Patch6: paradox-ORA 12222 TNS : no such protocol adopter
getting a ORA 12222 TNS : no such protocol adopter found
after installing patch 6 over existing oracle 9i AS 1.0.2.0.0
and forms 6i and reports 6i server,when we are running the test form with all the settings required for running forms as servlets tesst forms is coming successfully.But when with the same parameter we are running our form which makes databse connection gives the above ORA error 12222.
to ensure that it is not a protocol adapter problem we remove one line
;serverURL= ---- this line is commented-----
serverURL=/servlet/oracle.forms.servlet.ListenerServlet
and put instead
serverURL=
;serverURL=/servlet/oracle.forms.servlet.ListenerServlet ---this line is commented ----
After replacing again we tried to run the test.fmx as well as our form.Both were running successfully.
Since this one line change made Listener Servlet inactive and forms listerner as active component.
looking at the above situation we came to conclusion that it should not be a TNS protocol adaptor probel. so there must be either some problem with the configuration or some probelem with the patch 6 itself.
(we would like to mention that earlier we did same thing with patch 5 and getting error FRM-92100.This error was resolved when we used patch 6 with one additional line
in formsweb.cfg
as "networkRetries=30" )
we are using windows 2000
null
A few more facts..
while installing we had done a custom install for patch 6 .Druing this a error came up as
a wrtie error while trying to copy NLSRTL33.DLL while installing server patch component during custom install.
does anyone out there know .. what this DLL is for.
Regards
Sunil choudhary
Similar Messages
-
"ORA-12222 TNS no such protocol adapter" When running Forms after installing Portal
We have a Forms 6i (web) application running on 9iAS. This worked fine. But after installing Portal on the same 9iAS, we got the following error when starting the WebForms application:
ORA-12222 TNS no such protocol adapter
Who knows a solution?
Configuration
9IAS v1.0.2.2
8.1.7
Form 6i Patch 10
Windows NT
Best regards,
Harm van ZoestThis is s SQLNET error.
You can search for it on OTN using the search button.
IT usually means that the tnsnames.ora file was changed. Or that you are now using another tnsnames.ora. -
ORA-12222 : TNS:No such protocol adapter -error
Hi
when i try to connect database from forms builder i get the below error.
ORA-12222 : TNS : No such protocol adapter. I refered many forums and help sites... i checked everyting in my system. like Regedit and environment variable.
still i am getting the same error. kindly help to resolve this issue.
Please find the below details of my desktop, form builder and Oracle database.
Desktop OS
Operating system : WINDOWS XP (professional) version 2002 service pack 3
Oracle Database
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Oracle database installed in Linux server
linux server details
Linux VM177 2.6.18-194.0.0.0.3.el5xen #1 SMP Mon Mar 29 18:27:00 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
any rpm are required in Linux server resolve this issue.
my linux server i couldn't find any rpms OPENM*
$ rpm -qa openm*
$
Oracle forms builder
Forms [32 Bit] Version 6.0.8.24.1 (Production)
Oracle Toolkit Version 6.0.8.24.0 (Production)
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #1459 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 6.0.7.1.0 - Production
Oracle Virtual Graphics System Version 6.0.5.38.0 (Production)
Oracle Tools GUI Utilities Version 6.0.8.20.1 (Production)
Oracle Multimedia Version 6.0.8.20.0 (Production)
Oracle Tools Integration Version 6.0.8.18.0 (Production)
Oracle Tools Common Area Version 6.0.8.18.0
Oracle CORE Version 4.0.6.0.0 - Production
Thanks in advance. your early reply will be very much appriciated.
GowthamPlease find below the output.
$ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 03-APR-2012 06:08:23
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=VM.xxx.com )(PORT=1525)))
The listener supports no services
The command completed successfully
$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 03-APR-2012 06:13:18
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=VM.xxx.com )(PORT=1525)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-APR-2012 02:51:12
Uptime 1 days 3 hr. 22 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle11g/o11gr22/app/o11gr22/product/11.1.0/db_1/network/admin/listener.ora
Listener Log File /oracle11g/o11gr22/diag/tnslsnr/VM/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=VM.xxx.com )(PORT=1525)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1525)))
The listener supports no services
The command completed successfully
$ cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
10.123.256.177 VM.xxx.com VM VM.in.oracle.com
Gowtham -
ORA-12222: TNS:no such protocol adapter
This is not a repository problem, but it happened when I tried to install the repos.
I get this message whenever I try to connect to the database using sqlplus from the orecle_home where I installed the repository or the repos. admin-utility.
I have tried both to use TNS_ADMIN and not, but the error is the same in both cases.
When I use Net8 assistant to make a tns and test the connection it works fine.
I can connect to the database with sqlplus from my 817-oracle_home.
I just tried to install the protocol-adapters manually, but it doesn't help.
Does anybody know what to do?
Arne.Dear OTN,
I've got the same problem!
After I upgraded Designer 6i Rel2 to 6i Rel3
SQL Plus 8.0 returns ORA-12222 Error, "The protocol adapter requested (by way of the "(PROTOCOL=..)"
keyword-value pair in a TNS address) is unknown. If the supplied address
is typographically correct then the protocol adaptor is not installed.
Action: Install the protocol adapter or correct typographically error,
as appropriate. Note: if the supplied address was derived from
resolving the service name, check the address in the appropriate file
(TNSNAMES.ORA, LISTENER.ORA or TNSNET.ORA)."
I'm not novice and checked quite a few times all required files and also tried NET EASY CONFIG and so on. It doesn't work.
Please, help me with the settings! It should be beneficial to all!
null -
TNS: no such protocol error
Hi,
In order to solve the JVM problem because of the max length directory name problem (which i read about in the forum
Re: How to lock entire schema?
i installed the oracle designer 6i into c:\odes6i folder as indicated in the above forum answer,
but now, when i want to connect i am getting the error message :
ORA-12222: TNS:no such protocol adapter
RME-00220: Failed to connect to Repository
Does somebody know the solution for this? (i also install the needed drivers)
Thanks in advance,
C|neyt UsluPlease find below the output.
$ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 03-APR-2012 06:08:23
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=VM.xxx.com )(PORT=1525)))
The listener supports no services
The command completed successfully
$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 03-APR-2012 06:13:18
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=VM.xxx.com )(PORT=1525)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-APR-2012 02:51:12
Uptime 1 days 3 hr. 22 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle11g/o11gr22/app/o11gr22/product/11.1.0/db_1/network/admin/listener.ora
Listener Log File /oracle11g/o11gr22/diag/tnslsnr/VM/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=VM.xxx.com )(PORT=1525)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1525)))
The listener supports no services
The command completed successfully
$ cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
10.123.256.177 VM.xxx.com VM VM.in.oracle.com
Gowtham -
Designer6i - can't connect database TNS:no such protocol adapter
Cannot connect to database with Repository Administration Utility.
I have installed Oracle8i Enterprise Edition Release 2 on my WindowsNT in one oracle_home (ora8i) and Designer 6i in the same machine in another oracle_home (orades which is DEFAULT_HOME).
Installation is successful. I have set up the tnsnames.ora file in the directory d:\orades\net80\admin. I have also set the registry variables \HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\TNS_ADMIN
and
\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\Home1\TNS_ADMIN
to d:\orades\net80\admin as per Installation Guide.
From ora8i->DatabaseAdministration->DBA Studio I can connect to the database using the service string in the above tnsnames.ora file.
But it fails from OracleRepository6i-> RepositoryAdministrationUtility with an error of ORA-12222: TNS:no such protocol.
The TCP network protocol is installed for Designer6i as the folder "tnsapi" exists in orades\net80.
Can anyone please point out what is wrong and help? thanksHi PAUL,
I think you first install designer and then Oracle.
Kavita
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Paul Kwok ([email protected]):
Cannot connect to database with Repository Administration Utility.
