Patches and packges in 11.5.10.2 for solaris 9 to 10 upgrade

Hi All,
Im upgrading Solaris 9 to Solaris10, what are all the additional OS patches and Packages are required for APPS 11.5.10.2 on Sparc.
Thanx in advance.

Please review the following notes before starting the upgrade.
Note: 169706.1 - Oracle® Database on AIX®,HP-UX®,Linux®,Mac OS® X,Solaris®,Tru64 Unix® Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.1)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=169706.1
Note: 258247.1 - Operating System and Oracle Application Upgrade Best Practices
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=258247.1
Note: 209810.1 - How to Relink Oracle Applications 11i Programs After Upgrade or Patch of the UNIX Operating System
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=209810.1
Note: 294932.1 - Recommendations to Install Oracle Applications 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showNOT?p_id=294932.1

Similar Messages

Reports 6I and Oracle 8i(8.1.6.0) for solaris

I have downloaded Reports 6i for solaris.
When I install it a ( Curses ) based GUI.
Comes on . After installing it. Oracle
stops working ? whats wrong ? it installs
its own NET8 driver which I believe is
causing the problem.
null

The Net8 Configuration Assistant allows you to add databases into a file called tnsnames.ora. Do not manually edit this file or you will not be able to une Net8 Configuration Assistant unless you delete tnsnames.ora.
it asks me if i want to use a directory service?? please advise me what this is for and should i use it
saying no is ok.
if i say no it then asks me to pick 81, or 8 i picked 8i
8i is the correct answer here
then it asks me to enter the service name?? i dont have a clue what it means
the service name (also know as SID in 8.0) is the name of your database.
then select protocol for database you want to access?? again i have no idea
The common protocol for Oracle is TCP/IP
then a host name??
the host name (is the name of your computer or another computer you want to connect to with an Oracle database running on it).
1. To find the name of your computer, click START>SETTINGS>CONTROL PANEL
2. Open the Network Icon
3. Select the Identification tab
4. The name of your computer is listed
Good Luck,
Michael

Recent changes in patch entitlement for Solaris 10 sparc systems?

Have there been any, especially those which non-contract customers should know about?
I am running Sol 10 u3 sparc on a Sun Blade workstation. Today, I noticed that some patches already installed on my system are now considered private on SunSolve (e.g. 143510-01). Also, kernel patch 142900-04 is private! I've been using SUM to get kernel patches forever (I am at 142900-03). What happened? Hopefully this is just a glitch. I can't believe that kernel patches will be private from now on!
There is a certain Xsun security patch which I have deliberately not installed. For years, it has come up in SUM. Today, for the first time, it is gone.
I am also running Sol 10 u8 on an x86 system. No problem with patches there - all normal. I installed kernel patch 142901-04 on it today. Also without a support contract.
What is going on?

Gary,
That is a great idea. I've been wondering about other ways Oracle could handle this issue, such as charging per patch, etc. This issue applies very much to Sun Studio 12.1 (see other recent thread about SS patches in this forum). There is NO WAY I, or the organization I work for, could justify spending $1,000+ per year just for SS patches. $300+/year for OS patches may be doable, but still probably wouldn't be worth it, unless SEVERE security holes are discovered that must be patched immediately, which I have never found to be the case over the last 8 years.
Your idea sounds like an ideal solution, but I fear that it is highly unlikely that Oracle would consider it. That would make some manager look bad in having to change his/her "great plan." Oracle should find some way to differentiate big "enterprise" Solaris users from 1-2 box shops who can't afford these pricey support contracts, but still depend on Solaris. For the last 7 years, public patches and these forums have done the job for me, and I have NEVER had to initiate a service or support call or request. That is testament to the stability of Solaris and the brilliance of its engineers.

