Patched ORACLE_HOME with running DBs. No issues !!

Oracle Version      : 11.1.0.7
OS           : AIX 6
Patch Applied      : April 2011 PSU
We have 9 DBs running from an ORACLE_HOME. To apply PSU , i was supposed to bring down the DBs running from this ORACLE_HOME. But i forgot to SHUTDOWN all the DBs from this ORACLE_HOME and issued the following command.
$ORACLE_HOME/OPatch/opatch apply ./11724936 -local -invPtrLoc $ORACLE_HOME/oraInst.locThe patching seems to be successful ! because the lsinventory doesn't show any errors
Output of
$ORACLE_HOME/OPatch/opatch lsinventory -invPtrLoc $ORACLE_HOME/oraInst.loc
doesn't show any errors. At the end it says
OPatch succeeded.I am curious on how oracle managed to patch the binaries which the Databases where accessing ???

We bounced the DB after the PSU patch apply. The DB seems to be fine.
I checked the alert log. I can see lots of
WARNING: Oracle executable binary mismatch detected.
Binary of new process does not match binary which started instance
issue alter system set "_disable_image_check" = true to disable these messages
Sun Aug 09 20:18:29 2011

Similar Messages

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

HT3131 Are there any ventilation issues with running a macbook air in clamshell mode?

Are there any ventilation issues with running a macbook air in clamshell mode?

...that makes sense to me.
but, why do so many MBA users (on this forum and others) claim that ventilation occurs through the keyboard? Is this claim based on an old macbook design?
for example, here's a related discussion (although fairly old):
11-08-2010, 12:16 PM
#6 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by tHE j0KER
Actually I you shouldn't close the lid while running on an external screen. The keyboard of the Macbook is an air intake for the fan. Close the lid, and it could overheat.
A common misconception of unknown origin. The intake and the exhaust for the cooling fan on the 13" MB and MBP are both located on the rear slot at the base of the hinge. In fact, you can actually see the divider that separates the intake flow from the output flow. If it were through the keyboard crevices, then an awful lot of overheats would result from people using impermeable keyboard covers, as well as Apple's warranty department would be flipping out over the Apple store carrying such covers. iSkin ProTouch FX Keyboard Cover for all MacBooks - Black Printed Keys on White - Apple Store (U.S.)
Does one think that Apple sells these only for use when the Notebook is off??? http://store.apple.com/us/product/TW...co=MTM3OTUwMDE Closing the lid, whilst operating the unit actually results in cooler operation due to reduction in power consumed by operating the display, which in supporting the on-board display generates heat far greater than simply powering the video port..
Does one think that Apple sells these for use only when the MacBook is off? http://store.apple.com/us/product/TW...co=MTM3OTUwMDEApples direction for use is specifically for when using with an external display.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion
11-08-2010, 02:34 PM
#7 (permalink)
ajreynol
Notebook Virtuoso
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,542
Rep Power: 18
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
once again, I've tried a few of these keyboard covers. the Moshi keyboard cover is the ONLY one I can recommend. the others are too thick or change the keyboard experience too much.
17" Apple MacBook Pro | i7 2720m | 160GB SSD + 750GB | 16GB | HD 6750M 1GB
Dell 435MT | i7 920 | 10GB RAM | 7.64TB HDDs | HD 6970 | Win7+SL
HP Elitebook 2710p Tablet PC | 1.8GHz C2D | 4GB RAM | 160GB HDD | X3100
Apple iPhone 4 32GB | Apple iPad 64GB (Gen 3)
Stop random laptop wakeup | 5K500.B bench data | How to Disable PowerMiser
Disable Vaio beep when pressing volume or special keys
11-08-2010, 03:34 PM
#8 (permalink)
doh123
Without ME its just AWESO
Join Date: Feb 2009
Posts: 3,282
Rep Power: 22
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
2. The thing you plug into the wall is not a battery charger. The actual "charger" is built into the computer. It knows when to charge and when not to. If the little light on the power plug is amber, then its charging your battery. When its green, its just powering the laptop and NOT charging your battery at all.
Mac OS X Gamer/Porter
(We do exist!)
Wineskin 2.5 is available!. Turn Windows apps into Mac apps for free!
11-08-2010, 03:38 PM
#9 (permalink)
Wolfpup
Notebook Virtuoso
Join Date: Jun 2007
Posts: 3,871
Rep Power: 28
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
I'd leave the lid open, at least partially...yes it may be fine not doing that, but you are making heat dissipate worse, of course could even theoretically hurt the screen.
As for the battery...well there's really only two choices, have it plugged in or not. As others mentioned, you can't overcharge the battery. It can be damaged a bit from heat, but of course the number one thing that's going to damage it is discharging it...so it's a no brainer-use it plugged in whenever possible, and try to charge it whenever possible when it's not plugged in.
11-08-2010, 03:45 PM
#10 (permalink)
SP Forsythe
Notebook Evangelist
Join Date: Jul 2007
Location: California
Posts: 660
Rep Power: 14
Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
Quote:
Originally Posted by doh123
1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
Nope. Apple would disagree with you on that one. Any "closure", which is, when compared to the amount of CFM, is insignificant. In fact, the opening size remains the same. it is only deflected at a slight angle when the lid is closed. Tilt your MBP and see. As well, shutting down the display lowers the heat being generated, even in the lower case. As I said, if it were a problem, Apple would not be selling stands designed to operate your unit in the closed position as the original poster of this thread proposes to do.
Currently using:
Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion

