Patch tool just blends, doesn't replace
I've seen tutorials about the patch tool, but my patch tool doesn't appear to do what the tutorials do...
I've read other threads about how this tool is supposed to blend near the edges to give a good result, but this is blending the whole thing. I've already deleted my prefs file by starting photoshop with ctrl alt shift pressed. I've also reset the tool. These screenshots were taken immediately after opening photoshop cs4 and deleting the prefs file. Can anyone tell me what to do to use the patch tool like it's shown? I'm not as interested in alternate methods to achieve the same result -- I've already used the clone stamp tool to do the job. But why doesn't my patch tool seem to work the way it should?
Curt Y - there are two options for the patch tool 'source' and 'destination'. You seem to be confused
Bruderbell, the patch tool works this way - it analyses areas OUTSIDE the selected area to make its decisions as to what to use to replace texture and color. Because your area it on the edge of the canvas, the only pixel data it has are your dark pixels. Its working correctly
To sort out your problem, start with the Clone Tool, make a loose clone over of the dark area. Then use the healing brush or the patch tool to make the transitions smoother, and eiliminate any tonal errors. With a little practice you will be able to achieve a perfect heal this way
Similar Messages
-
I'm using the magic wand to select an area I want to replace, then use the patch tool to find pixels to replace it with. It looks good in the preview but when I let go of the mouse, it seems to try and blend what used to be in the selection with the new pixels, rather than just replacing them like I want.
I read where your supposed to include some pixels outside of the area as well so I expanded the selection, but it still does too much blending. Is there any way to just have it replace and not blend?The patch tool has its limitations. With practice it can be quite handy in certain situations. As Freeagent says, try the Clone Stamp where the Patch won't hack it. It's much improved in CS4 too!
-
Patch tool leaving border.
Seems when I select something that should be easy enough to fix, meaning not by any edges and like a spec on the sky, that the patch tool would blend it nicely, but it's leavin an edge pattern for me.
I reset the tool, made sure it's on source as well. Everytime I patch tool something, I get a weird kind of border around the area I healed. The inside looks fine and is nicely done, but the pattern left kind of makes it pointless.
Wondering if anyone else had this problem? I thought resetting the tool would work, but it still does it.Your example isn't very good because you didn't use a background containing gradient and/or structures. Actually, you created a situation in which the patch tool does an excellent job.
What you probably are referring to is a "smudged" edge around your patch. This is just the way the patch tool works, it tries to blend in the edges and in doing so often blurs the edges. I don't know what kind of image you're working on, but try to use the clone and heal tools as much as you can (set those to rather "hard" too, or you'll notice them having the same fuzzy look at the edges like the patch tool. -
Patch Tool option bar - missing word "Mode"
The new Content Aware Move tool has the word Mode next to its drop down box on the options bar. The Patch tool has the word Patch next to its drop down. For consistency the word Patch on the patch tool options bar should be replaced with Mode. Ideally instead of Mode, they both could display the name of the tool, but I expect Content Aware Move takes up too much real estate.
"flying blind."
"You totally lost me there, and I have no clue as to what your last question means."
"I think I now know what you mean."
Evidently language is of difficulty for you.
Perhaps the Oxford dictionary can provide you with your much needed “sensible, meaningful” content.
According to the Oxford dictionary, a dialogue is to "Take part in a conversation or discussion to resolve a problem." It also states that a dialogue is "A discussion between two or more people or groups, especially one directed toward exploration of a particular subject or resolution of a problem.”
That IS the inherent nature of posts. A conversation is reciprocation. Questions, followed by more questions.
It is not difficult to understand.
"how to ask your questions correctly for quicker and better answers" is best actualized by simply asking.
Is it a Mac; is it not, etc.
That IS sufficient. That IS "quicker and better answers[ing]." That IS what a dialogue IS. And that IS actually what is "sensible," "meaningful," and "detailed."
The Oxford dictionary can best delineate and elucidate your lack of comprehension in what ACTUALLY “meaning” is.
As well as what is "sensible" AND "detailed."
By the way, am I being repetitive.
Still confused. Let the experts that do not require much explanation respond with "quicker and better answers" for both "sensible, complete" responses." They are not "lost," "blind," or provide "incomplete" drivel. -
Photoshop CS6 Patch Tool doesn't work correctly
When I use Patch Tool in Normal mode, photoshop leaves a transparent mark on the replacement area.
What the problem?