UK Public sector : Teachers Pension Patch and Functional Setup

Hi
I have a query regarding the functional setup for the above. (I am assuming / expecting answer from those who have done this setup already and they know/gone thorugh the patch readme file )
I am trying to use the code provided in the patch readme file to findout correct tier for pension contribution..In order to do that I need the Annual FTE Salary inside fast formula.
The patch readme says ,
Once the Formula has retrieved the pension contribution Rate, it needs to be
applied to the actual earnings in the period.
l_tps_emp_contr_sal = FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD
However I am getting zero value for FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD.
i.e. l_tps_emp_contr_sal is zero which is being passed to
l_EE_Contribution_Percent = to_number(GET_TABLE_VALUE
('PQP_TPA_PENSIONABLE_PAY_RANGE',
'Employee Contribution Rate',
to_char(l_tps_emp_contr_sal)))
and nothing is coming up.....
How do I get the correct value of FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD ?
The readme says following
FTE Salary/Amount
The Annual salary is the Gross Full Time Equivalent salary based on which the
band should be decided. There can be multiple elements per assignment that
could be populating this value and each element may have different
configurations for example:
a. Element may have annual value from which a period value is calculated
b. Period value to be paid
The above this can be further classified based on
a. usage of working pattern or working hours
b. Full time salary
c. Part time salary.
a. One time payment on which Annualisation may not be applied but FTE should
be applied.
b. One time payment on which Annualisation may be applied but FTE should
not be applied.
c. Annual Value on which FTE should be applied.
d. Annual Value on which FTE should not be applied
There are many more variants to the scenarios described above.
To achieve the calculation of the Gross Annual Full Time Equivalent salary
for all possible scenarios the seeded element FTE Annualised Pay should be
used by the customer.
In order for the Pension contribution rate to be determined, the FTE annual
salary effective at the period in question, must be available.
It is presumed that the FTE value will be available for the current elements
that customer uses for paying the teachers as it would be needed to determine
the actual payment value for the period.
This value will be fed to the new seeded element (FTE Annualised Pay) by the
individual element formula.
Suggested changes for determining Annual Full Time value:
Suggested changes in elements formula for determining Annual Full Time value:
The following statements should be added to the existing earnings element
formula. These are suggested changes to the existing formulae to derive the
Annual FTE salary.
Case 1: If the Element Formula has access to Annual FTE Value.
return_Annual_inf = ANNUAL_VALUE
/*Assign Annual FTE Value for this element to variable return_Annual_inf*/
Case 2: If the Element formula has access to only to Period value and
Annual FTE Value is not stored anywhere.
return_Annual_inf = (PERIOD_VALUE * PAY_STATUTORY_ANNUAL_PERIODS)
/* Assign Period Full time Value for this element multiplied by standard
DBI for annual periods to local variable return_Annual_inf */
Case 3: If the Element formula has access to only to Annual Part time value
and Annual FTE Value is not stored anywhere.
return_Annual_inf = ANNUAL_VALUE / ASG_FTE_VALUE
/* Assign Period Full time Value for this element multiplied by standard
DBI for annual periods to local variable return_Annual_inf */
Case 4: If the Element formula has access to only to Period Part time value
and Annual FTE Value is not stored anywhere.
return_Annual_inf=(PERIOD_VALUE*PAY_STATUTORY_ANNUAL_PERIODS)/ASG_FTE_VALUE
/* Assign Period Full time Value for this element multiplied by standard
DBI for annual periods then divided by standard DBI for FTE to local
variable return_Annual_inf */
Note:
The new local variable return_annual_inf should be returned from formula to
the new seeded information element FTE Annualized Pay.