A simple app to secure coldfusion pages - Running into an issue with Session

Hello, I am testing out how to protect pages in coldfusion and have run into an issue when attempting to create a process by which users can log out.
Essentially, I have three pages:
Page A - The form that submits to Page B
Page B - That checks the form.username and form.password against a database (works fine)
Page C - Logout page (Which is where I am having an issue).
Page C throws a "variable Session is undefined" error
Here is the code on Page C:
<cfset StructClear(Session)>
<cflocation url="index.cfm">
Here is the code on Page B:
<cfif NOT IsDefined ("form.username")>
<cflocation url="index.cfm" addtoken="No">
</cfif>
<cfquery name="test" datasource="cfdb">
SELECT * FROM USERS
WHERE USERNAME = '#FORM.username#'
AND PASSWORD = '#FORM.password#'
</cfquery>

<CFIF test.RecordCount IS 0>
<cflocation url="index.cfm" addtoken="No">
<CFSET StructClear(Session)>
<cfelse>
<CFSET Session.LoggedIn = "1">

</cfif>
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<a href="logout.cfm">Log Out</a>
 
 
 
This content is protected.

</body>
</html>
As you can see, nothing fancy
Now, I thought that the Session variable could be accessed by any page within a given browser instance, but I am obviously wrong.
What do I need to do for Page C (my logout page to be able to access the session variable).
Any guidance is greatly appreciated!

1.
“Variable Session is undefined” error comes up when you try to manipulate a session variable which does not exist, as at that point in time. To take care of possible empty session structures, it is good practice to check first if your session is defined.
So you will have something like:
<cfif isDefined("session")>
<cfset StructClear(Session) />
<cfelse>
<cflocation url="index.cfm">
</cfif>
2.
To enable you access your session variables from any page in your application, you need to enable session management in your Application.cfm or Application.cfc.
cfm <cfapplication sessionmanagement="Yes" />
cfc <cfcomponent>
<cfset THIS.SessionManagement = "Yes" />
</cfcomponent>
Reference…http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c24 -7c48.html

Has anyone run into an issue with their hotmail account being hacked on ios 6 ?

Im noticing that I am getting strange MALIER DEAMON emailsadvising me that my email to whomever could not be sent.I have preiously run into this issue and it turned out my yahoo account had been hacked when I began getting those messages. Has this happened to anyone else?

Try this:
Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse. ONce the computer starts up again, wait for the pop-up looking for a mouse. Turn on the power to the bluetooth mouse. It should work normally now.

I have 2 sons that were sharing one account and now I want to separate them, will I run into any issues ?