I have installed Oracle8i Enterprise Edition Release 2 on my WindowsNT in one oracle_home (ora8i) and Designer 6i in the same machine in another oracle_home (orades which is DEFAULT_HOME).
Installation is successful. I have set up the tnsnames.ora file in the directory d:\orades\net80\admin. I have also set the registry variables \HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\TNS_ADMIN
and
\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\Home1\TNS_ADMIN
to d:\orades\net80\admin as per Installation Guide.
From ora8i->DatabaseAdministration->DBA Studio I can connect to the database using the service string in the above tnsnames.ora file.
But it fails from OracleRepository6i-> RepositoryAdministrationUtility with an error of ORA-12222: TNS:no such protocol.
The TCP network protocol is installed for Designer6i as the folder "tnsapi" exists in orades\net80.
Can anyone please point out what is wrong and help? thanks
<HR></BLOCKQUOTE>
null -
TNS-12538: TNS:no such protocol adapter, and install MS loopback adapter
Hello,
I am trying to install oracleAS Infrastructure and portal on my windows xp pc. (Oracle Application Server 10g Release 2 (10.1.2)
At some point of the installation for Internet Directory Configuration Assistant, there is an error:
===========================================================
Output generated from configuration assistant "Internet Directory Configuration Assistant" (attempt 2):
Myinfra.mypcname.domainname
java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionat oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
===========================================================
After did some searching, I find I may need to install MS loopback adapter.
So I followed http://support.microsoft.com/kb/839013 to install the MS Loopback adapter.
After I installed, When I open the Network Connetcions, I found there are two local area connetcions. One of then called local area connection 2, and it's MS loopback adapter. I got a warning for local area connection 2, it says that my pc does not have a IP address assigned, and its status is : limited or no connectivity .
I tried to repair to establish the full connection by clicking on the repair button, but the process is failed.
I also tried to run command: tnsping orcl ( orcl is my database service name ), after installed the loopback adapter.
tnsping orcl, still got this error:
======================================================
C:\>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 9.0.1.4.1 - Production on 16-MAR-20
06 22:41:35
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
E:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =mypcname.mydomainname)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
TNS-12538: TNS:no such protocol adapter
===================================================
btw. my pc IP was assigned by DHCP, and pc host name is something like: abcd.abc.edu
Q1. I am wondering which local area connection is currently used by default ? If it's the old one, how to configure it to use the new added one? ( local area connetcion 2 ).
Q2. Do I have to install MS Loopback adapter for installing Oracle Application Server 10g Release 2 (10.1.2)?
I don't have a fixed IP, however my IP is seldom changed. And I'm ok with 127.0.0.1
Any suggestion ?
Thanks for your reply,
EmilyHello,
I am trying to install oracleAS Infrastructure and portal on my windows xp pc. (Oracle Application Server 10g Release 2 (10.1.2)
At some point of the installation for Internet Directory Configuration Assistant, there is an error:
===========================================================
Output generated from configuration assistant "Internet Directory Configuration Assistant" (attempt 2):
Myinfra.mypcname.domainname
java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionat oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
===========================================================
After did some searching, I find I may need to install MS loopback adapter.
So I followed http://support.microsoft.com/kb/839013 to install the MS Loopback adapter.
After I installed, When I open the Network Connetcions, I found there are two local area connetcions. One of then called local area connection 2, and it's MS loopback adapter. I got a warning for local area connection 2, it says that my pc does not have a IP address assigned, and its status is : limited or no connectivity .
I tried to repair to establish the full connection by clicking on the repair button, but the process is failed.
I also tried to run command: tnsping orcl ( orcl is my database service name ), after installed the loopback adapter.
tnsping orcl, still got this error:
======================================================
C:\>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 9.0.1.4.1 - Production on 16-MAR-20
06 22:41:35
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
E:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =mypcname.mydomainname)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
TNS-12538: TNS:no such protocol adapter
===================================================
btw. my pc IP was assigned by DHCP, and pc host name is something like: abcd.abc.edu
Q1. I am wondering which local area connection is currently used by default ? If it's the old one, how to configure it to use the new added one? ( local area connetcion 2 ).