Hi
I recently did an evaluation of this patch, and I did get it to work; however, in order to do so I needed to amend some other formulas for e.g. calculation of salary, so that the annualised FTE figure was returned from the formula. This was then referenced in the formula result rules for the annual salary element, to feed that new result to the seeded element provided in the patch ('FTE Annualised Pay'). That then fed the balance.
It's a major headache as you will have to similarly amend all formulas/result rules pertaining to elements that could form part of the reckonable pay for this calculation.
Where I am, we won't be using it as we had to come up with our own solution to stand any chance of being 'legal' in time for April.
Hope this is of use
Clive

I have been updating my PSE since 10. Recently I purchased PSE13 as I didn't see an update for my 12. I was changing to a new laptop as my old laptop had been patched and worked and was showing signs of giving out. It was a Window's 7OS. My new one is a W

I have been updating my PSE since 10. Recently I purchased PSE13 as I didn't see an update for my 12. I was changing to a new laptop as my old laptop had been patched and worked and was showing signs of giving out. It was a Window's 7OS. My new one is a Windows 8 OS so I bought the 13 and downloaded it on the new laptop. Our desktop had died so I downloaded the 13 on the new desk computer also. Not thinking I downloaded 13 on my old laptop as I hope to get it patched up enough to be a backup for my photography. When I tried to activate it I realized that I had downloaded it too often. I didn't know you could only use it on two computers. Learn something new every day.. Any way I removed it and now my PSE 12 does not seem to be working. Now it could be something that I did or something that is an issue with the laptop. this laptop has all the previous editions on board as I always tried to update, except for the year I got a really good deal on Black Friday. I also notice that the new laptop has a copy of PSE 12 in the program list. To my knowledge I have never deactivated any of my PSE's except the extra 13 downloaded. Bottom line, do I need to go in and deactivate previous PSE versions and removed them from my computer? I could certainly use the space and secondly, can I deactivate the PSE 12 and then go back and reacitivate it and install it again on the old laptop or the desktop, whichever I deside would be the most appropriate place for the newer program. For the PSE 12 since it is an updater for 11, does the 11 still need to be on the laptop? thanks for anyone who can understand what I am trying to say and can advise me as to my next move. Thank you very much.

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Worked example using 'patch' and 'sed' to make a pkg