I have twin sons and my wife sharing one itunes account and now from what a relative told me I should split them up since face time from my sons itouch is showing up on my wife's iphone ... so I started a new itunes account for all 3 of them, and now I want to sync each of their devices with their own accounts, before they had all the same music, etc... will I run into any issues when syncing each of their devices... meaning will I see a message like "this device is synced with another account and then it will say if I proceed it will erase what is on the device" ... ?? will I see this or will it just sync as normal
Thanks

You can't merge accounts or transfer iTunes purchases from one Apple ID to another: but there is no problem about using two IDs.
Use your iCloud ID for iCloud for syncing email, contacts, calendars, bookmarks, and PhotoStream.
Use your other Apple ID as before for iTunes, iTunes in the Cloud and iTunes Match.
There's no conflict about doing this, and you won't even notice as Keychain will log you in with the correct ID in each case. It's also better security not to have your iTunes login also your email address, given the number of complaints about hacked iTunes accounts.

Moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

When I work with a drive to boot many computers, I use the newest model computer I will be booting, and set the system up on that, run all the Apple updates. Normally I will have no issue booting any older computer with the same drive. Unless of course those older computers do not support the operating system on that drive.
If you want to test if the drive will boot the mac mini. Put your MacBook Pro into target mode. Connect the two computers together. And on the Mac Mini, go into system preferences and then under start up disk and see if the target disk mode computer's drive shows up there. Seelct that drive and restart. See if it boots ok. A bit easier then taking the drives out and moving things around.

AdbeRdr710_it_IT.exe problem with RUNAS

Hi,
I'm trying to update Acrobat Reader 7.0.9 to version 7.1.0 on Windows XP SP2.
For deploying reason i need to impersonate Administrator before launching AdbeRdr710_it_IT.exe, but i get the error code -529697949.
If I log on client with Administrator i don't have the problem, so the problem only happens with "runas" (i tried runas with other domain admin users and the problem is the same).
Any ideas?
Best Regards,
Gianluca

yes, you need to be local admin to be able to elevate!
I've tested this on a system here and I reproduce the issue you encountered. Some investigation showed running a program that requires elevation using runas is not possible http://msdn.microsoft.com/en-us/library/bb756922.aspx
MCP/MCSA/MCTS/MCITP

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Problem with runas command. Elevation error

Running on Win 8.1 Pro I'm facing a problem with runas.
What I'm trying to do is launch an mmc as my domain admin account.
Therefore I type this command from an elevated cmd (Right-click "Run as Administrator"):
runas /user:Contoso\MyDomainAdmin /noprofile mmc
This worked like a charm in Windows 7, and on my Win81Pro client it yields:
RUNAS ERROR: Unable to run - mmc
740: The requested operation requires elevation.
The account I'm logged in with, is local admin, and the UAC slider is set in the bottom.
In the eventviewer, I only see some special logons where my normal account is trying to impersonate my domain admin account, and the next event, the domain admin's session is destroyed.
If this is by design, how would I then run mmc as my domain admin and at the same time avoid its credentials being stored on the local machine?
Thanks in advance!

yes, you need to be local admin to be able to elevate!
I've tested this on a system here and I reproduce the issue you encountered. Some investigation showed running a program that requires elevation using runas is not possible http://msdn.microsoft.com/en-us/library/bb756922.aspx
MCP/MCSA/MCTS/MCITP

Safari unexpectedly quit with warning of Security Issue

Safari unexpectedly quit with warning of Security Issue.
A window appeared that said,
"Safari Alert
Suspicious Activity Might have been detected
Major Security Issue
To Fix it please call Support for Apple 1-800656-8559 (Toll Free) Immediately
Browser can't connect to the Server"
I did not believe this message and went to Apple support using Firefox and found the answer by stedman1, under a previous submission by mjbaur.
I just want to complement stedman1 and make sure he gets some points.

SCAM
NEVER follow instructions
use another browser
The Safe Mac » Adware Removal Guide
download and run AdwareMedic
be safe when visiting SOME websites - in cahoots OR have been hacked
ÇÇÇ

CC 2014 Progs leave me plagued with out of memory issues which the previous versions don't exhibit.

