Patches and devices not always on the network

Hello, I have a question that for some reason I can't get sorted out in my mind.
How can I use SCCM to effectively patch devices such as laptops that are not always on the network. I am not talking patching through the Internet but I am talking about wanting those devices to patch with all past deployments when they connect to the
network. Specifically how do I configure the software available time, installation deadlines and maintenance windows. What is the accepted best practice out there to handle patching like this?
I am trying to fill the holes in our patching process and any help is appreciated.
Thanks

How many of you computers are left on all night? I would suggest with even WS, it will not be many, due to power management settings. 
If they are left on then you are wasting lots of $$s on power, AC cooling costs, life span of the computer, etc. and these cost will be surprisingly high.
The point being is that MW and deploying software or SU will always be at odds with each other.
The trick is to empower you users. You do this by give your users 3-5 days to install the SU when it is best for them and if they don’t do it, the SU get applied at the deadline
with enough advance notice that they can save their work before any reboot happen.
It is always a balance act but it is hard for users/management to complain, when user are given DAYS to install something and the user don’t do it in time. There are a million
different way to “sell” this to both management and users so they see the benefit in empowering users.
Help the environment “Stay Green”
Reduce costs
Improved user satisfaction
Etc.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

  • I have a problem. When I start to sync music to my iPod touch, you have to enter the password of your account. I downloaded the game from the general account, and do not always know the password. He writes that if I do not login, then the game will be era

    I have a problem. When I start to sync music to my iPod touch, you have to enter the password of your account. I downloaded the game from the general account, and do not always know the password. He writes that if I do not login, then the game will be erased. Previously, this was not. When starting to sync music, it did not touch my programs, and now because of this music can not be transferred to iPods. PANIC AT ME! HELP

    If they are Tunes purchased music you have to sing into the account that purchased them.
    Is this the iTunes library/computer you sync with? You can rally only "sync" with one iTunes library/computer.However, yo can manually manage music and videos among different libraries/computer. See the manual method of:
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

  • My wireless internet is working with all of my other devices but my imac will not connect to the network?

    Can anyone help?  My wireless connection is working on both my iphone4S and my ipad2, but my Imac will not connect to the network.

    First run Software Update to make sure your iMac is up-to-date.
    Even though things are working OK on other devices there may still be issues with your modem or router so it's best to start there. Locate the manuals on both devices and reset each. Do the modem first then the router. Next make sure the router has up-to-date firmware. If the problem continues after updating resetting and updating both devices then download and install iStumbler and let it run for about 30 minutes. iStumbler will scan your area for the Wi-Fi networks being used, pay attention to the channels each network is set to. Most routers are  pre-set to channels 5 or 6 and if you are in a congested area and all the routers are set for channel 5 or 6 then you can see where there might be a problem. Set your router's channel to one not being used in your area, you have at least 14 channels to choose from. Also check to see if your router is using 802.11n, if it's not then it would be wise to upgrade the router to a faster device.
    Next is if you are still having issues the problem could be your ISP's DNS settings. If you want to learn about DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting . Then use the instructions below to reset the DNS settings:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences

  • What does it mean if I get blank text messages from someone but they are not coming from number they appear and disappear they are not coming over the network also emails have been moved around, has my phone been hacked?

    I Have been getting blank texts from a number, but the person who owns the niumber is not sending them, they appear then disappear, they are not coming over the network, they come even though number has been black listed, also emails have been moved, I believe by someone who is cyberstalking me but don't know how to prove it, what can I do ?

    Hi,
    When a Mac is "registered" for iMessages account with an Apple ID the Serial Number of the Mac is used to create an Auth Token as it is called for the Messages app that allows that Mac to work.
    I would guess a similar process of linking the Number of the iPhone to a Hardware fact about the device is also in place.
    I would contact Apple Support and check with them.  (you might need to speak to a Level 2 person as Level 1 people are script led and try to fit everything into Software or Hardware categories where as sorting and Apple ID (which the Number is in this case) is normally Free).
    I did find this iOS: Troubleshooting Messages - Apple Support
    It starts off about sorting SMS that is not working.
    This one has a bit on Unlinking an iPhone Number (with or without the iPhone) iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
    7:55 pm      Tuesday; January 6, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

    My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
    Ipad will connect no problem to other networks.

    First thing you need I think is to get your iMac connected to the Internet.
    Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
    After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
    If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

  • Hi. My husband and I have always shared the same iTunes account.  Since installing iCloud, all our contacts and calenders have merged on our iPhone 4, which we do not want.  How do I rectify this? Does my husband need to set up his own apple ID?

    Hi. My husband and I have always shared the same iTunes account.  Since installing iCloud, all our contacts and calenders have merged on our iPhone 4, which we do not want.  How do I rectify this? Does my husband need to set up his own apple ID?  If so, where do I need to change his email address info, so that his calender and contacts remain his?  Thank you

    You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours.  If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
    You can have as many AppleIDs as you want (or at least, as many as you have email addresses for).  You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
    You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

  • TS1398 when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

    when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to

    First, grow up.  Just because YOUR phone isn't working, doesn't mean Apple put out bad software.  I've not had any difficulty, nor has anyone else I know.  And just how is Apple risking lives with Bluetooth kits not working?  It's YOUR decision to talk on the phone or text and drive.  Not Apple's.
    We're users here, volunteering our time to help others.  Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help.  Not to mention, it makes you look absolutely foolish.
    Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
    Good luck getting help.
    GDG

  • Last night, I plugged in my nano to sync and could not pull up the summary page. It will connect and charge, but will not pop up as a "device" in left column. I can't sync. how can I fix this?