I would like this to be reviewed, please. The methododology may need to be standardized a bit more. Also, of course, the way I have used scripts may be a bit controversial. Certainly, anyone who knows what they are doing could easily do without these scripts, but maybe also they are stepping stones to acquiring that sort of proficiency! Also, I would not rule out that the PKGBUILD, itself, can be criticised/ improved with guidance.
Introduction
Here is a method for creating patches for Makefiles which uses sed to convert #PREFIX# to $Startdir/pkg in literal path form, so that the build is fully portable. I asked a while back on the forum whether this was possible. Xentac held my hand, while I picked up the method from him. What follows also incorporates some of his cautions about retaining md5sum integrity. (A point about which I earlier had a weak understanding!) My thanks also to dp who sorted me out on the use of $pkgname and $origname.
Description
The PKGBUILD method is an example of automation, which these scripts follow in that variables are assigned values and then a template-like feel follows on. Despite this resemblance, you will need to make these two files executable by applying
$ chmod +x FILENAME
You will need to execute them in a terminal with the commands
$ cd YOUR_WORKING_DIRECTORY_PATH
$ ./Makefiles_ready
or
$ ./PATCHMAKER
This will all work under fakeroot, provided the files have 'user users' permissions. The attached scripts are annotated examples; and enough is provided so that the reader can fabricate his/her own Makefile_new and test out the method for his(her)self.
I reckon this might be useful practice for learning the technique. I need to mention that for full functionality postfix needs to be installed and set up so that sendmail can work, but a lot of the functionality can be tested without doing this.
The command for starting the application is
$ FaxMail
You can, of course, run it for testing purposes from $startdir/pkg/usr/bin. Note the distinction between $origname and $pkgname, which you will see in the following files.
Getting Directory and Files Ready
You could start by making a new directory in $HOME, possibly called 'TESTBED' and by creating empty files named as per the following, ready for copying and pasting. It could also be useful to create a file called HOWTO and paste these notes into it. You will then need to check the 'user users' permissions and to make the two new scripts exucutable.
Then, you are ready to roll -- completing the whole process with a straight 'makepkg' in the terminal.
File Contents
Makefiles_ready
#! /bin/sh
# Makefiles_ready... generates two clean copies of the Makefile.
origname=FaxMail
pkgver=2.3
### RESULTS:-- two appropriately named copies of clean Makefile.
### 'Makefile_new.scratch' is so named as a safeguard against
### inadvertently overwriting any earlier 'Makefile_new'. So, if you just
### want a clean 'Makefile_pristine' with which to make a new patch,
### delete the generated 'Makefile_new.scratch'.
### REQUIREMENTS:-- Either a downloaded and compressed source file
### in the main directory, and appropriate source array in PKGBUILD.
### Or just the latter.
### NOTES: If there is already a ./src_old, it should first be deleted by
### hand. If there is already a $pkgname-$pkgver.pkg.tar.gz, it will need
### to be removed or deleted. This script will produce a failed make
### but will produce the results we are looking for.
mv ./src ./src_old
makepkg -o
# downloads and extracts files; does not build.
cp ./src/$origname-$pkgver/Makefile Makefile_new.scratch
cp Makefile_new.scratch Makefile_pristine
echo ">> When and if ammended, Makefile_new.scratch "
echo ">> needs to be renamed as Makefile_new. If you do this"
echo ">> and you want to retain your earlier Makefile_new, you "
echo " should first rename it to something like Makefile_prev_new."
PATCHMAKER
#! /bin/sh
# PATCHMAKER... makes a patch file
origname=FaxMail
pkgname=faxmail
pkgver=2.3
### RESULTS:-- $pkgname-$pkgver.patch; md5sums
### REQUIREMENTS:-- Clean Makefile_pristine; Edited Makefile_new;
### PKGBUILD ammended to include $pkgname-$pkgver.patch in source array.
### '#PREFIX#' stands in for '$startdir/pkg' -- see the sed command
### in PKGBUILD which inserts the required literal path, prior to making
### for real.
### It is a good idea to look at the patchfile produced here, and checkout by
### eye that the lines set for deletion are really from the Makefile_pristine.
### The two scripts have worked consistently, according to my tests.
### Makefiles_ready can be used to ensure you have clean makefile copies
### to start from.
diff -aur Makefile_pristine Makefile_new >$pkgname-$pkgver.patch
makepkg -go
## tests sources and produce md5sums; does not start the build process.
echo ">> Check $pkgname-$pkgver.patch"
echo ">> If it is OK, paste md5sums into PKGBUILD"
PKGBUILD
# $Id: PKGBUILD, $
# Maintainer:
origname=FaxMail
pkgname=faxmail
pkgver=2.3
pkgrel=1
pkgdesc="A front end for sending faxes via email."
url="http://wol.ra.phy.cam.ac.uk/FaxMail/"
depends=('tcl' 'tk' 'imagemagick' 'postfix')
makedepends=('tcl' 'tk')
conflicts=()
replaces=()
backup=()
install=
source=(ftp://sunsite.unc.edu/pub/Linux/apps/serialcomm/fax/$origname-$pkgver.tar.gz
./$pkgname-$pkgver.patch)
md5sums=('55dc96aee65ccd3bee2ec38bb6ca0ffd' 'b419add4472576a2a4fc4272e8c7da48')
build() {
cd $startdir/src/$origname-$pkgver
patch Makefile $startdir/src/$pkgname-$pkgver.patch
sed -i "s%#PREFIX#%$startdir/pkg%g" Makefile
mkdir -p $startdir/pkg/usr/bin/ $startdir/pkg/usr/man/man1/
$startdir/pkg/usr/info/
make
make install
faxmail-2.3.patch
--- Makefile_pristine 2004-08-21 20:12:23.000000000 +0100
+++ Makefile_new 2004-08-20 12:28:29.000000000 +0100
@@ -3,19 +3,19 @@
# where can I put the FaxMail wrapper and the tryfax executable
-INSTALLBINPATH = /usr/local/bin
+INSTALLBINPATH = #PREFIX#/usr/bin
# where can I put the FaxMail manual
-INSTALLMANPATH = /usr/local/man
+INSTALLMANPATH = #PREFIX#/usr/man
# where can I put the FaxMail info page. If you don't have gnu info,
# you can set this to /tmp or something. If you do, remember to add
# in an entry to the `dir' file.
-INSTALLINFOPATH = /usr/info
+INSTALLINFOPATH = #PREFIX#/usr/info
# what is the toplevel FaxMail directory.
# Contains the coverage list and FaxMail.tcl script.
-FAXMAIL_DIR = /usr/local/lib/FaxMail
+FAXMAIL_DIR = #PREFIX#/usr/lib/FaxMail
# external program locations
@@ -23,7 +23,7 @@
WISH_CMD = /usr/bin/wish
# where can I find smail or sendmail
-MAIL_CMD = /usr/lib/sendmail
+MAIL_CMD = /usr/sbin/sendmail
# where can I store temporary files
TMP_DIR = /tmp
@@ -39,7 +39,7 @@
CFLAGS =
LDFLAGS =
# Uncomment the following line if linking of tryfax fails.
-#LDFLAGS = -lresolv
+LDFLAGS = -lresolv

