Patchadd interrupted - now failing to install patch correctly

I had started a patch installation when one of my kind users compromised the system by filling all available swapspace.
I tried tto get into the system but failed. After about 10 minutes I did - what I should have avoided to do - a control C on the
unresponsive patchadd command.
The result is that the patch is not committed, but also not removed. The system's response to a patchrm is
beron# patchrm 127144-03
Validating patches...
Loading patches installed on the system...
Done!
Checking patches that you specified for removal.
Done!
Approved patches will be removed in this order:
127144-03
The installation of patch 127144-03 was interrupted.
Patchadd needs to be re-invoked to ensure proper installation of the patch.
Patchrm is terminating.
WARNING: patchrm returned <14>
And if I intend to do a re-install on the patch itself I get
oberon# patchadd 127144-03
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
The following requested patches are already installed on the system
Requested to install patch 127144-03 is already installed on the system.
No patches to check dependency.
Any suggestion on what I could do to tidy the system up, would be very welcome.

lance is already taken wrote:
I have uninstalled and reinstalled some more.
The following do not work:
Apple Bluetooth
Apple Trackpad
Apple Keyboard
Apple Remote (IR Receiver)
I still cannot use the F keys.
Also, OS X does not seem to recognize that I have bootcamp: I cannot select it in the start up disk area. VMWare cannot prepare my Boot Camp partition as a virtual machine. Why am I encountering so many problems?
Edit: Oh and the Built in iSight doesn't work either. Awesome.
You should solve one problem at a time.
If your system does not recognize Windows, don't start playing with VM ware or Parallels. You don't fix something by bypassing it.
If you cannot boot into your Windows partition using bootcamp, that that's the first thing to fix.

Similar Messages

Smpatch update ALERT: Failed to install patch

I do not even know where to start. Since installing Solaris 10 0606 it
seems every time I try to patch the system I get failures of one type
or another. One problem today has to do with zones:
"To install the new instance of this package in all zones you must
first remove the existing instance of this package from the global
zone first (via pkgrm) and then install the new instance of this
package in all zones."
If sun already knows a pkgrm must be run why can't the smpatch command
just do it?
Another problem seems to be
For patch 121018-03, required patch 120759-04 does not exist
If sun knows a patch is required which is not on the system just Getit
and install it.
Also, what is up with having to reboot the box to install patches?
Why? Has this always been a required step? Do these reboots pertain only to kernel patches .etc?
I have seen other postings in this forum expressing unhappiness with
the patch system, some mentioning testing lab/group or certification
issues. I think smpatch should have an option to send smpatch results
back to sun for review. That way the Certification Group could have
real life situations to investigate. Or do they know the problems
already and just dont want to fix them? Just once I would love it if
smpatch came back with no failures and I was assured the system was
patched, up to date and secure.
Regards
# smpatch update
Update 120759-07 will not be downloaded since it already exists in the
download directory.
Update 121018-03 will not be downloaded since it already exists in the
download directory.
Update 121016-03 will not be downloaded since it already exists in the
download directory.
Update 121020-02 will not be downloaded since it already exists in the
download directory.
Update 121616-02 will not be downloaded since it already exists in the
download directory.
Update 120762-02 will not be downloaded since it already exists in the
download directory.
Installing patches from /var/sadm/spool...
Failed to install patch 120759-07.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:120759-07 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 120759-07 are not installed on the
system.myzone2: Packages from patch 120759-07 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:120759-07 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:120759-07 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 120759-07 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/120759-07/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 120759-07.
Failed to install patch 121018-03.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121018-03,
required patch 120759-04 does not exist.No patches to install.
ALERT: Failed to install patch 121018-03.
Failed to install patch 121016-03.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121016-03,
required patch 120759-06 does not exist.No patches to install.
ALERT: Failed to install patch 121016-03.
Failed to install patch 121020-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!The following
requested patches will not be installed becauseno patches required by
the patch are installed on this system. 0 For patch 121020-02,
required patch 120759-01 does not exist.No patches to install.
ALERT: Failed to install patch 121020-02.
Failed to install patch 121616-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:121616-02 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 121616-02 are not installed on the
system.myzone2: Packages from patch 121616-02 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:121616-02 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:121616-02 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 121616-02 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/121616-02/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 121616-02.
Failed to install patch 120762-02.
patchadd utility failed. Reason code :0
Validating patches...Loading patches installed on the
system...Done!Loading patches requested to install.Done!Checking
patches that you specified for installation.Done!Approved patches will
be installed in this order:120762-02 Preparing checklist for
non-global zone check...Checking non-global zones...The following
requested patches rejected on non-global zone.Entire installation is
possible but those patcheswill not be installed on non-global
zone.myzone: Packages from patch 120762-02 are not installed on the
system.myzone2: Packages from patch 120762-02 are not installed on the
system.This patch passes the non-global zone check.None.Summary for
zones:Zone myzoneRejected patches:120762-02 Patches that passed the
dependency check:None.Zone myzone2Rejected patches:120762-02 Patches
that passed the dependency check:None.Patching global zoneAdding
patches...Checking installed patches...Verifying sufficient filesystem
capacity (dry run method)...Patch 120762-02 failed to install due to a
failure produced by pkgadd.See /var/sadm/patch/120762-02/log for
detailsPatchadd is terminating. WARNING: patchadd returned <5> for
global zone
ALERT: Failed to install patch 120762-02.
/var/sadm/spool/patchpro_dnld_2006.08.22@11:16:20:EDT.txt has been
moved to
/var/sadm/spool/patchproSequester/patchpro_dnld_2006.08.22@11:16:20:EDT.txt
#