System Info
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 1995 MHz
Built-in memory: 3067 MB
Free memory: 1758 MB
Memory available to Photoshop: 1667 MB
Memory used by Photoshop: 83 %
Image tile size: 128K
Image cache levels: 1
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Mobility Radeon HD 3430
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 800, right: 1280
Video Card Number: 1
Video Card: ATI Mobility Radeon HD 3430
OpenCL Unavailable
Driver Version: 8.961.0.0
Driver Date: 20120405000000.000000-000
Video Card Driver: aticfx32.dll,aticfx32.dll,atiumdag.dll,atidxx32.dll,atiumdva.cap
Video Mode: 1280 x 800 x 4294967296 colors
Video Card Caption: ATI Mobility Radeon HD 3430
Video Card Memory: 256 MB
Video Rect Texture Size: 8192
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\Natio\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 40,8G, 8,54G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEWith other images same problem, no matter how large selection or small. There is always transparent silhouette of selection.
On other devices with the same images, tool work perfectly.
Sorry for my english. -
using Destination (and the blue grapelooking pattern) when I drag selection over the repair area, it's blurred and transparent looking. Not the patched it should be.
Transparent is NOT checked.
this is so aggravating. Can't find help anywhere. My book doesn't address how to stop this. Same thing if I try to use source.The Patch Tool uses the same or similar algorithms as the Spot Healing and Healing Brush, which means it is trying to blend with the underlying pixels. If you want a pure replacement, you can try using the Pattern Stamp Tool that is nested with the Clone Stamp.
I hope this addresses your question. -
In the past, I've successfully used the Patch Tool by selecting "New Selection" , & "Source.
Next, I would make a selection of the area I wished to fill/repair; then Lt-Click/Drag the selection to an area of the image that I wished to use as a "fill, and when It looked OK, release the Lt Click button, and the "original" selection area would "fill" with the area I had dragged to.
With CS5, I do the same thing, but when I release the Mouse button, the dragged selection disappears, as it should, but the "original" selection area does not fill. It remains selected, but is unchanged as to content, as if the final fill execution has failed.
I'm probably doing something wrong, but it's escaping me?
LeighSomething must have changed.....
I've had the same problem for nearly a year and haven't found a solution.
Just to reiterate:
On a single layer, whether backgroung, duplicate of background or another, and trying to patch an area ON THAT LAYER,
with Source checked, and Transparent NOT checked, what happens when I move the patch is this....
the selected area changes to match the underlying pixels until I release the mouse. On release, the patched area becomes a blend of the original selection and the area I wanted to use as a patch.
It is also apparent that the edges are feathered.
In short, it doesn't work well.
I've searched the Adobe help site (forums, etc.) and Google, and found many descriptions of trouble with the Patch Tool, but no real solutions.
I have continuously updated (12.0.4 x64) and deleted my Preferences, and reset all the tools. To no avail.
The Patch Tool was very useful once. But it's not working now. Not for me on my iBook.
If anyone has a definite fix, or any other suggestions, I'd love to hear them!
Thanks,
Carl
[email protected] -
In Photoshop CS4- using patch tool-
I select an area I want to repair, click source, then drag to the area I want to use to make the repair and release. It looks great in the preview, before I release. As soon as I release it disappears.
For example, after using the automate tool to combine multiple images into a panarama with a transparent background there are a few blank areas. I select one of the blank areas with the patch tool, click source then drag to the area I want to use as the replacement and release. As soon as I release, it goes back to the transparent background. The transparent button is NOT selected.
This is a Windows Vista system, with NVIDIA GeForce 9600M GT video, If I try to do updates to CS4 is sas it is using the latest driver. Which it lists as version 11.0.2.
Any idea how to fix this?In photoshop cs4 the patch tool doesn't work on transparent areas.
In other words the area has to be opaque (not transparent)
If they are small areas you might try the Healing Brush Tool.
Or use the healing brush tool and/or clone stamp tool and then patch the area with the patch tool. -
Hi,
I am using the patch tool to patch (!) areas of an image. Instead of patching the selection into the image, PS4 blends it, so that some of the patch and some of the original image are visible. I've searched for a way to instruct PS4 to reduce the opacity but I can't find such an option. Is it possible to truly 'patch' and not 'blend' an area of an image?
Thanks for you help!Sorry...I only come here when having problems. I read more than post. ...most problems have already been resolved before I get here.
No so this one.
I just this moment went back to my old workstation.
ABIT IS7 Windows XP SP3 RADEON 9600 graphigs Card
ADOBE CS3 10.0.1
The Patch Tool blends perfectly...
On this workstation.. my New one.
ASUS P5B Deluxe with E6600 & 8gig Ram RADEON HD 3870 X2
Windows Ultimate SPK2 64bit
I have both CS3 10.0.1 & CS4 11.0.1 installed
Both exibit a failure to blend properly ...as priviously mentioned in this thread.
Again...I am back to my original thinking that it is a Hardware Related issue..and needs exploring
In my humble opinion, It would be good to poll those having issues and see.