I have looked at possibilities for executing
$ makepkg -o -p Makefiles_ready
and
$ makepkg -go -p PATCHMAKER
The second is a serious candidate for doing it that sort of way. The first, however, needs the embedded makepkg and encasing with makepkg therefore executes that process a second time.

Best Practice for Portal Patches and effort estimation

Hi ,
One of our client is applying the following patches
1. ECC 6.0 SP15(currently SP14)
2. ESS MSS SP15(currently SP14 with some level of functional customization )
3. EP 7 SP18(currently SP14)
We would like to kwow the best practice for applying portal patches and the effort estimation for redoing the portal devt on the new patch.
o   What is the overall level of effort with applying Portal patches?
o   How are all the changes to SAP objects handle? Do they have to be
     manually re-entered?
o What is the impact of having a single NWDI instance across the
    Portal Landscape during the Patch process?
Regards,
Revathi Raju.

Hi Revathi,
o What is the overall level of effort with applying Portal patches?
overall effort to apply the patch is apprx 1/2-1 days for NW7 system. This is exclude the patch files download because it's based on your download speed.
o How are all the changes to SAP objects handle? Do they have to be
manually re-entered?
Depending on your customization. Normally it wont effect if you created the customzation application apart from SAP standard application
o What is the impact of having a single NWDI instance across the
Portal Landscape during the Patch process?
Any change that related to NWDI, you might be need to re-deployed from NWDI itself.
Thanks
Regards,
AZLY

Help please - Bad crashing, freezing, lines and pale patches and more

I wonder if anyone can help me. I am not very technobod and there are progressively awful problems on my Mac until it is now so slow.
I need to fix it before it dies altogether, or I throw it out of the window.....
Problems:-
Thin black lines randomly appearing across the windows.
Ghosting of windows, they leave another version when moved.
Sometimes windows just white out in areas with scribbly lines like pretend text.
Sometimes windows have large bare patches all of a sudden or go see through
Programs keep just quitting for no reason.
The whole computer just freezes every now and then. Sometimes it waits and returns, occasionally it crashes completely.
It is really painfully slow and can take me considerable minutes to open a new window or get something else up on screen.
The tool bar sometimes goes all skeletal with no background.
Loads more silly things like this... all random.
It is driving me absolutely potty. It's only used by me doing emails, filing pics, designing jam labels, letters, going on forums and things. I don't give it loads to manage unless I'm doing something spectacularly stupid. This computer ought to be big enough to run a design studio....
I have tried mackeeper, found it gave more problems than it solved, and uninstalled that, I've tried Clean my mac and only cleaned some, I left the universal binaries and the Caches alone. I then tried Onyx and fixed some listings (I kept the report) and cleaned up the caches in that, then restarted.
It is now even slower than before I started fixing it, and all of the problems are still here. I've got time machine for back up.
What can be going wrong? Is anyone able to help over the next couple of days?

