Patch Wizard - Support Filter question

I've installed the Support Filter on my 11.5.10 CU2 system and ran it as a test to make sure my system would qualify for Extended Support.
The overall status of the job shows Recommended=0 and New Code level=0 so at first appearance it looks good.
However if I check the job status and sub requests of my 'Support' job I see a couple of requests that ended with warning.
The first job 'Submit Recommended Patches (wrapper) shows this in the Request Log:
**WARNING: Some patch information not uploaded correctly**
Patches which encountered problems during Upload:
1. 2147366
2. 2372715
If I look a little closer I see there are some INFO lines that say:
INFO: The patch does not contain f2147366.ldt since it is an old patch. Patch Advisor cannot be used for this patch.
INFO: The patch does not contain f2372715.ldt since it is an old patch. Patch Advisor cannot be used for this patch.
The jobs after that finish as Completed Normal" but the last job PWSTATUSTRACKER ends with 'warning' and the request logs shows:
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
Status Tracker: This request set is the dummy request to track the status of individual requests and assign the right status to the request set
Current request id : 783826
Current request set id : 783544
783783 Normal
783779 Normal
783776 Normal
783774 Normal
783771 Normal
783546 Warning
783825 Paused
Overall request set Status is Error
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
So is the overall status 'warning' due to the error where a couple of patches couldn't be uploaded but otherwise looks good.
My next step would be to submit a 'Recommended Patches' job or the 'Recommended and New Code Levels"?

Hi,
So is the overall status 'warning' due to the error where a couple of patches couldn't be uploaded but otherwise looks good.You will need to download those patches and apply it manually -- Please see (OAM PADOWNLOAD AND PAANALYSIS CANNOT DIFFERENTIATE BETWEEN 11.0 AND 11i PATCHES [ID 352212.1]) for details.
My next step would be to submit a 'Recommended Patches' job or the 'Recommended and New Code Levels"?Please see (Patch Wizard Utility [ID 976188.1]).
Thanks,
Hussein

Similar Messages

Patch Wizard question

In our Dev instance (per our DBA, cloned from PROD) we were able to follow the following navigation to create a custom patch filter:
Sys Admin --> Dashboard --> Patch Wizard --> Define Patch Filters --> Recommended Patches and new code levels
--> selected the "CREATE LIKE" button. In the list of product families, we chose "E- Business Suite" to create the custom filter.
In our test instance (again cloned from the same prod), we do not see the "E- Business Suite" in the list of product familes.
Does any one have an idea why it won't show up?
Thanks,
Chiru

Apologize..
11.5.10.2, Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi,AIX
Yes we are working with the patch wizard utility.
Thanks,
Chiru
Edited by: Megastar_Chiru on Jun 17, 2010 10:33 AM
Edited by: Megastar_Chiru on Jun 17, 2010 10:34 AM
Edited by: Megastar_Chiru on Jun 17, 2010 10:34 AM

11i Patching - Patch Wizard and Quarterly CPU's

I have been tasked with applying Oracle's quarterly CPU's to our 11.5.10 CU2 environment.
I have some experience applying patches via adpatch etc. but have never tried to apply a CPU before.
My experience so far has been a lot of reading, checking pre-reqs which lead to more pre-reqs, checking to see if they've been applied or not...
Seems to be a lot of manual checking and prone to error if something is missed.
I have done a little bit of work to try and start using Patch Wizard (so far applying patch to install 'Support' filter so I can at least verify I meet Extended Support requirements).
At any rate the real question here is can I use Patch Wizard to help me apply the oracle CPU's by verifying my config and providing me a list of patches that need to be applied?
Or can I not really do that but rather just get an up to date list based on when I submit my update request? Still trying to learn what all Patch Wizard can do for me.