Enterprise users have strict policies on change management so dependent patches are not automatically installed when using "smpatch add". Neither are packages blithly uninstalled for zones if currently only existing in the global zone.
For your needs using "smpatch update" should analyse, download and install dependant patches in order for patches specified on the command line or for a global update. Note that that is with the exception of patches not matching the currently defined patch policy such as those needing a reboot. See the smpatch man page for information on policies.
Patches requiring reboots or being installed in single user mode are primarily for kernel and driver patches.
Your problems installing the Sun Studio 11 patches have been encountered previously in regards to globally installed packages (and are covered in this forum) and is due to a combination of bug ID's 6337009, 6214678 and 6374972 for the patching utilities of which the last is still open.
You will currently have to manually install the patches using patchadd with the "-G" flag whilst in the global zone to install them in the global zone only.

Smpatch update ALERT: Failed to install patch 121616-02

I am getting various Failed to install patch alerts when doing smpatch update. Many patches are aparently applied successfuly, but others are not. I do not have Sun Support since it is my personal X86 box. Are other people getting these failures? If so, what is done to investigate / fix the problems? If I had support what would Sun recommend be done to correct the problem? Should smpatch always run clean with no errors? Regards.

I will post to the other forum as well, but I can't think of a more "general" Solaris discussion topic than how to / what to expect when applying patches. I am not sure I agree with your comment "it's best to only install the patches that are really needed". I thought smpatch update "decided" which patches are needed given the system it is run on.
Is your comment based upon best practices published somewhere? How do you as a sysAdmin decide which patches are really needed?
I would like to hear from the community how they patch their boxes and if smpatch is working for them, especially in a production environment. I have a stand alone system, but how are people in an environment with test systems patching? Are they using smpatch? In general, how are people keeping their systems updated, reliable, bug free and secure?
Regards,

Failed to install patch 126411-01

I had patched my system using smpatch but failed.
#uname -a
SunOS SunOS 5.10 Generic_138889-08 i86pc i386 i86pc
#smpatch analyze
You have new messages. To retrieve: smpatch messages [-a]
125556-03 SunOS 5.10_x86: patch behavior patch
126411-01 StarOffice 8 (Solaris_x86): ARCH patch to enable install of >= Update 6
120186-17 StarOffice 8 (Solaris_x86): Update 12
# smpatch update
You have new messages. To retrieve: smpatch messages [-a]
125556-03 has been validated.