Q2. Do I have to install MS Loopback adapter for installing Oracle Application Server 10g Release 2 (10.1.2)?
I don't have a fixed IP, however my IP is seldom changed. And I'm ok with 127.0.0.1
Any suggestion ?
Thanks for your reply,
Emily -
TNS:no such protocol adapter
Hai,
When i tried to start lsnrctl>start
i got the following error messages please if some one could resolve my problem it is very urgent
LSNRCTL> start
Starting /usr2/oracle/u01/app/oracle/product/8.1.6/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 8.1.6.0.0 - Production
System parameter file is /usr2/oracle/u01/app/oracle/product/8.1.6/network/admin/listener.ora
Log messages written to /usr2/oracle/u01/app/oracle/product/8.1.6/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Attempted to listen on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dbserver)(PORT=1521)))
TNS-12538: TNS:no such protocol adapter
TNS-12560: TNS:protocol adapter error
TNS-00508: No such protocol adapter
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Anand Sengodan ([email protected]):
Hai,
When i tried to start lsnrctl>start
i got the following error messages please if some one could resolve my problem it is very urgent
LSNRCTL> start
Starting /usr2/oracle/u01/app/oracle/product/8.1.6/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 8.1.6.0.0 - Production
System parameter file is /usr2/oracle/u01/app/oracle/product/8.1.6/network/admin/listener.ora
Log messages written to /usr2/oracle/u01/app/oracle/product/8.1.6/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Attempted to listen on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dbserver)(PORT=1521)))
TNS-12538: TNS:no such protocol adapter
TNS-12560: TNS:protocol adapter error
TNS-00508: No such protocol adapter
<HR></BLOCKQUOTE>
Would probably have to see your listener.ora to know for sure but two things I would look for: AFAIK you can use either tcp or udp for the PROTOCOL= statement in the listener.ora, the Oracle Listener listens on port 1521 so you should add port 1521 to your SERVICES file in the /etc directory. See if either of those help any..
dmm
null -
TNS-12538: TNS:no such protocol adapter
hi, i'm a newbie for oracle... now I face some problem while i try to create database.
After i installed Oracle 10g on Solaris 10x86-64, I created listener.ora by using netca.
but I cannot start it. error shown as
$ lsnrctl start
TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
System parameter file is /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/admin/listener.ora
Log messages written to /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/log/listener.log
TNS-01150: The address of the specified listener name is incorrect
TNS-01153: Failed to process string: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.104.131.92)(PORT=1524)))
Listener failed to start. See the error message(s) above...
$ lsnrctl status
LSNRCTL for Solaris: Version 10.2.0.3.0 - Production on 12-SEP-2008 10:05:30
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.104.131.92)(PORT=1524)))
TNS-12538: TNS:no such protocol adapter
TNS-12560: TNS:protocol adapter error
TNS-00508: No such protocol adapter
how can I fix this problem? also I cannot sqlplus / as sysdba
error shown as
$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Sep 12 10:28:56 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
ERROR:
ORA-12157: TNS:internal network communication error
please help me...thank you.Hi Rajesh Vig
Thank for your help.
I did change follow your advice. But it doesn't work at all.
However, before finishing configured listener, something warn me as popup message.
"The information provided for this listener is currently in use by other software on this computer.
You can proceed with the configuration as it is, but it will not be possible to start this listener until
the conflict is resolved."
I'm so doubt, what wrong with my listener. Why did oracle warn me that my listener was conflict with another. Although, there was no listener.ora at that time. ?????
