDX Analysis" ?
Please reply
Thanks

Collaboration rooms not showing up in the rooms tab after patch 34 upgrade

Hi,
We recently upgrade our EP6 SP2 Patch 5 CM Patch 5 Hotfix 4 to Patch 34.
After the patch 34, we do not see our collaboration rooms in the rooms tab. We can access the rooms from the email generated when we created the room, but when we go to rooms tab we do not see any rooms in the list.
Any help would be a great help
Ravi

Hi Ravi,
this <i>sounds</i> like the behaviour when TREX is used for the room overview (and the index isn't complete when calling the iView). From SAP notes (877937), this on SP2 should be the case from P3<b>5</b> on. I had P33 and moved directly to P35, so I cannot say if the note may be wrong and this was eventually introduced with P34. At least, check the settings. See http://help.sap.com/saphelp_nw04/helpdata/en/6b/4e9442c22d1131e10000000a1550b0/frameset.htm for details.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

Patch for upgrading OBIEE 11.1.1.5.0 to 11.1.1.6 for OBIA 7.6.9.4

Hi,
We have installed OBIEE 11.1.1.5 and installed OBIA 7.6.9.4.
But when we try to open RPD file it gives error of compatibility.
Can anyone tell me what is the Patch number which can upgrade OBIEE to 11.1.1.6
Thanks In Advacne,
Ankit

It has to be more than 11.1.1.6.4+ for BI apps 7.9.6.4
Check this certification matrix from Oracle.
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fwww.oracle.com%2Ftechnetwork%2Fmiddleware%2Fbi-applications%2Fbiapps7964cert-matrix-1891451.xls&ei=OVucUf7nI9HjrAeAkoGgDQ&usg=AFQjCNFpBX79KDDbfKsXqW3pL5RQgknnfQ&sig2=A7rBJwbMXKXdkJHP7NfFBw&bvm=bv.46751780,d.bmk
Also
Check this note ID from oracle support you will have your answer.
OBIEE 11g: Required and Recommended Patches and Patch Sets [ID 1488475.1]
Mark as correct,
Regards,
Veeresh Rayan

Mandatory Patches for upgrade

We are in process for upgrading 8.1.7.4 (32 bit) to 10.2.0.4 (64 bit) on AIX . We downloaded so far Base 10.2.0.1 and patchset 10.2.0.4 plus latest CPU patch. Does anybody knows if any Oracle recommended Mandatory Patches out there so we could apply before database upgrade.
Thanks.

I end up opening TAR with Oracle and they send me steps on how to find list of Recommended Patches.
Now to find the recommended patches on 10.2.0.4.0 do the following
1. Log into metalink.
2. Click on the tab patches and updates
3. Click on the link "Oracle Database" under "Recommended Patches"
4. Select the release as "10.2.0.4.0" and platform as "IBM AIX Based Systems (64-bit)"
5. Click on GO. This will list you the recommended patches.

Need patch to upgrade Oracle Client 10.2.0.1 to 10.2.0.4

Hi all
Please provide me the link to download the client 10.2.04 or patch details to upgrade the client from 10.2.0.1 to 10.2.0.4
Thanks!

Click on following link :-
https://updates.oracle.com/Orion/QuickLinks/process_form?type=nonapps&urlc=v1.2~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
Edited by: Girish on May 25, 2011 3:50 AM

Can't install cc-patches after upgrading to windows 8.1

Hi Adobe-Team,
after upgrading to windows 8.1. I can't install updates and patches of the creative cload programms. I'm able to uninstall programms. I'm able to install programms, but i cant't patche them. Got this message: "Installation erfolgreiche, aber Fehler beim Patch (U44M1I210). I've no idea what to try further more.
Thanks for your help
Andreas

Hi Andreas,
Error Code: U44M1I210 means failed to extract the downloaded ZIP file of update.
Please follow the instructions specified on following kb doc and see if it helps -
http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
Let us know if it does not solve your problem.
Regards,

ACS 4.2.0.124.4 patch, cant upgrade

upgrade from 4.2.0.124 to latest cumulative patch:
csupdate.exe is not a valid win32 application

Hi Sobolev,
Before upgrading to patch 4, stop all the ACS services.
Extract zip file in ACS_INSTALL_DIR to replace with the new files.
Then Navigate to ACS_INSTALL_DIR\bin\ from command prompt and execute CSUpdate.exe -upgrade "ACS_INSTALL_DIR\CSDB\upgrade.dat".
[ Eg: C:\Program Files\Ciscosecure Acs v4.2\bin>CSUpdate.exe -upgrade "C:\Program Files\Ciscosecure Acs
v4.2\CSDB\upgrade.dat" ]
Note: Put the path in double quotes ("") if there are any spaces in the path name
Still if you face any problem, please revert back.
Thanks,
Kasthuri

Patch level Upgrade Error

Dear All,
I am facing one problem at the time of Patch Level 08 Upgrade, Currently I am using SAP B1 2007 B PL00, At the time of Connection with SQL Server for SBO-COMMON Upgrade System throughing me bellow error
The connection to the specified server has failed. Check your password and that the server exist on the network
I had verified SQL User ID and Password.
Thanks & Regards,
Siddique Shaikh.

Hi,
As you are using SAP B1 2007B PL00,it is not supported with MS SQL server 2008.
Only as 2007B PL10 MS SQL Server 2008 is supported,i think this is the cause of your issue.
Kinldy the check the supported platform from the below link,under product availability
https://websmp210.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
Also check this note:1289748

Patch to upgrade 10.2.0.1 to 10.2.0.3

Similar Messages

Maybe you are looking for