Hi,
At any rate the real question here is can I use Patch Wizard to help me apply the oracle CPU's by verifying my config and providing me a list of patches that need to be applied?Or can I not really do that but rather just get an up to date list based on when I submit my update request? Still trying to learn what all Patch Wizard can do for me.I hope patch wizard will not check any RDBMS patches. It will be useful for all ad patches.
Regards,
X A H E E R

Error - While Updating Metalink Credentials for Patch Wizard in R12

Error coming while doing : Update Metalink Credentials for Patch Wizard
"Unable to connect to Metalink. Please enter a valid Metalink userid and password. Please also check if the Web Proxy Setup information is correct."
We are not using Proxy Server. When i try to login to Support.oracle.com using same user it works. But throwing error using Patch Wizard. Can anyone tell me that why this error is coming ??
Regards,
Priyanka Pawar

Regarding Backup as it is Application Level patch, is it fine if i take Backup of $ORACLE_HOME for Application Tier ?You will have to take a full backup (which means all the application/database tier files -- i.e. all the directories after you shutdown all the services cleanly).
1. After that I need to 'Enable Maintenance Mode' using adadmin utility
applmgr>$adadmin
2. Source Env file for Application Tier
applmgr>$ . SID_hostname.endYou mean env file.
3. Stop all Application Services
applmgr>$ . adstpall.sh
4. Copy patch to Directory
5. Unzip
6. applmgr>$ cd /u01/patch/10629956
7. After that apply patch using adpatch utility
applmgr>$ adpatch
8. Disable Maintenance Mode
9. Start Application Tier Services
10. Retest Correct.
Can I follow these steps ? Yes.
By default value of parameter "apply" is "y" so does it apply patch intest mode? I nned to specify it to "n" or should i test it first as i m doing this first time. You do not need to test it if you take a backup, and this is a small patch so you should be OK :)
If in case anything goes wrong can I restore my Application Services back using old Oracle_Home backup ?Yes.
Note: Please edit the post before the previous one as it contains the contents of MOS document and this violates Oracle support agreement policy.
Thanks,
Hussein

Patch Wizard - Details Result is empty

Just setup Patch Wizard in a Test R12.1.3 environment.
Everything seemed to go as planned.
Just chose the default 'Recommended Patches' filter
- all the Requests completed Normally
- Recommended Patches Results Page shows Unapplied=248; Total (Applied and Unapplied=346)
But when I click on the Details Icon at the far right hand side of the page it doesn't list anything?
Before I ran Patch Wizard I applied 17270136 (but I applied it hot so now I am thinking perhaps I need to bounce it?).

Yes, please bounce the application services and check then.
Please also see (Using Patch Wizard, Getting Impact Analysis Reports for some Patches and Trying to Understand Why This Is Not Being Produced for Other Patches? (Doc ID 1586700.1)).
Thanks,
Hussein

Patch Wizard report in ebs 12.1.3

Hi All,
I am using ebs 12.1.3 in oul5x64 . Using patch wizard to run analysis on a patch and i could go in OAM
to check for Patch Impact Analysis for Patch ...Everything works as it supposes to.
Questions:
I can view the "Patch Impact Analysis for Patch" in OAM but how can i print it out. I could not
find the print out feature anywhere or how can i use sqlplus to print out the result.
Appreciate if someone can advise or provide Oracle notes for this issue.
Thanks in advance.
Regards.

This feature is not available yet and we already have (ER 9703082 -- PROVIDE REPORT OR EXPORT BUTTON FOR PATCH WIZARD OUTPUT SUMMARY+IMPACT ANALYSIS) logged for the same.
Thanks,
Hussein

Issues with patch wizard utility

We downloaded the infobundle manually due to issues with metalink credentials, When we go to run a patch recommendaiton report (with the second filter in the list) it is still giving the error in the log:
"WARNING: The MetaLink Credentials have not been set up.
Please use the MetaLink Credentials page to enter the login credentials you use to connect to the Oracle MetaLink.
The MetaLink Credentials page can be accessed from Setup (Icon on the top right) > MetaLink Credentials link."
Why would it fail if you have already downladed the bundle manually.
Also it shows further down the error log:
"Error : Not able to download the infobundle
Not able to find infobundle in staging area
Infobundle not already uploaded
Hence Failing"
Edited by: user599292 on May 7, 2013 2:37 AM