Here is my new listener.ora created by netca.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/ZTDB3/bin/oracle10/product/10.2.0)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.104.131.92)(PORT = 1530))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
$ lsnrctl start
TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
System parameter file is /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/admin/listener.ora
Log messages written to /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/log/listener.log
TNS-01150: The address of the specified listener name is incorrect
TNS-01153: Failed to process string: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ztdb3)(PORT=1530)))
Listener failed to start. See the error message(s) above...
$ netstat -an | grep 1530
no result shown up.
If you have found something wrong, please advise me. Thank you. -
Hello,
I am trying to install oracleAS Infrastructure and portal on my windows xp pc,
At some point of the installation for Internet Directory Configuration Assistant, there is an error:
===========================================================
Output generated from configuration assistant "Internet Directory Configuration Assistant" (attempt 2):
Myinfra.mypcname.domainname
java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionat oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
===========================================================
After did some searching, I find I may need to install MS loopback adapter.
So I followed http://support.microsoft.com/kb/839013 to install the MS Loopback adapter.
After I installed, When I open the Network Connetcions, I found there are two local area connetcions. One of then called local area connection 2, and it's MS loopback adapter. I got a warning for local area connection 2, it says that my pc does not have a IP address assigned, and its status is : limited or no connectivity .
I tried to repair to establish the full connection by clicking on the repair button, but the process is failed.
I also tried to run command: tnsping orcl ( orcl is my database service name )
tnsping orcl, still got this error:
======================================================
C:\>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 9.0.1.4.1 - Production on 16-MAR-20
06 22:41:35
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
E:\oracle\product\10.1.0\Db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =mypcname.mydomainname)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = o
rcl)))
TNS-12538: TNS:no such protocol adapter
===================================================
btw. my pc IP was assigned by DHCP, and pc host name is something like: abcd.abc.edu
Q1. I am wondering which local area connection is currently used by default ? If it's the old one, how to configure it to use the new added one? ( local area connetcion 2 )
Q2. Do I have to install MS Loopback adapter ? I don't have a fixed IP, however my IP is seldom changed. And I'm ok with 127.0.0.1
Any suggestion ?
Thanks for your reply,
EmilyHi Rajesh Vig
Thank for your help.
I did change follow your advice. But it doesn't work at all.
However, before finishing configured listener, something warn me as popup message.
"The information provided for this listener is currently in use by other software on this computer.
You can proceed with the configuration as it is, but it will not be possible to start this listener until
the conflict is resolved."
I'm so doubt, what wrong with my listener. Why did oracle warn me that my listener was conflict with another. Although, there was no listener.ora at that time. ?????
Here is my new listener.ora created by netca.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/ZTDB3/bin/oracle10/product/10.2.0)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.104.131.92)(PORT = 1530))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
$ lsnrctl start
TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
System parameter file is /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/admin/listener.ora
Log messages written to /oracle/ZTDB3/bin/oracle10/product/10.2.0/network/log/listener.log
TNS-01150: The address of the specified listener name is incorrect
TNS-01153: Failed to process string: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ztdb3)(PORT=1530)))
Listener failed to start. See the error message(s) above...
$ netstat -an | grep 1530
no result shown up.
If you have found something wrong, please advise me. Thank you. -
Database link : TNS-12538: TNS:no such protocol adapter
I have created a database link on schema1:
CREATE public DATABASE LINK db_link
CONNECT TO schema2 IDENTIFIED BY schema2
USING 'schema2' (service name);
While I am testing this link to access the object of schema 2 on schema1
i am getting error:TNS-12538: TNS:no such protocol adapter
In tnsnames.ora file of schema1,i have also included the details for schema2.
Please tell me the solution of this problem
Thanks in advanceHi,
Can you ping the schema2 which is another DB or can you connect to schema2 DB with the service which you have used for DB link.
Check that first functioning correct or not.
Check this link.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/ds_admin.htm#sthref4108
Pavan Kumar N -
TNS: no such protocol, TNS: no listener
Hi OTn,
Where can I use the port no. 9000 and Sockets as protocol, in the form server setup?
I am no able to the provision for typing the above said. What mistake, I have made!?
