Patches Apply After 10g report migration

Hi All,
I am migrated 10g report into 11g.After that can i install 11g patches?It will impact any report issues or ?
It will impact means i will loss the reports.
Thanks
Gram

Hi,
There won't be any issue patch will fixes bugs only it wont affect existing report
Thanks
Deva

Similar Messages

Problem while Pro*C compilation on Unix after 10g database migration.

I am getting the following error while compiling Pro*C code after 10g Database migration,
ld: 0706-006 Cannot find or open library file: -l trace10
ld:open(): A file or directory in the path name does not exist.
I am using a Makefile for compilation and this makes direct reference to library -ltrace10
The $LIBPATH value is : /oracle/app/oracle/product/10.2.0/ora10gdb/lib:/usr/lib:/lib
Please guide.
Thanks in advance
Kaustubh

I am getting the following error while compiling Pro*C code after 10g Database migration,
ld: 0706-006 Cannot find or open library file: -l trace10
ld:open(): A file or directory in the path name does not exist.
I am using a Makefile for compilation and this makes direct reference to library -ltrace10
The $LIBPATH value is : /oracle/app/oracle/product/10.2.0/ora10gdb/lib:/usr/lib:/lib
Please guide.
Thanks in advance
Kaustubh

Clarification on Patches applied after installing NCOMP

Clarification on Patches applied after installing NCOMP and reapplying patchset
Note : 293658.1 10.1 or 10.2 Patchset Install Getting ORA-29558 JAccelerator (NCOMP) And ORA-06512
Extract:
"Note: If you have one-off patches on top of a 10.1.0.x or 10.2.0.x patchset
they do NOT need to be rollback and reapplied, they can remain."
Note 452024.1 Is NCOMP (JAccelerator) mandatory ?
Extract:
-You need to re-apply one-off patches that were applied prior to installing NCOMP component.
Which statement is true ?
For instance, CPU / normal one-off patch is applied in OracleHome without NCOMP
Now, NCOMP is installed
1- Do we have to re-apply the patch.
2- Do we have to rerun the post installation steps at the database level ? If any fix for NCOMP was there in the CPU, will it be there at the database level if we are not running the post installation steps ?
3- If ORACLE_HOME is 10.2.0.3.0, after installing NCOMP, 10.2.0.3.0, patchset has to be re-applied, what is the impact of this action on patches already applied

Hi ,
Please update on this . As I also required this information . And also the steps how to install it . As I haven't foung it ..
Regds
Rahul

Which are the patches applied in 10g

hi all,
how we will find which are the patches applied in 10g from table.

No, it's not, as some patches require no update of the underlying databases. So the databases may not even know what patches are installed.
That said, you can always tell what patchset you are running (9.2.0.1, 9.2.0.4, 10.2.0.2) from v$instance.

Oracle 10g reports migration to Oracle 11g migration

I have migrated oracle 10g reports to Oracle 11g reports and generated REP file. But when we execute REP file using RWRUN.EXE I am getting below error.
ERR REP-50125: rwbuilder.conf:java.lang.NullPointerException
ERR java.lang.NullPointerException
to avoid this I tried below work arround which was posted in "https://forums.oracle.com/forums/thread.jspa?threadID=2365028" URL. but not success.
1. Go to C:\Oracle\Middleware\asinst_1\config\FRComponent\frcommon\tools\admin
2. Make a backup of the file 'cauprefs.ora'
3. Open up the file in a text editor:
--In the file, look for:
Reports.PluggableDataSourceFactories =
("oracle.reports.plugin.datasource.xmlpds.XMLDataSourceFactory",
"oracle.reports.plugin.datasource.jdbcpds.JDBCDataSourceFactory",
"oracle.reports.plugin.datasource.textpds.TextDataSourceFactory")
--Replace the value to: Reports.PluggableDataSourceFactories = ()
4. Save the file and try running Reports Builder again. Data Model should open up without crashing.
Could you please help me to resolve this issue.

When I use rwrun.bat report is not invoking i use below command line. I am executing rwrun.bat from C:\Oracle\Middleware\asinst_1\config\reports\bin path.
rwrun.bat report="C:\Program Files\prnsrv\advices\01\bcacuchq.rep" userid=dbuserid/[email protected] desformat=pdf DESTYPE=file DESNAME="c:\temp\test.pdf" TRACEFILE="C:\TEMP\test.LOG" PRM_BRCH_CODE=781 PRM_PROD_CODE=BC PRM_PROD_REF_ID=BC11100142 PRM_ORDER_COL=DELIVERY_MODE PRM_CHQ_RPT=Y
and log is generating as below
===========================
LOG :
Report: C:\Program Files\prnsrv\advices\01\bcacuchq.rep
Logged onto server:
Username:
*** Starting up the JVM ***
JVM CLASSPATH variable is:
C:\Oracle\Middleware\Oracle_FRHome2\reports\jlib\rwbuilder.jar;C:\Oracle\Middleware\Oracle_FRHome2\reports\jlib\rwrun.jar;C:\Oracle\Middleware\Oracle_FRHome2\jlib\zrclient.jar
*** JVM started successfully ***
====================================

Reports Migration from 6i to 10g

In my Project we are having many reports .and we are trying to Migrate those from 6i to 10g can anyone tell me what are the suggestions i can make during this process .. i am the only person who is going to involve in complete migration solely. Any Ideas and suggestions welcome ..

