Patch Update Problem
HI all
On applying patch updates , we are facing problem
in patch 20. The error is
"1 duplicate key error during insert into table TABDIRDEVC occured".
Regards
JOhn
Hi John,
first of all, this might be the wrong sub-forum to post your question.
And then, you did not supply any details on which software you applying the patch on ...
Please give the right information in the right forum, that way others can help you.
Similar Messages
-
Fresh solaris 10 x86 install patch update problems 119060-17 ...
Just yesterday, i installed a fresh Solaris 10 x86 onto some pc hardware. After getting solaris installed and issues with my network card, i downloaded and installed the free version of the update manager 1.0.x. Next, i proceeded to update all the general patches for the solaris 10 system. I started with the command 'pprosvc -i' from a terminal. It then proceeded to download and validate a bunch of patches successfully until it hit the following 3 patches:
119060-17 ---- X11 6.6.2_x86: Xsun patch
122213-10 ---- GNOME 2.6.0_x86: GNOME Desktop Patch
122912-02 ---- SunOS 5.10_x86: Apache 1.3 Patch
All 3 failed some kind of validation and then crashed the pprosvc program, at which point it exited with the following error:
122912-02 cannot be validated
119060-17 cannot be validated
122912-02 cannot be validated
Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digital signature(s).
I also tried to use the GUI Update Manager to update, hoping the problem was isolated to pprosvc, but that problem was also in the GUI with a similar error message:
Error occurred...The detailed error message is: Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digitial signature(s)
Anyone know why Sun's update patch process is so troublesome?
Getting Tired of Solaris Updates...
I should mention that this is the free solaris 10 x86 install and i don't have a service contract with Sun. If this problem persists, i don't think i'll get one, as i see only further problems after buying one.
tired and confusedHi,
There is an issue with this that is currently being investigated. There is another thread that may shed some light on what is happening here;
http://forum.sun.com/jive/forum.jspa?forumID=316
Thread title is : Sun UC, Digitally Signed Patches Using New Verisign Certificates
In the short-term please ensure that the patch mentioned in it is installed.
To quote part of mentioned thread above:
"Once the Sun Update Connection client software is upgraded with patch 121118-06 (SPARC) or 121119-06 (x86/x64) or later revisions normal behavior will resume. "
If this fails to resolve your problem, would you be kind enough to post the output of the following command for analysis please;
# showrev -p | egrep -e '121454|121119|120336|121082|121564|122232|119789'
Sincerely,
Moderator.
Message was edited by:
ForumModerator -
Sunfire x4200 Solaris 6/06 install/patch update problem - corrupts OS!
Hi
this is frusterating, I have a x4200, which when installing 'end user' solaris 10, boots/works just fine.
As part of best practice, I use sun's 'update manager' and it goes and downloads and installs. As normal a 'reboot' is required to finish installing some updates, and when it does this, after it installs and tries to reboot, i get a nasty error:
panic: cannot mount boot archive
I've done NOTHING besides load the base OS and patch, no other customization.
Why is this doing this?
I've tried to rebuild the boot archive info via:
bootadm update-archive -R /a
but this still fails, and my only option is to reboot.
anyone else seen/encountered this?I initially tried the bootadm update-archive -R /a you tried, and it didn't work.
When I tried the 2nd time I used:
bootadm update-archive -f -R /a
and that worked. It restored the bootarchive from a 72k file to a 28M file and I could boot the machine properly after that. -
Problem in applying Jul05 Critical Patch Update(4445852) for win200 server
Hi,
Anyone know the below problem, recently oracle had released the Jul05 Critical Patch Updates. I managed to download the patch (4445852) and latest Opatch version from the oracle metalink website. When i tried to run %ORACLE_HOME\OPatch\opatch apply, i encountered the below error message. Anyone encountered the below message, please let me know the resolution. Any comments and advise are welcome.
Thank You..