And when I use the Start >Net8 Easy Config, for testing the connection, I used to get repeated errors like,
TNS: no listener
TNS: no such protocol adaptor
TNS: could not resolve the servise name
What is the remedy for this?
Pls help.
Thank you,
Maha ([email protected])
nullStart the database listener on your database server: lsnrctl start.
-
ORA-12560 TNS error in protocol adapter. Why ?
I installed on computer1 an Oracle Express 10g server and he runs fine.
Then, on another computer2 in the inhouse-net I installed the Oracle Client.
When I try to contact now from computer2 the Oracle server on computer1
with e.g.
sqlplus.exe myname/mypasswd
I am getting an error ORA-12560: TNS: Error in protofol adapter.
What does that mean?When I enter the same locally on the server machine everything is fine.
Firewalls between the computers are disabled.
Which Oracle services must run on the client (not the server !) machine ?Ok, my Oracle Client is installed in C:\XEClient
Below I show you the (recursive) output of the 'tree.exe' command (under WinXP)
of the folder tree of C:\XEClient. Where is the directory "network/admin" ??????
C:\XEClient>tree
Folder PATH listing for volume WinXP
Volume serial number is xxxxxxxx
C:.
├───bin
├───doc
├───jdbc
│ └───lib
├───jlib
├───lib
├───oci
│ ├───include
│ ├───lib
│ │ └───msvc
│ │ └───vc71
│ └───samples
├───odbc
│ ├───help
│ └───html
├───odp.net
│ ├───doc
│ ├───help
│ │ └───ja
│ ├───PublisherPolicy
│ ├───Resources
│ │ ├───de
│ │ ├───es
│ │ ├───fr
│ │ ├───it
│ │ ├───ja
│ │ ├───ko
│ │ ├───pt-BR
│ │ ├───zh-CHS
│ │ └───zh-CHT
│ └───samples
│ ├───ArrayBind
│ ├───AssocArray
│ ├───DataSet
│ │ ├───DMLOperOnDS
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ ├───DSDRwithLOB
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ ├───DSPopulate
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ ├───DSPopulateVB
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ ├───DSwithRefCur
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ ├───RelationalData
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ ├───RelationalDataVB
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ └───SafeTypeMapping
│ │ ├───doc
│ │ │ └───images
│ │ ├───setup
│ │ └───src
│ ├───EventHandler
│ │ └───RowUpdateEventHandler
│ │ ├───doc
│ │ │ └───images
│ │ └───src
│ ├───Globalization
│ │ ├───doc
│ │ │ └───images
│ │ ├───setup
│ │ └───src
│ ├───LOB
│ │ ├───AccessBFile
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ └───src
│ │ └───UpdLob
│ │ ├───doc
│ │ │ └───images
│ │ ├───setup
│ │ └───src
│ ├───RefCursor
│ │ └───UpdRefCursor
│ │ ├───doc
│ │ │ └───images
│ │ └───src
│ ├───StatementCache
│ ├───TAF
│ │ ├───doc
│ │ │ └───images
│ │ ├───setup
│ │ └───src
│ ├───Transaction
│ │ ├───DistributedTransaction
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ └───Savepoint
│ │ ├───doc
│ │ │ └───images
│ │ ├───setup
│ │ └───src
│ ├───WebService
│ │ └───OdpNetWs
│ │ ├───doc
│ │ │ └───images
│ │ └───src
│ │ ├───client
│ │ └───webservice
│ └───XML
│ ├───XMLView
│ │ ├───doc
│ │ │ └───images
│ │ ├───setup
│ │ └───src
│ └───XMLViewVB
│ ├───doc
│ │ └───images
│ ├───setup
│ └───src
├───oledb
│ ├───include
│ ├───lib
│ └───samples
│ ├───DataSet
│ │ ├───DMLOperOnDS
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ ├───DSPopulate
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ ├───DSPopulateVB
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ ├───DSwithLOB
│ │ │ ├───doc
│ │ │ │ └───images
│ │ │ ├───setup
│ │ │ └───src
│ │ └───DSwithRefCur
│ │ ├───doc
│ │ │ └───images
│ │ ├───setup
│ │ └───src
│ └───RefCur
├───oramts
│ ├───admin
│ ├───public
│ └───trace
├───precomp
│ ├───admin
│ └───lib
└───sqlplus
C:\XEClient> -
*URGENT* Forms 6i on XP - "no such protocol adapter" problem
Hello,
I seem to have run into a common problem but mine has a twist.