Hello,
Oracle Reports: Migration from 6i to 10g
http://www.oracle.com/technology/products/reports/migration/index.html
FAQ Migration
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm
Regards

Report giving error after 10g upgrade

We have a custom report which is erroring out after 10g upgrade. Following is the log file-->
**Starts**24-APR-2009 04:11:21
ORACLE error 3113 in FDPSTP
Cause: FDPSTP failed due to ORA-03113: end-of-file on communication channel
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P
APP-FND-01564: ORACLE error 1000 in AFPGRG
Cause: AFPGRG failed due to ORA-01000: maximum open cursors exceeded.
The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
Start of log messages from FND_FILE
End of log messages from FND_FILE
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P.A
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected to ORACLE
Contact your system administrator or support representative.
Shutting down Concurrent Manager : 24-APR-2009 04:11:51
ORA-01041: internal error. hostdef extension doesn't exist
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01041: internal error.
hostdef extension doesn't exist
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
_ 3 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []
I already increased the cursors from 700 to 900
How to fix it?

Hi,
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []Refer to the lookup to get more details about this error.
Note: 153788.1 - Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=153788.1
I already increased the cursors from 700 to 900
How to fix it?Is it possible to increase OPEN_CURSORS to a higher value? Enable trace on this concurrent program, and see if this collects more details about the error.
Regards,
Hussein

Not applied Patch 5117016 after 10.2.0.2 patch set.

Hi ,
database has been upgraded to 10gR2 on solaris 64bit. Patch 5117016 has not been applied after 10.2.0.2 patch set applied. but after that DST patches were applied. here my concern is should i rollback DST patches in order to apply Patch 5117016. as per metalink note:394933.1
please advise me.
thanks in advance,
Hussain.

Hi,
I have got problem when I was installing 10.2.0.3.0 Patch Set after succeed installation of Oracle 10.2.0.1 on Windows server 2003.
Server was shut down by a coworker middle of installation of 10.2.0.3.0 Patch Set resulting that Patch 5556081 : was not applied ( see below opatch_history.txt ) .
When I try to apply 10.2.0.3.0 again it fails saying that Patch Set is already installed.
When I run OUI to see what has been installed I see only Interim Patch #5557962.
I didn't create any database between the installations.
So I can't apply OpachSet README.html advice .
Uninstall PathSet :
C:\> sqlplus /NOLOG
SQL> CONNECT SYS/SYS_Password AS SYSDBA
SQL> SHUTDOWN IMMEDIATE
SQL> EXIT
Should I try to Create a Database and after that apply OpachSet README.html advice
C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch_history.txt
Date & Time : Fri Aug 31 10:56:03 CEST 2007
Oracle Home : C:\oracle\product\10.2.0\db_1
OPatch Ver. : 10.2.0.3.0
Current Dir : C:\oracle\product\10.2.0\db_1\sysman\patches
Command : apply -silent -local -oh C:\oracle\product\10.2.0\db_1 C:\oracle\product\10.2.0\db_1/sysman/patches/5557962
Log File : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2007-08-31_10-56-03AM.log
/regards

The Update could not be installed (patch apply failed) this keeps happening after it has told me to update Why ?

while running Firefox it comes on the screen saying security update so after it ties to update this comes on the screen "The Update could not be installed (patch apply failed)" I am running Firefox 6.0 and don't seem to have any other issues with it but it asks me several times to do this update but still says it cant do it
I am running windows vista

If files already have been downloaded then remove the files in the updates and updates\0 folder.
You can also delete the active-update.xml file.
*http://kb.mozillazine.org/Updates_reported_when_running_newest_version
Software Update not working properly:
*http://kb.mozillazine.org/Software_Update
* C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates

Applying security patch to Oracle 10G on Linux

Hello,
I'm new to Oracle DBA world, need to apply security patch to Oracle 10G on Linux server, any tips and notes would be appreciated.
thanks
Sam

Manish,
1. I have to upgrade the database version from 10.2.0.2 to 10.2.0.4 on Linux, Is there any proper documentation which will help me out?Please refer to the following document.
Note: 454750.1 - Oracle Apps Release 12 with Oracle Database 10.2.0 interoperability notes
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=454750.1
2. What are the types of oracle database patches? what is the proper procedure to apply those kind of patches to Oracle 10g on Linux?
Most of the patches in this upgrade are database patches (which should be applied using opatch). The main upgrade patch (Patch 6810189 - 10.2.0.4 patch set) should be applied using Oracle Universal Installer (runInstaller).
Always follow the steps in the patch README file before applying any patch.
Regards,
Hussein

9i Report Builder stops working after 10g install

I have the 9i Developer Suit installed and recently I installed the 10g Developer Suit. After installing the 10g Developer Suit the 9i Report Builder stopped working. When I try to start it, it hangs at the launch screen. All the other apps in the 9i and 10g Developer Suits seem to work except for the 9i Report Builder. Please Help.