    Last night I tried to sync my IPOD nano, and could not pull up the summary page. It would connect and charge the IPOD, but did not pop up as a "device" in the left column, so I could not click it and get to summary page and sync new music. Same laptop for a year, same IPOD, synced 3 days ago with no problem. Now all of a sudden, I can't sync. No message or other window pops up to tell me if something is wrong. How can I fix this?

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • Hi.. i've got problem with my iPhone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold power and home button even reset the network setting but ended with i am not able even to turn the wifi on. does any body can help me out???

    hi..
    i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?

    See this: http://support.apple.com/kb/TS1559
    If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple.

  • My iPad2 is four weeks old and the home button will not always close the applicaton that is currently running

    My iPad2 is four weeks old and the home button will not always close the application it is currently running and the problem is getting worse and I have tried to restore the iPad but this did not improve the problem...Is this a hardware problem that I need to seek a replacement

    Your home button and power button are completely unresponsive, even when you attempt a hard reset? If so you will have to put into recovery mode and restore through itunes or possibly DFU if that does not work

  • When i download the latest version of itunes the download percent freezes, and not always at the same percentage. I have windows 7, please help!

    When downloading the latest version of itunes the download freezes everytime but not always at the same percent. I have tried selecting the download only option and still didnt work. Please help!

    Do you have Windows XP Pro?
    see https://discussions.apple.com/thread/5840089?tstart=0
    there is a stupid checkbox you must uncheck, saying "protect my computer and data from unauthorized program activity"
    You see this screen when you right-click on the ItunesSetup.exe in your Downloads folder.
    downloads>ItunesSetup.exe  (right-click)>yourself as admin & UNCHECK THAT BOX!>  conntinue with new installation and even find your old playlists still  intact!!
    This is apparently a Windows XP fix alone. MSVCR80.dll is (probably) reinstalled by Itunes under a partnership aggreement with Microsoft.
    Using the Microsoft "Fix It" utility at http://support.microsoft.com/mats/program_install_and_uninstall/en does NOT fix anything. Abandon All Hope Ye Who Run This Utility More Than Once

  • I have added about 2000 cds to itunes without the song details. as i slowly update the song titles and genres etc in itunes, it does not always update the file in explorer. is there a solution to this? thanks.

    i have added about 2000 cds to itunes without the song details. as i slowly update the song titles and genres etc in itunes,it does not always update the file in explorer.is there a solution to this? thanks.

    Windows Explorer will display tag properties for mp3 & wma files, not aac (m4a) or wav. It is possible for mp3 files to contain multiple tags but only one will be displayed. Try inspecting the problem fils with a third party tag editor to see if you can tell what is going on. For mp3 files, provided all the details that you want the file to have are displayed in iTunes, you can try using the right-click option Convert ID3 Tag > None a few times followed by Convert ID3 Tag > ID3v2.3 which may well help.
    tt2

  • TS1398 iphone 5 and sky hub? My phone connects intermittantly and quite often cannot find the network. Also does not reconnect automatically? Any ideas?

    My phone connects intermittantly and quite often cannot find the network. Also does not reconnect automatically? Most of the time says unable to join network? My laptop and ipad seem fine? Very annoying Please help!

    All the information you need is right here: http://www.apple.com/iphone/specs.html
    Notice there is no mention of WiMax.
    It doesn't really matter anyway as Sprint is rolling their WiMax network down for use by MVNOs. Actual Sprint customers will not have access to WiMax at all. It was a failed experiment.

  • I was given a 50$ iBooks gift card,  I enter the code precisely and I am always told the code is not valid... the card was bought at Bestbuy

    I was given a 50$ iBooks gift card,  I enter the code precisely and I am always told the code is not valid... the card was bought at Bestbuy

    shrinkydink54 wrote:
    ... The information I got back from support was not clear ...
    Contact Support again...
    Use this Link  >  Apple  Support  iTunes Store  Contact
    Note:
    iTunes Gift Cards are only Valid in Country of Issue.

  • HT201412 All of the sudden, in order to make the home button work on my iPad 2, I have to press it without releasing my finger and sometimes, not always, after a few seconds it responds

    All of the sudden, in order to make the home button work on my iPad 2, I have to press it without releasing my finger and sometimes, not always, after a few seconds it responds. Could this be a software glitch or a hardware problem, how can I find out and fix it

    Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
    How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

Maybe you are looking for

  • Date type parameters do not work package procedure

    a cordial greeting to the whole community, in advance thank you very much for your precious time a general way I have the following, a package in which I have a main procedure which I recible three parameters: a start date, a final, and a number of c

  • Xfce runs some apps twice at startup

    Usually Xfce runs conky and keepassx twice during the startup. I tried cleaning ~/.cache/sessions while unlogged, but it didn't work. These apps figure only once in xfce4-sessions-settings and these are my settings.

  • Which CZ-Schema tables get affected when we create Non BOM items in OCD?

    Hi, Please LIST ALL the CZ tables which gets affected when we create Non BOM structure. Or Else Atleast suggest a means where I can get which tables are getting affected(i.e, In which CZ tables rows are being inserted). Thanks. Edited by: 1008308 on

  • EBP without XI

    Hi all, Is it necessary to implement an SAP XI to send/receive XML Invoice or Purchase Order in EBP 4.0? Is it necessary to configure the Integration Engine in EBP with the role of Business System as Application System. Thank you

  • GameInput APIs in Adobe AIR 3.7

    The GameInput API is an interface that allows applications to communicate with attached game input devices (joysticks, gamepads, wands, etc). This API is only supported on Android devices running on OS version 4.1 or higher. This feature can only be