126411-01 has been validated.
120186-17 has been validated.
Installing patches from /var/sadm/spool...
125556-03 has been applied.

Failed to install patch 126411-01.
Utility used to install the update failed with exit code 8.
Validating patches...Loading patches installed on the system...Done!Loading patches requested to install.Done!The following requested patches have packages not installed on the systemPackage SUNWstaroffice-core01 from directory SUNWstaroffice-core01.i in patch 126411-01 is not installed on the system. Changes for package SUNWstaroffice-core01 will not be applied to the system.Package SUNWstaroffice-core01 from directory SUNWstaroffice-core01 in patch 126411-01 is not installed on the system. Changes for package SUNWstaroffice-core01 will not be applied to the system.Checking patches that you specified for installation.Done!The following requested patches will not be installed becausethe packages they patch are not installed on this system. 0 No Packages from patch 126411-01 are installed on the system.No patches to install.

Failed to install patch 126411-01.
ALERT: Failed to install patch 126411-01.
Failed to install patch 120186-17.

Utility used to install the update failed with exit code 2.
......

The StarOffice patches are most likely being recommended as there are one or more SUNWstaroffice packages installed on the system, but the patch installation cannot complete due to an incomplete installation of StarOffice. Check for any installed StarOffice packages and remove them if present:
# pkginfo | grep SUNWstaroffice

Failed to install packages correctly

Hi,
duringf my latest upgrade, (on x86_64) I had a strange problem: for almost all packages, pacman wrote:
error: command failed to execute correctly
Directly after that, my system became unusable, because every command returned: "Too many levels of symbolic links".
I had to force power off, reboot did of course not work. A fsck on the root partition from a live cd showed some errors on the jfs file system, but it could be recovered, at least it is in a stable state again.
I mounted it and made a backup. Then I noticed dead symlinks on the partition.
I created a new ext4 fs on the partition and restored the backup. But I still can't chroot into the system because chroot cannot execute bash, still too many levels of symbolic links.
I can at least use pacman with the -r option to list the packages. I tried pacman -S base -r /oldroot , but I still get the same error (error: command failed to execute correctly).
Any further advices? Or the fastest way to reinstall the system?

Thanks Pavel.
I have all patches installed on my servers that described in Solaris[TM] Live Upgrade Software: Minimum Patch Requirements
https://support.us.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=1004881.1
Is 10_sparc_lustarter_patchset.zip can be download in MOS? I searched in Patches and Updates but can't find it. Can you send me the link or internal NFS location of the 10_sparc_lustarter_patchset.zip file?
Thanks
Tiffany

Failed to install patch 8487427 for EBS 12.1.1

Hi, I have a problem installing the patch 8487427 for EBS 12.1.1
the install log is:
Time is: Tue Nov 22 2011 13:09:50
FAILED: file MTH_PROD_MTL_CONSUMED_STG.xdf on worker 2 for product mth username APPS.
Time is: Tue Nov 22 2011 13:09:51
FAILED: file MTH_PROD_MTL_CONSUMED_TXN_STG.xdf on worker 1 for product mth username APPS.
Time is: Tue Nov 22 2011 13:09:51
There are now 169 jobs remaining (current phase=A2):
1 running, 1 ready to run and 167 waiting.
FAILED: file MTH_PROD_MTL_PRODUCED_TXN_STG.xdf on worker 4 for product mth username APPS.
Time is: Tue Nov 22 2011 13:09:51
FAILED: file mth_tag_readings.xdf on worker 3 for product mth username APPS.
Time is: Tue Nov 22 2011 13:09:52
ATTENTION: All workers either have failed or are waiting:
     FAILED: file MTH_PROD_MTL_CONSUMED_TXN_STG.xdf on worker 1.
     FAILED: file MTH_PROD_MTL_CONSUMED_STG.xdf on worker 2.
     FAILED: file mth_tag_readings.xdf on worker 3.
     FAILED: file MTH_PROD_MTL_PRODUCED_TXN_STG.xdf on worker 4.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Current time is: Tue Nov 22 2011 13:09:52
and adwork001.log is:
================================================================================
Applying XDF file : C:\oracle\PROD\apps\apps_st\appl\mth\12.0.0\patch\115\xdf\MTH_PROD_MTL_CONSUMED_TXN_STG.xdf
================================================================================
Table Name is MTH_PROD_MTL_CONSUMED_TXN_STG
Table exists in the target database
Checking for differences
Number of columns for the table in the xml file is 30
INFO: An additional column WORKORDER_FK exists in the target database
The table MTH_PROD_MTL_CONSUMED_TXN_STG is missing the column WORKORDER_FK
Warning: The missing column is NOT NULL and there is no default value to apply
Adding a nullable column with the statement
Executing statement
ALTER TABLE MTH.MTH_PROD_MTL_CONSUMED_TXN_STG ADD ( WORKORDER_FK VARCHAR2(240) NULL )
Start time for statement above is Tue Nov 22 13:09:51 GMT-04:00 2011
End time for statement above is Tue Nov 22 13:09:51 GMT-04:00 2011
Error in executing statement ALTER TABLE MTH.MTH_PROD_MTL_CONSUMED_TXN_STG ADD ( WORKORDER_FK VARCHAR2(240) NULL )
Error message is ORA-01430: la columna que se esta agregando ya existe en la tabla
Error code is 1430
Updating task with status 1
AD Worker error:
The utility FndXdfCmp returned error for the above task.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Nov 22 2011 13:09:51
thanks for your help