MB processor OS & ver Graphics Adaptor and drivers & Photoshop ver
Respectfully Submitted
TMc -
Proper Use of the Healing Brush & Patch Tool
When using the Patch tool and Healing Brush tool to smooth skin, I cannot seem to avoid "grabbing" dark coloring from the clothing as I get close to the edge of the skin. I have the sample source anchored in the middle of an area far away from the clothing edge, but if I get close to the clothing it pulls from that color and "bleeds" into my healing area.
I've tried to view tutorials on the Healing Brush, but haven't found anything that addresses this specific condition, just standard "how to" stuff.
Thank you for any advise and direction here.I'll give you a little trick as you can see the preview of the are you are patching it is possible to do a patch clone sort to speak.
it works like this.
http://mysite.verizon.net/wzphoto/patch.mov
if the angle of the clothes do not match you can copy a section and paste and then rotate the section to match and use it as the source for
the patch tool.
BTW the idea is that you have to include the contrasting areas so the do not cause a blending. even if the darker area needs no repair. -
Patch tool, why mess with something that wasn't broken?
I edit a large amount of product photography and I used to use the patch tool frequently to fix areas that needed cleaned up that had some sort of detail. Below you will find an image I was correcting and the result. I was not trying to get rid of the little nub, just replace it with one that looked better.
I tried to use the content replace tool as well and it not only changed the area I was trying to correct but the part I was taking from. It also left a weird shape around the part I replaced. See images below.
-original -after replace toolThe above edit was done in CS5.
Below is CS6. Instead of recreating the detail, it was eliminated. -
CS5, Photoshop. I want to replace a short portion of the top of a black turtleneck sweater with the adjacent skin color. In other words, lower the height of the turtleneck on the neck. Skin color is very light white. I have tried th patch tool, but it does not change the balck to the white skin color. It just lightens the black slightly. Any ideas on how to replace the balck with the light white?
Try the Cloning Tool, or selection then copy/paste and move the layer with the pasted pixels.
-Noel -
My Elements 9 cropping tool just started cropping the entire image away today. Just got an Adobe air update last night. This is nothing I have done. All that's left after using my crop tool is a .jpg symbol. Please help.
First try resetting the tool. If that doesn't work delete the settings file by holding down Ctrl+Alt+Shift as you start PSE and answering the prompt to delete.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
Need help with Patch Tool in CS5
I am having a problem using the patch tool in Photoshop CS5. I click on the Patch Tool and select the Source option from the upper tool bar. Then I circle a gray area in the background of my photo and, holding down the left mouse button, I drag the selection to a black area in the background and release the mouse button. Instead of turning the selected area black it just makes the area slightly darker than it was originally. I just don’t understand why I can’t use the patch tool and any help would be appreciated.
Thank you very much for these suggestions. Robert
Noel Carboni <[email protected]> wrote:
Noel Carboni http://forums.adobe.com/people/Noel+Carboni created the discussion
"Re: Need help with Patch Tool in CS5"
To view the discussion, visit: http://forums.adobe.com/message/4308270#4308270 -
My Smudge Tool isnt blending correctly like it should?
My smudge tool isn't working correctly like it should in Photoshop cs5. Can someone help me?
Heres an example. :When i do that, the image just messes up, My intention , for example. say i wanted to do a makeup edit, and i wanted to the picture to be more realistic so i added black around the noise and used the smudge tool to blend in the mark to look like it was drawn in a bit. Instead of doing that the smudge tool just goes one straight direction just as in the picture above.
Maybe you are looking for
-
I'm really frustrated with iTunes!! Please help
iTunes has been prompting me to download the new version for months, but after what happened to me the last time I was very wary of upgrading (see http://forum.digitalspy.co.uk/board...ad.php?t=241985 ) Today I decided it was probably just an unfortu
-
I just installed my itunes Cd, I uploaded 15 CDs and now when I connect my IPOD into my laptop, it will connect, the Itunes will state that it has updated my IPOD and then it disconnects the IPOD automatically. I can no longer put music on my IPOD or
-
Phoneme mode for non-English voices in OS X 10.7
Hi! I need to make the text-to-speech synthesizer speak via phoneme input method with non-English voices. Is it possible? As far as I can see, only English voices support phoneme input method. I'm using the OS X 10.7 voices. Do I need to set the spee
-
Can I make a LOB segment tablespace 'READ ONLY' so no backup?
Greetings Environment: Oracle 11.2.0.3 on Solaris 10.5 LOB newbie here. I am currently supporting a database, but not the application, that is loading fairly large XML files into CLOB columns. Today I have 121 LOBSEGMENTs taking up about 1GB of space
-
ApplescriptObjC Get parent folder of file(s) (using container)
I'm trying to bring this little script into ApplescriptObjC At the moment I get an error that I can only assume is to do with the alias? But i'm not sure how to correct this. set resultFiles to (choose file with prompt "Please select images:" with mu