I have a laptop with Windows XP that I have installed Oracle 8.1.7.3.0 on. That works fine.
I have a project that has me connected to Oracle O.com network. I can connect fine to that using my initial Oracle installation.
I needed to install Oracle 6i and ran into a few problems, but found recommended work arounds which included me installing it in a seperate directory as Windows 95 or windows 98. I installed it in C:/oracle/developer. I can open existing forms to work on them.
What I can't do is connect to my O.com connection using the Developer or the Sqlplus 8.0 version that is included with it.
Per this website http://metalink.oracle.com/oracleinstall/oracle8i/windows.html#MSfive
I have run through the net80 configuration process.
I have copied my working tnsnames.ora file to all possible locations that the developer version would pick up (including of course c:\oracle\developer\net80\admin).
I have changed the required sqlnet.ora file to sqlnet.old.
I rebooted.
The listener and database start on their own, so I don't have to start them from the dos prompt.
Any attempt to connect to the O.com or my local database using the Developer sqlplus or Developer itself results in the message - "ERROR: ORA-12222: TNS:no such protocol adapter".
If I try to connect to some made up database name, I get a "could not resolve service name" message. So I can tell that it least recognizes my database names defined in the tnsname.ora file.
If anyone has installed Forms 6i on XP and ran into similar problems and fixed them, or if anyone has any clue as to what I need to do to fix this, I'll be immensely grateful.
Thanks.
KurtIt occurs to me that perhaps I need to install a second version of the listener, specifically for my forms environment. Is this the case?
Thanks again.
Kurt -
REP_0501 adn ORA-12222 error
Hi ,
I am unable to connecting database using report builder.
I am getting below error:
REP-0501:Unable connect to the specified database
ora-12222:TNS no such protocal adapter
Plesae suggest me856458 wrote:
Hi ,
I am unable to connecting database using report builder.
I am getting below error:
REP-0501:Unable connect to the specified database
ora-12222:TNS no such protocal adapter
Plesae suggest meGoogle is your friend, [url http://www.lmgtfy.com/?q=ora-12222+oracle+report+builder+6i] but only if you use it.
This was the second hit on the list:
http://sojungle.wordpress.com/2012/02/15/oracle6i-formsreports-builder-cannot-connect-to-any-database-ora-12222/
Maybe you are looking for
-
How to connect a CVS server with remote Hosts(NWDS7.0)
Hi Frndz.. I installed CVSNT server in one machine n itz workiing fine with that NWDS in that machine , now i want make connect that CVS server from remote machines NWDS's to use that CVS server as a central repo' Can anyone guide me how can i connec
-
My old desktop crashed. My new desktop has the most recent version of Firefox and the new sync feature. Unfortunately, none of my bookmarks from the old desktop/Firefox transferred to the new desktop. My android phone (GS3) and android tablet both st
-
Is there a version of Quicktime compatible with Windows 8.1
Is there a version of QuickTime compatible with Windows 8.1 that can be used to play enhanced cd contents?
-
This phone is **bleep**
This phone is terrible. I have been a blackberry supporter for 6 years, I always defend their phones against IPhone people and I have always said I will stick with them but this Z10 is a piece of **bleep**. I have gone from being a net promoter to a
-
I just installed Flash CC eager to try out the features and quickly discovered that any fla that I opened that uses Library embedded fonts completely looks mangled, the font is wrong, kerning gets screwed up, text randomly is cut off. Very dissapoint