Did you apply the patch with "options=checkprereq" as mentioned in the patch README file to ensure that all necessary prerequisites have been applied successfully before applying this patch?
Thanks,
Hussein

Downloading xCode interrupted - Now marked as Installed!!

Hi, All. My internet connection interrupted when downloading xCode. Now App Store shows it as Installed with a red mark "An error has occurred". And xCode is not in my application list. How can I redownload it or remove this mark "installed: in App Store so that I could be able to download it again and install it?
Any help would be appreciated.

Have you read
http://blog.linuxacademy.com/apple-2/how-to-uninstall-xcode-from-mac-app-store/

Difficulty in installing Patch manager 2 on Solaris 9

Hello,
I have a Solaris 9 machine on which I am trying to install Patch Manager
2. I have PatchPro 2.2 also installed on the same machine.
Since PatchManager2 requires some patches to be installed previously
like: 112945 117593 117595, I tried to install these. The last one
117595 if I understood correctly contains the patch manager itself. The
problem is that I installed 112945-40 which the patch manager doesn't
like and would instead require 112945-27. I tried patchrm 112945-40 and
patchrm -f 112945-40 but invain. I also tried patchadd 112945-27 and
patchadd -u 112945-27 but invain also.
# patchadd -u 112945-27
Checking installed patches...
Executing prepatch script...
Verifying sufficient filesystem capacity (dry run method)...
Patch 112945-27 failed to install due to a failure produced by pkgadd.
See /var/sadm/patch/112945-27/log for details
Patchadd is terminating.
The following is the log file:
Package not patched:
PKG=SUNWdclnt
Original package not installed.
Package not patched:
PKG=SUNWlvma
Original package not installed.
Package not patched:
PKG=SUNWmga
Original package not installed.
Package not patched:
PKG=SUNWpmgr
Original package not installed.
Package not patched:
PKG=SUNWwbdev
Original package not installed.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
PaTcH_MsG 1 Patch number 112945-27 is superceded by the already
applied 112945-40.
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
WARNING: /etc/rc0.d/K36wbem <no longer a regular file>
WARNING: /etc/rc1.d/K36wbem <no longer a regular file>
WARNING: /etc/rc2.d/S90wbem <no longer a regular file>
WARNING: /etc/rcS.d/K36wbem <no longer a regular file>
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
I am really confused as what I need to do since even trying to install
117595-03 gives:
# patchadd 117595-03
Checking installed patches...
One or more patch packages included in
117595-03 are not installed on this system.
Patchadd is terminating.
Can anyone help me out please?
Regards,
Darren