;) ApPsMasTi ;) wrote:
user599292 wrote:
All that link essentially says is download the infobundle file - then run the report. yes we've done both and it still doesnt work.
How can you tell if its in a directory that "patch wizard" can access? who is the owner of the staging directory
please post the the path of staging directory and the owner directory and infobundle.zip
"Zip file needs to be copied to a system which can access the Patch Wizard staging directory. If the staging directory is on local disk, it must be copied to the system where you run Patch Wizard. If the staging directory is on shared (network) disk, it can be copied to any system with access to the shared disk"
"Make sure the Patch Wizard can read from and write to the staging directory. " - how can you test this?create a file by application user on the stage directory
;) APpPSMAsTi ;)
Sharing is Caringthe server side of the application isnt really a strong point of mine, the staging directory is set up to be backup/patches/apps
I am not to sure what you mean by "owner", or the application user.
here is the error log if of any use:
"Start of the concurrent Program .. [################]
.........PARAMETERS ..................
Parameter name :CRITERIAID::Parameter value : Recommended Patches
Parameter name :ImportPatchInfo::Parameter value : Y
Parameter name :useproducts::Parameter value : Y
Validating Staging directory '/backup/patches/apps'
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Calling InfoBundle Upload Program for Patchlist.... [##############]
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Starting Upload Process...
Program Execution Start time: [#################]
Stage Dir is /backup/patches/apps
Infobundle Path /backup/patches/apps/InfoBundleR12.zip
Downloading InfoBundle starts: [##############]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE: MetaLink Connection setup not found. Please manually download Infobundle zip file to staging directory.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WARNING: The MetaLink Credentials have not been set up.
Please use the MetaLink Credentials page to enter the login credentials you use to connect to the Oracle MetaLink.
The MetaLink Credentials page can be accessed from Setup (Icon on the top right) > MetaLink Credentials link.
Downloading InfoBundle ends: [##########]
Checking for Infobundle in Staging Directory ...
Warning: InfoBundle doesn't exists in /backup/patches/apps
Trying to Recommend using previously uploaded Infobundle ...
**Warning: Request Completion**
Warning: Request Completion
**Warning: Request Completion**
Program Execution End time: [###############]
End of InfoBundle Upload Program ...... [##################]
Error : Not able to download the infobundle
Not able to find infobundle in staging area
Infobundle not already uploaded
Hence Failing
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
36
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is ####
+---------------------------------------------------------------------------+"
Edited by: user599292 on May 7, 2013 4:33 AM
Edited by: user599292 on May 7, 2013 4:35 AM

Patch wizards

In patch wizard do you have to download patches before it produces a patch recommendations? Or how does it check whats missing?
Could someone send me a "sample report" of the patch recommendations as I dont have access to EBS.
Edited by: user599292 on Mar 25, 2013 7:58 AM

Hussein Sawwan wrote:
user599292 wrote:
In patch wizard do you have to download patches before it produces a patch recommendations? Or how does it check whats missing?
Could someone send me a "sample report" of the patch recommendations as I dont have access to EBS.
Edited by: user599292 on Mar 25, 2013 7:58 AMPlease also see these docs, it should answer your questions.
Diagnostics Toolbox: Recommended Patch List and Patch Wizard [ID 1196135.1]
What Is the E-Business Suite Recommended Patch List (RPL) Tool? [ID 789483.1]
Patch Wizard FAQ [ID 976688.1]
Patch Wizard : Overview and Videos [ID 1077813.1]
Patch Wizard Utility [ID 976188.1]
Thanks,
HusseinI appreciate you taking the time to reply but can you answer the question - does the patch wizard have to download an up to date list of available patches before it can see what your missing?

R12.1.3 - Patch Wizard no longer working after CPU upgrade

R12.1.3 on RH Linux x86_64.
Just upgraded my R12.1.3 environment to get to the Jan 2013 CPU level and decided to setup Patch Wizard to see what it shows now.
Previously I had to apply patch "10629956 - Oracle Applications Patch Wizard" to get patch wizard to work with our proxy server.
Initially I just went ahead and applied that patch again to my new config but still couldn't get past this error:
Validation Error. Please check the indicated fields below.
Unable to connect to Metalink. Please enter a valid Metalink userid and password.
Please also check if the Web Proxy Setup information is correct.
Now upon further investigation I see there is an updated patch:
Patch 16357991 for the latest version of Patch Wizard in Oracle E-Business Suite (Release 12.1)
This Patch has been Superseded. Reason 16357991 included in 11071638
I applied patch 11071638 but I still get the same validation error.
Pre-req patches R12.AD.B.delta.3 [9239089] and R12.ATG_PF.B.delta.3 [8919491] had been applied.
I still have an older instance running and patch wizard works properly with the same credentials and proxy server settings there.
So how do I troubleshoot this?