It has taken me this long to reply to you because it is so slow.
Here is a pic
[IMG]http://i48.tinypic.com/2rr6kqd.jpg[/IMG]
OSX 10.6.8 Snow lepoard
Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac6,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.16 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          1 GB
Bus Speed:          667 MHz
Boot ROM Version:          IM61.0093.B07
SMC Version (system):          1.10f3
I will try the safe mode and see what happens. Thank you for helping me. It is really appreciated. I will be some time.... but will be back.

Oracle Application Manager - Patching and Utilities

Is there a section within the Patching and Utilities part of Oracle Application Manager where you can view the Navigation Path to forms where any changes were made/updated by the patch?
Thanks

864641 wrote:
Is there a section within the Patching and Utilities part of Oracle Application Manager where you can view the Navigation Path to forms where any changes were made/updated by the patch?
ThanksYes -- OAM > Patching and Utilities > Search for the Patch > Click on Details > Click on "Files Copied" and you will see the list of copied/updated form/reports/sql ..etc
OAM Usage And Navigation [ID 352235.1]
http://docs.oracle.com/cd/E18727_01/doc.121/e12148/T531058T531064.htm
Thanks,
Hussein

Have you ever seen a 24+ hour delay on a scheduled task to patch and reboot your server?

Our OS admins set up a schedule so that our SharePoint servers would patch and reboot once a month on the weekend during a scheduled time.
This past weekend, 3 of the 4 SP 2010 servers in the farm patched and rebooted as expected.
One of the servers (this is Windows 2012) was patched - but the reboot didn't occur until over 48 hours later.
I don't see anything in the event logs or the 14 hive logs that indicates the reason for the delay. The OS admins verified that the reboot was scheduled to occur at the scheduled time.
Has anyone else encountered anything like this?

My OS Admin has requested I correct one thing in this question.
> It isn’t really a ‘scheduled task’ that is forcing the machine to reboot. WSUS is sending patches to the machine based on registry settings.
>When it is done, the machine is supposed to reboot within 15 min.
> Also, in our case the patches installed around 6pm on the 1<sup>st</sup> and the machine rebooted on the 4<sup>th</sup> at around 9:40 am.
> This means about 62+ hours had passed.

What r the new patches and plugin for MI7.0

Hi
Please tell me what are the patches and plugins required for developing MI7.0 application??
Also send me the link for downloading this patches and plugins...
Regards
Ruturaj

i m closing this thread.....if some one got anw plz replay me

ACS 5.2 Solution Engine Patches and Installs

Hi
Im trying to upload the 5.2 patches to the ACS Solution Engine so i can install the updates.
Does anyone know how to do this or know the links that show how to do this??
The User Guide documentation isnt very helpful.
Thanks
Marco

Hi Marco,
Here is the link for downloading ACS5.2 patches :
http://www.cisco.com/cisco/software/release.html?mdfid=283107438&flowid=18604&softwareid=282766937&release=5.2.0.26&relind=AVAILABLE&rellifecycle=&reltype=latest
Downlaod any patch and place in the FTP/SFTP server in your enviroment
Login to the ACS CLI :
Create a repository:
acs/admin(config)# repository myrepository
acs/admin(config-Repository)# url sftp://starwars.test.com/repository/system1
acs/admin(config-Repository)# user luke password skywalker
acs/admin(config-Repository)# exit
after that run this command :
acs patch install patch-name.tar.gpg repository repository-nameInstalling an ACS patch requires a restart of ACS services.Would you like to continue? yes/no
once done you can do a sh version and see the acs5.2 with the new patch.
Also when you download the patch there is also read me with similar instructions.
Herre is the link for acs5.2 patch 5 read me link :
http://www.cisco.com/web/software/282766937/37718/Acs-5-2-0-26-5-Readme.txt
Thanks
Waris Hussain