Similar problems with patch manager...
Since PPro is being decommisioned and the suggestion is to go with PM 2, I went ahead and uninstalled PPro.
Now, for PM, the required patch is 112945-35 or higher, which I had on the system, excep that I have no smpatch command anywhere.. I backed out 112945-40 and reinstalled it, only to get the following:
Checking installed patches...
Executing prepatch script...
Verifying sufficient filesystem capacity (dry run method)...
Installing patch packages...
Patch number 112945-40 has been successfully installed.
See /var/sadm/patch/112945-40/log for details
Executing postpatch script...
cp: cannot access //usr/sadm/lib/wbem/providerutility.jar
cp: cannot access //usr/sadm/lib/wbem/sunwbem.jar
Unable to access "/usr/sadm/lib/wbem/providerutility.jar"
Usage:
smccompile -c <beanname>
smccompile -j tool|service [-n <altname>] <jarfile>
smccompile -j library [-n <altname>] ALL|ALLTOOL|ALLSERVICE|<tool or ser
vice bean to attach to> <jarfile>
Patch packages installed:
SUNWdclnt
SUNWlvma
SUNWmccom
SUNWwbapi
SUNWwbcor
SUNWwbmc
TIA...

Adobe CS5 Design Standard - Some updates failed to install

I am tying to find a solution to this problem, and am unable to find a way to contact Adobe directly for customer assistance. When I click on the Customer Support link at the bottom, the page that loads says, "Error 'This serial number is not for a qualifying product...' when installing an upgrade or upsell." I didn't install an upgrade version of CS5, and I didn't have it on more than one computer. My hard drive crashed at the end of 2013, and I had to replace it with a new one. I wasn't able to deactivate the product on the old hard drive, but it installed just fine on the new one. Now the updates will not work.
Does anyone know how to fix this or how to contact Adobe directly for help? Thanks.

I am also experiencing this same issue. I purchased the CS5 Master Collection in 2011 and it is now failing to install updates. My Adobe Application Manager is giving me the same error messages that you are getting. The Customer Support link takes me to the same website. Adobe Support just told me to come on here to find the answers that I seek because CS5 is no longer supported by support specialists. It's pretty discouraging to see that nobody has answered you since you posted this in July.

Current update failed to install properly. Downloaded current version and now I have the error message regarding MSVCR80.dll Itunes worked well to before the update. How can I correct this error?

An update was downloaded and failed to install properly. When I tried to use the old Itunes, I get the message "The program can't start because MSVCR80.dll is missing from your computer". I then received the message "iTunes was not installed correctly. Please reinstall iTunes"I tried reinstalling with the same error message. I then uninstalled the old version, downloaded the new version and still received the same message. How do I solve this problem?

Followed mspanner's instructions and was able to correct the problem. Thanks for the help.

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer s

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?

Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd.

Adobe Reader 11 MUI failing to install using transform and patch 11.0.10 via cmd/SCCM in one package

Hello,
I have all the files, MST and the patch located in one folder. I am trying to use the following MSI command lines locally on my computer before I can attempt to deploy this via SCCM 2012. I am having issues either with the package not compatible or using /p and getting the MSIEXEC help window prompt. I've tried a few command lines:
msiexec /i AcroRead.msi PATCH="AdbeRdrUpd11010_MUI.msp" TRANSFORMS="AcroRead.mst"
msiexec /i AcroRead.msi /p AdbeRdrUpd11010_MUI.msp TRANSFORMS="AcroRead.mst"
msiexec /i AcroRead.msi TRANSFORMS="AcroRead.mst" /p AdbeRdrUpd11010_MUI.msp
Adding /qn on the end makes the install work silently when not attempting to include the patch, but fails to install it silently when only using the transform file that I have selected in the wizard to silently install.
We have 5 different versions from 8.0 through 10.0 in our environment of 3000 machines. Sadly this was not managed before...I can easily update our current 11.0 versions that range from 11 to 11.0.09 by only applying the patch to them but need to get the full install working for the 2500 machines I need to target.
I tried using the /a command which seems to work, but creates program files and common files folders inside my adobe folder on the desktop when executing it from the cmd. Am i suppose to package that folder all in one and then use the /i command to install adobe? I've been researching for a week but finally hit a wall where I dont think I am getting anywhere.
Thank you in advance,
Kevin