OPatch encounters the following issues during file patching:
The following files had problems with being patched:
1. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\oraxsd9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
2. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\oraunls9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
3. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\orannzsbb9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
4. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\orageneric9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
5. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\oraxml9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
6. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\oracommon9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
7. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\oracore9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
8. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\orapls9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
9. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\orasql9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
10. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\oraclient9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
11. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\orannts9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
12. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\oranls9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]
13. e:\oracle9i\9.2\bin
[ Couldn't copy e:\oracle9i\patch_install\4445852\files\bin\oran9.dll to e:\oracle9i\9.2\bin from E:/oracle9i/patch_install/4445852. ]Whenever I've encountered this problem, I've renamed the dll that had errors to dll.o. Not a good idea for rolling back, BUT for me there is no going back. :)
However, I found the following on MetaLink, you may want to give this a try.
The best way I have found to avoid these cannot write to DLL errors is:
1. Download listdlls.exe from:
http://www.sysinternals.com/ntw2k/freeware/listdlls.shtml
2. Shutdown all Oracle services in services panel
3. reboot machine
4. listdlls > todaysdll.txt
5. grep -i "ora" todaysdll.txt
(If you do not have a grep utility [i.e. GNU web site] you can search the file with a text editor)
6. If there are any hits, shutdown whatever program/service that owns it and repeat steps 4 & 5.
HTH -
Webi scheduling error in BO 4.0 SP04 after security patch updates in windows server 2008 R2
We are getting below error in BO 4.0 SP04 Web Intelligence report scheduling after security patch updates in windows server 2008 R2
while trying to invoke the method com.businessobjects.sdk.core.server.IServer.getServerContext() of an object returned from com.businessobjects.rebean.wi.impl.services.DocumentInstanceManagementServiceImpl.getServer(com.businessobjects.sdk.core.context.IContext, com.businessobjects.rebean.wi.model.engine.IDocumentInstance)
We have reverted back security patch but still giving above scheduling problem in BO 4.0 SP04 WebI and we can view and refresh report.
Is there any way to fix the scheduling problem in BO 4.0 SP04 WebI?HI,
Check SAP notes if they will help you.
1934855 - Scheduled Web Intelligence documents fail with com.businessobjects.sdk.core.server Error
1916443 - Scheduling Web Intellignce reports which are having long names to excel and pdf fails.
1792921 - Unable to schedule Webi documents in Excel or PDF format -
Function module "GM_DOCUMENT_REVERSE" not found. after Patch Update
Hi Abapers/Basis
After patch update i am not able to do FBCJ reversal entry getting below error message.
Runtime Errors CALL_FUNCTION_NOT_FOUND
Exception CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 25.05.2011 14:43:26
Short text
Function module "GM_DOCUMENT_REVERSE" not found.
What happened?
The function module "GM_DOCUMENT_REVERSE" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPLRWCL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "CALL_DISPATCHER_STORNO_R" "(FORM)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLRWCL" contains the CALL FUNCTION statement.
The name of the function module to be called is "GM_DOCUMENT_REVERSE".
No function module exists with the name "GM_DOCUMENT_REVERSE".
All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attention to
upper/lower case and underscores ("_").
or
b) Transport error
c) In the case of an enqueue/dequeue module,
the lock object may not have been activated
(ABAP/4 Dictionary).
How to correct the error
Check the last transports to the SAP System.
Is the program "SAPLRWCL" currently being changed?
If an enqueue/dequeue module is involved, is the activation
of the lock object missing in the ABAP/4 Dictionary?
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CALL_FUNCTION_NOT_FOUND" "CX_SY_DYN_CALL_ILLEGAL_FUNC"
"SAPLRWCL" or "LRWCLF10"
"CALL_DISPATCHER_STORNO_R"
Function modules with names similar to "GM_DOCUMENT_REVERSE":
GM_DOCUMENT_CLOSE
GM_DOCUMENT_RECORD
GM_DOCUMENT_DELETE
GM_DOCUMENT_POST
GM_DOCUMENT_CHECK
G_DOCUMENT_RECORD
GJ_DOCUMENT_RECORD
GM_DOCUMENT_PROJECT
GET_DOCUMENTS
GM_DOCUMENT_DISPLAY
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Moderator message: please don't just dump your dumps, search for SAP notes or open a call with SAP instead.