The new CC 2014 suite of progs seem rather memory hungry? I am plagued with out of memory issues trying to use them. The old CC progs work just fine! Is there a new minimum spec for memory now? For now I am forced to use the old versions as the new ones are just un useable...some 'upgrade'!
Phil

Me too! Seems whenever I run more than one CC app I get out of memory errors. I have Win 7 with 32GB ram. Only have this problem with CC 2014, not CS6.

Need Help with running expect script on MAC OS

Hi Guys,
I'm having an issue with running an expect script on my Mac Mini with Mac OS x 10.7.5. I think the script is correct but the not sure why its not working.
The script is as below and also teh error from Xtern or terminal when i try to run it.
#!/usr/bin/expect
set telnetAddr "172.22.22.254"
set telnetAddr1 "172.22.22.252"
set username "ww"
set passwords "ww"
set enablepassword "ww"
spawn telnet $telnetAddr
expect "Username: "
send "username\r"
expect "Password: "
send "$passwords\r"
expect "Orange-ISRGW>"
send "enable\r"
expect "Password: "
send "$enablepassword\r"
expect "Orange-ISRGW#"
send "sh flash\r"
expect "Orange-ISRGW#"
send "delete flash:c1140-k9w7-tar.default.JAR\r"
expect "Delete flash:/c1140-k9w7-tar.default.JAR? [confirm]"
send "\r"
expect "Orange-ISRGW#"
send "exit/r"
interact
here is what happens when i try to run it. This is just a test script before i re-write it to do what i intened to use it for.
sh-3.2# ls -al Text-Script.txt
-rwxrwxrwx@ 1 root wheel 592 Dec 6 08:36 Text-Script.txt
sh-3.2# more Text-Script.txt
#/!/usr/bin/expect -f
set telnetAddr "172.22.22.254"
set username "ww"
set passwords "ww"
set enablepassword "ww"
spawn telnet $telnetAddr
expect "Username: "
send "username\r"
expect "Password: "
send "$passwords\r"
expect "Orange-ISRGW>"
send "enable\r"
expect "Password: "
send "$enablepassword\r"
expect "Orange-ISRGW#"
send "term length 0\r"
expect "Orange-ISRGW#"
send "sh flash\r"
expect "Orange-ISRGW#"
send "delete flash:c1140-k9w7-tar.default.JAR\r"
expect "Delete flash:/c1140-k9w7-tar.default.JAR? [confirm]"
send "\r"
expect "Orange-ISRGW#"
send "exit/r"
sh-3.2#
sh-3.2# pwd
/usr/bin
sh-3.2# Text-Script.txt
/usr/bin/Text-Script.txt: line 8: spawn: command not found
couldn't read file "Username: ": no such file or directory
/usr/bin/Text-Script.txt: line 10: send: command not found
": no such file or directory:
/usr/bin/Text-Script.txt: line 12: send: command not found
": no such file or directorySRGW>
/usr/bin/Text-Script.txt: line 14: send: command not found
couldn't read file "Password: ": no such file or directory
/usr/bin/Text-Script.txt: line 16: send: command not found
": no such file or directorySRGW#
/usr/bin/Text-Script.txt: line 18: send: command not found
": no such file or directorySRGW#
/usr/bin/Text-Script.txt: line 20: send: command not found
": no such file or directorySRGW#
/usr/bin/Text-Script.txt: line 22: send: command not found
": no such file or directorylash:/c1140-k9w7-tar.default.JAR? [confirm]
/usr/bin/Text-Script.txt: line 24: send: command not found
": no such file or directorySRGW#
/usr/bin/Text-Script.txt: line 26: send: command not found
sh-3.2#
sh-3.2#
sh-3.2# ./Text-Script.txt
./Text-Script.txt: line 8: spawn: command not found
couldn't read file "Username: ": no such file or directory
./Text-Script.txt: line 10: send: command not found
": no such file or directory:
./Text-Script.txt: line 12: send: command not found
": no such file or directorySRGW>
./Text-Script.txt: line 14: send: command not found
couldn't read file "Password: ": no such file or directory
./Text-Script.txt: line 16: send: command not found
": no such file or directorySRGW#
./Text-Script.txt: line 18: send: command not found
": no such file or directorySRGW#
./Text-Script.txt: line 20: send: command not found
": no such file or directorySRGW#
./Text-Script.txt: line 22: send: command not found
": no such file or directorylash:/c1140-k9w7-tar.default.JAR? [confirm]
./Text-Script.txt: line 24: send: command not found
": no such file or directorySRGW#
./Text-Script.txt: line 26: send: command not found
sh-3.2#