Nope. The 10g report builder works fine. The issue is only with the 9i report builder.

MS11-061 still vulnerable after patch applied

I have a Windows 2008 R2 Server serving as an RDS gateway. We also use Qualys to do vulnerability scanning. Qualys is still reporting: Microsoft Windows Remote Desktop Web Access Elevation of Privilege Vulnerability (MS11-061).
This server is fully patched. I have looked through all patches applied and I see where KB2546250 has been applied. If I try to apply it again I just get a pop up that says it is already there. I need to get rid of this entry on my Qualys
report for audit purposes. What could be the problem? Thanks
Tony G

What could be the problem?
The problem... most likely... is that Qualsys is WRONG. If the machine is fully patched, then there's not much else you can do to the machine, eh? You wanna get rid of the entry.. call Qualsys and have 'em prove why they're right.
Why do people automatically assume that a third-party scanner is more accurate than the native tools that come from the OS vendor who supplies the OS patches?
Yes, by all means, use a third-party scanner! The purpose of a third-party scanner is to find stuff you've MISSED. But if you know for a fact that you've not missed anything, then don't let the third-party scanner waste hours of your time trying to
prove a negative.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Generating PDF from report - migrating from 6i to 10g

hi ,
i ran my existing report which is developed in oracle 6i in 10g report builder .
i got the output perfectly.
But when i say Generate to file PDF ,I Am getting below error msg .
REP-0069 :Internal error
REP-57054:In-process job terminated:Terminated with error:
REP-214718514:Unable to retreive a string from the Report Builder message file.
REP-2147418514
can anyone tell me what should i do to overcome this ..
Thanks in Advance.

Hello,
How do you execute your Reports ?
Do you execute it from the Builder ?
If you execute it from the Builder, do you use Run Web Layout or Run Paper Layout ?
(If you have upgraded a Reports From 6i, there is no web layout , so you have to use the Run paper Layout
The web layout is something new that appeared in Reports 9.0.2)
Regard

10G Reports Hyperlink has strange characters after domain address

To all,
I have a 10G Report that uses a BeforeParamForm trigger to build a parameter called "START_URL".
When the BeforeParamForm trigger ends the parameter START_URL contains the value:
http://SEPAP33:80/reports/rwservlet?omst1
I am using this parameter so that I don't have to hard-code the domain address on the Hyperlink line of the field property.
On the Paper Layout I have a Field called 'Premise' that has the Hyperlink property filled in as:
:start_url+report=e:/apps/oms/premise_outage_detail.rdf+desformat=pdf+paramform=no+p_sdate=&sdate+p_edate=&edate+p_premise=&premise_id
When the report executes it should set the Hyperlink line to look like this: http://SEPAP33:80/reports/rwservlet/?omst1
report=e:/apps/oms/premise_outage_detail.rdfdesformat=pdf+paramform=no+p_sdate=01-jan-07+p_edate=01-aug-2007+p_premise=97
Unfortunately when the report runs the first section looks like this:
http://SEPAP33:80/reports/rwservlet/getfile/HWnZXZIgVBOPS/RLkg==/+report=...(the rest is correct)
Does anybody know what is causing this Hyperlink to be built improperly with "getfile/HWnZXZIgVBOPS/RLkg==" in there? I have used SRW.MESSAGE to output the :Start_URL and it is correct.
I have also tried using SRW.set_hyperlink in the format trigger. The wrong URL value also comes up this way.
Thanks,
Troy

Hello,
The URL :
http://SEPAP33:80/reports/rwservlet/getfile/HWnZXZIgVBOPS/RLkg==/
is a typical URL added by the Reports servlet in the BASE HREF tag.
Regards

Migrating 10g report to Bi Publisher 11g

Hello,
I have an existing 10g report from BI Publisher.
I would like to upgrade to 11g. in that process, i created a folder in 11g, with catalog menu option.
But when i try to upload existing datamodel from 10g, my upload fails.
Can any one advise on this?
Or should I create the data model from scratch by copying the existing data template query and pasting to the datamodel code tab section in 11g?
please advise
thanks

Check this
http://clairehu.com/2012/04/02/deploying-obiee-11g-bi-publisher-reports/

Patches Apply After 10g report migration

Similar Messages

Maybe you are looking for