Edited by: Thomas Zloch on May 25, 2011 2:16 PMHi Karthik,
Thank you for ur reply.
I did not implement any user exit/ badi. Dump is saying that my smarform function module does not exist in the se37 library.
I have excuted my form through se38, that time is working fine. When i tried through output type it is going to dump.
Regards,
Kusuma. -
Patching/updating Java Applications in the WebLogic environment.
Hi All,
I'd like to get some feedback on our process and hear if there is some better/different
ideas out there on how to handle patching/upgrading java applications in the WebLogic
environment.
Here is our process:
1) We build using ANT our Enterprise application.
2) We deploy our application using InstallAnywhere to drop the structure into
an environment.
If a patch or update is needed, we again build the Patch/Update using ANT, generating
checksums for each file in every ear/war/jar file as well as any supporting files
(.xml, .properties, .sh, etc.) used in the production structure. We then compare
checksums against what is in production and come up with PATCH_(ear/war/jar) files
with only the changed classes and duplicate production structure with the changed
supporting files.
Using ANT scripts and InstallAnywhere, we backup the files to be replaced in production,
overwrite supporting files, extract packages (ear/war/jar), overwrite classes
with new ones, re-package the ear/war/jar files into production environment and
restart the server.
We patch at a class level due to the configuration settings internal to the package
files (ear/war/jar) that we don't want the customer to have to re-configure everytime
we do a partial release.
Right now, the whole process is automated except the creation of the Patch ANT
script that extracts, overwrites updated classes, updates manifests, then re-packages.
Any ideas on improvements or complete re-engineering of our process to help so
we can get closer to 100% automation?
Thanks,
JohnThe chances of two applications running at exactly the same time are miniscule. If they each have a connection to the database, and are both trying to modify the same table, then chances are one will be slightly after the other its changes would be committed last. In the case where one might delete a row just before another tries to access that row, you're going to have some sort of problem. However, those circumstances are pretty rare, and even so, some small amount of exception handling can deal with them gracefully.
-
Error when try to install CPU - Critical Patch Update with OPatch
Hello gurus,
I´m faccing with a problem... After I update the patch set to 10.2.0.4 and install the interim patches for Linux X86_64 now I´m trying to import/install the Oracle Critical Patch Update - Oracle CPU patch!!
I´m trying to import it with OPatch, and I already update this OPatch tool for the last version even before proceeding with installation of Oracle CPU!
I've tried to import it by two methods. The first I tried to apply as described in the relevant README file inside of CPU patch directory, and I used in this case the following command:
redhatsap:orajmd> unzip p9119226_10204_<platform>.zip
redhatsap:orajmd> cd 9119226
redhatsap:orajmd> opatch napply -skip_subset -skip_duplicate
opatch: Command not found
After that previous error, I tried again but now with other method that is described in note 839182 (Installing patches using OPatch) with the following command:
redhatsap:orajmd> cd 9119226
redhatsap:orajmd> $ORACLE_HOME/OPatch/opatch apply
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Invoking OPatch 10.2.0.4.5
Oracle Interim Patch Installer version 10.2.0.4.5
Copyright (c) 2008, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/JMD/102_64
Central Inventory : /oracle/oraInventory
from : /etc/oraInst.loc
OPatch version : 10.2.0.4.5
OUI version : 10.2.0.4.0
OUI location : /oracle/JMD/102_64/oui
Log file location : /oracle/JMD/102_64/cfgtoollogs/opatch/opatch2010-04-19_01-49-17AM.log
Patch history file: /oracle/JMD/102_64/cfgtoollogs/opatch/opatch_history.txt
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /oracle/JMD/102_64/9119226
Details = PatchObject constructor: Input file "/oracle/JMD/102_64/9119226/etc/config/actions" or "/oracle/JMD/102_64/9119226/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/oracle/JMD/102_64/9119226/etc/config/actions" or "/oracle/JMD/102_64/9119226/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
Can you help me please?