I have almost answered my own question as I just came across this link
https://it-god.co.uk/deploy-adobe-reader-xi-11-0-10-with-sccm-2012/
This is for the plain reader version, but we use MUI now (due to other languages required in our environmet). I get to the part where it asks to apply the patch to the AIP folder but it fails.
msiexec /p AdbeRdrUpd11010.msp /a C:\Reader\11.0.10\AcroRead.msi
I changed this to account for the MUI naming,
msiexec /p AdbeRdrUpd11010_MUI.msp /a C:\Reader\11.0.10\AcroRead.msi
But I get the windows prompt that says this package can not be opened, please verify. I ensured that both the patch and base install were MUI versions, and i downloaded fresh copies of each. I also unblocked the patch so that it can run. No luck so far.
EDIT: Using another guide i found the command line (modified the path to my location) and this worked,
msiexec /a C:\adobe\Reader\11.0.10\AcroRead.msi /qb /p AdbeRdrUpd11010_MUI.msp TARGETDIR=C:\adobe\Reader\11.0.10\

Patch 120185-09 failed to install (SO update 5)

hi,
on a SunOS 5.9 Generic_117171-09 sun4u sparc SUNW,Sun-Fire-15000
i have this error:
Checking installed patches...
Verifying sufficient filesystem capacity (dry run method)...
Patch 120185-09 failed to install due to a failure produced by pkgadd.
See /var/sadm/patch/120185-09/log for details
Patchadd is terminating.
14:29 filesrv1:/home/mets1/wcohrs>more /var/sadm/patch/120185-09/log
Package not patched:
PKG=SUNWstaroffice-es
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-es-help
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-es-res
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-fr
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-fr-help
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-fr-res
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-hu
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-hu-help
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-hu-res
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-it
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-it-help
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-it-res
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-nl
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-nl-help
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-nl-res
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-onlineupdate
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-pl
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-pl-help
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-pl-res
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-pt-BR
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-pt-BR-help
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-pt-BR-res
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-ru
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-ru-help
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-ru-res
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-sv
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-sv-help
Original package not installed.
Package not patched:
PKG=SUNWstaroffice-sv-res
Original package not installed.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
/mets1/user3/wcohrs/tmp/120185-09/SUNWstaroffice-base/install/checkinstall: /mets1/user3/wcohrs/tmp/1
20185-09/SUNWstaroffice-base/install/checkinstall: cannot open
pkgadd: ERROR: checkinstall script did not complete successfully
Dryrun complete.
No changes were made to the system.
please help
regards
Wolfgang
Message was edited by:
kasimong
solved
see
http://forum.java.sun.com/thread.jspa?threadID=5066286&tstart=0

The StarOffice patches are most likely being recommended as there are one or more SUNWstaroffice packages installed on the system, but the patch installation cannot complete due to an incomplete installation of StarOffice. Check for any installed StarOffice packages and remove them if present:
# pkginfo | grep SUNWstaroffice