Did you bounce the application services and see if this helps?
Please also review (New Required Patches for Patch Wizard, Patch Manager, and Oracle Application Change Management Pack for Oracle E-Business Suite Releases 11i, 12.0, and 12.1 [ID 1267768.1]) and make sure you have all the patches applied.
Thanks,
Hussein

Patch Wizard not Merging Patches

I an trying to use the Patch Wizard in 11.5.10 on Windows. I am able to download patches but the "Merge" does not seem to be working for me. I have the "Merge Options" I have:
"Automatically merge downloaded patches" = checked
"Merged Patch Name" = merged_2010050581719
"Merging Strategy" = Two merged patches: US; non-US
All requests complete successfully and it downloads the patches to the location I set "D:\Oracle\OAMPatchWizard". However it does not unzip them or merge them.
Any idea on this?

I have tried a few different patch groups just for tersting:
1. 5120432, 4255826, 4179434
2. 5120432, 4255826, 4179434, 6853134, 6804367, 5200052, 4016675, 3591687, 5140723, 8768103, 8567963, 8549599, 8542643, 8531750, 8488400, 8399189, 8364720, 6998848, 5912291, 5244165, 4429228, 9351039, 7597151, 7555553, 7534124
3. 4483674, 6241631, 7293818, 4016830, 6617445, 5565583, 6617861, 1422989, 3653484, 9062727, 4001448, 4428056, 3999182, 4017594, 3904312, 3897247, 4594570, 3618333, 4551977, 5591144
None of these worked.
I have reviewed the documents and have not seen anything that helped.

Export Patch wizard report to excel

Hi,
Is there a way to export the recommended patches list generated from the patch wizard to excel? I have tried the export to excel option but it failing.
Thanks,
Keith