Best regards
João Dimas - PortugalHello again Joe Bo... and all of others,
I´m with a doubt after installing the CPU patch, which is related to post-installation tasks. I´m in this momment install the SAP System and it was during this installation that sapinst asked me to install the database and all other activities after this installation that are related to the database, for example, the updating of database patches.
At README file in chapter 3.3.2 Post Installation Instructions is described the following:
After installing the patch, perform the following actions:
1.Load modified .sql files into the database, as explained in Section 3.3.2.1.
2.Recompile views in the database, if necessary, as explained in Section 3.3.2.2.
In this momment, as you certainly know, I still don´t have a database because the sap system isn´t yet totally installed (I´m in phase 8 of sapinst wizard).
I only have to do this "Post Installation Tasks" when I have a database, this database will be created after that phase 8 - so now I don´t need to perform the post steps... am I right?
Thanks in advance,
João Dimas - Portugal -
Photoshop CC2014.2 won't install patch updater. Error code U44M2P7
This is super frustrating. Creative Cloud just sent out a updates to all my software. Photoshop, Indesign, Illustrator, Flash, etc... but it will not install the updates to any of them. I get errors on all of them.
Here's what I've tried
• Uninstalling and reinstalling. The install goes fine till I get to the Patch updater. That's when I get an error on all the software.
• I've logged in as root user and that doesn't work.
• I extracted the update to run manually and still get an errors.
If I try to do the update from the CC app, I get this error:
"Unable to extract the downloaded Files." (U44M1|210)
The error log doesn't really help me. This is the summary
- 1 fatal error(s), 0 error(s)
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | OSX version: 10.9.5
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 |
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | ----------- Payload: Adobe Photoshop CC 2014 Core_15.2_AdobePhotoshop15-Core 15.2.0.0 {3CC59EEB-0FCB-4C92-B432-9B03E0318F28} -----------
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | FATAL: DS003: Installer package might be corrupt. Re-download the installer and try again. (Cannot extract '/Volumes/Adobe Photoshop CC 2014 2/Adobe Photoshop CC 2014/payloads/AdobePhotoshop15-Core-260914050059/AdobePhotoshop15-Core-260914050059.zip' to '/Library/Application Support/Adobe/Installers/adobeTemp/{3CC59EEB-0FCB-4C92-B432-9B03E0318F28}'. Error: )
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 |
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | Please search the above error string(s) to find when the error occurred.
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | These errors resulted in installer Exit Code mentioned below.
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | -------------------------------------------------------------------------------------
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 |
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | Exit Code: 7 - Unable to complete Silent workflow.
10/08/14 09:44:47:083 | [INFO] | | OOBE | DE | | | | 1857468 | Please see specific errors for troubleshooting. For example, ERROR: DS003 ...
Any insight to help complete this update would be greatly appreciated.Then please restart your machine and try installing this update again from the Root user account. (http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html)
Please ensure that you have admin priviliges for following folder:
/Library/Application Support/Adobe/Installers
If you still face this problem then please provide us with PS 15.2 installer logs file at
For Mac:
"Library/Logs/Adobe",
This would help us in resolving the issue.
Please mail it to [email protected]
Thanks,
Ashutosh -
Not receiving Critical Patch Update E-mail Notification Alerts - used to
I am no longer receiving the Security Alert Email Notifications for the Oracle Critical Patch Updates. Also, the instructions on the OTN web page are no longer valid (no longer a Opt-In category). I have the box checked to receive the emails, but for some reason they are no longer being sent. I have checked my "Junk and SPAM" mail folders - not there and they are not being filtered by our company email program. I have a non-technical SR opened with support, but they are not understanding the issue.