Patches and SunSolve

I have already mentioned in a couple of previous postings that, I am trying to install
studio 11 on a system on which Forte Developer 7 is already installed.
My question is, if I install studio 11 , is it still necessary for me to run
"version libC*" command under /usr/lib directory in order to check whether latest
patches are installed or not ?
I am under the impression that : I need not , as I am installing Sun studio 11 which is
the latest studio available. Can any body please confirm this ?
In case I am supposed to check whether latest patches are installed or not, the document says
I need to register myself with SunSolve. When I tried to register myself with SunSolve it asked me to
enter Service Plan. But I am not sure which Service plan I should enter . Can any body help me ?
Thanks,
Ramesh.

When you install Sun Studio 11, you have the option of also installing the required Solaris patches. You should accept that option, because Studio 11 will not run properly if the requried patches are not present. The patch installer will update a file only if it is a newer version than the one already on the system.
Some of the patches are for system libraries like the C++ runtime libraries. There is only one copy of each of these libraries on the system, installed in /usr/lib, and shared by all compilers and programs that need them. Old compilers can use new versions of these libraries, so it is always safe to install the newest patch.
Sun's upport model for free Solaris and free compilers is that most patches require a support contract. The current exceptions are security patches, patches for Sun Studio, and Solaris patches required by Sun Studio.
If you go to the Sun Studio patch page
http://developers.sun.com/prodtech/cc/downloads/patches/index.jsp
you should be able to follow the links to the Sun Studio and required Solaris patches, and download them directly.

How can I do to install Patch and RDBMS using SILENT mode in a Pentium 4 ?

I was installing the Oracle 8.1.6.0.0 in remote machines using a SILENT mode normally. But now, I`m having a problem with the Pentium 4. I need to apply a patch because of the bug number 1507768. And, after apply the patch, I don't get to install using the same response file (in a SILENT mode). How can I do to install the patch and the RDBMS using a SILENT mode in a Pentium 4?

I've created a new domain with this command:
$ asadmin create-domain adminport 18000 user admin dmRemineTest
I've installed the serviceWindows with this script:
SETLOCAL
SET I=C:\Sun\SDK
c:\windows\system32\sc.exe create JCAPS6U1_dmRemineTest binPath= "%I%\lib\appservService.exe \"%I%\bin\asadmin.bat start-domain dmRemineTest\" \"%I%\bin\asadmin.bat stop-domain dmRemineTest\"" start= auto DisplayName= "JCAPS6U1_dmRemineTest"
pause
ENDLOCAL
like the one suggest me in this forum, and thanks for it but now i have an other problem. I've started the domain dmRemineTest and it is running:
asadmin> list-domains
dmRemineTest running
domain1 not running
Command list-domains executed successfully.
I'm proving to access to eManager at link: http://intaliodevsrv:15000/eManager/Welcome.do
inserting this informations required:
Server Type: Sun Java System Application Server Domain (9.1)
Host Name: localhost
HTTP Administration Port: 18000
User Name: admin
Password: adminadmin
I insert into HTTP Administration Port 18000 from here:
<http-listener acceptor-threads="1" address="0.0.0.0" blocking-enabled="false" default-virtual-server="__asadmin" enabled="true" family="inet" id="admin-listener" port="18000" security-enabled="false" server-name="" xpowered-by="true"/>
When I click on Connect to Server, eManager response with this message:
Connection Failed. Please check the following:
- Server Type is correct.
- Server is running.
- Hostname and Port number(s) are correct.
- Server SSL configuration.
How can I solve the problem?

Patches and packges in 11.5.10.2 for solaris 9 to 10 upgrade

Similar Messages

Maybe you are looking for