OK here you go. You need the request id from submit recommend patches - so from recommended patches results page click on the request set id link and then get the Submit Analyze Patches (Wrapper) request id in.
Recommended...
select
adp.bug_number patch_name,
adp.product_family_abbreviation ,
ad_pa_validate_criteriaset.get_cs_prod_fam_abbr(adp.product_abbreviation) product_family_abbreviation,
nvl(adp.product_abbreviation, ' ') ,
adp.bug_description ,
DECODE(adp.IS_FAMILY_PACK,'Y','Family Pack')||
DECODE(adp.IS_MAINT_PACK,'Y','Maintenance Pack')||
DECODE(adp.IS_MINI_PACK,'Y','Mini Pack')||
DECODE(adp.IS_HIGH_PRIORITY,'Y','High Priority Patch',NVL(adp.patch_type,'User Request')) Patch_Type ,
(SELECT COUNT(*) FROM ad_pa_anal_run_bug_prereqs aparbp
WHERE adb.analysis_run_bug_id = aparbp.analysis_run_bug_id ) prereq_cnt,
DECODE (adh.bug_number, NULL, 'N', 'Y'),
adt.name ,
adb.analysis_run_id ,
analysis_run_bug_id ,
ads.snapshot_id ,
ad_pa_validate_criteriaset.get_cs_prod_fam_name(adp.product_abbreviation) product_family_name ,
appi.product_name ,
(SELECT COUNT(*) FROM ad_pa_anal_run_bug_codelevels aparbc
WHERE adb.analysis_run_bug_id = aparbc.analysis_run_bug_id ) level_cnt ,
decode (adb.analysis_status,'MISSING','Missing','READY','Unapplied','APPLIED','Applied',adb.analysis_status) patch_status ,
nvl(decode(adp.has_msi_steps,'Y','Yes','N','No',adp.has_msi_steps), ' ') hasMsiSteps ,
adp.baseline ,
adp.entity_abbr ,
adp.patch_id
from
ad_pm_patches adp ,
ad_appl_tops adt ,
ad_pa_analysis_run_bugs adb ,
ad_pm_product_info appi ,
ad_snapshots ads
,ad_hidden_patches adh
where
adb.analysis_run_id = 402352 --<requestid>
and adb.analysis_status in ('MISSING','READY','APPLIED')
and ads.SNAPSHOT_TYPE = 'G'
and adt.NAME ='GLOBAL'
and adb.RECOMMENDED_PATCH_TYPE in ('1','3')
and adb.appl_top_id = adt.APPL_TOP_ID
and ads.appl_top_id = adt.APPL_TOP_ID
and appi.product_abbreviation = adp.product_abbreviation
and adb.bug_number = adp.BUG_NUMBER
and adb.baseline = adp.baseline
and adp.patch_metadata_key = 'DEFAULT'
and (adp.is_high_priority = 'Y' OR adp.is_code_level='N' )
and adh.bug_number(+) = adp.BUG_NUMBER
order by patch_name
New Code ...
select
adp.bug_number patch_name,
adp.product_family_abbreviation ,
ad_pa_validate_criteriaset.get_cs_prod_fam_abbr(adp.product_abbreviation) product_family_abbreviation,
nvl(adp.product_abbreviation, ' ') ,
adp.bug_description ,
INITCAP(NVL(adp.patch_type,'User Request')) Patch_Type ,
(SELECT COUNT(*) FROM ad_pa_anal_run_bug_prereqs aparbp
WHERE adb.analysis_run_bug_id = aparbp.analysis_run_bug_id ) prereq_cnt,
DECODE (adh.bug_number, NULL, 'N', 'Y'),
adt.name ,
adb.analysis_run_id ,
analysis_run_bug_id ,
ads.snapshot_id ,
ad_pa_validate_criteriaset.get_cs_prod_fam_name(adp.product_abbreviation) product_family_name ,
appi.product_name ,
(SELECT COUNT(*) FROM ad_pa_anal_run_bug_codelevels aparbc
WHERE adb.analysis_run_bug_id = aparbc.analysis_run_bug_id ) level_cnt ,
decode (adb.analysis_status,'MISSING','Missing','READY','Unapplied','APPLIED','Applied',adb.analysis_status) patch_status ,
nvl(decode(adp.has_msi_steps,'Y','Yes','N','No',adp.has_msi_steps), ' ') hasMsiSteps ,
adp.baseline ,
adp.entity_abbr ,
adp.patch_id
from
ad_pm_patches adp ,
ad_appl_tops adt ,
ad_pa_analysis_run_bugs adb ,
ad_pm_product_info appi ,
ad_snapshots ads
,ad_hidden_patches adh
where
adb.analysis_run_id = 402352 --<request_id>
and adb.analysis_status in ('MISSING','READY','APPLIED')
and ads.SNAPSHOT_TYPE = 'G'
and adt.NAME ='GLOBAL'
and adb.appl_top_id = adt.APPL_TOP_ID
and ads.appl_top_id = adt.APPL_TOP_ID
and appi.product_abbreviation = adp.product_abbreviation
and adb.bug_number = adp.BUG_NUMBER
and adb.baseline = adp.baseline
and adp.patch_metadata_key = 'DEFAULT'
and adp.is_code_level = 'Y'
and adh.bug_number(+) = adp.BUG_NUMBER
order by patch_name

Install Kernel Patch and Support Package

Hi Gurus.
How can I update the kernel patch and support package in solution manager?
What patchs i have to download In the service.sap.com ?
best Regards
luis

Hi Luis,
Yopu must already have checked this info at Inst Guides..
else...The Post installation steps in the installation guide contain the procedure for application of latest support packs procedure.
https://websmp204.sap-ag.de/instguides
The following SAP notes can also be referred : 212876
Information of how to download a kernel can be obtained from 19466.
Details of Patches and their release schedules can be obtained as always at
https://websmp104.sap-ag.de/ocs-schedules
Hopefully it Helps in your quest.
Br,
Sri