On the
http://www.oracle.com/technetwork/topics/security/alerts-086861.html#SecurityAlerts page, there is a link (Click here for instructions on how to configure email notifications.) which takes you to
http://www.oracle.com/technetwork/topics/security/securityemail-090378.html
This is the URL that we go to to setup or subscribe to Critical Patch Update Alert emails
Subscribe to Critical Patch Update Alert E-mails
When going to my account, there is no longer the the Opt-in to Oracle Communications section
I have
Subscription Center (Under Subscription Center is)
Oracle Technology News (under Oracle Technology News is a checkbox for)
Oracle Security Alerts - Get the latest Security Alerts issued by Oracle as they become available.
This box is checked and has been for a very long time, but stopped getting the emails. I am not the only DBA who is having this issue where I work - several others have the same problem and it looks like there are more DBA's in the Oracle Community who have same problem
Thanks for any assistance.Also see this related thread - Please help me to get my quarterly CPU alert notification send to me
Srini -
Static library not accessed properly after Solaris Kernel patch update !
Hi,
We are facing a sever issue in our application after our customer updated the Solaris 10 kernel patch u9 to u10.
We have two static libraries libdlib.a and libDLIB.a, with exactly same code base, but these two libraries are scattered across the code base and linked by many shared objects in our application.
However, one of the shared objects that links to "libdlib.a" library tries to access a function from "libDLIB.a". This behavior is causing a crash at a later point, since that shared object is supposed to access the function from "libdlib.a". Moreover, we found this is happening through the use of dbx.
I'm unable to understand why this problem surfaced after kernel patch update, though still the shared object works fine on Solaris 10 u9 patch.
Flow is something like this :
1. syslogrecorder.so gets loaded by one of the processes.
2. syslogrecorder.so is linked to "libdlib.a" at compile time, so it uses "libdlib.a" function DLIB_LoadLibrary and gets a handle to all the function pointers of the loaded library ( The purpose of DLIB_LoadLibrary is to load a shared library dynamically using dlopen )
3. syslogrecorder.so tries to do a "dlsym" and to do that it needs access to the library handle which we got in previous call DLIB_LoadLibrary. So syslogrecorder.so calls another function from DLIB_ProcAddress, which actually gives back the access to the loaded shared library.
Here is a catch in step 3, it is supposed to call DLIB_ProcAddress from the libdlib.a but as we observed from dbx output it does so by calling DLIB_ProcAddress from libDLIB.a and hence fails to give back the access to loaded shared library, causing crash at a later point in code.
Can someone put some light here that why this could happen ??
Thanks
KuldeepTo clarify: You did not modify or rebuild any of your binaries, but after installing a kernel patch, the application stopped working. Most likely, something about your application depended on a accidental behavior of the runtime loader. That accidental behavior changed due to the patch, and your application failed.
For example, if there is a circular dependency among shared libraries, the loader will break the cycle at an arbitrary point to establish an initialization order. By accident, that order might work, in the sense of not causing a problem. A change to the loader could cause the cycle to be broken at a different point, and the resulting initialization order could cause a now-uninitialized object to be accessed. I'm not saying this is what is wrong, but this is an example of a dependency on accidental loader behavior.
Finding your actual problem will require tracing the sequence of operations leading up to the failure. You are more likely to find help in a Solaris linker forum. AFAIK, there are currently no Oracle forums for Solaris, and the old OpenSolaris forums have been converted to mailing lists. You can try the "tools-linking" list found on this page:
http://mail.opensolaris.org/mailman/listinfo
I also suggest you review the paper on best practices for using shared libraries written by Darryl Gove and myself:
http://www.oracle.com/technetwork/articles/servers-storage-admin/linkinglibraries-396782.html
If you have a service contract with Oracle, you can use your support channel to get more help.