Works like a Charm after making the change suggested ..
macminiserver:ExpectScript Tola$ more Text-Script.txt
#! /usr/bin/expect -f
set telnetAddr "172.22.22.254"
set username "ww"
set passwords "ww"
set enablepassword "ww"
spawn telnet $telnetAddr
expect "Username: "
send "$username\r"
expect "Password: "
send "$passwords\r"
expect "Orange-ISRGW>"
send "enable\r"
expect "Password: "
send "$enablepassword\r"
expect "Orange-ISRGW#"
send "term length 0\r"
expect "Orange-ISRGW#"
send "sh flash\r"
expect "Orange-ISRGW#"
send "delete flash:c1140-k9w7-tar.default.JAR\r"
send "\r"
expect "Orange-ISRGW#"
send "sh flash\r"
interact
macminiserver:ExpectScript Tola$ ./Text-Script.txt
spawn telnet 172.22.22.254
Trying 172.22.22.254...
Connected to 172.22.22.254.
Escape character is '^]'.
User Access Verification
Username: ww
Password:
Orange-ISRGW>enable
Password:
Orange-ISRGW#term length 0
Orange-ISRGW#sh flash
-#- --length-- -----date/time------ path
2         1440 Oct 24 2013 11:23:26 -07:00 vlan.dat
3     63714548 May 3 2010 11:49:40 -07:00 c2800nm-adventerprisek9_ivs_li-mz.151-1.T.bin
5     67871024 Nov 9 2012 19:05:24 -08:00 c2800nm-adventerprisek9-mz.151-4.M5.bin
124751872 bytes available (131600384 bytes used)
Orange-ISRGW#delete flash:c1140-k9w7-tar.default.JAR
Delete flash:/c1140-k9w7-tar.default.JAR? [confirm]
%Error deleting flash:/c1140-k9w7-tar.default.JAR (File not found)
Orange-ISRGW#sh flash
-#- --length-- -----date/time------ path
2         1440 Oct 24 2013 11:23:26 -07:00 vlan.dat
3     63714548 May 3 2010 11:49:40 -07:00 c2800nm-adventerprisek9_ivs_li-mz.151-1.T.bin
5     67871024 Nov 9 2012 19:05:24 -08:00 c2800nm-adventerprisek9-mz.151-4.M5.bin
124751872 bytes available (131600384 bytes used)
Orange-ISRGW#

DP_FATAL_ERROR = Release inconsistent with running system

Hi all,
I have installed an application server for 4.7 ext.set 2 on windows while my central and database instance run on an AIX server.
After installing the application server it comes up ok and I log on.
Then when I install kernel patches for this application server (dialog instance)
It does not startup and I get the following error on dev_disp file.
CCMS: start to initalize 3.X shared alert area (first segment).
ERROR => platform patchno is 31 [dpxxdisp.c 14899]
ERROR => but my patchno is 155 [dpxxdisp.c 14900]
DP_FATAL_ERROR => Release inconsistent with running system
DISPATCHER EMERGENCY SHUTDOWN ***
If I place back the old kernel it comes up.
Please assist.
I extraced kernel patched on central instance host and I also followed notes for
setting up central transport directory in heterogeneous environment.
Any idea?

Hi,
Central instance is on latest kernel patch level (AIX_ORACLE-9_UNICODE)
and win appl server is on the same patch level (windows).
Any other idea????
It seems somehow that some trash from the other kernel is left (but where??).

When downloading the trial, has anyone run into download issues?

when downloading the trial, has anyone run into download issues?

I remembered we have weird permission issues at work. Somewhere between my Home Windows 8 machine(horrible permissions issues with network), my home mac, email and my work computer, some permission got out of whack. The workaround for this was copying the file to my desktop, back to the exact same spot on the network. This resolved all issues.

Patched ORACLE_HOME with running DBs. No issues !!

Similar Messages

Maybe you are looking for