Patch wizard output

I have asked our admin to run some reports in patch wizard and they've sent me a set of xml files. When I open them its just nonsense. How does patch wizard export? Cant you export to PDF or similar? Or what do I need to be able to view the xml files in some sort of human readable format.

user599292 wrote:
Our admins are trying to produce a report of missing patches from patch wizard, they downloaded the infobundle manually, the process "runs" but there is apparently no output. Can you think what they are doing wrong? The report is very important but I dont have admin responsibilities in the application hence am asking for the report from the admins. I'd prefer some pointers what they could be doing wrong in that the request runs but theres no output, as opposed to just pointing me in the direction of the generic patch wizard docs.Please see the following docs.
Diagnostics Toolbox: Recommended Patch List and Patch Wizard [ID 1196135.1]
What Is the E-Business Suite Recommended Patch List (RPL) Tool? [ID 789483.1]
Patch Wizard FAQ [ID 976688.1]
Patch Wizard : Overview and Videos [ID 1077813.1]
Patch Wizard Utility [ID 976188.1]
Thanks,
Hussein

Patch Wizard

Hello everyone,
I need the Oracle documents on Configuring, Maintaining and Using the "Patch Wizard" utility in Oracle EBS 11i/R12.
Regards,

Srini Chavali wrote:
For R12, see http://download.oracle.com/docs/cd/E18727_01/doc.121/e12148/T531058T531063.htm
Also see these MOS Docs
Patch Wizard Utility          [Document 976188.1]
Patch Wizard FAQ          [Document 976688.1]
Patch Wizard : Overview     [Document 1077813.1]
All those docs/links are already referenced above.
Thanks,
Hussein

Patch Wizard doesnot work in R12

Hi:
I am trying to analyze a patch before applying it in 12.1.3, 11g on Linux. OAM-> Patch Wizard-> entered Staging Directory=/applprod/patches/-> Ok-> Confirmation->Ok, Then it went back to Patch Wizard page. Please help me to debug. Thanks!!!

+---------------------------------------------------------------------------+
Applications DBA: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
PAANALYZEPATCHES module: Submit Analyze Patches (Wrapper)
+---------------------------------------------------------------------------+
Current system time is 10-JUN-2013 15:12:57
+---------------------------------------------------------------------------+
Start of the concurrent Program .. [Jun 10, 2013 3:12:59 PM]
.........PARAMETERS ..................
Parameter name :PATCHLIST::Parameter value : 14353622
Validating Staging directory '/Stage/Patches'
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Calling Patch Download Program for Patchlist.... [Jun 10, 2013 3:12:59 PM]
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Patchlist: 14353622 Platform: 226 Languages:
Validating Staging directory '/Stage/Patches'
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Warning: Your MetaLink Credentials are not set. Download of patches skipped.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
End of Patch Download Program for patch list.... [Jun 10, 2013 3:12:59 PM]
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Calling Patch Upload Program for Patchlist.... [Jun 10, 2013 3:12:59 PM]
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Starting Upload Process...
Parameter List 14353622
Program Execution Start time: [Jun 10, 2013 3:12:59 PM]
Stage Dir is /Stage/Patches
Entity hastable created. Total entries : 239
Starting processing patch 14353622 at [Jun 10, 2013 3:12:59 PM]
ERROR: No patch zip file was present under stage directory
Program Execution End time: [Jun 10, 2013 3:12:59 PM]
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
RUN SUMMARY
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
. Patch Download
Outcome: Success with warnings
Warning:
MetaLink Credentials are not set. Download of patches skipped.
. Patch Upload
Option Selected :Yes
Outcome: Failure
Error: ERROR: No patch zip file was present under stage directory
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
36
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 10-JUN-2013 15:13:00
+---------------------------------------------------------------------------+
*From Linux:* I have the zip file and unzipped file:
$cd /Stage/Patches
$ls *14374740*
-rw-r--r-- 1 applpth dba 5461688 Oct 16 2012 p14374740_R12.CE.B_R12 _GENERIC.zip
drwxr-xr-x 7 appltest dba 4096 Nov 15 2012 14374740

Patch Wizard - Support Filter question

Similar Messages

Maybe you are looking for