Edited by: Steve_Clamage on May 18, 2012 3:21 PM -
Portal Logon Page image is not coming after patch update
Hi All,
I have recently updated my portal's patch from SP9 to SP10.
Due to this the portal logon Image is not showing.
How to solve this issue and what is the actual problem?
I have checked the logon folder where images are already there with the same name. Please help asap.
Thanks & Rgards,
Nikesh ShahNikesh,
With patch updates normally all standard SAP components are overwritten with the new par-, jar-files etc.
If you did your changes to the original logon par-file of SAP, it is overwritten.
If you used your own logon par-file, make sure this one is called upon login (Check the Visual Admin tool). Perhaps after checking/comparing to the new logon par-file for any changes.
Hope this helps.
Regards,
Alain -
I have creative suite 5.5 and have recently updated my iMac to Yosemite. Now I can't open the adobe apps. I have done the suggested Java update and mac OS X Java patch update.. still no go. Can you HELP?
uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) the install using the installation files. do not migrate adobe programs.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
How to set notification for latest patch updates from Oracle?
Is there a link to receive notification from Oracle about the latest patch updates on OBIEE or BI Apps?
Hi Tugdual,
Thanks for your great information. With your information i was resolve my one problem.
But however i have one more problem my application uses jni dll file called webcomponentjni.dll.
In 10.1.2 there was a option in OC4J Containers property
OC4J Container -> Administraton -> Server Property Page -> Environment Variables when i add path to the location of my webcomponentjni.dll it used to work fine.
But in 10.1.3 i don't have that option so i have added in opmn.xml file as follows
-Djava.library.path=<location> but it is not working.
When i try to browse the application it is giving the following error
Message:WCA startup failed with the following message: no webcomponentjni in java.library.path
Have you encountered such problems so far.
- Rajendra P S. -
SSL patch update has caused many issues with my iPhone 5c
Since the patch update completed, my iPhone is acting ridiculous. I cannot use safari. Every time I try to search something, it tells me it cannot connect to server. I also cannot delete voicemails. Once I delete, the phone freezes and the voicemail is not deleted. It comes back from deleted messages. When I hit the phone toggle button, it opens up my recent call list but it opens to the calls from Thursday, the day I did the update. It also deleted every text message that I had sent that day from my text history. I have shut the phone down, what other options do I have?
I have actually talked to a couple people that I know that have the 5c and it seems like it is a hit or miss. Some people have problems with the blue ones, im having issues with the white one, some people have no issues att all. COnsider your son luck that he has no problems. I have had problems with 3 different whote 5c over the coarse of 4 months now and contuining to have problems.
Maybe you are looking for
-
While installing the iTunes, i am getting the error
when i am trying to install the iTunes in to my laptap(Win7), after completion of the installation, i am getting one pop-up-window saying that "iTunes was not propery installed. if you wish to import or burn cds you nedd to reinstall iTunes" Could y
-
The Mystery Of Free Public WiFi
Almost everywhere I travel, I see a Computer-to-Computer network listed call 'Free Public Wi-Fi'. Clearly that's not what it is (oh, and I can see it now, in some hotel in the armpit of Ohio), so I guess it must be some bizarre PC phenomenon that has
-
hi, I wish to know the process of recovering deleted opportunities. also in general what all objects can be recovered once deleted e.g transactions, products, BP etc. any link to some useful documentation will be helpful thanks RH
-
Why is my email time an hour ahead of actual time and how do I reset it?
When I send an email, the time stamp is one hour ahead of actual time. How do I reset the time?
-
Can't connect to Easy VPN Server using Windows 7 inbuilt VPN client
Hi Everyone, I would like your help to resolve a vpn issue I am having with my Windows 7 inbuilt vpn client. I am trying to connect to an Easy vpn server on a Cisco 2951 ISR G2. Well, I can connect using Cisco vpn client v5.07 but I can't connect usi