Failing to load processes after installing patch 10.1.2.3

I have installed patch 10.1.2.3 after Oracle advised that it may resolve some database adapter problems I was getting in 10.1.2.0.2. However after installing the patch, many of the BPEL processes are now failing to load when I bounce the OC4J component and I am getting ORABPEL-05215 errors.
I turned on debug logging and an extract of the log file is as follows, has anybody got any ideas on how I might resolve these errors;
<2008-07-09 15:32:33,311> <ERROR> <default.collaxa.cube.engine.deployment> <CubeProcessLoader::create>
<2008-07-09 15:32:33,310> <ERROR> <default.collaxa.cube.engine.deployment> Process "DRSSecuritiesReader" (revision "1.0") load FAILED!!
<2008-07-09 15:32:33,375> <DEBUG> <default.collaxa.cube.engine.dispatch> <BaseDispatchSet::receive> Receiving message log process event message afa47b51cbfc4dfa:4ee70b:11b0
83c6e51:-7ffc for set system
<2008-07-09 15:32:33,376> <DEBUG> <default.collaxa.cube.engine.dispatch> <Dispatcher::adjustThreadPool> Allocating 1 thread(s); pending threads: 1, active threads: 0, total
: 0
<2008-07-09 15:32:33,378> <DEBUG> <default.collaxa.cube.engine.dispatch> <QueueConnectionPool::getConnection> Fetched a queue connection from pool java:comp/env/jms/collaxa
/BPELWorkerQueueFactory, available connections=24, total connections=25
<2008-07-09 15:32:33,403> <DEBUG> <default.collaxa.cube.engine.dispatch> <DispatcherBean::send> Sent message to queue
<2008-07-09 15:32:33,403> <DEBUG> <default.collaxa.cube.engine.dispatch> <QueueConnectionPool::releaseConnection> Released queue connection to pool java:comp/env/jms/collax
a/BPELWorkerQueueFactory, available connections=25, total connections=25
<2008-07-09 15:32:33,404> <DEBUG> <default.collaxa.cube.engine.deployment> <CubeProcessHolder::bind> Exception while loading process
java.lang.AbstractMethodError
at com.collaxa.cube.engine.core.BaseCubeProcess.loadActivationAgents(BaseCubeProcess.java:946)
at com.collaxa.cube.engine.core.BaseCubeProcess.load(BaseCubeProcess.java:310)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:66)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:391)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.load(CubeProcessLoader.java:302)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:882)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.getProcess(CubeProcessHolder.java:790)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAll(CubeProcessHolder.java:362)
at com.collaxa.cube.engine.CubeEngine.loadAllProcesses(CubeEngine.java:910)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:284)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:250)
at com.collaxa.cube.ejb.impl.ServerBean.loadProcesses(ServerBean.java:219)
at IServerBean_StatelessSessionBeanWrapper14.loadProcesses(IServerBean_StatelessSessionBeanWrapper14.java:2466)
at com.collaxa.cube.admin.agents.ProcessLoaderAgent$ProcessJob.execute(ProcessLoaderAgent.java:401)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)
<2008-07-09 15:32:33,419> <ERROR> <default.collaxa.cube.engine.deployment> <CubeProcessHolder::loadAll> Error while loading process 'DRSSecuritiesReader', rev '1.0': Error
while loading process.
The process domain encountered the following errors while loading the process "DRSSecuritiesReader" (revision "1.0"): null.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "DRSSecuritiesReader" (revision "1.0"): null.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:1270)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:883)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.getProcess(CubeProcessHolder.java:790)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAll(CubeProcessHolder.java:362)
at com.collaxa.cube.engine.CubeEngine.loadAllProcesses(CubeEngine.java:910)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:284)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:250)
at com.collaxa.cube.ejb.impl.ServerBean.loadProcesses(ServerBean.java:219)
at IServerBean_StatelessSessionBeanWrapper14.loadProcesses(IServerBean_StatelessSessionBeanWrapper14.java:2466)
at com.collaxa.cube.admin.agents.ProcessLoaderAgent$ProcessJob.execute(ProcessLoaderAgent.java:401)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)

I forgot to mention that I did flush the JAR cache to make sure the new JAR's would be downloaded.
Gerrit

Photoshop CC 2015 Keeps Failing to Install: Problem With a Patch

Hi all,
I tried to install Photoshop. I got pretty far but then the installing stopped and bright orange letters popped up saying Installation Failed or something similar to that. I clicked on the Learn More link next to the message.
It said there was a problem with one of the patches, so it failed to install. It told me to re-try in a few minutes.
A few minutes later, I re-tried it and now it says Update Failed - Learn More. I kept re-trying and it ends up doing the same thing over and over.
It told me to contact customer support.
..so here I am.
How do I fix this?
Thanks

Benh89930539 I would recommend reviewing the installation log files for update which is failing to apply. You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC. You are welcome to post any specific errors located to this discussion.

Patchadd interrupted - now failing to install patch correctly

Similar Messages

Maybe you are looking for